890 resultados para Clean development mechanism projects
Resumo:
Mode of access: Internet.
Resumo:
"This draft report represents five years of work by the National Water Commission studying all the nation's water problems and needs."
Resumo:
Thesis (Ph.D.)--University of Washington, 2016-06
Resumo:
Purpose - The main objective of the paper is to develop a risk management framework for software development projects from developers' perspective. Design/methodology/approach - This study uses a combined qualitative and quantitative technique with the active involvement of stakeholders in order to identify, analyze and respond to risks. The entire methodology has been explained using a case study on software development project in a public sector organization in Barbados. Findings - Analytical approach to managing risk in software development ensures effective delivery of projects to clients. Research limitations/implications - The proposed risk management framework has been applied to a single case. Practical implications - Software development projects are characterized by technical complexity, market and financial uncertainties and competent manpower availability. Therefore, successful project accomplishment depends on addressing those issues throughout the project phases. Effective risk management ensures the success of projects. Originality/value - There are several studies on managing risks in software development and information technology (IT) projects. Most of the studies identify and prioritize risks through empirical research in order to suggest mitigating measures. Although they are important to clients for future projects, these studies fail to provide any framework for risk management from software developers' perspective. Although a few studies introduced framework of risk management in software development, most of them are presented from clients' perspectives and very little effort has been made to integrate this with the software development cycle. As software developers absorb considerable amount of risks, an integrated framework for managing risks in software development from developers' perspective is needed. © Emerald Group Publishing Limited.
Resumo:
The mechanism of muscle protein catabolism induced by proteolysis-inducing factor, produced by cachexia-inducing murine and human tumours has been studied in vitro using C2C12 myoblasts and myotubes. In both myoblasts and myotubes protein degradation was enhanced by proteolysis-inducing factor after 24 h incubation. In myoblasts this followed a bell-shaped dose-response curve with maximal effects at a proteolysis-inducing factor concentration between 2 and 4 nM, while in myotubes increased protein degradation was seen at all concentrations of proteolysis-inducing factor up to 10 nM, again with a maximum of 4 nM proteolysis-inducing factor. Protein degradation induced by proteolysis-inducing factor was completely attenuated in the presence of cycloheximide (1 μM), suggesting a requirement for new protein synthesis. In both myoblasts and myotubes protein degradation was accompanied by an increased expression of the α-type subunits of the 20S proteasome as well as functional activity of the proteasome, as determined by the 'chymotrypsin-like' enzyme activity. There was also an increased expression of the 19S regulatory complex as well as the ubiquitin-conjugating enzyme (E214k), and in myotubes a decrease in myosin expression was seen with increasing concentrations of proteolysis-inducing factor. These results show that proteolysis-inducing factor co-ordinately upregulates both ubiquitin conjugation and proteasome activity in both myoblasts and myotubes and may play an important role in the muscle wasting seen in cancer cachexia. © 2002 Cancer Research UK.
Resumo:
Projects of Energy Community Interest” (PECIs) is a label attached to those projects which have the highest positive impact in the largest possible number of Contracting Parties. The assessment of one hundred projects submitted as candidates, and final selection of 35 PECIs was achieved in a collaborative process undertaken by the same Task Force that contributed to the preparation of the Energy Strategy. Chaired by the European Commission, the Task Force was facilitated by the Energy Community Secretariat and benefited from technical assistance of a Consultant sponsored from the Energy Community budget.
Resumo:
In an effort to reduce the cost and size of government public service delivery has become more decentralized, flexible and responsive. Public entrepreneurship entailed, among other things, the establishment of special-purpose governments to finance public services and carry out development projects. Community Development Districts (CDDs) are a type of special-purpose governments whose purpose is to manage and finance infrastructure improvements in the State of Florida. They have important implications for the way both growth management and service delivery occur in the United States. This study examined the role of CDDs for growth management policy and service delivery by analyzing the CDD profile and activity, the contribution of CDDs to the growth management and infrastructure development as well as the way CDD perceived pluses and minuses impact service delivery. The study used a mixed methods research approach, drawing on secondary data pertaining to CDD features and activity, semi-structured interviews with CDD representatives and public officials as well as on a survey of public officials within the counties and cities that have established CDDs. Findings indicated that the CDD institutional model is both a policy and a service delivery tool for infrastructure provision that can be adopted by states across the United States. Results showed that CDDs inhibit rather than foster growth management through their location choices, type and pattern of development. CDDs contributed to the infrastructure development in Florida by providing basic infrastructure services for the development they supported and by building and dedicating facilities to general-purpose governments. Districts were found to be both funding mechanisms and management tools for infrastructure services. The study also pointed to the fact that specialized governance is more responsive and more flexible but less effective than general-purpose governance when delivering services. CDDs were perceived as being favorable for developers and residents and not as favorable for general-purpose governments. Overall results indicated that the CDD is a flexible institutional mechanism for infrastructure delivery which has both advantages and disadvantages. Decision-makers should balance districts’ institutional flexibility with their unintended consequences for growth management when considering urban public policies.
Resumo:
Fossil fuels constitute a significant fraction of the world's energy demand. The burning of fossil fuels emits huge amounts of carbon dioxide into the atmosphere. Therefore, the limited availability of fossil fuel resources and the environmental impact of their use require a change to alternative energy sources or carriers (such as hydrogen) in the foreseeable future. The development of methods to mitigate carbon dioxide emission into the atmosphere is equally important. Hence, extensive research has been carried out on the development of cost-effective technologies for carbon dioxide capture and techniques to establish hydrogen economy. Hydrogen is a clean energy fuel with a very high specific energy content of about 120MJ/kg and an energy density of 10Wh/kg. However, its potential is limited by the lack of environment-friendly production methods and a suitable storage medium. Conventional hydrogen production methods such as Steam-methane-reformation and Coal-gasification were modified by the inclusion of NaOH. The modified methods are thermodynamically more favorable and can be regarded as near-zero emission production routes. Further, suitable catalysts were employed to accelerate the proposed NaOH-assisted reactions and a relation between reaction yield and catalyst size has been established. A 1:1:1 molar mixture of LiAlH 4, NaNH2 and MgH2 were investigated as a potential hydrogen storage medium. The hydrogen desorption mechanism was explored using in-situ XRD and Raman Spectroscopy. Mesoporous metal oxides were assessed for CO2 capture at both power and non-power sectors. A 96.96% of mesoporous MgO (325 mesh size, surface area = 95.08 ± 1.5 m2/g) was converted to MgCO 3 at 350°C and 10 bars CO2. But the absorption capacity of 1h ball milled zinc oxide was low, 0.198 gCO2 /gZnO at 75°C and 10 bars CO2. Interestingly, 57% mass conversion of Fe and Fe 3O4 mixture to FeCO3 was observed at 200°C and 10 bars CO2. MgO, ZnO and Fe3O4 could be completely regenerated at 550°C, 250°C and 350°C respectively. Furthermore, the possible retrofit of MgO and a mixture of Fe and Fe3O 4 to a 300 MWe coal-fired power plant and iron making industry were also evaluated.
Resumo:
Implicit in current design practice of minimum uplift capacity, is the assumption that the connection's capacity is proportional to the number of fasteners per connection joint. This assumption may overestimate the capacity of joints by a factor of two or more and maybe the cause of connection failures in extreme wind events. The current research serves to modify the current practice by proposing a realistic relationship between the number of fasteners and the capacity of the joint. The research is also aimed at further development of non-intrusive continuous load path (CLP) connection system using Glass Fiber Reinforced Polymer (GFRP) and epoxy. Suitable designs were developed for stud to top plate and gable end connections and tests were performed to evaluate the ultimate load, creep and fatigue behavior. The objective was to determine the performance of the connections under simulated sustained hurricane conditions. The performance of the new connections was satisfactory.
Resumo:
This Paper discusses the food and beverage machines that are located at Memorial University's Grenfell Campus and endeavors to assess how much those vending machines are being used and how they affect sustainability initiatives on campus. A survey was conducted to gauge the use of vending machines, their content and what is purchased, and if participants did not purchase from thes machines they were also asked why they did not.This survey produced many other questions that are directly linked to vending machines.Water quality on campus was heavily disscussed, along with the use of bottled water and implications associated with drinking only from bottles that are thrown away. The study concludes with a discussion of the alternative choices that can be implemented to replace vending machines.
Resumo:
A recently developed novel biomass fuel pellet, the Q’ Pellet, offers significant improvements over conventional white pellets, with characteristics comparable to those of coal. The Q’ Pellet was initially created at bench scale using a proprietary die and punch design, in which the biomass was torrefied in-situ¬ and then compressed. To bring the benefits of the Q’ Pellet to a commercial level, it must be capable of being produced in a continuous process at a competitive cost. A prototype machine was previously constructed in a first effort to assess continuous processing of the Q’ Pellet. The prototype torrefied biomass in a separate, ex-situ reactor and transported it into a rotary compression stage. Upon evaluation, parts of the prototype were found to be unsuccessful and required a redesign of the material transport method as well as the compression mechanism. A process was developed in which material was torrefied ex-situ and extruded in a pre-compression stage. The extruded biomass overcame multiple handling issues that had been experienced with un-densified biomass, facilitating efficient material transport. Biomass was extruded directly into a novel re-designed pelletizing die, which incorporated a removable cap, ejection pin and a die spring to accommodate a repeatable continuous process. Although after several uses the die required manual intervention due to minor design and manufacturing quality limitations, the system clearly demonstrated the capability of producing the Q’ Pellet in a continuous process. Q’ Pellets produced by the pre-compression method and pelletized in the re-designed die had an average dry basis gross calorific value of 22.04 MJ/kg, pellet durability index of 99.86% and dried to 6.2% of its initial mass following 24 hours submerged in water. This compares well with literature results of 21.29 MJ/kg, 100% pellet durability index and <5% mass increase in a water submersion test. These results indicate that the methods developed herein are capable of producing Q’ Pellets in a continuous process with fuel properties competitive with coal.
Resumo:
Participation usually sets off from the bottom up, taking the form of more or less enduring forms of collective action with varying degrees of infl uence. However, a number of projects have been launched by political institutions in the last decades with a view to engaging citizens in public affairs and developing their democratic habits, as well as those of the administration. This paper analyses the political qualifying capacity of the said projects, i.e. whether participating in them qualifi es individuals to behave as active citizens; whether these projects foster greater orientation towards public matters, intensify (or create) political will, and provide the necessary skills and expertise to master this will. To answer these questions, data from the comparative analysis of fi ve participatory projects in France and Spain are used, shedding light on which features of these participatory projects contribute to the formation of political subjects and in which way. Finally, in order to better understand this formative dimension, the formative capacity of institutional projects is compared with the formative dimension of other forms of participation spontaneously developed by citizens.