Modelling of chloride penetration into non-saturated concrete: Case study application for real marine off shore structures

The aim of this paper is to explain the chloride concentration profiles obtained experimentally from control samples of an offshore platform after 25 years of service life. The platform is located 12 km off the coast of the Brazilian province Rio Grande do Norte, in the north-east of Brazil. The samples were extracted at different orientations and heights above mean sea level. A simple model based on Fick’s second law is considered and compared with a finite element model which takes into account transport of chloride ions by diffusion and convection. Results show that convective flows significantly affect the studied chloride penetrations. The convection velocity is obtained by fitting the finite element solution to the experimental data and seems to be directly proportional to the height above mean sea level and also seems to depend on the orientation of the face of the platform. This work shows that considering solely diffusion as transport mechanism does not allow a good prediction of the chloride profiles. Accounting for capillary suction due to moisture gradients permits a better interpretation of the material’s behaviour.

Effect of fire on the microstructure and mechanical response of structural steels for building construction

The research is an exhaustive study of the microstructure and of the stress-strain curves of structural steel S460N at temperatures typical of a fire. It includes a fractographic study of the fracture suifaces of cylindrical specimens, tensile tested at different fire scenarios, explaining the relationship between the failure micromechanisms and temperature. The paper ends with the comparison between the experimentally found strain-stress curves with that one's proposed by the EUROCODE EC3, resulting that in the case of steel S460N these are on the side ofsafety.

Construction cost and energy consumption resulting from energy retrofitting in an apartment building in Madrid (Spain).

This theoretical study analyzes the relation between the measures necessesary for the energy retrofitting of a residential building constructed in Madrid, their cost and the improvement of the energy rating of the dwellings. The aim of this work is to establish an evaluation methodology that allows developers and architects to obtain conclusions and orientates therm in the decisioin-making process. It will allow finding the most suitable cost-effective solutions in each case. This paper describes the methodology and the findings obtained. Energy retrofitting and the improvement of the energy behaviour of the building depend on the selection of the retrofitting solutions and also on the investment. In this case study to achieve the best energy rates it is necessary to improve the thermal performance of the envelope as well as the energy systems. Energy retrofitting means an increase in property value but it can't only be considered in economic terms. It is necessary to take into account unquantifiable aspects as increased comfort, improved sound insulation, livability, health, or the elimination of energy poverty situations.

The Role of Multilateral Coordination in Transport Policy: The Case of the Maghreb Countries

El WCTR es un congreso de reconocido prestigio internacional en el ámbito de la investigación del transporte y aunque las actas publicadas están en formato digital y sin ISSN ni ISBN, lo consideramos lo suficientemente importante como para que se considere en los indicadores. This paper aims at describing how multilateral cooperation policies are influencing national transport policies in developing countries. It considers the evolution of national transport policies and institutional frameworks in Algeria, Morocco and Tunisia in the last 10 years, and analyses the influence that EU cooperation programmes (particularly those within the Euromed programme initiative) and international coordination activities have played in the evolution towards efficient, sustainable transport systems in those countries. Notwithstanding the significant socioeconomic, political and institutional differences among the three countries, three major traits are common to the transport policy framework in all cases: a focus on megaprojects; substitution of traditional ministerial services by ad hoc public agencies to develop those megaprojects, and progressive involvement of international private players for the operation (and eventually the design and construction) of new projects, focusing on know-how transfer rather than investment needs. The hypotheses is that these similarities are largely due to the influence of the international cooperation promoted by the European Union since the mid- 1990s. The new decision making situation is characterized by the involvement of two new relevant stakeholders, the EU and a limited number of global transport operators. The hierarchical governance model evolves towards more complex structures, which explain the three common traits mentioned above. International coordination has been crucial for developing national transport visions, which are coherent with a regional, transnational system.

Effect of fire on the microstructure and mechanical response of structural steels for building construction

The research is an exhaustive study of the microstructure and of the stress-strain curves of structural steel S460N at temperatures typical of a fire. It includes a fractographic study of the fracture suifaces of cylindrical specimens, tensile tested at different fire scenarios, explaining the relationship between the failure micromechanisms and temperature. The paper ends with the comparison between the experimentally found strain-stress curves with that one's proposed by the EUROCODE EC3, resulting that in the case of steel S460N these are on the side ofsafety.

Diseño de una metodología CASE de desarrollo de software

En la actualidad existe una gran expectación ante la introducción de nuevas herramientas y métodos para el desarrollo de productos software, que permitirán en un futuro próximo un planteamiento de ingeniería del proceso de producción software. Las nuevas metodologías que empiezan a esbozarse suponen un enfoque integral del problema abarcando todas las fases del esquema productivo. Sin embargo el grado de automatización conseguido en el proceso de construcción de sistemas es muy bajo y éste está centrado en las últimas fases del ciclo de vida del software, consiguiéndose así una reducción poco significativa de sus costes y, lo que es aún más importante, sin garantizar la calidad de los productos software obtenidos. Esta tesis define una metodología de desarrollo software estructurada que se puede automatizar, es decir una metodología CASE. La metodología que se presenta se ajusta al modelo de ciclo de desarrollo CASE, que consta de las fases de análisis, diseño y pruebas; siendo su ámbito de aplicación los sistemas de información. Se establecen inicialmente los principios básicos sobre los que la metodología CASE se asienta. Posteriormente, y puesto que la metodología se inicia con la fijación de los objetivos de la empresa que demanda un sistema informático, se emplean técnicas que sirvan de recogida y validación de la información, que proporcionan a la vez un lenguaje de comunicación fácil entre usuarios finales e informáticos. Además, estas mismas técnicas detallarán de una manera completa, consistente y sin ambigüedad todos los requisitos del sistema. Asimismo, se presentan un conjunto de técnicas y algoritmos para conseguir que desde la especificación de requisitos del sistema se logre una automatización tanto del diseño lógico del Modelo de Procesos como del Modelo de Datos, validados ambos conforme a la especificación de requisitos previa. Por último se definen unos procedimientos formales que indican el conjunto de actividades a realizar en el proceso de construcción y cómo llevarlas a cabo, consiguiendo de esta manera una integridad en las distintas etapas del proceso de desarrollo.---ABSTRACT---Nowdays there is a great expectation with regard to the introduction of new tools and methods for the software products development that, in the very near future will allow, an engineering approach in the software development process. New methodologies, just emerging, imply an integral approach to the problem, including all the productive scheme stages. However, the automatization degree obtained in the systems construction process is very low and focused on the last phases of the software lifecycle, which means that the costs reduction obtained is irrelevant and, which is more important, the quality of the software products is not guaranteed. This thesis defines an structured software development methodology that can be automated, that is a CASE methodology. Such a methodology is adapted to the CASE development cycle-model, which consists in analysis, design and testing phases, being the information systems its field of application. Firstly, we present the basic principies on which CASE methodology is based. Secondly, since the methodology starts from fixing the objectives of the company demanding the automatization system, we use some techniques that are useful for gathering and validating the information, being at the same time an easy communication language between end-users and developers. Indeed, these same techniques will detail completely, consistently and non ambiguously all the system requirements. Likewise, a set of techniques and algorithms are shown in order to obtain, from the system requirements specification, an automatization of the Process Model logical design, and of the Data Model logical design. Those two models are validated according to the previous requirement specification. Finally, we define several formal procedures that suggest which set of activities to be accomplished in the construction process, and how to carry them out, getting in this way integrity and completness for the different stages of the development process.

Design and construction of the Barriga Dam spillway through an improved wedge-shaped block technology

The Barriga Dam (Burgos, Spain) is a unique case study because its trapezoid spillway is located on the dam body and is composed of wedge-shaped concrete blocks (WSB) that include certain relevant improvements. This note summarizes the main features of the studies, the key aspects of the final design of the WSB and their placement on the dam, and important details of the spillway design. The design team concluded the study by showing the suitability of this enhanced technology for application to small dams and ponds in the short term, even with unit flows above 5 m2/s.

Life cycle assessment as a policy-support tool: the case of taxis in the city of Madrid

This paper examined the potentialities of Life Cycle Assessment (LCA) as instrument for policy-support. To this respect, the adoption of an initiative within the Madrid Air Quality Plan (AQP) 2011–2015 regarding the substitution of diesel taxis with hybrid, natural gas and LPG alternatives was studied. Four different scenarios were elaborated, a business-as-usual scenario (BAU), the scenario of the AQP, and two extreme-situation scenarios: all-diesel (ADI) and all-ecologic (AEC). Impacts were characterized according to the ILCD methodology, focusing especially on climate change (CC) and photochemical ozone formation (PO). SimaPro 7.3 was used as analysis and inventory-construction tool. The results indicate that the shift to ecologic alternatives reduced impacts, especially those related to CC and PO. For the complete life cycle, reductions of 13% (CC) and 25% (PO) were observed for AQP against BAU (CC:1365 GgCO2, PO:13336 MgNMVOC). Deeper reductions were observed for AEC (CC:34%, PO:59%), while ADI produced slight increases in impacts if against BAU. The analysis of the use-phase revealed that the central and highest speed zones of the city benefit from the adoption of AQP. This is especially evident in zone 7, with reductions of 16% in CC and 31% in PO respectively against BAU (CCzone1:3443 kgCO2/veh·km, POzone7:11.1 kgNMVOC/veh·km).

The historical heritage of domestic architecture is a reliable model for a satisfactory design. The case of the Mediterranean region

The purpose of this paper is to expose the importance of observing cultural systems present in a territory as a reference for the design of urban infrastructures in the new cities and regions of rapid development. If we accept the idea that architecture is an instrument or cultural system developed by man to act as an intermediary to the environment, it is necessary to understand the elemental interaction between man and his environment to meet a satisfactory design. To illustrate this purpose, we present the case of the Eurasian Mediterranean region, where the architectural culture acts as a cultural system of adaptation to the environment and it is formed by an ancient process of selection. From simple observation of architectural types, construction systems and environmental mechanisms treasured in mediterranean historical heritage we can extract crucial information about this elemental interaction. Mediterranean architectural culture has environmental mechanisms responding to the needs of basics habitability, ethnics and passive conditioning. These mechanisms can be basis of an innovative design without compromising the diversity and lifestyles of human groups in the region. The main fundament of our investigation is the determination of the historical heritage of domestic architecture as holder of the formation process of these mechanisms. The result allows us to affirm that the successful introduction of new urban infrastructures in an area need a reliable reference and it must be a cultural system that entailing in essence the environmental conditioning of human existence. The urban infrastructures must be sustainable, understood and accepted by the inhabitants. The last condition is more important when the urban infrastructures are implemented in areas that are developing rapidly or when there is no architectural culture.

Construction History in Spain: the Discipline's Foundation

In the past two decades the History of Construction has started to become an independent discipline. On one hand, the number of articles, theses and books that could be assigned to this field has grown exponentially. Furthermore, there have been numerous and remarkably successful Congresses: 12 National (Spain 8; France 2; United Kingdom 1; Germany 1) and 4 International Congresses (Madrid 2003, Cambridge 2006, Cottbus 2009, Paris 2012), see Table 1 below. However, the situation is far from that corresponding to an already recognized discipline, such as the History of Art or the History of Science. There are no University chairs and departments, and in the reference databases “Construction History” is not listed as a common descriptor. This is not surprising; it reflects the inertia of academia to accept new disciplines. In what follows we will discuss the current state of discipline in Spain. Previous articles have tackled the matter. We will try to avoid unnecessary repetitions and concentrate on: 1) The activities of the Spanish Society of Construction History; 2) Its consequences on teaching and research, taken as a case study the experience in the School of Architecture of Madrid, and 3) We will give a provisional List of dissertations on Construction History read in Spain in the last forty years. First, we will try to define with the least possible ambiguity its field and its objectives. The intention is not to enter into the actual debate on the "definition" of Construction History, but to expose, in as detached as possible way, the ideas behind the actions made.

Les débats parlementaires autour du suffrage universel dans la construction de la représentation politique en Espagne et en Argentine: vers une analyse comparée (1860-1870)

This article aims to undertake a preliminary comparative review of the concepts of political representation developed by the Spanish and Argentinean liberalism during the construction of the parliamentary and constitutional regimes in the nineteenth century. The idea of the representative government, as a regulatory mechanism of political participation, is considered in terms of an analysis of the right to vote, of the processes to develop citizenship, and of political modernization. Legislation on the right to vote, born as the political right par excellence during the nineteenth century, gives an excellent guide to these political processes of major scope and depth that characterize the contemporary world. The comparison between the Spanish and Argentinean cases shows that exchanges, transfers of legislative models and cultural movements took place in the birth of the concept of political representation in both countries. This enables us to identify the differences of in each case.

Recolonization of mortars by endolithic organisms on the walls of San Roque church in Campeche (Mexico): A case of tertiary bioreceptivity

San Roque church (Campeche, Mexico) was built at the end of the 17th century with a micritic limestone and lime mortar in baroque style. In 2005 the church exhibited heavy biodeterioration associated with the development of extensive dark green phototrophic-based biofilms. Several cyanobacteria belonging to the order Chroococcales and lichenized fungi (Toninia nordlandica, Lobaria quercizans, Lecanora subcarnea, Cystocoleus ebeneus) were predominant in the dark biofilm samples, as revealed by DNA-based molecular techniques. In 2009, a cleaning and restoration intervention was adopted; however, after few months, microbial recolonization started to be noticeable on the painted church walls, representing an early phototrophic-based recolonization. According to molecular analysis, scanning electron microscopy observations and digital image analysis of cross sections, new phototrophic-based colonization, composed of cyanobacteria and bryophytes, developed mainly beneath the restored mortars. The intrinsic properties of the mortars, the tropical climate of Campeche and the absence of a biocide treatment in the restoration protocol influenced the recolonization of the church façades and enhanced the overall rate of deterioration in a short-term period.

Geological risk assessment of Amtoudi Agadir in southern Morocco: a key case for sustainable cultural heritage

Medieval fortified granaries known as “agadirs” are very common in southern Morocco, being catalogued as world cultural heritage by United Nations. These Berber buildings (made of stones and tree trunks) usually located on rocky promontories, constitute historical testimonials related to the origin of Morocco, and, as tourist attractions, have a positive impact on the local economy. The sustainability of these ancient monuments requires geological-risk evaluations of the massif stability under the agadir with the proposal of stabilization measures, and an architectonic analysis with appropriate maintenance of the structural elements. An interdisciplinary study including climate, seismicity, hydrology, geology, geomorphology, geotechnical surveys of the massif, and diagnosis of the degradation of structural elements have been performed on the Amtoudi Agadir, selected as a case study. The main findings from this study are that the prevalent rocks used for construction (coming from the underlying substratum) are good-quality arkosic sandstones; the SW cliffs under the agadir are unstable under water saturation; some masonry walls are too thin and lack interlocking stones and mortar; and failures in the beams (due to flexure, fracture, and exhaustion in the resistance due to insect attacks or plant roots) are common. The basic risk assessment of ancient buildings of cultural heritage and their geologic substratum are needed especially in undeveloped areas with limited capacity to implement durable conservation policies. Therefore, recommendations have been provided to ensure the stability and maintenance of this important archaeological site.

Workshops in “Construction of Structures I”: A new teaching methodology in the Building Engineering Degree

Both the current economic situation in the construction sector and the continuous normative changes in the building area imply the use of new methodologies to enhance students’ competences in the degree of Building Engineer. The aim of this paper is to present, analyse and discuss the development of constructive workshops as a new teaching methodology used in the subject of Construction of Structures I at the University of Alicante to complement the constructive and technical knowledge acquired by our students and to enhance their communicative and representation skills essential for their professional practice in the future. The used methodology is based on the development of three-dimensional construction details (in groups of 3 or 4 students) to be shown in two A1-pannels exposed in the corridors of the Polytechnic School. Thus, students’ work approaches constructive problems in a global way by discussing simultaneously with teachers and other groups about the most suitable solution on each case. This contribution has multiperspective results and improves criticism of students in different areas, encouraging new learning strategies and active participation. What is more, on-line information and web applications have been used to prepare and organize this kind of workshops, allowing students to use new technologies as a complementary learning methodology. In conclusion, the use of these new workshops in the Degree of Building Engineer stimulates an interactive class versus a traditional lecture where the participative groups´ attitude and the development of oral presentations dissolve the traditional boundaries regarding public communication skills of the students in the Degree.

Comparative analysis of constructive solutions for thermal insulation by using computer applications in building rehabilitation in Mediterranean climate. The Spanish case

The new Spanish legislation in Energy Saving, similar to European regulation, provides new technical requirements to adequate technical solutions used in integral rehabilitation of existing buildings. The aim of this paper is to present, analyze and discuss the main thermal insulation constructive solutions best suited to a Mediterranean climate, and conclude on their suitability under the legislation in Energy Saving. The proposed methodology is based on the most usual constructive solutions in integral rehabilitation of buildings by analyzing their outstanding design features, by studying its construction details and then by applying the software provided by the Spanish legislation of energy efficiency in buildings. The results of the study evaluate and classify several solutions for façade rehabilitation according to energy efficiency criteria and their suitability for this type of weather, verifying the necessity of using software applications in energy saving for the proper design of constructive solutions in building rehabilitation.