Individuazione di tecniche di gestione idrica-agronomica e di ricarica dell’acquifero freatico costiero per limitare la salinizzazione delle acque sotterranee e dei suoli.

Nel Comune di Ravenna, oltre 6.800 ettari di terreni agricoli sono a rischio salinizzazione, a causa dell’alta salinità delle acque sotterranee presenti all’interno dell’acquifero freatico costiero. L'area è interessata da subsidenza naturale, per compattazione dei sedimenti alluvionali e antropica, causata dall’estrazione di gas e dall’eccessivo sfruttamento delle acque sotterranee. Ne deriva che la maggior parte di questo territorio è sotto il livello medio del mare e l'agricoltura, così come ogni altra attività umana, è possibile grazie ad una fitta rete di canali di drenaggio che garantiscono il franco di coltivazione. L’agricoltura è una risorsa importante per la zona, ma a causa della scarsa disponibilità di acque dolci e per l’aumento dei processi di salinizzazione dei suoli, necessita di un cambiamento. Servono pratiche agricole sostenibili, con idonei requisiti irrigui, di drenaggio del suolo, di resistenza alla salinizzazione e di controllo del suolo. Dopo un’analisi generale sulle condizioni dell’acquifero, è stato monitorato un transetto di 10km rappresentativo della parte costiera di Ravenna. Infine, con l'obiettivo di comprendere l'interazione tra un canale d'irrigazione e le acque sotterranee, una piccola area agricola (12 ettari), è stata monitorata nel corso del 2011 utilizzando metodi idrologici, geochimici e geofisici. I risultati di questo lavoro mostrano una diffusa salinizzazione della falda freatica, ma anche la presenza di una lente d'acqua dolce spessa 5m, a 400m dalla linea di riva, con caratteristiche chimiche (hydrofacies) tipici di acque continentali e con dimensioni variabili stagionalmente. Questa bolla di acqua dolce si è originata esclusivamente dalle infiltrazioni dal canale d’irrigazione presente, in quanto, il contributo dell’irrigazione superficiale è stato nullo. Sfruttando la rete di canali di drenaggio già presente sarebbe possibile estendere questo processo d’infiltrazione da canale in altre porzioni dell’acquifero allo scopo di ricaricare l’acquifero stesso e limitare la salinizzazione dei suoli.

Assessing the effectiveness of ISO 3382 for evaluating the acoustical quality of italian historical theatres: the case study of the Bonci Theatre

The present study concerns the acoustical characterisation of Italian historical theatres. It moved from the ISO 3382 which provides the guidelines for the measurement of a well established set of room acoustic parameters inside performance spaces. Nevertheless, the peculiarity of Italian historical theatres needs a more specific approach. The Charter of Ferrara goes in this direction, aiming at qualifying the sound field in this kind of halls and the present work pursues the way forward. Trying to understand how the acoustical qualification should be done, the Bonci Theatre in Cesena has been taken as a case study. In September 2012 acoustical measurements were carried out in the theatre, recording monaural e binaural impulse responses at each seat in the hall. The values of the time criteria, energy criteria and psycho-acoustical and spatial criteria have been extracted according to ISO 3382. Statistics were performed and a 3D model of the theatre was realised and tuned. Statistical investigations were carried out on the whole set of measurement positions and on carefully chosen reduced subsets; it turned out that these subsets are representative only of the “average” acoustics of the hall. Normality tests were carried out to verify whether EDT, T30 and C80 could be described with some degree of reliability with a theoretical distribution. Different results, according to the varying assumptions underlying each test, were found. Finally, an attempt was made to correlate the numerical results emerged from the statistical analysis to the perceptual sphere. Looking for “acoustical equivalent areas”, relative difference limens were considered as threshold values. No rule of thumb emerged. Finally, the significance of the usual representation through mean values and standard deviation, which may be meaningful for normal distributed data, was investigated.

Outdoor bronze conservation: assessment of protective treatments by accelerated aging and of treatment removal procedures by laser cleaning

Outdoor bronzes exposed to the environment form naturally a layer called patina, which may be able to protect the metallic substrate. However, since the last century, with the appearance of acid rains, a strong change in the nature and properties of the copper based patinas occurred [1]. Studies and general observations have established that bronze corrosion patinas created by acid rain are not only disfiguring in terms of loss of detail and homogeneity, but are also unstable [2]. The unstable patina is partially leached away by rainwater. This leaching is represented by green streaking on bronze monuments [3]. Because of the instability of the patina, conservation techniques are usually required. On a bronze object exposed to the outdoor environment, there are different actions of the rainfall and other atmospheric agents as a function of the monument shape. In fact, we recognize sheltered and unsheltered areas as regards exposure to rainwater [4]. As a consequence of these different actions, two main patina types are formed on monuments exposed to the outdoor environment. These patinas have different electrochemical, morphological and compositional characteristics [1]. In the case of sheltered areas, the patina contains mainly copper products, stratified above a layer strongly enriched in insoluble Sn oxides, located at the interface with the uncorroded metal. Moreover, different colors of the patina result from the exposure geometry. The surface color may be pale green for unsheltered areas, and green and mat black for sheltered areas [4]. Thus, in real outdoor bronze monuments, the corrosion behavior is strongly influenced by the exposure geometry. This must be taken into account when designing conservation procedures, since the patina is in most cases the support on which corrosion inhibitors are applied. Presently, for protecting outdoor bronzes against atmospheric corrosion, inhibitors and protective treatments are used. BTA and its derivatives, which are the most common inhibitors used for copper and its alloy, were found to be toxic for the environment and human health [5, 6]. Moreover, it has been demonstrated that BTA is efficient when applied on bare copper but not as efficient when applied on bare bronze [7]. Thus it was necessary to find alternative compounds. Silane-based inhibitors (already successfully tested on copper and other metallic substrates [8]), were taken into consideration as a non-toxic, environmentally friendly alternative to BTA derivatives for bronze protection. The purpose of this thesis was based on the assessment of the efficiency of a selected compound, to protect the bronze against corrosion, which is the 3-mercapto-propyl-trimethoxy-silane (PropS-SH). It was selected thanks to the collaboration with the Corrosion Studies Centre “Aldo Daccò” at the Università di Ferrara. Since previous studies [9, 10, 11] demonstrated that the addition of nanoparticles to silane-based inhibitors leads to an increase of the protective efficiency, we also wanted to evaluate the influence of the addition of CeO2, La2O3, TiO2 nanoparticles on the protective efficiency of 3-mercapto-propyl-trimethoxy-silane, applied on pre-patinated bronze surfaces. This study is the first section of the thesis. Since restorers have to work on patinated bronzes and not on bare metal (except for contemporary art), it is important to be able to recreate the patina, under laboratory conditions, either in sheltered or unsheltered conditions to test the coating and to obtain reliable results. Therefore, at the University of Bologna, different devices have been designed to simulate the real outdoor conditions and to create a patina which is representative of real application conditions of inhibitor or protective treatments. In particular, accelerated ageing devices by wet & dry (simulating the action of stagnant rain in sheltered areas [12]) and by dropping (simulating the leaching action of the rain in unsheltered areas [1]) tests were used. In the present work, we used the dropping test as a method to produce pre-patinated bronze surfaces for the application of a candidate inhibitor as well as for evaluating its protective efficiency on aged bronze (unsheltered areas). In this thesis, gilded bronzes were also studied. When they are exposed to the outside environment, a corrosion phenomenon appears which is due to the electrochemical couple gold/copper where copper is the anode. In the presence of an electrolyte, this phenomenon results in the formation of corrosion products than will cause a blistering of the gold (or a break-up and loss of the film in some cases). Moreover, because of the diffusion of the copper salts to the surface, aggregates and a greenish film will be formed on the surface of the sample [13]. By coating gilded samples with PropS-SH and PropS-SH containing nano-particles and carrying out accelerated ageing by the dropping test, a discussion is possible on the effectiveness of this coating, either with nano-particles or not, against the corrosion process. This part is the section 2 of this thesis. Finally, a discussion about laser treatment aiming at the assessment of reversibility/re-applicability of the PropS-SH coating can be found in section 3 of this thesis. Because the protective layer loses its efficiency with time, it is necessary to find a way of removing the silane layer, before applying a new one on the “bare” patina. One request is to minimize the damages that a laser treatment would create on the patina. Therefore, different laser fluences (energy/surface) were applied on the sample surface during the treatment process in order to find the best range of fluence. In particular, we made a characterization of surfaces before and after removal of PropS-SH (applied on a naturally patinated surface, and subsequently aged by natural exposure) with laser methods. The laser removal treatment was done by the CNR Institute of Applied Physics “Nello Carrara” of Sesto Fiorentino in Florence. In all the three sections of the thesis, a range of non-destructive spectroscopic methods (Scanning Electron Microscopy with Energy Dispersive Spectroscopy (SEM-EDS), μ-Raman spectroscopy, X-Ray diffractometry (XRD)) were used for characterizing the corroded surfaces. AAS (Atomic Absorption Spectroscopy) was used to analyze the ageing solutions from the dropping test in sections 1 and 2.

Carbonate conical mounds of the eastern Anti-Atlas(Morocco) and their relationship with potential analogues on Mars

Longstanding debates concerning the origin of the Kess Kess Emsian carbonate mounds exposed at Hamar Laghdad Ridge (eastern Anti-Atlas, Morocco) centre around the processes that induced precipitation of carbonate mud and the preservation of steep morphologies. Although in the last years an origin related to hydrothermalism seemed to be more likely, to date the Kess Kess are still considered controversial vent deposits. This study combines in updated research review information from previous work and new detailed field observations coupled with new analytical results to define a consistent framework and some new insight of current knowledge about the origin of these mounds. We obtain a complete minero-petrographic and palaeobiological data set and a detailed geochemical characterization of the different lithologies and facies of the Hamar Laghdad stratigraphic succession, including mounds, and we compared the results with the data from Maïder Basin mounds (Anti-Atlas, Morocco). Our data support the hydrothermal model proposed for the genesis and development of the Kess Kess mounds. The mechanisms linked to the mounds formation and growth are discussed in the light of the new finding of fluid-sediment interaction within a scenario driven by late magmatic fluids circulation. Conical mounds and other fluids related morphologies were also reported from Crommelin crater area (Arabia Terra, Mars). These mounds consist in meter-sized conical buildups hosted in the Equatorial Layered Deposits (ELDs) deposed during a regional groundwater fluid upwelling. Geometries and geological conditions that might have controlled the development of such morphologies were discussed. According to our data the morphological and stratigraphical characteristics of Crommelin area mounds are most consistent with a formation by fluids advection. Then we compare terrestrial and Martian data and examine the geological settings of hydrothermal mound occurrences on Earth in order to describe potential target areas for hydrothermal structures on Mars.

Indagini molecolari per l'identificazione di batteri solfato riduttori in una laguna costiera.

Questo lavoro di tesi fa parte di un piano monitoraggio sulla Pialassa dei Piomboni coordinato dal Centro Interdipartimentale di Ricerca per le Scienze Ambientali (CIRSA, Università di Bologna) il cui scopo è stato quello di valutare la presenza di batteri solfato-riduttori (sulphatereducing bacteria SRB) in questa laguna costiera sia nell'acqua che nei sedimenti. Lo sviluppo di odori sgradevoli che avviene periodicamente nella Pialassa dei Piomboni ha fatto sorgere la necessità di verificare l'eventuale presenza di questi batteri. La Pialassa dei Piomboni è una laguna costiera a nord della citta di Ravenna. Si tratta di un'area in evidente stato di degrado a causa di pesanti interventi di antropizzazione e industrializzazione che stanno determinando forti problemi di inquinamento. La qualità dell’acqua di tale bacino risente infatti dei numerosi scarichi inquinati provenienti dal polo industriale e portuale, e di ingenti carichi trofici di origine agricola che entrano in laguna soprattutto attraverso l'idrovora di San Vitale. Questi input di nutrienti stimolano la proliferazione fitoplanctonica, la quale aumenta l'input di materiale organico sul fondo con conseguente riduzione della disponibilita di ossigeno e cambiamento nella struttura dei popolamenti bentonici. L'ipossia che ne consegue determina la diffusione di batteri in grado di degradare anaerobicamente la materia organica, quali ad esempio i solfato-riduttori. Questi batteri utilizzano il solfato come accettore finale di elettroni, che viene ridotto a solfuro di idrogeno. La determinare della presenza di batteri solfato-riduttori nei campioni di acqua e sedimento è stata svolta mediante utilizzo di una metodologia molecolare basata sull’estrazione dell’eDNA (environmental DNA) dalle matrici ambientali e la successiva amplificazione (PCR) di un tratto genico codificante l’enzima solfito reduttasi (dissimilatory sulfite reductase dsrAB), specifico di questi batteri.

Urban water demand model: the case study of Emilia Romagna (Italy)

Water is the driving force in nature. We use water for washing cars, doing laundry, cooking, taking a shower, but also to generate energy and electricity. Therefore water is a necessary product in our daily lives (USGS. Howard Perlman, 2013). The model that we created is based on the urban water demand computer model from the Pacific Institute (California). With this model we will forecast the future urban water use of Emilia Romagna up to the year of 2030. We will analyze the urban water demand in Emilia Romagna that includes the 9 provinces: Bologna, Ferrara, Forli-Cesena, Modena, Parma, Piacenza, Ravenna, Reggio Emilia and Rimini. The term urban water refers to the water used in cities and suburbs and in homes in the rural areas. This will include the residential, commercial, institutional and the industrial use. In this research, we will cover the water saving technologies that can help to save water for daily use. We will project what influence these technologies have to the urban water demand, and what it can mean for future urban water demands. The ongoing climate change can reduce the snowpack, and extreme floods or droughts in Italy. The changing climate and development patterns are expected to have a significant impact on water demand in the future. We will do this by conducting different scenario analyses, by combining different population projections, climate influence and water saving technologies. In addition, we will also conduct a sensitivity analyses. The several analyses will show us how future urban water demand is likely respond to changes in water conservation technologies, population, climate, water price and consumption. I hope the research can contribute to the insight of the reader’s thoughts and opinion.

Sintesi e caratterizzazione di prepolimeri per resine epossidiche derivanti da fonti rinnovabili e naturali attraverso un processo a basso impatto ambientale

La sostituzione di materie prime provenienti da risorse fossili con biomasse rinnovabili, utilizzando un processo a basso impatto ambientale, è una delle più importanti sfide della "Green Chemistry". Allo stesso tempo, la sintesi di resine epossidiche fornisce la chiave per la realizzazione di materiali ad alto valore aggiunto. Tuttavia, ad oggi, il 90% della produzione di resine epossidiche è basato sull'uso di bisfenolo A, che ha effetti di xenoestrogeno, ed epicloridrina, tossica e cancerogena. Su queste basi, è stata individuata una strategia sintetica per la sintesi di prepolimeri innovativi per resine epossidiche, che utilizza come substrato di reazione diidrossibenzeni di origine naturale ed evita l'uso di epicloridrina e altri reagenti tossici o pericolosi. La suddetta strategia sintetica è basata sulla sequenza: allilazione dei diidrossibenzeni - epossidazione dei doppi legami ottenuti. In questa procedura non vengono utilizzati drastiche condizioni di reazione e il solvente è acqua, con una catalisi di trasferimento di fase o, in aggiunte di acetonitrile, in un sistema bifasico. La resa complessiva dei due “step” dipende dalla posizione dei due ossidrili nei diidrossibenzeni. Il reagente che porta la resa massima è l’idrochinone (1,4 diidrossibenzene), che, come riportato in letteratura, permette la formazione di resine epossidiche con proprietà simili alle resine di epicloridrina e bisfenolo A. The substitution of raw materials from fossil fuels with renewable biomass using a low environmental impact process is one of the greatest challenges of the "Green Chemistry". At the same time, the synthesis of epoxy resins provides the key to the realization of high added value materials. However, 90% of the production of epoxy resins is based on the use of bisphenol A, a xenoestrogen, and epichlorohydrin, that is toxic and carcinogenic. On these bases, a synthetic strategy for the synthesis of innovative prepolymers of epoxy resins, that uses dihydroxybenzenes of natural origin as reaction substrates and avoids the use of epichlorohydrin and other toxic or dangerous reagents has been identified. The above synthetic strategy is based on the sequence: allylation of dihydroxybenzenes - epoxidation of the double bonds obtained. In this procedure, drastic reaction conditions are dismissed and the solvent used is water with a phase transfer catalysis or, in addition, acetonitrile in a biphasic system. The overall yield of the two steps depends on the position of the two hydroxyls of the dihydroxybenzenes. The reagent that leads to the highest yield is hydroquinone (1,4 dihydroxybenzene), which, as reported in literature, allows the formation of epoxy resins with similar properties to the resins from bisphenol A and epichlorohydrin.

Benvenuto Rambaldi da Imola: dantista in progress

Si procede ad un’analisi diacronica delle tre redazioni del commento dantesco di Benvenuto da Imola (dalle "recollectae" bolognesi e ferraresi al "Comentum"), considerando il testo benvenutiano quale «opera umana o lavoro in fieri», di cui rappresentare «drammaticamente la vita dialettica», così come il Contini iniziava a fare, negli anni ’30, con gli ʻscartafacciʼ ariosteschi. Secondo tale impostazione, si prende in esame la multiforme attitudine pedagogica di Benvenuto, di cui si indica, con riferimento ad altri commentatori coevi, danteschi e non, il contesto operativo. Nella seconda parte si ricostruisce, in senso sempre diacronico, la problematica oscillazione del commentatore tra tendenze avanguardistiche in direzione umanistico-petrarchesca e strenua apologia del testo dantesco. Nella terza ed ultima parte sono vagliate le originali idee benvenutiane riguardo alla lingua e alla poesia della Commedia, delle quali si ripercorre, attraverso l’esame delle varianti redazionali, la progressiva messa a fuoco. Obiettivo dell’elaborato, insomma, è restituire una descrizione organica e problematica della ricerca dantesca, "in progress", portata avanti da Benvenuto da Imola.

Stato ecologico di Punte Alberete e Valle Mandriole: popolamenti macrozoobentonici e chimica delle acque

Il presente studio si è proposto di fornire un contributo per la definizione dello stato ecologico delle zone umide d’acqua dolce ravennati (Punte Alberete, Valle Mandriole e uno stagno temporaneo creatosi nella limitrofa Pineta di San Vitale), attraverso lo studio della fauna macrobentonica presente nei sedimenti e nella vegetazione emergente. Sono stati prelevati campioni d’acqua con lo scopo di analizzare alcuni parametri chimico fisici, per relazionarli con i dati ecologici sulle comunità oggetto di studio. Inoltre è stato valutato il potenziale effetto sulle comunità macrozoobentoniche della attuale gestione di Valle Mandriole, che prevede il prosciugamento estivo della zona meridionale al fine di consentire operazioni di sflacio della vegetazione. Per valutare questo tipo di impatto è stato applicato un disegno di campionamento di tipo Beyond-BACI. Sono stati definiti quattro siti di controllo ed un sito potenzialmente impattato. Sono stati definiti due punti di campionamento su ciascun sito e sono stati campionati in totale quattro volte ciascuno, due volte prima del periodo estivo, corrispondente alla messa in secca del sito impattato, e due volte in autunno. I dati raccolti sul benthos e sulle acque sono poi stati analizzati attraverso l’analisi statistica multivariata PERMANOVA. I risultati dei test statistici non hanno rilevato nessun tipo di impatto associabile alla pratica di gestione attuata a Valle Mandriole, mentre l’analisi delle comunità macrozoobentoniche ha evidenziato, attraverso confronti temporali con dati storici e con altri studi, una situazione di degrado dal punto di vista delle stato ecologico di Punte Alberete e Valle Mandriole, molto probabilmente associabile all’abbondante presenza del gambero della Louisiana. La condizione di stato ecologico non soddisfacente può oltretutto essere imputabile anche alla qualità ecologica scarsa dei corsi d’acqua deputati al ricarico delle zone umide considerate. Lo studio ha inoltre sottolineato l’importanza dal punto di vista conservazionistico dello stagno in Pineta San Vitale.

Seismic sequences analysis for estimation of earthquake source parameters: corner frequency, stress drop, and seismic moment observations

The present study has been carried out with the following objectives: i) To investigate the attributes of source parameters of local and regional earthquakes; ii) To estimate, as accurately as possible, M0, fc, Δσ and their standard errors to infer their relationship with source size; iii) To quantify high-frequency earthquake ground motion and to study the source scaling. This work is based on observational data of micro, small and moderate -earthquakes for three selected seismic sequences, namely Parkfield (CA, USA), Maule (Chile) and Ferrara (Italy). For the Parkfield seismic sequence (CA), a data set of 757 (42 clusters) repeating micro-earthquakes (0 ≤ MW ≤ 2), collected using borehole High Resolution Seismic Network (HRSN), have been analyzed and interpreted. We used the coda methodology to compute spectral ratios to obtain accurate values of fc , Δσ, and M0 for three target clusters (San Francisco, Los Angeles, and Hawaii) of our data. We also performed a general regression on peak ground velocities to obtain reliable seismic spectra of all earthquakes. For the Maule seismic sequence, a data set of 172 aftershocks of the 2010 MW 8.8 earthquake (3.7 ≤ MW ≤ 6.2), recorded by more than 100 temporary broadband stations, have been analyzed and interpreted to quantify high-frequency earthquake ground motion in this subduction zone. We completely calibrated the excitation and attenuation of the ground motion in Central Chile. For the Ferrara sequence, we calculated moment tensor solutions for 20 events from MW 5.63 (the largest main event occurred on May 20 2012), down to MW 3.2 by a 1-D velocity model for the crust beneath the Pianura Padana, using all the geophysical and geological information available for the area. The PADANIA model allowed a numerical study on the characteristics of the ground motion in the thick sediments of the flood plain.

Ground penetrating radar early-time technique for soil electromagnetic parameters estimation

In recent years, thanks to the technological advances, electromagnetic methods for non-invasive shallow subsurface characterization have been increasingly used in many areas of environmental and geoscience applications. Among all the geophysical electromagnetic methods, the Ground Penetrating Radar (GPR) has received unprecedented attention over the last few decades due to its capability to obtain, spatially and temporally, high-resolution electromagnetic parameter information thanks to its versatility, its handling, its non-invasive nature, its high resolving power, and its fast implementation. The main focus of this thesis is to perform a dielectric site characterization in an efficient and accurate way studying in-depth a physical phenomenon behind a recent developed GPR approach, the so-called early-time technique, which infers the electrical properties of the soil in the proximity of the antennas. In particular, the early-time approach is based on the amplitude analysis of the early-time portion of the GPR waveform using a fixed-offset ground-coupled antenna configuration where the separation between the transmitting and receiving antenna is on the order of the dominant pulse-wavelength. Amplitude information can be extracted from the early-time signal through complex trace analysis, computing the instantaneous-amplitude attributes over a selected time-duration of the early-time signal. Basically, if the acquired GPR signals are considered to represent the real part of a complex trace, and the imaginary part is the quadrature component obtained by applying a Hilbert transform to the GPR trace, the amplitude envelope is the absolute value of the resulting complex trace (also known as the instantaneous-amplitude). Analysing laboratory information, numerical simulations and natural field conditions, and summarising the overall results embodied in this thesis, it is possible to suggest the early-time GPR technique as an effective method to estimate physical properties of the soil in a fast and non-invasive way.

Fiber-reinforced ceramics for thermostructural applications, produced by polymer impregnation pyrolysis

Several CFCC (Continuous Fiber Composite Ceramics) production processes were tested, concluding that PIP (Polymer Impregnation, or Infiltration, Pyrolysis) and CBC (Chemically Bonded Ceramics) based procedures have interesting potential applications in the construction and transportation fields, thanks to low costs to get potentially useful thermomechanical performances. Among the different processes considered during the Doctorate (from the synthesis of new preceramic polymers, to the PIP production of SiC / SiC composites) the more promising results came from the PIP process with poly-siloxanes on basalt fabrics preforms. Low processing time and costs, together with fairly good thermomechanical properties were demonstrated, even after only one or two PIP steps in nitrogen flow. In alternative, pyrolysis in vacuum was also tested, a procedure still not discussed in literature, but which could originate an interesting reduction of production costs, with only a moderate detrimental effect on the mechanical properties. The resulting CFCC is a basalt / SiCO composite that can be applied for continuous operation up to 600°C, also in oxidant environment, as TG and XRD demonstrated. The failure upon loading is generally pseudo-plastic, being interlaminar delamination the most probable rupture mechanism. . The strength depends on several different factors (microstructure, polymer curing and subsequent ceramic phase evolution, fiber pull-out, fiber strength, fiber percentage) and can only be optimized empirically. In order to be open minded in selecting the best technology, also CBC (Chemically Bonded Ceramics) matrixes were considered during this Doctorate, making some preliminary investigations on fire-resistant phosphate cements. Our results on a commercial product evidenced some interesting thermomechanical capabilities, even after thermal treatments. However the experiments showed also phase change and possible cracking and deformations even on slow drying (at 130°C) and easy rehydration upon exposure to environmental humidity.

Valutazione della mobilita' di contaminanti inorganici tramite test di cessione su matrici ambientali contaminate

La caratterizzazione di sedimenti contaminati è un problema complesso, in questo lavoro ci si è occupati di individuare una metodologia di caratterizzazione che tenesse conto sia delle caratteristiche della contaminazione, con analisi volte a determinare il contenuto totale di contaminanti, sia della mobilità degli inquinanti stessi. Una adeguata strategia di caratterizzazione può essere applicata per la valutazione di trattamenti di bonifica, a questo scopo si è valutato il trattamento di soil washing, andando ad indagare le caratteristiche dei sedimenti dragati e del materiale in uscita dal processo, sabbie e frazione fine, andando inoltre a confrontare le caratteristiche della sabbia in uscita con quelle delle sabbie comunemente usate per diverse applicazioni. Si è ritenuto necessario indagare la compatibilità dal punto di vista chimico, granulometrico e morfologico. Per indagare la mobilità si è scelto di applicare i test di cessione definiti sia a livello internazionale che italiano (UNI) e quindi si sono sviluppate le tecnologie necessarie alla effettuazione di test di cessione in modo efficace, automatizzando la gestione del test a pHstat UNI CEN 14997. Questo si è reso necessario a causa della difficoltà di gestire il test manualmente, per via delle tempistiche difficilmente attuabili da parte di un operatore. Le condizioni redox influenzano la mobilità degli inquinanti, in particolare l’invecchiamento all’aria di sedimenti anossici provoca variazioni sensibili nello stato d’ossidazione di alcune componenti, incrementandone la mobilità, si tratta quindi di un aspetto da considerare quando si individuano le adeguate condizioni di stoccaggio-smaltimento, si è eseguita a questo scopo una campagna sperimentale.

Sostituzione dell'epicloridrina con derivati del glicerolo nella preparazione di prepolimeri per resine epossidiche bio-based.

La recente e innovativa filosofia della green chemistry che si sta diffondendo nell’industria chimica e l’incombente esaurimento di risorse fossili, stanno indirizzando la ricerca del settore chimico verso la realizzazione di processi sempre più sostenibili. Tra i processi che necessitano maggiormente di questi cambiamenti, vi è quello della produzione di resine epossidiche che per il 90% è costituito attualmente da resine a base di bisfenolo-A, neuro tossico e pericoloso per la riproduzione umana, ed epicloridrina cancerogena; entrambi ottenuti da risorse fossili. Per tali motivi, in questo elaborato si è cercato di sviluppare un processo di sintesi il più possibile “green”, per l’ottenimento di una molecola derivante da risorse rinnovabili, da sostituire all’epicloridrina nella sintesi di prepolimeri per resine epossidiche bio-based. Lo sviluppo del lavoro è avvenuto tramite lo studio dei reagenti, solventi e parametri operativi, ottenendo il glicidil tosilato a partire da glicerolo e tosil cloruro attraverso una reazione in sistema bifasico, semplice dal punto di vista pratico e senza l’utilizzo di composti tossici. Il glicidil tosilato è meno problematico in quanto meno volatile rispetto all’epicloridrina, ed inoltre le prove di reazione con il bisfenolo-A hanno portato all’ottenimento del prepolimero con rese maggiori rispetto a quelle ottenute nelle stesse condizioni con epicloridrina.

Late Quaternary geological evolution of the Montenegro and Northern Albania continental margins

The object of this work has been the analysis of natural processes controlling the geological evolution of the Montenegro and Northern Albania Continental Margin (MACM) during the Late Quaternary. These include the modern sediment dispersal system and oceanographic regime, the building and shaping of the shelf margin at the scale of 100 kyr and relative to the most recent transition between glacial and interglacial periods. The analysis of the new data shows that the MACM is a shelf-slope system formed by a suite of physiographic elements, including: an inner and an outer continental shelf, separated by two tectonically-controlled morphological highs; a lobated drowned mid-shelf paleodelta, formed during the last sea level fall and low stand; an upper continental slope, affected by gravity-driven instability and a system of extensional faults with surficial displacement, featuring an orientation coherent with the regional tectonics. The stratigraphic study of the MACM shows a clear correspondence between the Late Pleistocene/Holocene mud-wedge and the low reflectivity sectors of the inner shelf. Conversely, most of the outer shelf and part of the continental slope expose deposits from the last sea level low stand, featuring a general sediment starving condition or the presence of a thin postglacial sediments cover. The MACM shows uplift in correspondence of the Kotor and Bar ridges, and subsidence in the outer shelf and upper slope sectors. In fact, seaward of these tectonic ridges, the sparker seismic profile show the presence of four well-defined seismo-stratigraphic sequences, interpreted as forced regression deposits, formed during the last four main glacial phases. In this way, the MACM records the 100 kyr scale sea level fluctuations on its seismo-stratigraphic architecture over the last 350 kyr. Over such time range, through the identification of the paleoshoreline deposits, we estimated an average subsidence rate of about 1.2 mm/yr.