Processamento e caracterização de compósito fibra de sisal/resina epóxi via RTM

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Síntese e caracterização do compósito SnO2/TiO2 nanoestruturado

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Oxidação de lisozima por haloaminas: caracterização química e efeitos biológicos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização estrutural do Lineamento de Piúma e sua influência na porção norte da Bacia de Campos

The detailed study of the Brazilian continental margin basins became possible with the advancement of geophysical tools, with emphasis on seismic reflection. Characterizing the structural and stratigraphic elements of Brazil’s marginal basins they realized that there was a relationship with structures present on the adjacent continental basement. So many works began to be made to understand this relationship and know the major factors that influenced the evolution of the continental margin. The study area of this work includes the northern portion of the Campos Basin and the continental outcropping adjacent areas, which corresponds to the northern of Rio de Janeiro state and the southern of Espirito Santo state. This area stands an important structural feature of NW-SE direction with a projection to the Campos Basin called Lineamento de Piúma. The outcropping basement rocks belongs to the Ribeira Belt which was bonded to other mobile bands forming the continent Western Gondwana during the Brasiliano Cycle, which later fragmented giving rise to the Atlantic Ocean. The opening of the ocean results on the formation of the marginal basins of Brazil. These basins have continental, transitional and marine facies. On Campos Basin the continental phase resulted on the formation of horsts and grabens bounded by synthetic and antithetic faults. Continuing rifting formed the saline lakes that deposited siliciclastic and carbonate sediments. The transitional phase resulted on thick packages consist of evaporites (halite and anhydrite) that was deposited in lagoon environment, tectonically quiet arid and semi-arid. The marine phase it deposited siliciclastic and carbonate in the Campos Basin resulting in shales, marls, limestones, ritmito, turbidites, sandstones and others. The objective of this study is to investigate the possible continuation... (Complete abstract click electronic access below)

Caracterização geológica e estrutural da porção centro-norte do greenstone belt de Faina, Faina-GO

The area where the study was conducted is located in the central-western state of Goias. It geologically inserts the northern portion of the Greenstone Belt of Faina which belongs to the Archean terranes that fits in Brasília Fold Belt and Tocantins Structural Province. This region is known for its greenstone lode gold potential and it was heavily exploited by pioneers and prospectors, leaving many records for where they have been through. Preliminary work done by Orinoco Brasil Mineração in their required areas at the region showed that the environment is promising for gold mineralization and that the ore is controlled by structures. Therefore the objectives of this work were the geological and structural mapping in semi detail scale to improve geological, stratigraphic and structural controls present attributing possible ore understanding. With the development of the work there were recognized on the desktop three structural domains separated by a thrust fault. For each domain were discriminated the geological units ranging in gneisses, quartzites formed from coarse sediments arcoseanos, and schists. By mapping structures there were found five deformation phases, Dn-2, Dn-1, the Dn event that generated the main foliation (Sn) in high representation and two post-stages Dn with brittle late manifestations. The detail mapping of the Rattlesnake Gallery showed that the mineralized quartz vein is consistent with axial-plane foliation Sn-2 belonging to the oldest deformation Dn-2 phase and that the high grade is distributed in the hinge region folds of the same phase

Caracterização estrutural da porção central da Bacia de Santos e seu embasamento continental adjacente, através de interpretação de imagens de satélites e geofísicas

The Santos Basin is located in the Brazilian continental margin and includes the coast of Santa Catarina, Paraná, São Paulo and Rio de Janeiro states. Its northern limit is the Campos Basin through the High of Cabo Frio and the southern one with the Pelotas Basin through the Platform of Florianópolis, totaling an area of approximately 350,000 square kilometers in a water depth of 3,000 m. The Paranapanema Lineament has WNW / ESE direction, and extends from the area filled by the Paraná Basin, on the border between the states of Sao Paulo and Parana, lasting up to near the ocean floor along with the fracture zone of Rio de Janeiro. The Capricorn Lineament is a feature inherited from the separation between the continents of Africa and South America, and is the main structural feature NW / SE of the Santos Basin center-south region. These two structures together with other ones with continental origin may be associated with structural features in the sediments from the Santos Basin. This work aims to characterize the structures operating in the central portion of the Santos Basin based on subsurface data in the offshore area (2D seismic) together with data from the surface of the continental basement in a way to correlate the Santos Basin structures with the continental regional traits. This data interpolation showed that the structural features of the continent operates on the submerged zone, the seismic sections show these structural trends for the Paranapanema Lineament / Fracture Zone of Rio de Janeiro, Capricorn Lineament and two fault zones that exhibit structures typical of a transfer zone

Obtenção e caracterização de compósitos via RTM com alta fração de fibras de carbono processados à temperatura ambiente

After confirming the high specific mechanical properties of composite materials by scientific studies conducted over the last decades, one of the challenges of this new class of materials is the ability to achieve mass production at a more affordable cost, which has become indispensable. The Resin Transfer Molding (RTM) is an excellent method for manufacturing composite materials. Despite being a process widely used by international companies in the production of high performance structural composites, only a short time the national aviation industry has shown interest in implementing this type of processing to more complex structures and greater structural responsibility. In aeronautical projects, the reproducibility and the relative low cost of this process, several studies have been performed in Brazil for learning and perfecting this technique. This process is suitable for producing polymer components both simple as complex geometry, and allows to achieve consistent thickness, with high quality finish and without limiting range. Polymeric composite components for the high mechanical stress applications such as aircraft structures, satellites, etc., require a strict control of volume fractions of the composite constituents, beyond the knowledge of their mechanical and thermal properties. Therefore, in this experimental work degree study on the mechanical, thermal and of porosity composites processed by RTM processed characterization was performed. This characterization was performed targeting a possible aerospace application of this composite material. For the production of composites, process equipment (RTM RTM injector Radius 2100cc) was used. The processed carbono/epoxy composites were characterized via flexure tests mechanically and thermally analysis via DMA, DSC and TGA. To determine the volume fraction of fibers, the composite samples were analyzed via matrix digestion (ASTM D3171) ... (Complete abstract click electronic access below)

Caracterização físico-mecânica de elementos estruturais roliços perfilados de Amaru

The study of physical and mechanical properties of wood is essential for its structural use and it is of great importance to the construction industry. Thus, this study aimed to determine the physical and mechanical properties of the wood Amaru - a hybrid of Eucalyptus, developed by Plantar Projects and Forest Products Ltda. In order to determine the properties of Amaru, round samples were used, which were provided to the Laboratory of Wood and Wooden Structures of the School of Engineering of São Carlos, University of São Paulo - LaMEM / EESC / USP. For the characterization of the physical properties, the apparent specific gravity and moisture content of the samples were determined. To the mechanical characterization, the following properties were evaluated: strength and stiffness in compression, strength and stiffness in bending, shear and tension. The procedures of the tests performed in this study were done according to the recommendations of the Brazilian Wood Standard ABNT NBR 7190:1997. The specimen used were confectioned in actual dimensions, according to as those used in the construction system proposed by Plantar. The results obtained from the tests performed showed that the mechanical properties approached the values proposed by the Wood Standard NBR 7190. The visual grading was important to provide a primary idea about the failure modes to be obtained from the tests performed. The bending test showed the modulus of elasticity (MOE) and Modulus of Rupture (MOR), which resulted in 15822 MPa and 101,7 MPa, respectively. The compression test resulted in values Ec0,m and fc0, 15698 MPa and 50,7 MPa. The tensile strength (ft0) of this hybrid was calculated and its value obtained was 60,8 MPa. The shear strength (fv0) was 8,2 MPa. The results obtained from the tests are the basis for engineers and architects to design structures using wood species Amaru

Desenvolvimento e caracterização de sistemas nanoestruturados para administração cutânea de metotrexato

A psoríase é uma doença inflamatória de pele e das articulações, e por acometer um órgão visível como a pele, resulta em transtornos psicológicos relacionados à auto-estima do paciente. Dentre os fármacos empregados no tratamento, destaca-se o metotrexato para uso sistêmico que, embora eficiente, possui a desvantagem de causar efeitos colaterais tóxicos como a hepatotoxicidade e a mielotoxicidade. Para minimizar tais efeitos e aumentar a eficácia do fármaco, o trabalho teve por objetivo desenvolver e caracterizar sistemas nanoestruturados para administração cutânea do metotrexato. Para realizar esse estudo, inicialmente foram preparadas diferentes formulações constituídas por silicone fluido de copolímero glicol (DC® 193), poliéter funcional siloxano (DC® 5329) e água destilada. O metotrexato foi incorporado numa concentração de 1,25% (p/v), com auxílio de solução de hidróxido de sódio 1M, sendo ajustado o pH final da formulação para 7,0 com ácido clorídrico 0,1M. Foram selecionadas algumas regiões do diagrama para serem submetidas a testes de estabilidade, empregando o teste de centrifugação, determinação do pH, condutividade iônica, índice de refração e avaliação das características organolépticas. Foi realizada a análise reológica empregando reômetro, modelo RS-1 (HaakeRheostress). As estruturas das formulações foram analisadas por microscopia de luz polarizada. As amostras com maior concentração de tensoativo apresentaram aspecto transparente, sendo submetidas à análise com microscópio de luz polarizada, onde evidenciou-se estruturas conhecidas como “cruzes de malta”, indicativas de fase lamelar. Foram selecionadas 3 formulações com concentração de 40% de tensoativo, variando-se as proporções de água e óleo, nas quais foram incorporadas o metotrexato... (Resumo completo, clicar acesso eletrônico abaixo)

Caracterização estrutural da Liga Al-1% Si

The aim of this study is to characterize the macrostructure and microstructure of Al - 1%Si alloy obtained in sand and metallic molds. Aluminium has good mechanical properties, but adding silicon, even in small quantities, can change the microstructure and improves mechanical behavior. Workpieces were castings in metallic and sand molds and one can see a difference in their cooling curve, macroscopic and microscopic structures. The sand mold casting has lower cooling rate and so its grains are larger. Due to the lower concentration of grain boundary, the hardness is lower compared to that found in metallic molds, which has smaller grains and a higher hardness. Therefore, it can be concluded that the cooling rate and alloying elements affect the final microstructure of the workpiece

Síntese e caracterização de hidrogéis de amido retrogradado e goma gelana utilizados como matriz em sistemas de liberação cólon específica de fármacos

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Síntese, caracterização e estudo do comportamento térmico dos oxanatos de lantanídeos(III) e de ítrio(III), no estado sólido

Pós-graduação em Química - IQ

Expressão, purificação e caracterização estrutural de proteínas codificadas por dois fitovírus

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Caracterização magnetométrica de Sill de diabásio na região de Limeira - SP

Pós-graduação em Geologia Regional - IGCE

Caracterização química e estudo térmico de lodos provenientes da estação de tratamento de esgotos de Ribeirão Preto, SP, Brasil

Pós-graduação em Química - IQ