Mobile systems for monitoring Parkinson's disease

A challenge for the clinical management of Parkinson's disease (PD) is the large within- and between-patient variability in symptom profiles as well as the emergence of motor complications which represent a significant source of disability in patients. This thesis deals with the development and evaluation of methods and systems for supporting the management of PD by using repeated measures, consisting of subjective assessments of symptoms and objective assessments of motor function through fine motor tests (spirography and tapping), collected by means of a telemetry touch screen device. One aim of the thesis was to develop methods for objective quantification and analysis of the severity of motor impairments being represented in spiral drawings and tapping results. This was accomplished by first quantifying the digitized movement data with time series analysis and then using them in data-driven modelling for automating the process of assessment of symptom severity. The objective measures were then analysed with respect to subjective assessments of motor conditions. Another aim was to develop a method for providing comparable information content as clinical rating scales by combining subjective and objective measures into composite scores, using time series analysis and data-driven methods. The scores represent six symptom dimensions and an overall test score for reflecting the global health condition of the patient. In addition, the thesis presents the development of a web-based system for providing a visual representation of symptoms over time allowing clinicians to remotely monitor the symptom profiles of their patients. The quality of the methods was assessed by reporting different metrics of validity, reliability and sensitivity to treatment interventions and natural PD progression over time. Results from two studies demonstrated that the methods developed for the fine motor tests had good metrics indicating that they are appropriate to quantitatively and objectively assess the severity of motor impairments of PD patients. The fine motor tests captured different symptoms; spiral drawing impairment and tapping accuracy related to dyskinesias (involuntary movements) whereas tapping speed related to bradykinesia (slowness of movements). A longitudinal data analysis indicated that the six symptom dimensions and the overall test score contained important elements of information of the clinical scales and can be used to measure effects of PD treatment interventions and disease progression. A usability evaluation of the web-based system showed that the information presented in the system was comparable to qualitative clinical observations and the system was recognized as a tool that will assist in the management of patients.

Conception of wheeled mobile robots with reconfigurable control using integrate prototyping

With the fast innovation of the hardware and software technologies using rapid prototyping devices, with application in the robotics and automation, more and more it becomes necessary the development of applications based on methodologies that facilitate future modifications, updates and enhancements in the original projected system. This paper presents a conception of mobile robots using rapid prototyping, distributing the several control actions in growing levels of complexity and using resources of reconfigurable computing proposal oriented to embed systems implementation. Software and the hardware are structuralized in independents blocks, with connection through common bus. The study and applications of new structures control that permits good performance in relation to the parameter variations. This kind of controller can be tested on different platform representing the wheeled mobile robots using reprogrammable logic components (FPGA). © 2006 IEEE.

Ubiquity of virtual disguisers and potential impact on ethical behavior

The widespread availability of wirelessly connected portable computers, smartphones and other mobile devices, and the pervasive presence of computer services in our everyday environment, has brought the prediction of Mark Weiser of future ubiquitous computer systems closer to reality. Some of these - ever-present, anywhere, anytime - ubiquitous computer services mean easier and pleasant lifestyles for many people, but the generalized availability of some classes of these softwares and computer services, known as virtual disguisers and Virtual Robots, can pose new ethical problems in a world of explosive growth of social networking sites. The objective of the present article is to investigate some of these problems, from an interdisciplinary philosophical perspective. Special emphasis shall be given to the potential impact on human conduct caused by disguisers and Virtual Robots. © 2011 IEEE.

The advance of cloud computing

The “Implementation of the National Data Centre” project, Augusto Espín, Deputy Minister of Telecommunications and Information Society, Ecuador .-- Cloud computing and public policy in Brazil, Rafael Henrique Rodrigues Moreira, Ministry of Science, Technology and Innovation, Brazil .-- “The cloud is being taken up more quickly in Latin America than in the rest of the world”, interview to Lalo Steinmann, Microsoft .-- The impact of education and research networks on the development of cloud computing Eduardo Vera, University of Chile .-- “The cloud helps to narrow divides by providing access to technology resources that used to be unaffordable”, interview to Luis Urzúa, Movistar Chile .-- “Cloud computing will be a strategic sector of the economy in the coming years”, interview to Jean-Bernard Gramunt, France’s digital strategy .-- “If take-up in Latin America is as strong as predicted, it will be a good opportunity to create and export technology”, interview to Flavio Junqueira, Yahoo! Labs.

Tecnologie ad agenti e sistemi embedded

Information technology (IT) is on the verge of another revolution. Driven by the increasing capabilities and ever declining costs of computing and communications devices, IT is being embedded into a growing range of physical devices linked together through networks and will become ever more pervasive as the component technologies become smaller, faster, and cheaper. [..] These networked systems of embedded computers, referred to as EmNets throughout this report, have the potential to change radically the way people interact with their environment by linking together a range of devices and sensors that will allow information to be collected, shared, and processed in unprecedented ways.[..] The use of EmNets throughout society could well dwarf previous milestones in the information revolution.[..] IT will eventually become \textbf{an invisible component of almost everything} in everyone`s surroundings. Con il ridursi dei costi e l'aumentare della capacità di computazione dei componenti elettronici sono proliferate piattaforme che permettono al bambino come all'ingegnere di sviluppare un'idea che trasversalmente taglia il mondo reale e quello virtuale. Una collisione tra due mondi che fino a poco tempo fa era consentita esclusivamente a professionisti. Oggetti che possono acquisire o estendere funzionalità, che ci permettono di estendere la nostra percezione del mondo e di rivalutarne i suoi limiti. Oggetti connessi alla 'rete delle reti' che condividono ed elaborano dati per un nuovo utilizzo delle informazioni. Con questa tesi si vuole andare ad esplorare l'applicazione degli agenti software alle nuove piattaforme dei sistemi embedded e dell'Internet of Things, tecnologie abbastanza mature eppure non ancora esplorate a fondo. Ha senso modellare un sistema embedded con gli agenti?

Middleware principles and design for the integration of ubiquitos mobile services

Nowadays, in Ubiquitous computing scenarios users more and more require to exploit online contents and services by means of any device at hand, no matter their physical location, and by personalizing and tailoring content and service access to their own requirements. The coordinated provisioning of content tailored to user context and preferences, and the support for mobile multimodal and multichannel interactions are of paramount importance in providing users with a truly effective Ubiquitous support. However, so far the intrinsic heterogeneity and the lack of an integrated approach led to several either too vertical, or practically unusable proposals, thus resulting in poor and non-versatile support platforms for Ubiquitous computing. This work investigates and promotes design principles to help cope with these ever-changing and inherently dynamic scenarios. By following the outlined principles, we have designed and implemented a middleware support platform to support the provisioning of Ubiquitous mobile services and contents. To prove the viability of our approach, we have realized and stressed on top of our support platform a number of different, extremely complex and heterogeneous content and service provisioning scenarios. The encouraging results obtained are pushing our research work further, in order to provide a dynamic platform that is able to not only dynamically support novel Ubiquitous applicative scenarios by tailoring extremely diverse services and contents to heterogeneous user needs, but is also able to reconfigure and adapt itself in order to provide a truly optimized and tailored support for Ubiquitous service provisioning.

Uniquitous internet middleware: architecture design and prototype evaluation

Technology advances in recent years have dramatically changed the way users exploit contents and services available on the Internet, by enforcing pervasive and mobile computing scenarios and enabling access to networked resources almost from everywhere, at anytime, and independently of the device in use. In addition, people increasingly require to customize their experience, by exploiting specific device capabilities and limitations, inherent features of the communication channel in use, and interaction paradigms that significantly differ from the traditional request/response one. So-called Ubiquitous Internet scenario calls for solutions that address many different challenges, such as device mobility, session management, content adaptation, context-awareness and the provisioning of multimodal interfaces. Moreover, new service opportunities demand simple and effective ways to integrate existing resources into new and value added applications, that can also undergo run-time modifications, according to ever-changing execution conditions. Despite service-oriented architectural models are gaining momentum to tame the increasing complexity of composing and orchestrating distributed and heterogeneous functionalities, existing solutions generally lack a unified approach and only provide support for specific Ubiquitous Internet aspects. Moreover, they usually target rather static scenarios and scarcely support the dynamic nature of pervasive access to Internet resources, that can make existing compositions soon become obsolete or inadequate, hence in need of reconfiguration. This thesis proposes a novel middleware approach to comprehensively deal with Ubiquitous Internet facets and assist in establishing innovative application scenarios. We claim that a truly viable ubiquity support infrastructure must neatly decouple distributed resources to integrate and push any kind of content-related logic outside its core layers, by keeping only management and coordination responsibilities. Furthermore, we promote an innovative, open, and dynamic resource composition model that allows to easily describe and enforce complex scenario requirements, and to suitably react to changes in the execution conditions.

Mobile TuCSoN: theoretical and technological requirements for TuCSoN's porting over Android mobile devices

Communication and coordination are two key-aspects in open distributed agent system, being both responsible for the system’s behaviour integrity. An infrastructure capable to handling these issues, like TuCSoN, should to be able to exploit modern technologies and tools provided by fast software engineering contexts. Thesis aims to demonstrate TuCSoN infrastructure’s abilities to cope new possibilities, hardware and software, offered by mobile technology. The scenarios are going to configure, are related to the distributed nature of multi-agent systems where an agent should be located and runned just on a mobile device. We deal new mobile technology frontiers concerned with smartphones using Android operating system by Google. Analysis and deployment of a distributed agent-based system so described go first to impact with quality and quantity considerations about available resources. Engineering issue at the base of our research is to use TuCSoN against to reduced memory and computing capability of a smartphone, without the loss of functionality, efficiency and integrity for the infrastructure. Thesis work is organized on two fronts simultaneously: the former is the rationalization process of the available hardware and software resources, the latter, totally orthogonal, is the adaptation and optimization process about TuCSoN architecture for an ad-hoc client side release.

Sistemi riconfigurabili a basso consumo per applicazioni di monitoraggio distribuito

The term Ambient Intelligence (AmI) refers to a vision on the future of the information society where smart, electronic environment are sensitive and responsive to the presence of people and their activities (Context awareness). In an ambient intelligence world, devices work in concert to support people in carrying out their everyday life activities, tasks and rituals in an easy, natural way using information and intelligence that is hidden in the network connecting these devices. This promotes the creation of pervasive environments improving the quality of life of the occupants and enhancing the human experience. AmI stems from the convergence of three key technologies: ubiquitous computing, ubiquitous communication and natural interfaces. Ambient intelligent systems are heterogeneous and require an excellent cooperation between several hardware/software technologies and disciplines, including signal processing, networking and protocols, embedded systems, information management, and distributed algorithms. Since a large amount of fixed and mobile sensors embedded is deployed into the environment, the Wireless Sensor Networks is one of the most relevant enabling technologies for AmI. WSN are complex systems made up of a number of sensor nodes which can be deployed in a target area to sense physical phenomena and communicate with other nodes and base stations. These simple devices typically embed a low power computational unit (microcontrollers, FPGAs etc.), a wireless communication unit, one or more sensors and a some form of energy supply (either batteries or energy scavenger modules). WNS promises of revolutionizing the interactions between the real physical worlds and human beings. Low-cost, low-computational power, low energy consumption and small size are characteristics that must be taken into consideration when designing and dealing with WSNs. To fully exploit the potential of distributed sensing approaches, a set of challengesmust be addressed. Sensor nodes are inherently resource-constrained systems with very low power consumption and small size requirements which enables than to reduce the interference on the physical phenomena sensed and to allow easy and low-cost deployment. They have limited processing speed,storage capacity and communication bandwidth that must be efficiently used to increase the degree of local ”understanding” of the observed phenomena. A particular case of sensor nodes are video sensors. This topic holds strong interest for a wide range of contexts such as military, security, robotics and most recently consumer applications. Vision sensors are extremely effective for medium to long-range sensing because vision provides rich information to human operators. However, image sensors generate a huge amount of data, whichmust be heavily processed before it is transmitted due to the scarce bandwidth capability of radio interfaces. In particular, in video-surveillance, it has been shown that source-side compression is mandatory due to limited bandwidth and delay constraints. Moreover, there is an ample opportunity for performing higher-level processing functions, such as object recognition that has the potential to drastically reduce the required bandwidth (e.g. by transmitting compressed images only when something ‘interesting‘ is detected). The energy cost of image processing must however be carefully minimized. Imaging could play and plays an important role in sensing devices for ambient intelligence. Computer vision can for instance be used for recognising persons and objects and recognising behaviour such as illness and rioting. Having a wireless camera as a camera mote opens the way for distributed scene analysis. More eyes see more than one and a camera system that can observe a scene from multiple directions would be able to overcome occlusion problems and could describe objects in their true 3D appearance. In real-time, these approaches are a recently opened field of research. In this thesis we pay attention to the realities of hardware/software technologies and the design needed to realize systems for distributed monitoring, attempting to propose solutions on open issues and filling the gap between AmI scenarios and hardware reality. The physical implementation of an individual wireless node is constrained by three important metrics which are outlined below. Despite that the design of the sensor network and its sensor nodes is strictly application dependent, a number of constraints should almost always be considered. Among them: • Small form factor to reduce nodes intrusiveness. • Low power consumption to reduce battery size and to extend nodes lifetime. • Low cost for a widespread diffusion. These limitations typically result in the adoption of low power, low cost devices such as low powermicrocontrollers with few kilobytes of RAMand tenth of kilobytes of program memory with whomonly simple data processing algorithms can be implemented. However the overall computational power of the WNS can be very large since the network presents a high degree of parallelism that can be exploited through the adoption of ad-hoc techniques. Furthermore through the fusion of information from the dense mesh of sensors even complex phenomena can be monitored. In this dissertation we present our results in building several AmI applications suitable for a WSN implementation. The work can be divided into two main areas:Low Power Video Sensor Node and Video Processing Alghoritm and Multimodal Surveillance . Low Power Video Sensor Nodes and Video Processing Alghoritms In comparison to scalar sensors, such as temperature, pressure, humidity, velocity, and acceleration sensors, vision sensors generate much higher bandwidth data due to the two-dimensional nature of their pixel array. We have tackled all the constraints listed above and have proposed solutions to overcome the current WSNlimits for Video sensor node. We have designed and developed wireless video sensor nodes focusing on the small size and the flexibility of reuse in different applications. The video nodes target a different design point: the portability (on-board power supply, wireless communication), a scanty power budget (500mW),while still providing a prominent level of intelligence, namely sophisticated classification algorithmand high level of reconfigurability. We developed two different video sensor node: The device architecture of the first one is based on a low-cost low-power FPGA+microcontroller system-on-chip. The second one is based on ARM9 processor. Both systems designed within the above mentioned power envelope could operate in a continuous fashion with Li-Polymer battery pack and solar panel. Novel low power low cost video sensor nodes which, in contrast to sensors that just watch the world, are capable of comprehending the perceived information in order to interpret it locally, are presented. Featuring such intelligence, these nodes would be able to cope with such tasks as recognition of unattended bags in airports, persons carrying potentially dangerous objects, etc.,which normally require a human operator. Vision algorithms for object detection, acquisition like human detection with Support Vector Machine (SVM) classification and abandoned/removed object detection are implemented, described and illustrated on real world data. Multimodal surveillance: In several setup the use of wired video cameras may not be possible. For this reason building an energy efficient wireless vision network for monitoring and surveillance is one of the major efforts in the sensor network community. Energy efficiency for wireless smart camera networks is one of the major efforts in distributed monitoring and surveillance community. For this reason, building an energy efficient wireless vision network for monitoring and surveillance is one of the major efforts in the sensor network community. The Pyroelectric Infra-Red (PIR) sensors have been used to extend the lifetime of a solar-powered video sensor node by providing an energy level dependent trigger to the video camera and the wireless module. Such approach has shown to be able to extend node lifetime and possibly result in continuous operation of the node.Being low-cost, passive (thus low-power) and presenting a limited form factor, PIR sensors are well suited for WSN applications. Moreover techniques to have aggressive power management policies are essential for achieving long-termoperating on standalone distributed cameras needed to improve the power consumption. We have used an adaptive controller like Model Predictive Control (MPC) to help the system to improve the performances outperforming naive power management policies.

Progettazione e Sviluppo di Applicazioni Web per Cloud Computing

Negli ultimi anni si sente sempre più spesso parlare di cloud computing. L'idea di fondo di questo concetto è quella di pagare per il solo effettivo utilizzo di un servizio, disponibile sulla rete, avendo a disposizione la possibilità di poter variare le proprie risorse utilizzabili a seconda delle necessità, che potrebbero essere, per esempio, applicazioni standard oppure spazi di storage per i dati. Quando cominciò a diffondersi l'utilizzo del Web, la rete Internet veniva raffigurata come una nuvola (cloud) in modo tale che si rendesse l'idea di un'entità esterna rispetto alla nostra casa o al nostro posto di lavoro, un qualcosa cioè al di fuori dei luoghi abituali in cui vengono utilizzati i PC. Tale rappresentazione diventa ora utile per poter spiegare il concetto di cloud computing. Infatti, grazie a questa nuova tecnologia, dati e programmi normalmente presenti nei nostri computer potranno ora trovarsi sul cloud. Molti reparti IT sono costretti a dedicare una parte significativa del loro tempo a progetti di implementazione, manutenzione e upgrade che spesso non danno un vero valore per l'azienda. I team di sviluppo hanno cominciato quindi a rivolgersi a questa nuova tecnologia emergente per poter minimizzare il tempo dedicato ad attività a basso valore aggiunto per potersi concentrare su quelle attività strategiche che possono fare la differenza per un'azienda. Infatti un'infrastruttura come quella cloud computing promette risparmi nei costi amministrativi che raggiungono addirittura il 50% rispetto ad un software standard di tipo client/server. Questa nuova tecnologia sta dando inizio ad un cambiamento epocale nel mondo dello sviluppo delle applicazioni. Il passaggio che si sta effettuando verso le nuove soluzioni cloud computing consente infatti di creare applicazioni solide in tempi decisamente più brevi e con costi assai inferiori, evitando inoltre tutte le seccature associate a server, soluzioni software singole, aggiornamenti, senza contare il personale necessario a gestire tutto questo. L'obiettivo di questa tesi è quello di mostrare una panoramica della progettazione e dello sviluppo di applicazioni Web nel cloud computing, analizzandone pregi e difetti in relazione alle soluzioni software attuali. Nel primo capitolo viene mostrato un quadro generale in riferimento al cloud, mettendo in luce le sue caratteristiche fondamentali, esaminando la sua architettura e valutando vantaggi e svantaggi di tale piattaforma. Nel secondo capitolo viene presentata la nuova metodologia di progettazione nel cloud, operando prima di tutto un confronto con lo sviluppo dei software standard e analizzando poi l'impatto che il cloud computing opera sulla progettazione. Nel terzo capitolo si entra nel merito della progettazione e sviluppo di applicazioni SaaS, specificandone le caratteristiche comuni ed elencando le piattaforme di rilievo allo stato dell'arte. Si entrerà inoltre nel merito della piattaforma Windows Azure. Nel quarto capitolo viene analizzato nel particolare lo sviluppo di applicazioni SaaS Multi-Tenant, specificando livelli e caratteristiche, fino a spiegare le architetture metadata-driven. Nel quinto capitolo viene operato un confronto tra due possibili approcci di sviluppo di un software cloud, analizzando nello specifico le loro differenze a livello di requisiti non funzionali. Nel sesto capitolo, infine, viene effettuata una panoramica dei costi di progettazione di un'applicazione cloud.

Workflow Patterns for Service Oriented Computing in JOLIE

Il presente lavoro di tesi ha come punto focale la descrizione, la verifica e la dimostrazione della realizzabilità dei Workflow Patterns di Gestione del Flusso(Control-Flow) e Risorse (Resource) definiti da parte della Workflow Pattern Initiative (WPI)in JOLIE, un innovativo linguaggio di programmazione orientato ai servizi nato nell'ambito del Service Oriented Computing. Il Service Oriented Computing (SOC) è un nuovo modo di pensare la programmazione di applicazioni distribuite, i cui concetti fondamentali sono i servizi e la composizione. L’approccio SOC definisce la possibilità di costruire un’applicazione in funzione dei servizi che ne realizzano il comportamento tramite una loro composizione, definita secondo un particolare flusso di lavoro. Allo scopo di fornire la necessaria conoscenza per capire la teoria, le meccaniche e i costrutti di JOLIE utilizzati per la realizzazione dei pattern, il seguente lavoro di tesi è stato diviso in quattro parti, corrispondenti ad altrettanti capitoli. Nel primo capitolo viene riportata una descrizione generale del SOC e della Business Process Automation (BPA), che costituisce l’ambiente in cui il SOC è inserito. Per questo viene fatta una disamina della storia informatica sui sistemi distribuiti, fino ad arrivare ai sistemi odierni, presentando in seguito il contesto del BPA e delle innovazioni derivanti dalle sue macro-componenti, di cui il SOC fa parte. Continuando la descrizione dell’approccio Service Oriented, ne vengono presentati i requisiti (pre-condizioni) e si cerca di dare una definizione precisa del termine “servizio”, fino all'enunciazione dei principi SOC declinati nell’ottica delle Service Oriented Architectures, presentando in ultimo i metodi di composizione dei servizi, tramite orchestrazione e coreografia. L’ultima sezione del capitolo prende in considerazione il SOC in un’ottica prettamente industriale e ne evidenzia i punti strategici. Il secondo capitolo è incentrato sulla descrizione di JOLIE, gli aspetti fondamentali dell’approccio orientato ai servizi, che ne caratterizzano profondamente la definizione concettuale (SOCK), e la teoria della composizione dei servizi. Il capitolo non si pone come una descrizione esaustiva di tutte le funzionalità del linguaggio, ma considera soprattutto i concetti teorici, le strutture di dati, gli operatori e i costrutti di JOLIE utilizzati per la dimostrazione della realizzabilità dei Workflow Pattern del capitolo successivo. Il terzo capitolo, più lungo e centrale rispetto agli altri, riguarda la realizzazione dei workflow pattern in JOLIE. All'inizio del capitolo viene fornita una descrizione delle caratteristiche del WPI e dei Workflow Pattern in generale. In seguito, nelle due macro-sezioni relative ai Control-Flow e Resource pattern vengono esposte alcune nozioni riguardanti le metodologie di definizione dei pattern (e.g. la teoria sulla definizione delle Colored Petri Nets) e le convezioni adottate dal WPI, per passare in seguito al vero e proprio lavoro (sperimentale) di tesi riguardo la descrizione dei pattern, l’analisi sulla loro realizzabilità in JOLIE, insieme ad un codice di esempio che esemplifica quanto affermato dall'analisi. Come sommario delle conclusioni raggiunte sui pattern, alla fine di ognuna delle due sezioni definite in precedenza, è presente una scheda di valutazione che, con lo stesso metodo utilizzato e definito dalla WPI, permette di avere una rappresentazione generale della realizzabilità dei pattern in JOLIE. Il quarto capitolo riguarda gli esiti tratti dal lavoro di tesi, riportando un confronto tra le realizzazioni dei pattern in JOLIE e le valutazioni del WPI rispetto agli altri linguaggi da loro considerati e valutati. Sulla base di quanto ottenuto nel terzo capitolo vengono definite le conclusioni del lavoro portato avanti sui pattern e viene delineato un’eventuale scenario riguardante il proseguimento dell’opera concernente la validazione ed il completamento della studio. In ultimo vengono tratte alcune conclusioni sia riguardo JOLIE, nel contesto evolutivo del linguaggio e soprattutto del progetto open-source che è alla sua base, sia sul SOC, considerato nell’ambito del BPA e del suo attuale ambito di sviluppo dinamico.

Client VoIP su Windows Mobile

Quando si parla di VoIP ci si riferisce ad un insieme di protocolli di comunicazione, tecnologie e metodi di trasmissione che permettono di effettuare conversazioni telefoniche attraverso reti a commutazione di pacchetto basata su IP, come Internet. Si tratta di una tecnologia che ha subito un forte crescita sia in ambito lavorativo che in ambito privato, questo fenomeno è in maggior parte dovuto al successo di applicazioni commerciali come Skype. Anche i dispositivi mobili hanno avuto un grande sviluppo e diffusione, sono passati da essere semplici telefoni cellulari a dispositivi in grado di fornire all’utente funzionalità avanzate come ad esempio navigazione internet, posta elettronica, riproduzione video, possibilità di installare applicazioni aggiuntive. Inoltre anche le reti dati sono migliorate in maniera considerevole negli ultimi anni, offrendo agli utenti una larghezza di banda sempre maggiore anche in mobilità. Tutti questi fattori hanno portato ad una crescente richiesta di applicazioni per dispositivi mobili in grado di sfruttare il VoIP. Per questi motivi si è deciso di progettare e sviluppare un applicazione VoIP per Windows Mobile, che offra tutte le funzioni necessarie ad un uso completo del VoIP e con un’interfaccia utente sia di facile utilizzo, per permettere anche agli utenti meno esperti di poter utilizzare la tecnologia VoIP

Dynamic power management: from portable devices to high performance computing

Electronic applications are nowadays converging under the umbrella of the cloud computing vision. The future ecosystem of information and communication technology is going to integrate clouds of portable clients and embedded devices exchanging information, through the internet layer, with processing clusters of servers, data-centers and high performance computing systems. Even thus the whole society is waiting to embrace this revolution, there is a backside of the story. Portable devices require battery to work far from the power plugs and their storage capacity does not scale as the increasing power requirement does. At the other end processing clusters, such as data-centers and server farms, are build upon the integration of thousands multiprocessors. For each of them during the last decade the technology scaling has produced a dramatic increase in power density with significant spatial and temporal variability. This leads to power and temperature hot-spots, which may cause non-uniform ageing and accelerated chip failure. Nonetheless all the heat removed from the silicon translates in high cooling costs. Moreover trend in ICT carbon footprint shows that run-time power consumption of the all spectrum of devices accounts for a significant slice of entire world carbon emissions. This thesis work embrace the full ICT ecosystem and dynamic power consumption concerns by describing a set of new and promising system levels resource management techniques to reduce the power consumption and related issues for two corner cases: Mobile Devices and High Performance Computing.

Evoluzione dei Modelli e delle Tecnologie per il Web: DART e HTML5 come caso di studio

Nell’ultimo decenno si è assisitito ad una frenetica evoluzione delle tecnologie di connessione e trasferimento dati, dagli impianti di fibra ottica sempre più diffusi e performanti, alle varie tecnologie mobile UMTS e LTE. Tutto ciò ha permesso a sempre più persone di poter spendere una maggiore fetta del proprio tempo sulla rete sia per svago che per lavoro. Questo ha portato col tempo l’utente interattivo alla ricerca di servizi remoti che prima usufruiva in locale, sia per motivi di portabilità e di interconnessione, sia per una semplice questione di sincronizzazione fra i vari dispositivi posseduti. Il presente progetto di tesi si pone come obiettivo di indagare con occhio ingegneristico all’evoluzione della struttura del web fino ad identificare e analizzare l’attuale necessità di poter avere in rete tutti quei servizi anche completi e strutturalmente complessi che prima si aveva sul proprio desktop; tutto ciò attraverso l’esempio di un nuovo linguaggio di sviluppo per applicazioni web strutturate proposto da Google: DART. In questa analisi non si potrà prescindere dallo studio attento della tecnologia che sin dagli inizi della rete ha fatto da struttura al web ovvero l’Html e il suo ultimo standard Hmtl5. Nella prima parte verrà mostrata, attraverso un breve percorso, la nascita e lo sviluppo del web, sino ai giorni nostri. Si effettuerà quindi una panoramica, rivisitando tutti più importanti passi che hanno portato la rete internet ad essere ciò che oggi utilizziamo, ponendo una particolare attenzione alle attuali esigenze di progettazione della struttura dei servizi web. Nel secondo capitolo viene introdotta la tecnologia a base del web, l’Html; attraverso una breve analisi dell’evoluzione di quest’ultima si arriverà sino all’attuale HTML5 e alle funzionalità offerte nell’ottica della programmazione web strutturata. Nel terzo capitolo si analizzerà in maniera più approfondita la necessità di un web strutturato e le potenzialità del progetto Dart attraverso alcuni esempi esplicativi. Infine si trarranno alcune conclusioni sull’attuale situazione del web, sulla necessità di un web strutturato e sulla possibilità di riuscita del progetto Dart.