An appraisal of electric automobile power sources

Road transportation, as an important requirement of modern society, is presently hindered by restrictions in emission legislations as well as the availability of petroleum fuels, and as a consequence, the fuel cost. For nearly 270 years, we burned our fossil cache and have come to within a generation of exhausting the liquid part of it. Besides, to reduce the greenhouse gases, and to obey the environmental laws of most countries, it would be necessary to replace a significant number of the petroleum-fueled internal-combustion-engine vehicles (ICEVs) with electric cars in the near future. In this article, we briefly describe the merits and demerits of various proposed electrochemical systems for electric cars, namely the storage batteries, fuel cells and electrochemical supercapacitors, and determine the power and energy requirements of a modern car. We conclude that a viable electric car could be operated with a 50 kW polymer-electrolyte fuel cell stack to provide power for cruising and climbing, coupled in parallel with a 30 kW supercapacitor and/or battery bank to deliver additional short-term burst-power during acceleration.

The promise of fuel cell-based automobiles

Fuel cell-based automobiles have gained attention in the last few years due to growing public concern about urban air pollution and consequent environmental problems. From an analysis of the power and energy requirements of a modern car, it is estimated that a base sustainable power of ca. 50 kW supplemented with short bursts up to 80 kW will suffice in most driving requirements. The energy demand depends greatly on driving characteristics but under normal usage is expected to be 200 Wh/km. The advantages and disadvantages of candidate fuel-cell systems and various fuels are considered together with the issue of whether the fuel should be converted directly in the fuel cell or should be reformed to hydrogen onboard the vehicle. For fuel cell vehicles to compete successfully with conventional internal-combustion engine vehicles, it appears that direct conversion fuel cells using probably hydrogen, but possibly methanol, are the only realistic contenders for road transportation applications. Among the available fuel cell technologies, polymer-electrolyte fuel cells directly fueled with hydrogen appear to be the best option for powering fuel cell vehicles as there is every prospect that these will exceed the performance of the internal-combustion engine vehicles but for their first cost. A target cost of $ 50/kW would be mandatory to make polymer-electrolyte fuel cells competitive with the internal combustion engines and can only be achieved with design changes that would substantially reduce the quantity of materials used. At present, prominent car manufacturers are deploying important research and development efforts to develop fuel cell vehicles and are projecting to start production by 2005.

Simulation Blocks for TOSSIM-T2"

We develop several hardware and software simulation blocks for the TinyOS-2 (TOSSIM-T2) simulator. The choice of simulated hardware platform is the popular MICA2 mote. While the hardware simulation elements comprise of radio and external flash memory, the software blocks include an environment noise model, packet delivery model and an energy estimator block for the complete system. The hardware radio block uses the software environment noise model to sample the noise floor.The packet delivery model is built by establishing the SNR-PRR curve for the MICA2 system. The energy estimator block models energy consumption by Micro Controller Unit(MCU), Radio,LEDs, and external flash memory. Using the manufacturer’s data sheets we provide an estimate of the energy consumed by the hardware during transmission, reception and also track several of the MCUs states with the associated energy consumption. To study the effectiveness of this work, we take a case study of a paper presented in [1]. We obtain three sets of results for energy consumption through mathematical analysis, simulation using the blocks built into PowerTossim-T2 and finally laboratory measurements. Since there is a significant match between these result sets, we propose our blocks for T2 community to effectively test their application energy requirements and node life times.

Criticality guided energy aware speculation for speculative multithreaded processors

Unending quest for performance improvement coupled with the advancements in integrated circuit technology have led to the development of new architectural paradigm. Speculative multithreaded architecture (SpMT) philosophy relies on aggressive speculative execution for improved performance. However, aggressive speculative execution comes with a mixed flavor of improving performance, when successful, and adversely affecting the energy consumption (and performance) because of useless computation in the event of mis-speculation. Dynamic instruction criticality information can be usefully applied to control and guide such an aggressive speculative execution. In this paper, we present a model of micro-execution for SpMT architecture that we have developed to determine the dynamic instruction criticality. We have also developed two novel techniques utilizing the criticality information namely delaying the non-critical loads and the criticality based thread-prediction for reducing useless computations and energy consumption. Experimental results showing break-up of critical instructions and effectiveness of proposed techniques in reducing energy consumption are presented in the context of multiscalar processor that implements SpMT architecture. Our experiments show 17.7% and 11.6% reduction in dynamic energy for criticality based thread prediction and criticality based delayed load scheme respectively while the improvement in dynamic energy delay product is 13.9% and 5.5%, respectively. (c) 2012 Published by Elsevier B.V.

Review on atomization and sprays of biofuels for IC engine applications

Ever increasing energy requirements, environmental concerns and energy security needs are strongly influencing engine researchers to consider renewable biofuels as alternatives to fossil fuels. Spray process being important in IC engine combustion, existing literature on various biofuel sprays is reviewed and summarized. Both experimental and computational research findings are reviewed in a detailed manner for compression ignition (CI) engine sprays and briefly for spark ignition (SI) engine sprays. The physics of basic atomization process of sprays from various injectors is included to highlight the most recent research findings followed by discussion highlighting the effect of physico-chemical properties on spray atomization for both biofuels and fossil fuels. Biodiesel sprays are found to penetrate faster and haw narrow spray plume angle and larger droplet sizes compared to diesel. Results of analytical and computational models are shown to be useful in shedding light on the actual process of atomization. However, further studies on understanding primary atomization and the effect of fuel properties on primary atomization are required. As far as secondary atomization is concerned, changes in regimes are observed to occur at higher air-jet velocities for biodiesel compared to those of diesel. Evaporating sprays revealed that the liquid length is longer for biodiesel. Pure plant oil sprays with potential use in CI engines may require alternative injector technology due to slower breakup as compared to diesel. Application of ethanol to gasoline engines may be feasible without any modifications to port fuel injection (PFI) engines. More studies are required on the application of alternative fuels to high pressure sprays used in Gasoline Direct Injection (GDI) engines.

Materials selection in mechanical design for microsensors and microactuators

Microsensors and microactuators are vital organs of microelectromechanical systems (MEMS), forming the interfaces between controller and environment. They are usually used for devices ranging in size at sub-millimeter or micrometer level, transforming energy between two or more domains. Presently, most of the materials used in MEMS devices belong to the silicon material system, which is the basis of the integrated circuit industry. However, new techniques are being explored and developed, and the opportunities for MEMS materials selection are getting broader. The present paper tries to apply 'performance index' to select the material best suited to a given application, in the early stage of MEMS design. The selection is based on matching performance characteristics to the requirements. A series of performance indices are given to allow a wide range comparison of materials for several typical sensing and actuating structures, and a rapid identification of candidates for a given task. (C) 2002 Elsevier Science Ltd. All rights reserved.

Comparing the sustainability of an innovative dry sanitation (Ecosan) system in China to a conventional waterborne sanitation system

The use of sustainability indicators for evaluating sanitation systems is applied to the Erdos Eco- Town Project (EETP) in China for illustration. The EETP is the largest urban settlement in the world employing ecological sanitation, which incorporates separation of waste streams, dry toilets, and resource recovery. The EETP’s dry sanitation system is compared against the Dongsheng District’s conventional sewer and centralised STP. The two systems are compared based on technological, environmental, economic, and societal indicators. Overall, the two systems perform reasonably well from a technological perspective. The conventional system performs significantly better than the dry system with regards to land and energy requirements, and global warming potential; it also performs better based on freshwater aquatic and terrestrial ecotoxicity potentials, but by a smaller margin. The dry system has superior environmental performance based on water consumption, eutrophication potential, and nutrient and organic matter recovery. The dry system is a more costly system as it requires greater infrastructure and higher operational costs, and does not benefit from economies of scale. The waterborne system performs better based on the societal indicators largely because it is a well-established system.

Sustainable IT and IT for sustainability

Energy and sustainability have become one of the most critical issues of our generation. While the abundant potential of renewable energy such as solar and wind provides a real opportunity for sustainability, their intermittency and uncertainty present a daunting operating challenge. This thesis aims to develop analytical models, deployable algorithms, and real systems to enable efficient integration of renewable energy into complex distributed systems with limited information.

The first thrust of the thesis is to make IT systems more sustainable by facilitating the integration of renewable energy into these systems. IT represents the fastest growing sectors in energy usage and greenhouse gas pollution. Over the last decade there are dramatic improvements in the energy efficiency of IT systems, but the efficiency improvements do not necessarily lead to reduction in energy consumption because more servers are demanded. Further, little effort has been put in making IT more sustainable, and most of the improvements are from improved "engineering" rather than improved "algorithms". In contrast, my work focuses on developing algorithms with rigorous theoretical analysis that improve the sustainability of IT. In particular, this thesis seeks to exploit the flexibilities of cloud workloads both (i) in time by scheduling delay-tolerant workloads and (ii) in space by routing requests to geographically diverse data centers. These opportunities allow data centers to adaptively respond to renewable availability, varying cooling efficiency, and fluctuating energy prices, while still meeting performance requirements. The design of the enabling algorithms is however very challenging because of limited information, non-smooth objective functions and the need for distributed control. Novel distributed algorithms are developed with theoretically provable guarantees to enable the "follow the renewables" routing. Moving from theory to practice, I helped HP design and implement industry's first Net-zero Energy Data Center.

The second thrust of this thesis is to use IT systems to improve the sustainability and efficiency of our energy infrastructure through data center demand response. The main challenges as we integrate more renewable sources to the existing power grid come from the fluctuation and unpredictability of renewable generation. Although energy storage and reserves can potentially solve the issues, they are very costly. One promising alternative is to make the cloud data centers demand responsive. The potential of such an approach is huge.

To realize this potential, we need adaptive and distributed control of cloud data centers and new electricity market designs for distributed electricity resources. My work is progressing in both directions. In particular, I have designed online algorithms with theoretically guaranteed performance for data center operators to deal with uncertainties under popular demand response programs. Based on local control rules of customers, I have further designed new pricing schemes for demand response to align the interests of customers, utility companies, and the society to improve social welfare.

Análise da concordância entre o plano dietético Dietary Approaches to Stop Hypertension (DASH) e o padrão alimentar de pacientes hipertensos

A adoção do plano dietético Dietary Approaches to Stop Hypertension (DASH) tem sido enfatizado na população hipertensa como uma importante estratégia no controle dos níveis pressóricos elevados. O objetivo deste estudo foi analisar o consumo alimentar de macro e micronutrientes em pacientes hipertensos, em especial do sódio, cálcio, potássio e magnésio, e comparar com as recomendações dietéticas contidas no plano DASH. Estudo transversal envolvendo uma amostra de conveniência composta por 113 hipertensos entre 40 e 69 anos. A medida da pressão arterial (PA) foi determinada com aparelho eletrônico devidamente calibrado e a avaliação dietética obtida pelo questionário de freqüência do consumo alimentar. Os alimentos ingeridos foram convertidos em porções e distribuídos em diferentes grupos alimentares. A faixa de porções recomendadas pelo plano DASH foi determinada com base na média das necessidades energéticas desta amostra permitindo assim uma posterior comparação com o hábito alimentar dos hipertensos, utilizando um escore de pontos com pontuação máxima de 9 pontos. A amostra foi dividida em três grupos: grupo B que obteve 2,5 a 4,0 pontos (n=34; 30%), grupo M entre 4,5 a 5,0 pontos (n=43; 38%) e grupo A que obteve 5,5 a 8,0 pontos (n=36; 32%). Não foram observadas diferenças significativas na média da PA sistólica (14024 vs 13823 vs 13515 mmHg) e diastólica (8617 vs 8813 vs 8410 mmHg). Apesar do grupo A consumir mais proteínas e gordura monoinsaturada, foi detectado um excesso pronunciado na ingestão de gordura saturada, colesterol e das calorias totais, por este grupo de pacientes. No que tange a ingestão dos micronutrientes, o grupo A apresentou consumo significativamente maior de cálcio, potássio e magnésio, refletido pela maior ingestão de vegetais e frutas em comparação aos grupos B e M. A média de ingestão do sódio intrínseco foi significativamente maior no grupo A (4,12,0 vs 3,11,1 vs 2,71,1 g/dia). Foram detectadas, apenas no grupo A, correlações entre PA sistólica e o percentual de proteína (r = -0,5; p=0,002) e PA sistólica e o percentual de carboidrato (r = 0,4; p=0,02). Apenas um terço dos hipertensos avaliados apresentaram padrão alimentar mais concordante com o plano DASH e com maior ingestão de proteínas, gordura monoinsaturada, fibras, cálcio, potássio e magnésio. Entretanto, o consumo mais elevado de sódio, gordura saturada, colesterol e das calorias totais por este grupo de pacientes poderia restringir uma maior queda dos níveis pressóricos elevados.

Comparação do Gasto energético de repouso obtido pela calorimetria indireta com as equações de predição em pacientes idosos em tratamento crônico de hemodiálise

Assim como na população geral, as necessidades energéticas diárias dos pacientes em tratamento crônico de hemodiálise (HD) podem ser calculadas multiplicando-se o gasto energético de repouso (GER) pelo nível de atividade física. Até o momento, não há estudos que avaliaram se as equações de predição são precisas para se estimar o GER de idosos em HD. O objetivo do presente estudo foi avaliar a concordância entre o GER obtido pela calorimetria indireta e as equações de predição de Harris&Benedict, Schofield e a proposta pelo documento da Organização Mundial de Saúde de 1985 (FAO 1985) nos pacientes idosos em HD. Tratou-se de um estudo transversal, onde foi avaliado o GER de 57 pacientes idosos não institucionalizados (> 60anos) em tratamento crônico de HD mensurado pela calorimetria indireta e comparado com as equações de predição de Harris&Benedict, Schofield e FAO 1985.A concordância entre o GER medido e as equações foi realizada pelo coeficiente de correlação intraclasse e pela análise de Bland-Altman. Neste estudo pode-se observar que o GER estimado pelas 3 equações foi significantemente maior do que o obtido pela calorimetria indireta. Um grau de reprodutibilidade moderado foi observado entre a calorimetria indireta e as equações. A superestimação foi o principal erro observado, sendo presente na metade dos pacientes. A subestimação foi vista em aproximadamente em 10 % dos pacientes. Com base nesses achados podemos concluir que as 3 equações tiveram uma performance similar ao estimar o GER. E estas podem ser utilizadas para calcular o GER de idosos em HD, na medida em que os nutricionistas reconheçam seus possíveis erros, principalmente quando as equações de predição subestimam o GER medido.

Desenvolvimento de técnicas de otimização da programação das limpezas de redes de trocadores de calor

Trocadores de calor são equipamentos muito utilizados na indústria de processos com o objetivo de modificar a temperatura e/ou o estado físico de correntes materiais. Uma rede de trocadores de calor pode ser definida como um grupo de trocadores de calor interligados, a fim de reduzir as necessidades de energia de um sistema. No entanto, durante a operação de uma rede, a eficiência térmica dos trocadores de calor diminui devido à deposição. Esse efeito promove o aumento dos custos de combustível e das emissões de carbono. Uma alternativa para mitigar este problema baseia-se no estabelecimento de uma programação das limpezas dos trocadores de calor durante a operação de rede. Este tipo de abordagem ocasiona uma situação na qual ocorre um conflito de escolha: a limpeza de um trocador de calor pode recuperar a sua eficiência térmica, mas implica custos adicionais, tais como, mão-de-obra, produtos químicos, etc. Além disso, durante a limpeza, o trocador de calor tem de ser contornado por uma corrente de by-pass, o que aumenta temporariamente o consumo de energia. Neste contexto, o presente trabalho tem como objetivo explorar diferentes técnicas de otimização envolvendo métodos estocásticos e heurísticos. Com este objetivo foi desenvolvido um conjunto de códigos computacionais integrados que envolvem a simulação pseudo-estacionária do comportamento da rede relacionado com incrustações e a otimização da programação das limpezas deste tipo de sistema. A solução do problema indica os períodos de tempo para a limpeza de cada trocador de calor. Na abordagem estocástica empregada, os parâmetros do algoritmo genético, como probabilidade de crossover e probabilidade de mutação, foram calibrados para o presente problema. A abordagem heurística desenvolvida se deu através da sequência do conjunto de movimentos zero, um e dois. De forma alternativa, desenvolveu-se a metodologia heurística recursiva na qual os conjuntos de movimentos um e dois foram empregados recursivamente. Também foi desenvolvida a abordagem híbrida que consistiu em diferentes combinações da metodologia estocástica e heurística. A análise comparativa entre as metodologias empregadas teve como objetivo avaliar a abordagem mais adequada para o presente problema da programação das limpezas em termos de função objetivo e esforço computacional. O desempenho da abordagem proposta foi explorado através de uma série de exemplos, incluindo uma refinaria real brasileira. Os resultados foram promissores, indicando que as técnicas de otimização analisadas neste trabalho podem ser abordagens interessantes para operações que envolvam redes de trocadores de calor. Dentre as abordagens de otimização analisadas, a metodologia heurística desenvolvida no presente trabalho apresentou os melhores resultados se mostrando competitiva frente às abordagens comparadas da literatura

Prey consumption of Steller sea lions (Eumetopias jubatus) off Alaska: How much prey do they require?

The effects of seasonal and regional differences in diet composition on the food requirements of Steller sea lions (Eumetopias jubatus) were estimated by using a bioenergetic model. The model considered differences in the energy density of the prey, and differences in digestive efficiency and the heat increment of feeding of different diets. The model predicted that Steller sea lions in southeast Alaska required 45–60% more food per day in early spring (March) than after the breeding season in late summer (August) because of seasonal changes in the energy density of the diets (along with seasonal changes in energy requirements). The southeast Alaska population, at 23,000 (±1660 SD) animals (all ages), consumed an estimated 140,000 (±27,800) t of prey in 1998. In contrast, we estimated that the 51,000 (±3680) animals making up the western Alaska population in the Gulf of Alaska and Aleutian Islands consumed just over twice this amount (303,000 [±57,500] t). In terms of biomass removed in 1998 from Alaskan waters, we estimated that Steller sea lions accounted for about 5% of the natural mortality of gadids (pollock and cod) and up to 75% of the natural mortality of hexagrammids (adult Atka mackerel). These two groups of species were consumed in higher amounts than any other. The predicted average daily food requirement per individual ranged from 16 (±2.8) to 20 (±3.6) kg (all ages combined). Per capita food requirements differed by as much as 24% between regions of Alaska depending on the relative amounts of low–energy-density prey (e.g. gadids) versus high–energy-density prey (e.g. forage fish and salmon) consumed. Estimated requirements were highest in regions where Steller sea lions consumed higher proportions of low–energy-density prey and experienced the highest rates of population decline

Ascorbic acid turnover in the ocular tissues of some fishes

The ascorbic acid turnover from the ocular tissues of 11 species of fishes from a culture pond and the river Godavari (Andhra Pradesh, India) has been studied. The free ascorbic acid and ascorbigen contents were more in the case of bottom or deep dwelling fishes and the least in the case of surface living forms, depending upon the light penetration in the area that each species inhabits. The enzymic utilization and ascorbic acid-macromolecule complex varied among the fishes possibly depending upon individual energy requirements and not upon light intensity. No size-related or sex-related variation was observed. No variation was observed between riverine and pond-reared fishes of the same species.

Interactions of dietary levels of protein and energy on rainbow trout (Oncorhynchus mykiss) in desert brackish water

A 3x3 factorial experiment was conducted to determine the optimum protein to energy (P/E) ratio for rainbow trout in brackish water. Three crud protein levels and three energy levels at each protein level were utilized. Diets were made in semi-purified that in all of them fish meal, casein and gelatin as the sources of protein and dextrin, starch and oil as the sources of energy were used. Each of experimental diets was fed to triplicate groups of 20 fish with an average individual weight of 81.5 g in 9 2000-1 flow trough fiberglass tanks. During this experiment water temperature, dissolved oxygen, PH and EC were 15±2°C, 6.5-8.1 mg/1, 7.7-8.6 and 25400 grills respectively. The diets were fed at a rate between 1.6-2 wet body weight% per day depended to water temperature in three equal rations and adjusted two weekly for 84 days. At each of protein levels, weight gain percent (%WG), average daily growth percent (%ADG), protein efficiency ratio (PER), apparent net protein utilization percent (%ANPU), or percent of protein deposited, specific growth rate (SGR) and condition factor (CF) were found to increase and food conversion ratio (FCR) was found to decrease with an increasing energy levels from 370 to 430 Kcal/100g. Fish fed a 35% protein, 430 Kcal/100g energy diet with a P/E ratio of 81.4 mg protein/ Kcal PFV energy, attained the best growth performance. Fat and moisture of carcass were affected by protein and energy levels of test diets while protein and ash of carcass were relatively constant in different treatments.

Effect of secondary ligands' size on energy transfer and electroluminescent efficiencies for a series of europium(III) complexes, a density functional theory study

In this paper, a quantum chemistry method was used to investigate the effect of different sizes of substituted phenanthrolines on absorption, energy transfer, and the electroluminescent performance of a series of Eu(TTA)(3)L (L = [1,10] phenanthroline (Phen), Pyrazino[2,3-f][1,10]phenanthroline (PyPhen), 2-methylprrazino[2,3-f][1,10] phenanthroline(MPP), dipyrido[3,2-a:2',3'-c]phenazine(DPPz), 11-methyldipyrido[3,2-a:2',3'c]phenazine(MDPz), 11.12-dimethyldipyrido[3,2-a:2',3'-c]phenazine(DDPz), and benzo[i]dipyrido[3,2-a:2',3'-c]phenazine (BDPz)) complexes. Absorption spectra calculations show that different sizes of secondary ligands have different effects on transition characters, intensities, and absorption peak positions.