YAG∶Eu~(3+)、Bi~(3+)的溶胶-凝胶法合成及其结构和发光性能

溶胶－凝胶法以其各组分混合均匀性好、反应温度低、节省能源等诸多优点而引起了人们极大兴趣［１，２］．近年来，利用该法研制玻璃和陶瓷等无机材料的报道越来越多［３，４］．但研制稀土固体发光材料的报道则较少．钇铝石榴石Ｙ３Ａｌ５Ｏ１２（ＹＡＧ）是一种很好的基…

Synthesis and properties of optically active aromatic polyimides derived from optically pure 1,1'-bi-2-naphthol

A series of new optically active aromatic polyimides containing axially dissymmetric 1,1'-binaphthalene-2,2-diyl units were prepared from optically pure (R)-(+)-or (S)-(-)-2,2'-bis(3,4-dicarboxyphenoxy)-1,1'-binaphthalene dianhydrides and various aromatic diamines via a conventional two-step procedure that included ring-opening polycondensation and chemical cyclodehydration. The optically pure isomer of dianhydride was prepared by a nucleophilic substitution of optically pure (R)-(+)or (S)-(-)1,1'-bi-2-naphthol with 4-nitrophthalonitrile in aprotic polar solvent and subsequent hydrolysis of the resultant tetranitrile derivatives, followed by the dehydration of the corresponding tetracarboxylic acids to obtain the dianhydrides. These polymers were readily soluble in common organic solvents such as N,N-dimethylacetamide, N-methyl-2-pyrrolidone, and m-cresol, etc., and have glass transition temperatures of 251-296 degrees C, and 5% weight loss occurs not lower than 480 degrees C. The specific rotations of the optically active polyimides ranged from +196 degrees to +263 degrees, and the optical stability and chiroptical properties of them were also studied. (C) 1997 John Wiley & Sons, Inc.

The synthesis of a 1,1'-bi-2-naphthol-based bis(ether anhydride) and aromatic polyimides derived therefrom

2,2'-Bis(3,4-dicarboxyphenoxy)-1,1'-binaphthyl dianhydride was used as a new monomer with various aromatic diamines to obtain polyimides by the usual two-step method. The bis(ether anhydride) was prepared by a nucleophilic substitution of I,1'-bi-2-naphthol with N-phenyl-4-chlorophthalimide, N-methyl-4-nitrophthalimide or 4-nitrophthalonitrile in aprotic polar solvent, and subsequent hydrolysis of the resulting bis(ether imide)s or bis(ether dinitrile), and then dehydration of the corresponding tetracarboxylic acid to afford the dianhydride. Most of the obtained polyimides were soluble in chloroform, pyridine, DMF, etc. The polyimide prepared from p-phenylene diamine was partial crystalline, whereas the others showed amorphous patterns in a WAXD study. These polymers have glass transition temperatures between 255-294 degrees C and 5% weight loss temperatures in the range of 502-541 degrees C in nitrogen and 473-537 degrees C in air. (C) 1997 Elsevier Science Ltd.

Eu~(3+)在YAG中的发光性能及Eu~(3+)、Bi~(3+)间的能量传递

ＹＡＧ作为一种新型的功能材料已引起了人们极大的兴趣，我们采用溶胶、凝胶法合成了ＹＡＧ：Ｅｕ和ＹＡＧ：Ｅｕ，Ｂｉ，研究了Ｅｕ３＋在ＹＡＧ中的发光及Ｅｕ３＋，Ｂｉ３＋间的能量传递。１实验部分将纯度９９．９９％Ｙ２Ｏ３，Ｅｕ２Ｏ３和Ｂｉ２Ｏ３分别溶于ＧＲ级ＨＮＯ３中，配制成一定浓度的溶液，然后以Ｙ（ＮＯ３）３，Ｅｕ（ＮＯ３），Ｂｉ（ＮＯ３）３和Ａｌ（ＮＯ３）３为初始原料，按（Ｙ１－ｘＥｕｘ）３ＡＬ５Ｏ１２和（Ｙ１－ｘ－ｙＥｕｘＢｉｙ）３Ａｌ５Ｏ１２化学式量配比，充分混匀后加入柠檬酸，缓慢蒸干，在４００℃灼烧２ｈ

Magnetic and electric properties of Bi(La)Sr(Ca)Mn2O6

Bi1-xLaxSrMn2O6 and BiSr1-xCaxMn2O6 are prepared by solid state reaction. They are n-type semiconductors with ferromagnetism at room temperture. When Bi is substituted partly by rare earth, a negative magnetoresistance effect is observed in the pellet of Bi1-xLaxSrMn2O6. There are semiconductor-metal transitions at 820 K in BiSrMn2O6. The transitions are attributed to the magnetic transition at high temperature. The substitution of Ca for Sr makes the transition temperature increase. However, when Bi is partly substituted by La, the solid solution does not change into metal. (C) 1996 Academic Press, Inc.

多组分氧化物Ag－Bi－V－Mo－O催化作用的光电子能谱研究

多组分氧化物Ａｇ－Ｂｉ－Ｖ－Ｍｏ－Ｏ催化作用的光电子能谱研究宋伟，李静，窦伯生（中国科学院长春应用化学研究所长春１３００２２）关键词　钼钒酸铋，助剂Ａｇ，ＸＰＳ，Ａｒ~＋刻蚀，氧化还原对于烃类选择氧化反应中复合氧化物的催化作用，普遍认为是Ｒｅｄｏｘ机...

丙烷氧化反应中多组分氧化物Bi－V－Mo－O催化作用的红外光谱研究

丙烷氧化反应中多组分氧化物Ｂｉ－Ｖ－Ｍｏ－Ｏ催化作用的红外光谱研究李静，宋伟，窦伯生（中国科学院长春应用化学研究所长春１３００２２）关键词钼钒酸铋，丙烷，选择氧化，催化作用机理，红外光谱迄今对于含有钼、铋复合氧化物催化剂的活性中心和作用机理存在不同看...

EFFECT OF V, NB, AND TA DOPING ON THE 2223 PHASE-FORMATION AND THE CRYSTAL-STRUCTURE IN THE BISRCACUO SYSTEM

X-ray diffraction and electrical and diamagnetic analyses revealed that the 2223 phase was significantly enhanced by high-valence cation (V5+, Nb5+, Ta5+, etc.) doping in BiSrCaCuO samples. The optimum nominal composition was Bi1.6M0.4Sr2Ca2Cu3 O(y)(M =

STRUCTURE AND CATALYTIC ACTIVITY FOR PROPYLENE OXIDATION OF BI-MO-NB COMPLEX OXIDE CATALYSTS

The structure and catalytic,activity for propylene oxidation of series oxides B2Mo3-3X-Nb2XO12-4X (X=0.00, 0.02, 0.05, 0.10, 0.15, 0.20, 0.25) have been studied by means of XRD, IR, Raman, SEM, ESR and so on. The results showed that in the range of X < 0.

Bi－Mo－Nb复合氧化物催化作用机理的ESR和XPS研究

用ＥＳＲ对比研究了掺杂Ｎｂ对α－Ｂｉ２Ｍｏ３Ｏ（１２）催化剂丙烯还原和氧再氧化的影响，并用ＸＰＳ原位Ａｒ＋溅射研究了催化剂的还原与再氧化过程，观察了上述过程中催化剂内金属离子的价态变化和晶格氧的扩散现象。提出了Ｂｉ－Ｍｏ间通过晶格氧扩散所发生的氧化还原作用及模型，探讨了Ｎｂ（５＋）取代Ｍｏ（６＋）产生的氧空位对加速晶格氧扩散所起的作用。

Y_2O_3－Nb_2O_5－B_2O_3：Eu~（3＋）·Bi~（3＋）的燐光体的晶体结构与光谱性质

采用常规固相反应于１２００℃下制备了具有褐钇铌矿结构的Ｙ２Ｏ３·Ｎｂ２Ｏ５·Ｂ２Ｏ３（Ｙ（０．９３）Ｅｕ（０．０７））２Ｏ３·Ｎｂ２Ｏ５·Ｂ２Ｏ３和（Ｙ（０．９１）Ｅｕ（０．０７）Ｂｉ０．０２））２Ｏ３·Ｎｂ２Ｏ５·Ｂ２Ｏ３等光体，研究了它们的发光性质：结果表明，在２６８ｎｍ紫外光激发下，由于ＮｂＯ４基团于４１０ｎｍ处发生１Ｔ→１Ａ１跃迁，致使Ｙ２Ｏ５·Ｎｂ２Ｏ５·Ｂ２Ｏ３呈现更亮的紫外发射。体系中的Ｂ２Ｏ３可降低反应温度，增强ＮｂＯ４和Ｅｕ（３＋）的发光强度。（Ｙ（０．０９１）Ｅｕ（０．０７）Ｂｉ（０．０２））２Ｏ３·Ｎｂ２Ｏ５·Ｂ２Ｏ３燐光体系中所观察到的ＮｂＯ４→Ｅｕ（３＋）和Ｂｉ（３＋）→Ｅｕ（３＋）的能量传递使红光发射明显增强。

Bi-Mo-Nb复台氧化物的结构与对丙烯氧化的催化活性

本文用XRD,IR,Raman,SEM和ESR等方法研究了系列氧化物Bi_2Mo_(3-3x)Nb_(2x)O_(12-4x)(X=0.00,0.02,0.05,0.10,0.15,0.20,0.25)的结构和对丙烯氧化的催化活性,结果表明,在X≤0.25范围内,催化剂基本保持典型的α-Bi_2Mo_3O_(12)结构,少量Nb~(5+)的掺杂,可取代晶格中的Mo~(6+),产生氧空位,无序分布的氧空位的浓度先随X值的增加而增加,当X=0.15时达最大值,催化剂对丙烯氧化的催化活性与这种氧空位的浓度成正比,反应遵循Redox机理.

溶胶－凝胶法合成（Mg，Ca）O－SiO_2∶Eu~（3＋），Bi~（3＋）发

以Ｍｇ（ＮＯ３）２、Ｃａ（ＮＯ３）２、Ｅｕ（ＮＯ３）３、Ｂｉ（ＮＯ３）３、ＬｉＮＯ３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度下，首次合成０．７０１ｍｏＩＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏＩＳｉＯ２∶０．０６ｍｏｌＥｕ（３＋），０．００２ｍｏＩＢｉ（３＋）（加入Ｌｉ＋作为电荷补偿剂）发光体。得到了最佳合成条件。研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程。探讨了发光体在不同激发波长激发下的发光特性以及在激活剂、敏化剂不同掺杂量下的发光行为。讨论了在（Ｍｇ（ａ）Ｏ－ＳｉＯ２基质中Ｂｉ（３＋）对Ｅｕ（３＋）的能量传递和敏化作用。

EFFECT OF CODOPING SB AND V TO THE BIPBSRCACUO SYSTEM

With XRD, R- T curves, and a.c chi measurements, the doping and codoping effects of Sb and V to a Cu-deficient Pb-doped Bi system have been studied. A sample singly doped with V possesses a T(c) about 2 K lower than that of a sample singly doped with Sb. This is attributed to the different sites of their substitution. It was observed that for promoting 2223 phase formation, Sb and V works cooperatively, and the codoping of Sb may enhance the 2223 phase formed. With a low doping level of Sb, the optimum doping amount of V is 0.3, i.e., with a nominal composition of Bi1.5Pb0.3Sb0.06Sr2Ca2Cu2.4V0.3Oy. A sample in which the 2223 phase is the dominant phase and which has a zero resistance transition temperature of 105 K has been obtained.

LUMINESCENCE OF BI(3+) AND THE ENERGY-TRANSFER FROM BI(3+) TO R(3+) (R=EU,DY,SM,TB) IN ALKALINE-EARTH BORATES

At room temperature, the Bi3+ ion shows broad band characters of its luminescence in Ca2B2O5, M3B2O6 ( M=Ca,Sr ) and SrB4O7. The maxima of the Bi3+ S-1(0)-->P-3(1) absorption bands are located in the range of 240-300nm, but the energy variation of the corresponding P-3(1)-->S-1(0) emissions is very large. The maxima of these emission bands change from 350nm in Ca3B2O6;Bi3+ to 586nm in SrB4O7:Bi3+. The Stokes shift of the Bi3+ luminescence increases from 6118 cm-1, in Ca2B2O5:Bi3+, to 24439 cm-1, in SrB4O7:Bi3+. The emission intensity of the Bi3+ luminescence increases with the decreasing Stokes shift. It has been found that in Ca2B2O5, the Bi3+ ion could transfer its excitation energy to the R3+ ions ( R=Eu, Dy, Sm, Tb ) , but in, Ca3B2O6 and Sr3B2O6, only Bi3+-->Eu3+ was observed. No energy transfer from Bi3+ to R3+ was detected in SrB4O7.