Estudo das propriedades mecânicas do aço SAE 1312 modificado ao nióbio

The study of mechanical properties of high-alloy special steels is of great interest of the steel industry due to the great demand by companies that manufacture automotive components of high criticality, and also because of its high commercial value. However, the development of this type of alloy metals demand highly technical knowledge. Among these extremely important kinds of steel, the subject which is the interest of this study is the special steel modified by niobium. The manganese and niobium are the main alloying elements in the composition of these steels, both of them increase the stability of the austenite region, however, manganese increases the hardenability and tensile yield strength, and niobium increases the mechanical strength and promotes refining the grain. The mechanical characterization of steel SAE 1312 modified the niobium was made in order to gain a better understanding of the influence on the mechanical properties caused by aging at different temperatures and for different reductions in the drawing of gauge material. This characterization was made by means of tensile test and hardness. This material showed an increase in yield strength and hardness when gauge with large reductions during the wiredrawing, but when subjected to aging temperatures higher than 300 ° C had a slight loss of these properties

Crescimento de apatita na superfície da liga Ti-25Ta empregando dois tipos de tratamento de superfície: biomimético e deposição de polímero por eletrofiação

Titanium and its alloys has been widely used as materials for metallic biomaterials implants are usually employed to restore the hard tissue function, being used for artificial joints and bones, synthetic plates, crowns, dental implants and screws . Objective of this work was the surface modification of Ti-alloy 25Ta from biomimetic surface treatment of employment and deposition of polymer by electrospinning. The league was obtained from the fusion of the pure elements in the arc furnace with controlled atmosphere. The ingots were subjected to heat treatment, cold forged and sectioned discs with 13 mm diameter and 3 mm thick. Two surface treatments was evaluated, biomimetic and electrospinning with PCL fiber. The biomimetic treatment was performed involving alkaline treatment for three molarities 1.5M, 3M and 5M with immersion in SBF. The electrospinning was performed using PCL polymer alloy surface after the alkali treatment Ti25Ta 1M. For this group the polymer coated surfaces were immersed in calcium phosphate containing solution for immobilization of apatite. The results were compared with previous studies using surface treatment group to verify hydroxyapatite formation on the sample surface and it is concluded that the best condition is biomimetic treatment with 5M alkali treatment and heat treatment at 80 ° C for 72 hours

Comparação do custo e benefício entre o bloqueio ovariano com protocolo curto modificado e protocolo com antagonista em tratamentos de fertilização assisitida

Pós-graduação em Ginecologia, Obstetrícia e Mastologia - FMB

Caracterização de estruturas de óxido de estanho modificado como sensores de gases

Pós-graduação em Química - IQ

Otimização do processamento de partículas lead-free para aplicação em compósitos polímero/cerâmica com propriedades piezoelétrica e fotoluminescente

Pós-graduação em Química - IQ

Tratamento da classe II hiperdivergente com o aparelho extra bucal de Thurow modificado

Objectives: natural dentofacial changes and that induced by the Thurow modified extra oral appliance (TMEOA) were evaluated in this prospective study. Methodology: the data consisted of fifteen Class II division 1 children 7 to 10 years old, with anterior open bite and hiperdivergent facial pattern treated with the Thurow appliance and of fifteen Class II division 1 children followed longitudinally from 6 to 12 years of age without treatment (Burlington Growth Centre, Toronto University, Canada). The analyses were based in traditional measurements obtained in lateral cephalometric radiographs scanned with the aid of the software Radiocef Studio®. Radiographs were taken in the beginning and after 1 year of treatment for the treated group and at the 6, 9 and 12 years of age for the control group. Results: the data analysis showed that the TMEOA significantly reduced the SNA, ANB, AOBO, SNPOc SNPM, SGO/NMe, OJ e OB. On the other hand the appliance did not interfere with the SNB e SNPP. The natural growth promoted significant change in the ANB, AOBO, SNPOc, OJ e OB from 6 to 9 years and in the SNB, SNPOc e SGo/NMe from 9 to 12 years. The restriction of the maxillary growth (SNA), reduction of the skeletal discrepancy (ANB) and the reduction of the overjet (OJ) were significant with the treatment considering the natural growth as verified in the control group. Conclusion: the TMEOA corrected the skeletal Class II malocclusion by maxillary restriction, reducing the overjet, closing the anterior open bite and decreasing both the hyper divergent facial pattern and mandible plane inclination.

Aparelho de Thurow modificado e aparelho ortodôntico fixo no tratamento da classe II com mordida aberta anterior

This work had aim to present two clinical cases with open bite Class II malocclusion that treated in the phase of the mixed dentition with the modified Thurow appliance and in the permanent dentition with fixed appliance. The dentoskeletal effects of these appliances were carefully analyzed with the aid of metallic implants inserted in both maxilla and mandible. The correction of the malocclusion and the improvement of the skeletal, dental and facial relationship were observed in both cases. The modified Thurow appliance followed by fixed-appliance as a two-phase treatment protocol revealed to be an effective treatment approach for the two young people that initially presented a Class II division 1 malocclusion associated to anterior open bite presented.

Meaw modificado: apresentação da técnica para correção das mordidas abertas e na finalização dos tratamentos ortodônticos

This study presents a new treatment technique, that uses TMA archwires with standardized curvatures, associated to intermaxillary elastics, that can do both offer satisfactory results in short period of the treatment time in the open bites cases and in the finishing procedures of the orthodontic treatment.

Caracterização química e resistência à flexão de uma resina acrílica após a incorporação de um polímero com atividade antimicrobiana

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Resistência à flexão de uma resina acrílica após a incorporação de um polímero antimicrobiano

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Preparo e caracterização de compósitos polímero/cerâmica com potencial aplicação como sensor multifuncional

Pós-graduação em Química - IQ

Liberação controlada de nutrientes e novos sistemas para avaliação de espécies químicas empregadas na fertilização

Pós-graduação em Química - IQ

Eficiência reprodutiva e comportamento parental de camundongos isogênicos e heterogênicos produzidos em ambiente modificado

Pós-graduação em Zootecnia - FMVZ

Preparação pelo método poliol modificado, caracterização estrutural e espectroscópia de nanopós de niobato de potássio e neodímio e de suas condições sólidas dopadas em európio

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do agente de união na resistência ao cisalhamento da interface titânio/polímero de vidro

There is little information regarding bond strengths of polyglass to metal alloys. This study evaluated the influence of bonding system on shear bond strength of a composite resin (Artglass/Heraeus Kulzer) to cast titanium (Ti). Twenty metallic structures (4mm in diameter, 5mm thick) of titanium grade I were cast shaped and abraded with 250mm aluminum oxide and separated into two groups. For each group was applied one bonding system (Siloc or Retention Flow) before opaque and dentin polymer superposition. This procedure was managed using teflon matrices. They were manipulated and polymerized according to the manufacturer's recommendations. The samples were stored in distilled water for 24 hours at 37º and thermocycled (5º and 55ºC/500 cycles). Shear bond strength tests were performed by using an Instron Universal testing machine at a crosshead speed of 5mm/min. Results were analyzed statistically with one-way ANOVA (a=0,5) and they indicated that the Retention Flow system was statistically better than Siloc (20.74 MPa and 11.65 MPa , respectively). It was possible to conclude that the bonding agent influenced the adhesion between polymer and cast titanium.