Technological enhancements to optometric clinical tests

A sizeable amount of the testing in eye care, requires either the identification of targets such as letters to assess functional vision, or the subjective evaluation of imagery by an examiner. Computers can render a variety of different targets on their monitors and can be used to store and analyse ophthalmic images. However, existing computing hardware tends to be large, screen resolutions are often too low, and objective assessments of ophthalmic images unreliable. Recent advances in mobile computing hardware and computer-vision systems can be used to enhance clinical testing in optometry. High resolution touch screens embedded in mobile devices, can render targets at a wide variety of distances and can be used to record and respond to patient responses, automating testing methods. This has opened up new opportunities in computerised near vision testing. Equally, new image processing techniques can be used to increase the validity and reliability of objective computer vision systems. Three novel apps for assessing reading speed, contrast sensitivity and amplitude of accommodation were created by the author to demonstrate the potential of mobile computing to enhance clinical measurement. The reading speed app could present sentences effectively, control illumination and automate the testing procedure for reading speed assessment. Meanwhile the contrast sensitivity app made use of a bit stealing technique and swept frequency target, to rapidly assess a patient’s full contrast sensitivity function at both near and far distances. Finally, customised electronic hardware was created and interfaced to an app on a smartphone device to allow free space amplitude of accommodation measurement. A new geometrical model of the tear film and a ray tracing simulation of a Placido disc topographer were produced to provide insights on the effect of tear film breakdown on ophthalmic images. Furthermore, a new computer vision system, that used a novel eye-lash segmentation technique, was created to demonstrate the potential of computer vision systems for the clinical assessment of tear stability. Studies undertaken by the author to assess the validity and repeatability of the novel apps, found that their repeatability was comparable to, or better, than existing clinical methods for reading speed and contrast sensitivity assessment. Furthermore, the apps offered reduced examination times in comparison to their paper based equivalents. The reading speed and amplitude of accommodation apps correlated highly with existing methods of assessment supporting their validity. Their still remains questions over the validity of using a swept frequency sine-wave target to assess patient’s contrast sensitivity functions as no clinical test provides the range of spatial frequencies and contrasts, nor equivalent assessment at distance and near. A validation study of the new computer vision system found that the authors tear metric correlated better with existing subjective measures of tear film stability than those of a competing computer-vision system. However, repeatability was poor in comparison to the subjective measures due to eye lash interference. The new mobile apps, computer vision system, and studies outlined in this thesis provide further insight into the potential of applying mobile and image processing technology to enhance clinical testing by eye care professionals.

The Automation of Adaptive Processes in the System of Distance Education and Knowledge Control

The article reveals a new technological approach to the creation of adaptive systems of distance learning and knowledge control. The use of the given technology helps to automate the learning process with the help of adaptive system. Developed with the help of the quantum approach of knowledge setting, a programming module-controller guarantees the support of students’ attention and the adaptation of the object language, and this helps to provide the effective interaction between learners and the learning system and to reach good results in the intensification of learning process.

Experiences on Application Generators

The National Institute for Statistics is the organism responsible for acquiring economical data for governmental statistics purposes. Lisbon agreements establish a framework in which this acquisition process shall be available through Internet, so each survey should be considered as a little software project to be developed and maintained. Considering the great amount of different surveys and all changes produced per year on each make impossible this task. An application generator has been developed to automate this task, taking as a start point the Word or PDF template of a survey, and going through a graphical form designer as all human effort, all HTML, Java classes and Oracle database resources are generated and sent from backoffice to frontoffice servers, reducing the team to carry out the whole set of electronic surveys to two people from non I.T. staff.

Towartds Computer-aided Editing of Scientific and Technical Texts

The paper discusses facilities of computer systems for editing scientific and technical texts, which partially automate functions of human editor and thus help the writer to improve text quality. Two experimental systems LINAR and CONUT developed in 90s to control the quality of Russian scientific and technical texts are briefly described; and general principles for designing more powerful editing systems are pointed out. Features of an editing system being now under development are outlined, primarily the underlying linguistic knowledge base and procedures controlling the text.

Cultural Knowledge for Named Entity Disambiguation: A Graph-Based Semantic Relatedness Approach

One of the ultimate aims of Natural Language Processing is to automate the analysis of the meaning of text. A fundamental step in that direction consists in enabling effective ways to automatically link textual references to their referents, that is, real world objects. The work presented in this paper addresses the problem of attributing a sense to proper names in a given text, i.e., automatically associating words representing Named Entities with their referents. The method for Named Entity Disambiguation proposed here is based on the concept of semantic relatedness, which in this work is obtained via a graph-based model over Wikipedia. We show that, without building the traditional bag of words representation of the text, but instead only considering named entities within the text, the proposed method achieves results competitive with the state-of-the-art on two different datasets.

Supporting knitwear design using case-based reasoning

Knitwear design is a creative activity that is hard to automate using the computer. The production of the associated knitting pattern, however, is repetitive, time-consuming and error-prone, calling for automation. Our objectives are two-fold: To facilitate the design and to ease the burden of calculations and checks in pattern production. We conduct a feasibility study for applying case-based reasoning in knitwear design: We describe appropriate methods and show how they can be implemented. © Cranfield University 2009.

Integrating Moodle with University Information Systems

Report published in the Proceedings of the National Conference on "Education in the Information Society", Plovdiv, May, 2013

Investigating factors influencing local government decision makers while adopting integration technologies (IntTech)

The emergence of innovative and revolutionary Integration Technologies (IntTech) has highly influenced the local government authorities (LGAs) in their decision-making process. LGAs that plan to adopt such IntTech may consider this as a serious investment. Advocates, however, claim that such IntTech have emerged to overcome the integration problems at all levels (e.g. data, object and process). With the emergence of electronic government (e-Government), LGAs have turned to IntTech to fully automate and offer their services on-line and integrate their IT infrastructures. While earlier research on the adoption of IntTech has considered several factors (e.g. pressure, technological, support, and financial), inadequate attention and resources have been applied in systematically investigating the individual, decision and organisational context factors, influencing top management's decisions for adopting IntTech in LGAs. It is a highly considered phenomenon that the success of an organisation's operations relies heavily on understanding an individual's attitudes and behaviours, the surrounding context and the type of decisions taken. Based on empirical evidence gathered through two intensive case studies, this paper attempts to investigate the factors that influence decision makers while adopting IntTech. The findings illustrate two different doctrines - one inclined and receptive towards taking risky decisions, the other disinclined. Several underlying rationales can be attributed to such mind-sets in LGAs. The authors aim to contribute to the body of knowledge by exploring the factors influencing top management's decision-making process while adopting IntTech vital for facilitating LGAs' operational reforms.

Design of an automated book reader as an assistive technology tool for blind persons

This dissertation introduces a novel automated book reader as an assistive technology tool for persons with blindness. The literature shows extensive work in the area of optical character recognition, but the current methodologies available for the automated reading of books or bound volumes remain inadequate and are severely constrained during document scanning or image acquisition processes. The goal of the book reader design is to automate and simplify the task of reading a book while providing a user-friendly environment with a realistic but affordable system design. This design responds to the main concerns of (a) providing a method of image acquisition that maintains the integrity of the source (b) overcoming optical character recognition errors created by inherent imaging issues such as curvature effects and barrel distortion, and (c) determining a suitable method for accurate recognition of characters that yields an interface with the ability to read from any open book with a high reading accuracy nearing 98%. This research endeavor focuses in its initial aim on the development of an assistive technology tool to help persons with blindness in the reading of books and other bound volumes. But its secondary and broader aim is to also find in this design the perfect platform for the digitization process of bound documentation in line with the mission of the Open Content Alliance (OCA), a nonprofit Alliance at making reading materials available in digital form. The theoretical perspective of this research relates to the mathematical developments that are made in order to resolve both the inherent distortions due to the properties of the camera lens and the anticipated distortions of the changing page curvature as one leafs through the book. This is evidenced by the significant increase of the recognition rate of characters and a high accuracy read-out through text to speech processing. This reasonably priced interface with its high performance results and its compatibility to any computer or laptop through universal serial bus connectors extends greatly the prospects for universal accessibility to documentation.

Généalogie et pratique de médias liés à l'usage du Cosmos : du gnomon à l'astrolabe

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Development and Testing of An Automatic Lung IMRT Planning Algorithm

Knowledge-based radiation treatment is an emerging concept in radiotherapy. It

mainly refers to the technique that can guide or automate treatment planning in

clinic by learning from prior knowledge. Dierent models are developed to realize

it, one of which is proposed by Yuan et al. at Duke for lung IMRT planning. This

model can automatically determine both beam conguration and optimization ob-

jectives with non-coplanar beams based on patient-specic anatomical information.

Although plans automatically generated by this model demonstrate equivalent or

better dosimetric quality compared to clinical approved plans, its validity and gener-

ality are limited due to the empirical assignment to a coecient called angle spread

constraint dened in the beam eciency index used for beam ranking. To eliminate

these limitations, a systematic study on this coecient is needed to acquire evidences

for its optimal value.

To achieve this purpose, eleven lung cancer patients with complex tumor shape

with non-coplanar beams adopted in clinical approved plans were retrospectively

studied in the frame of the automatic lung IMRT treatment algorithm. The primary

and boost plans used in three patients were treated as dierent cases due to the

dierent target size and shape. A total of 14 lung cases, thus, were re-planned using

the knowledge-based automatic lung IMRT planning algorithm by varying angle

spread constraint from 0 to 1 with increment of 0.2. A modied beam angle eciency

index used for navigate the beam selection was adopted. Great eorts were made to assure the quality of plans associated to every angle spread constraint as good

as possible. Important dosimetric parameters for PTV and OARs, quantitatively

re

ecting the plan quality, were extracted from the DVHs and analyzed as a function

of angle spread constraint for each case. Comparisons of these parameters between

clinical plans and model-based plans were evaluated by two-sampled Students t-tests,

and regression analysis on a composite index built on the percentage errors between

dosimetric parameters in the model-based plans and those in the clinical plans as a

function of angle spread constraint was performed.

Results show that model-based plans generally have equivalent or better quality

than clinical approved plans, qualitatively and quantitatively. All dosimetric param-

eters except those for lungs in the automatically generated plans are statistically

better or comparable to those in the clinical plans. On average, more than 15% re-

duction on conformity index and homogeneity index for PTV and V40, V60 for heart

while an 8% and 3% increase on V5, V20 for lungs, respectively, are observed. The

intra-plan comparison among model-based plans demonstrates that plan quality does

not change much with angle spread constraint larger than 0.4. Further examination

on the variation curve of the composite index as a function of angle spread constraint

shows that 0.6 is the optimal value that can result in statistically the best achievable

plans.

Généalogie et pratique de médias liés à l'usage du Cosmos : du gnomon à l'astrolabe

Mémoire numérisé par la Direction des bibliothèques de l'Université de Montréal.

Adding Run-Time Monitoring to UML-RT by Modifying the Papyrus-RT Code Generator

In Model-Driven Engineering (MDE), the developer creates a model using a language such as Unified Modeling Language (UML) or UML for Real-Time (UML-RT) and uses tools such as Papyrus or Papyrus-RT that generate code for them based on the model they create. Tracing allows developers to get insights such as which events occur and timing information into their own application as it runs. We try to add monitoring capabilities using Linux Trace Toolkit: next generation (LTTng) to models created in UML-RT using Papyrus-RT. The implementation requires changing the code generator to add tracing statements for the events that the user wants to monitor to the generated code. We also change the makefile to automate the build process and we create an Extensible Markup Language (XML) file that allows developers to view their traces visually using Trace Compass, an Eclipse-based trace viewing tool. Finally, we validate our results using three models we create and trace.

Värdeflödesanalys och Data Envelopment Analysis : En fallstudie för att värdera effektiviteten hos ett logistikföretag

Companies face new challenges almost every day. In order to stay competitive, it is important that companies strive for continuous development and improvement. By describing companies through their processes it is possible to get a clear overview of the entire operation, which can contribute, to a well-established overall understanding of the company. This is a case study based on Stort AB which is a small logistics company specialized in international transportation and logistics solutions. The purpose of this study is to perform value stream mapping in order to create a more efficient production process and propose possible improvements in order to reduce processing time. After performing value stream mapping, data envelopment analysis is used to calculate how lean Stort AB is today and how lean the company can become by implementing the proposed improvements. The results show that the production process can improve efficiency by minimizing waste produced by a bad workplace layout and over-processing. The authors suggested solution is to introduce standardized processes and invest in technical instruments in order to automate the process to reduce process time. According to data envelopment analysis the business is 41 percent lean at present and may soon become 55 percent lean and finally reach an optimum 100 percent lean mode if the process is automated.

Document Management System: Strategic Plan, 1996

This Strategic Plan provides the Iowa Department of Transportation with guidelines for defining the acquisition and implementation of a document management system to automate current manual methods of document handling and distribution. In preparation for the production of the Strategic Plan, the USI Team conducted a series of user interviews at the DOT Ames and East Central Iowa Transportation Region facilities, and reviewed various documents relating to day-to-day operations.