Analysis of PCBs in soils and sediments by microwave-assisted extraction, headspace-SPME and high resolution gas chromatography with ion-trap tandem mass spectrometry

A procedure for the determination of seven indicator PCBs in soils and sediments using microwave-assisted extraction (MAE) and headspace solid-phase microextraction (HS-SPME) prior to GC-MS/MS is described. Optimization of the HS-SPME was carried out for the most important parameters such as extraction time, sample volume and temperature. The adopted methodology has reduced consumption of organic solvents and analysis runtime. Under the optimized conditions, the method detection limit ranged from 0.6 to 1 ng/g when 5 g of sample was extracted, the precision on real samples ranged from 4 to 21% and the recovery from 69 to 104%. The proposed method, which included the analysis of a certified reference material in its validation procedure, can be extended to several other PCBs and used in the monitoring of soil or sediments for the presence of PCBs.

Agar extraction from integrated multitrophic aquacultured Gracilaria vermiculophylla: Evaluation of a microwave-assisted process using response surface methodology

Microwave-assisted extraction (MAE) of agar from Gracilaria vermiculophylla, produced in an integrated multitrophic aquaculture (IMTA) system, from Ria de Aveiro (northwestern Portugal), was tested and optimized using response surface methodology. The influence of the MAE operational parameters (extraction time, temperature, solvent volume and stirring speed) on the physical and chemical properties of agar (yield, gel strength, gelling and melting temperatures, as well as, sulphate and 3,6-anhydro-Lgalactose contents) was evaluated in a 2^4 orthogonal composite design. The quality of the extracted agar compared favorably with the attained using traditional extraction (2 h at 85ºC) while reducing drastically extraction time, solvent consumption and waste disposal requirements. Agar MAE optimum results were: an yield of 14.4 ± 0.4%, a gel strength of 1331 ± 51 g/cm2, 40.7 ± 0.2 _C gelling temperature, 93.1 ± 0.5ºC melting temperature, 1.73 ± 0.13% sulfate content and 39.4 ± 0.3% 3,6-anhydro-L-galactose content. Furthermore, this study suggests the feasibility of the exploitation of G. vermiculophylla grew in IMTA systems for agar production.

Maltol determination in food by microwave assisted extraction and electrochemical detection

An electrochemical method is proposed for the determination of maltol in food. Microwave-assisted extraction procedures were developed to assist sample pre-treating steps. Experiments carried out in cyclic voltammetry showed an irreversible and adsorption controlled reduction of maltol. A cathodic peak was observed at -1.0 V for a Hanging Mercury Drop Electrode versus an AgCl/Ag (in saturated KCl), and the peak potential was pH independent. Square wave voltammetric procedures were selected to plot calibration curves. These procedures were carried out with the optimum conditions: pH 6.5; frequency 50 Hz; deposition potential 0.6 V; and deposition time 10 s. A linear behaviour was observed within 5.0 × 10-8 and 3.5 × 10-7 M. The proposed method was applied to the analysis of cakes, and results were compared with those obtained by an independent method. The voltammetric procedure was proven suitable for the analysis of cakes and provided environmental and economical advantages, including reduced toxicity and volume of effluents and decreased consumption of reagents.

Determination of ochratoxin A in bread: evaluation of microwave-assisted extraction using an orthogonal composite design coupled with response surface methodology

An analytical method using microwave-assisted extraction (MAE) and liquid chromatography (LC) with fluorescence detection (FD) for the determination of ochratoxin A (OTA) in bread samples is described. A 24 orthogonal composite design coupled with response surface methodology was used to study the influence of MAE parameters (extraction time, temperature, solvent volume, and stirring speed) in order to maximize OTA recovery. The optimized MAE conditions were the following: 25 mL of acetonitrile, 10 min of extraction, at 80 °C, and maximum stirring speed. Validation of the overall methodology was performed by spiking assays at five levels (0.1–3.00 ng/g). The quantification limit was 0.005 ng/g. The established method was then applied to 64 bread samples (wheat, maize, and wheat/maize bread) collected in Oporto region (Northern Portugal). OTAwas detected in 84 % of the samples with a maximum value of 2.87 ng/g below the European maximum limit established for OTA in cereal products of 3 ng/g.

Inter-application redundancy elimination in sensor networks with compiler-assisted scheduling

Most current-generation Wireless Sensor Network (WSN) nodes are equipped with multiple sensors of various types, and therefore support for multi-tasking and multiple concurrent applications is becoming increasingly common. This trend has been fostering the design of WSNs allowing several concurrent users to deploy applications with dissimilar requirements. In this paper, we extend the advantages of a holistic programming scheme by designing a novel compiler-assisted scheduling approach (called REIS) able to identify and eliminate redundancies across applications. To achieve this useful high-level optimization, we model each user application as a linear sequence of executable instructions. We show how well-known string-matching algorithms such as the Longest Common Subsequence (LCS) and the Shortest Common Super-sequence (SCS) can be used to produce an optimal merged monolithic sequence of the deployed applications that takes into account embedded scheduling information. We show that our approach can help in achieving about 60% average energy savings in processor usage compared to the normal execution of concurrent applications.

Development of biocompatible and “smart” porous structures using CO2-assisted processes

Dissertação apresentada para a obtenção do grau de Doutor em Engenharia Química, especialidade Engenharia da Reacção Química, pela Universidade Nova de Lisboa, Faculdade de Ciências e Tecnologia

Dinuclear Mn (II,II) complexes: magnetic properties and microwave assisted oxidation of alcohols

A series of six new mixed-ligand dinuclear Mn(II, II) complexes of three different hydrazone Schiff bases (H3L1, H3L2 and H3L3), derived from condensation of the aromatic acid hydrazides benzohydrazide, 2-aminobenzohydrazide or 2-hydroxybenzohydrazide, with 2,3-dihydroxy benzaldehyde, respectively, is reported. Reactions of Mn(NO3)(2) center dot 4H(2)O with the H3L1-3 compounds, in the presence of pyridine (1 : 1 : 1 mole ratio), in methanol at room temperature, yield [Mn(H2L1)(py)(H2O)](2)(NO3)(2) center dot 2H(2)O (1 center dot 2H(2)O), [Mn(H2L2)(py)(CH3OH)](2)(NO3)(2) center dot 4H(2)O (2 center dot 4H(2)O) and [Mn(H2L3)(py)(H2O)](2)(NO3)(2) (3) respectively, whereas the use of excess pyridine yields complexes with two axially coordinated pyridine molecules at each Mn(II) centre, viz. [Mn(H2L1)(py)(2)] 2(NO3)(2) center dot H2O (4 center dot H2O), [Mn(H2L2)(py) H-O (6 center dot 2CH(3)OH), respectively. In all the complexes, the (H2L1-3)-ligand coordinates in the keto form. Complexes 1 center dot 2H(2)O, 2 center dot 4H(2)O, 4 center dot H2O, 5 center dot 2H(2)O and 6 center dot 2CH(3)OH are characterized by single crystal X-ray diffraction analysis. The complexes 1, 2 and 6, having different coordination environments, have been selected for variable temperature magnetic susceptibility measurements to examine the nature of magnetic interaction between magnetically coupled Mn(II) centres and also for exploration of the catalytic activity towards microwave assisted oxidation of alcohols. A yield of 81% (acetophenone) is obtained using a maximum of 0.4% molar ratio of catalyst relative to the substrate in the presence of TEMPO and in aqueous basic solution, under mild conditions.

Microwave-assisted and solvent-free peroxidative oxidation of 1-phenylethanol to acetophenone with a CuII-TEMPO catalytic system

The water-soluble copper(II) complex [Cu(H2R)(HL)]center dot H2O (1) was prepared by reaction of copper(II) nitrate hydrate with (E)-2-(((1-hydroxynaphthalen-2-yl)methylene)amino) benzenesulfonic acid (H2L) and diethanolamine (H3R). It was characterized by IR and ESI-MS spectroscopies, elemental and X-ray crystal structural analyses. 1 shows a high catalytic activity for the solvent-free microwave (MW) assisted oxidation of 1-phenylethanol with tert-butylhydroperoxide, leading, in the presence of TEMPO, to yields up to 85% (TON = 850) in a remarkably short reaction time (15 min, with the corresponding TOE value of 3.40 x 10(3) h(-1)) under low power (25W) MW irradiation. Crown Copyright (C) 2014 Published by Elsevier B.V. All rights reserved.

InOx thin films deposited by plasma assisted evaporation: application in light shutters

An integration of undoped InOx and commercial ITO thin films into laboratory assembled light shutter devices is made. Accordingly, undoped transparent conductive InOx thin films, about 100 nm thick, are deposited by radiofrequency plasma enhanced reactive thermal evaporation (rf-PERTE) of indium teardrops with no intentional heating of the glass substrates. The process of deposition occurs at very low deposition rates (0.1-0.3 nm/s) to establish an optimized reaction between the oxygen plasma and the metal vapor. These films show the following main characteristics: transparency of 87% (wavelength, lambda = 632.8 nm) and sheet resistance of 52 Omega/sq; while on commercial ITO films the transparency was of 92% and sheet resistance of 83 Omega/sq. The InOx thin film surface characterized by AFM shows a uniform grain texture with a root mean square surface roughness of Rq similar to 2.276 nm. In contrast, commercial ITO topography is characterized by two regions: one smoother with Rq similar to 0.973 nm and one with big grains (Rq similar to 3.617 nm). For the shutters assembled using commercial ITO, the light transmission coefficient (Tr) reaches the highest value (Tr-max) of 89% and the lowest (Tr-min) of 1.3% [13], while for the InOx shutters these values are 80.1% and 3.2%, respectively. Regarding the electric field required to achieve 90% of the maximum transmission in the ON state (E-on), the one presented by the devices assembled with commercial ITO coated glasses is 2.41 V/mu m while the one presented by the devices assembled with InOx coated glasses is smaller, 1.77 V/mu m. These results corroborate the device quality that depends on the base materials and fabrication process used. (C) 2014 Elsevier Ltd. All rights reserved.

Increase in cases of malaria in Mozambique, 2014: epidemic or new endemic pattern?

ABSTRACT OBJECTIVE To describe the increase in cases of malaria in Mozambique. METHODS Cross-sectional study conducted in 2014, in Mozambique with national weekly epidemiological bulletin data. I analyzed the number of recorded cases in the 2009-2013 period, which led to the creation of an endemic channel using the quartile and C-Sum methods. Monthly incidence rates were calculated for the first half of 2014, making it possible to determine the pattern of endemicity. Months in which the incidence rates exceeded the third quartile or line C-sum were declared as epidemic months. RESULTS The provinces of Nampula, Zambezia, Sofala, and Inhambane accounted for 52.7% of all cases in the first half of 2014. Also during this period, the provinces of Nampula, Sofala and Tete were responsible for 54.9% of the deaths from malaria. The incidence rates of malaria in children, and in all ages, have showed patterns in the epidemic zone. For all ages, the incidence rate has peaked in April (2,573 cases/100,000 inhabitants). CONCLUSIONS The results suggest the occurrence of an epidemic pattern of malaria in the first half of 2014 in Mozambique. It is strategic to have a more accurate surveillance at all levels (central, provincial and district) to target prevention and control interventions in a timely manner.

Acute myocardial infarction in chronic Chagas' cardiomyopathy: report of two cases with no obstructive coronary artery lesions

This report describes two patients with chronic Chagas' Heart Disease who developed clinical and laboratorial signs of myocardial infarction. Both patients presented sudden oppressive chest pain, without precipitating factor. In the first case, the highest MB-CK value was 65 IU, 22 hours after the beginning of the pain. On the second case, it was 77 IU at 18 hours after the beginning of the pain. In both cases ECG changes suggesting non-transmural infarction were present. The 99mTc PYP myocardial scintigram of the first case was positive. Coronary angiograms performed on the 18th and 9th day, respectively, after the acute infarction did not display obstructive lesions. Possible mechanisms causing myocardial infarction with normal coronary arteries in Chagas' Disease may include: embolic event's, particularly when there is associated congestive heart failure; coronary thrombosis and coronary spasms.

Plataforma web de informação automobilística

Esta dissertação enquadra-se no âmbito dos Sistemas de Informação, em concreto, no desenvolvimento de aplicações Web, como é o caso de um website. Com a utilização em larga escala dos meios tecnológicos tem-se verificado um crescimento exponencial dos mesmos, o que se traduz na facilidade com que podem ser encontradas na Internet diversos tipos de plataformas informáticas. Além disso, hoje em dia, uma grande parte das organizações possui o seu próprio sítio na Internet, onde procede à divulgação dos seus serviços e/ou produtos. Pretende-se com esta dissertação explorar estas novas tecnologias, nomeadamente, os diagramas UML - Unified Modeling Language e a concepção de bases de dados, e posteriormente desenvolver um website. Com o desenvolvimento deste website não se propõe a criação de uma nova tecnologia, mas o uso de diversas tecnologias em conjunto com recurso às ferramentas UML. Este encontra-se organizado em três fases principais: análise de requisitos, implementação e desenho das interfaces. Na análise de requisitos efectuou-se o levantamento dos objectivos propostos para o sistema e das necessidades/requisitos necessários à sua implementação, auxiliado essencialmente pelo Diagrama de Use Cases do sistema. Na fase de implementação foram elaborados os arquivos e directórios que formam a arquitectura lógica de acordo com os modelos descritos no Diagrama de Classes e no Diagrama de Entidade-Relação. Os requisitos identificados foram analisados e usados na composição das interfaces e sistema de navegação. Por fim, na fase de desenho das interfaces foram aperfeiçoadas as interfaces desenvolvidas, com base no conceito artístico e criativo do autor. Este aperfeiçoamento vai de encontro ao gosto pessoal e tem como objectivo elaborar uma interface que possa também agradar ao maior número possível de utilizadores. Este pode ser observado na maneira como se encontram distribuídas as ligações (links) entre páginas, nos títulos, nos cabeçalhos, nas cores e animações e no seu design em geral. Para o desenvolvimento do website foram utilizadas diferentes linguagens de programação, nomeadamente a HyperText Markup Language (HTML), a Page Hypertext Preprocessor (PHP) e Javascript. A HTML foi utilizada para a disposição de todo o conteúdo visível das páginas e para definição do layout das mesmas e a PHP para executar pequenos scripts que permitem interagir com as diferentes funcionalidades do site. A linguagem Javascript foi usada para definir o design das páginas e incluir alguns efeitos visuais nas mesmas. Para a construção das páginas que compõem o website foi utilizado o software Macromedia Dreamweaver, o que simplificou a sua implementação pela facilidade com que estas podem ser construídas. Para interacção com o sistema de gestão da base de dados, o MySQL, foi utilizada a aplicação phpMyAdmin, que simplifica o acesso à base de dados, permitindo definir, manipular e consultar os seus dados.

Histological and microbiological aspects of actinomycetoma cases in Venezuela

A ten year (1976-1986) review study of cases of Actinomycetoma in Venezuela was made through personal interview and clinical examinations, analysis of medical records of patients with actinomycetoma, histological studies of biopsy samples, as well as microbiological studies of isolates strain, also through out personal interviews with researchers and dermatologists who were sources of information on mycetoma cases. A total of 47 cases were recorded. As etiologic agent Actinomadura madurae was found in 20 cases - (42.5%), Nocardia brasiliensis in 13 cases (27.6%), Nocardia spp 7 cases (14.8%), Streptomyces somaliensis in 4 cases (8.5%), N. asteroides in 2 cases (4.2%) and N. otitidis caviarum, (N. caviae) in 1 case (2.1%). Most of the reported cases involved individuals living and working in rural areas, mostly males who outnumber females 4:1. The patients were 18 to 80 years old. A. madurae was reported as the most frequent etiologic agent. Most of the clinical cases were seen when the disease was well established. Twenty four of the forty seven cases reported were observed in Lara State, which represents a 51.0% of all the cases studied.

Pulmonary cavities colonized by actinomycetes: report of six cases

Six cases of a cavitary pulmonary ball formed by Actinomycetes are reported. They were observed in the state of Bahia, Brazil. All patients complained of cough and hemoptysis and the pathological study showed bronchiectasis and small cavities in the lungs. The lesions contained micro-colonies of Actinomyces, identified by morphology, staining properties and culture in two cases (thioglycolate media). In the six patients the disease was limited to the lungs. In one patient grains were found, within micro-abscesses in the surrounding parenchyma. Probably the invasion occurred due to ulceration of bronchial mucosa that was covered by granulation tissue. The author suggests that as in nocardiosis actinomycosys may have an invasive form, a saprophytic one may and colonize pulmonary cavities.