Geothermal investigations in an area of induced seismic activity, northern São Paulo State, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Influence of simvastatin on bone regeneration of tibial defects and blood cholesterol level in rats

The purpose of this study was to evaluate the effects of simvastatin, by oral or subcutaneous administration, on tibial defects regeneration and blood cholesterol level in rats. A surgical defect was made on the right tibia of 40 male animals assigned to 4 groups (n=10), based on two routes of administration and on the use or not of simvastatin: subcutaneous injection of simvastatin (7 mg/kg) (group AT) or only the vehicle of drug suspension (group AC), above the defect area, for 5 days; and 20 mg/kg of simvastatin macerated on water (group BT) or only water (group BC), orally, daily, during the whole observation period. The animals were sacrificed after 15 or 30 days, when blood samples were analyzed to check plasma cholesterol levels. Tibiae were removed and, after decalcification and routine laboratorial processing, histological and histomorphometrical analyses were carried out. ANOVA was used for statistical analysis at 5% signficance level. The histological and histomorphometrical analyses showed significant differences only between the experimental periods (p<0.05). Animals sacrificed after 30 days showed better bone repair (p<0.05). There was no statistically significant difference (p>0.05) for blood cholesterol levels between the groups. In conclusion, simvastatin administration either orally or subcutaneously did not improve bone repair of experimental tibial defects and did not alter blood cholesterol levels in rats.

Measurement of sealant surface area by clinical/computerized analysis: 11-year results.

OBJECTIVE: To analyze the clinical behavior of 2 pit and fissure sealants through clinical/computerized evaluation. METHOD AND MATERIALS: Occlusal sealants were placed on maxillary and mandibular first and second premolars according to a split-mouth design. All premolars were sealed with either Concise (3M Espe) or Prisma Shield (Caulk/Dentsply) sealant agents. A hematoxylin-based staining solution was applied on the occlusal surface 7 days, 18 months, 36 months, and 11 years after occlusal sealing to allow checking of the sealant material on the surface. At each analysis time all occlusal surfaces were photographed, and the photographs corresponding to each time period were analyzed with SigmaScan 4.0 Software. The alterations of the sealed area of each sealant were analyzed with the software and recorded. Next, the measurements of the areas were tabulated and analyzed according to each period. Analysis of variance (ANOVA), with parts subdivided into time, and the t test, with a significance level of 5%, were used. RESULTS: The greatest sealed area was maintained by the sealant Concise. However, over the course of 11 years, all sealants began to show the same level of alteration in sealed area. CONCLUSION: The sealing materials showed alteration in sealed area over time, but they were efficient in controlling caries lesion formation on premolar pits and fissures.

Using remote lab networks to provide support to public secondary school education level

The advantages of networking are widely known in many areas (from business to personal ones). One particular area where networks have also proved their benefits is education. Taking the secondary school education level into account, some successful cases can be found in literature. In this paper we describe a particular remote lab network supporting physical experiments accessible to students of institutions geographically separated. The network architecture and application examples of using some of the available remote experiments are illustrated in detail. ©2008 IEEE.

Macroeconomic policies in times of crisis: options and perspectives

Includes bibliography

Education and the labour market in Latin America: why measurement is important and what it tells us about policies, reforms and performance

Includes bibliography

Flexible labour markets, workers' protection and active labour market policies in the Caribbean

Includes bibliography

Remote Sensing Detection of atmospheric pollutants using Lidar, Sodar and correlation with air quality data in an industrial area

Optical remote sensing techniques have obvious advantages for monitoring gas and aerosol emissions, since they enable the operation over large distances, far from hostile environments, and fast processing of the measured signal. In this study two remote sensing devices, namely a Lidar (Light Detection and Ranging) for monitoring the vertical profile of backscattered light intensity, and a Sodar (Acoustic Radar, Sound Detection and Ranging) for monitoring the vertical profile of the wind vector were operated during specific periods. The acquired data were processed and compared with data of air quality obtained from ground level monitoring stations, in order to verify the possibility of using the remote sensing techniques to monitor industrial emissions. The campaigns were carried out in the area of the Environmental Research Center (Cepema) of the University of São Paulo, in the city of Cubatão, Brazil, a large industrial site, where numerous different industries are located, including an oil refinery, a steel plant, as well as fertilizer, cement and chemical/petrochemical plants. The local environmental problems caused by the industrial activities are aggravated by the climate and topography of the site, unfavorable to pollutant dispersion. Results of a campaign are presented for a 24- hour period, showing data of a Lidar, an air quality monitoring station and a Sodar. © 2011 SPIE.

Asymmetries and cooperation in the Free Trade Area of the Americas

Includes bibliography

Finding best urban routes based on analyses of high level and IOPT Petri net models

This paper presents a tool that combines two kinds of Petri Net analyses to set the fastest routes to one vehicle in a bounded area of traffic urban. The first analysis consists of the discovery of possible routes in a state space generated from an IOPT Petri net model given the initial marking as the vehicle position. The second analysis receives the routes found in the first analysis and calculates the state equations at incidence matrix created from the High Level Petri net model to define the fastest route for each vehicle that arrive in the roads. It was considered the exchange of information between vehicle and infrastructure (V2I) to get the position and speed of all vehicles and support the analyses. With the results obtained we conclude that is possible optimizing the urban traffic flow if this tool is applied to all vehicles in a bounded urban traffic. © 2012 IEEE.

Low-level laser therapy in pediatric bell's palsy: Case report in a three-year-old child

Objectives: The objective of this study was to apply low-level laser therapy (LLLT) to accelerate the recovery process of a child patient with Bell's palsy (BP). Design: This was a prospective study. Subject: The subject was a three-year-old boy with a sudden onset of facial asymmetry due to an unknown cause. Materials and methods: The low-level laser source used was a gallium aluminum arsenide semiconductor diode laser device (660 nm and 780 nm). No steroids or other medications were given to the child. The laser beam with a 0.04-cm2 spot area, and an aperture with approximately 1-mm diameter, was applied in a continuous emission mode in direct contact with the facial area. The duration of a laser session was between 15 and 30 minutes, depending on the chosen points and the area being treated. Light was applied 10 seconds per point on a maximum number of 80 points, when the entire affected (right) side of the face was irradiated, based on the small laser beam spot size. According to the acupuncture literature, this treatment could also be carried out using 10-20 Chinese acupuncture points, located unilaterally on the face. In this case study, more points were used because the entire affected side of the face (a large area) was irradiated instead of using acupuncture points. Outcome measures: The House-Brackmann grading system was used to monitor the evolution of facial nerve motor function. Photographs were taken after every session, always using the same camera and the same magnitude. The three-year-old boy recovered completely from BP after 11 sessions of LLLT. There were 4 sessions a week for the first 2 weeks, and the total treatment time was 3 weeks. Results: The result of this study was the improvement of facial movement and facial symmetry, with complete reestablishment to normality. Conclusions: LLLT may be an alternative to speed up facial normality in pediatric BP. © Copyright 2013, Mary Ann Liebert, Inc. 2013.

Bone marrow aspirate combined with low-level laser therapy: A new therapeutic approach to enhance bone healing

This study evaluated the influence of bone marrow aspirate (BMA), low-level laser therapy (LLLT) and their combination on bone healing in surgically created critical-size defects (CSDs) in rat calvaria. 40 rats were divided into four groups: C (control), BMA, LLLT and BMA/LLLT. A 5 mm diameter CSD was created in the calvarium of each animal. In Group C, the defect was filled by blood clot only. In Group BMA, the defect was filled with BMA. In groups LLLT and BMA/LLLT, the defect received laser irradiation (InGaAlP laser), was filled with blood clot or BMA respectively, and irradiated again. Animals were euthanized 30 days postoperatively. Histomorphometric and immunohistochemical analyses were performed. Newly formed bone area (NFBA) was calculated as percentage of the total area of the original defect. Proliferating cell nuclear antigen (PCNA), runt-related transcription factor 2 (Runx2) and osteocalcin (OCN) immunohistochemical staining were performed. PCNA-positive, Runx2-positive and OCN-positive cells were quantified. Data were statistically analyzed. Group BMA/LLLT had significantly greater NFBA than groups C, BMA or LLLT. Group BMA presented significantly greater NFBA than control, while group LLLT did not. Group BMA/LLLT presented a significantly higher number of PCNA-positive and OCN-positive cells than any of the other groups. Groups BMA/LLLT and BMA showed a significantly lower number of Runx2-positive cells than groups C or LLLT. The combination of BMA/LLLT yielded significantly greater bone formation in surgically created CSD in rat calvaria when compared to control, or either treatment alone. © 2013 Elsevier B.V. All rights reserved.

Distribuição de lei de potência gradualmente truncada aplicada na educação: vestibular da Academia da Força Aérea

Pós-graduação em Física - IGCE

The employment situation in Latin America and the Caribbean: Recovery of employment: towards a sustainable model

The adverse effects on Latin America and the Caribbean of the global economic and financial crisis, the worst since the 1930s, have been considerably less than was once feared. Although a run of growth was cut short in 2009 and regional output shrank by 1.9%, the impact of the crisis was limited by the application of countercyclical fiscal and monetary policies by many of the region’s governments. The recovery in the economies, particularly in South America, has gone hand-in-hand with the rapid resurgence of the emerging economies of Asia, with all the favourable consequences this has had for global trade. A similar pattern may be observed regarding the impact of the crisis on labour markets in Latin America and the Caribbean. Although millions of people lost their jobs or had to trade down to lower-quality work, levels of employment (including formal employment) fell by less than originally foreseen. At the same time, real wages rose slightly in a context of falling inflation. The labour market thus stabilized domestic demand, and this contributed to the recovery that began in many countries in late 2009. Improved international trade and financing conditions, and the pick-up in domestic demand driven by macroeconomic policies, have led different commentators to estimate growth in the region’s economy at some 6% in 2010. As detailed in the first part of this edition of the Bulletin, the upturn has been manifested at the regional level by the creation of formal employment, a rise in the employment rate, a decline in joblessness and a moderate increase in real wages. Specifically, it is estimatedthat the regional unemployment rate will have dropped by 0.6 percentage points, from 8.1% in 2009 to 7.5% in 2010. The performance of different countries and subregions has been very uneven, however. On the one hand, there is Brazil, where high economic growth has been accompanied by vigorous creation of formal jobs and the unemployment rate has dropped to levels not seen in a long time. Other countries in South America have benefited from strong demand for natural resources from the Asian countries. Combined with higher domestic demand, this has raised their economic growth rates and had a positive impact on employment indicators. On the other hand, the recovery is still very weak in certain countries and subregions, particularly in the Caribbean, with employment indicators continuing to worsen.Thus, the recovery in the region’s economy in 2010 may be characterized as dynamic but uneven. Growth estimates for 2011 are less favourable. The risks associated with the imbalances in the world economy and the withdrawal of countercyclical fiscal packages are likely to cause the region to grow more slowly in 2011. Accordingly, a small further reduction of between 0.2 and 0.4 percentage points in the unemployment rate is projected for 2011. However, these indicators of recovery do not guarantee growth with decent work in the long term. To bolster the improvement in labour market indicators and generate more productive employment and decent work, the region’s countries need to strengthen their macroeconomic policies, improve regional and global policy coordination, identify and remove bottlenecks in the labour market itself and enhance instruments designed to promote greater equality. Like the rest of the world, the Latin American and Caribbean region is also confronted with the challenge of transforming the way it produces so that its economies can develop along tracks that are sustainable in the long term. Climate change and the consequent challenge of developing and strengthening low-carbon production and consumption patterns will also affect the way people work. A great challenge ahead is to create green jobs that combine decent work with environmentally sustainable production patterns. From this perspective, the second part of this Bulletin discusses the green jobs approach, offering some information on the challenges and opportunities involved in moving towards a sustainable economy in the region and presenting a set of options for addressing environmental issues and the repercussions of climate change in the world of work. Although the debate about the green jobs concept is fairly new in the region, examples already exist and a number of countries have moved ahead with the application of policies and programmes in this area. Costa Rica has formulated a National Climate Change Strategy, for example, whose foremost achievements include professional training in natural-resource management. In Brazil, fuel production from biomass has increased and social housing with solar panelling is being built. A number of other countries in the region are making progress in areas such as ecotourism, sustainable agriculture and infrastructure for climate change adaptation, and in formalizing the work of people who recycle household waste. The shift towards a more environmentally sustainable economy may cause jobs to be destroyed in some economic sectors and created in others. The working world will inevitably undergo major changes. If the issue is approached by way of social dialogue and appropriate public policies, there is a chance to use this shift to create more decent jobs, thereby contributing to growth in the economy, the construction of higher levels of equality and protection for the environment.

Avaliação da via aérea do paciente obeso para predição da dificuldade de intubação traqueal: efeito da manipulação laríngea

Pós-graduação em Anestesiologia - FMB