The effect of lysobisphosphatidic acid (LBPA) on α-tocopherol transfer protein (α-TTP) binding to lipid membranes

The a-tocopherol transfer protein (a-TTP) is responsible for the retention of the atocopherol form of vitamin E in living organisms. The detailed ligand transfer mechanism by a-TTP is still yet to be fully elucidated. To date, studies show that a-TTP transfers a-tocopherol from late endosomes in liver cells to the plasma membrane where it is repackaged into very low density lipoprotein (VLDL) and released into the circulation. Late endosomes have been shown to contain a lipid known as lysobisphosphatidic acid (LBP A) that is unique to this cellular compartment. LBPA plays a role in intracellular trafficking and controlling membrane curvature. Taking these observations into account plus the fact that certain proteins are recruited to membranes based on membrane curvature, the specific aim of this project was to examine the effect of LBP A on a-TTP binding to lipid membranes. To achieve this objective, dual polarization interferometry (DPI) and a vesicle binding assay were employed. Whilst DPI allows protein binding affinity to be measured on a flat lipid surface, the vesicle binding assay determines protein binding affinity to lipid vesicles mimicking curved membranes. DPI analysis revealed that the amount of a-TTP bound to lipid membranes is higher when LBPA is present. Using the vesicle binding assay, a similar result was seen where a greater amount of protein is bound to large unilamellar vesicles (LUV s) containing LBP A. However, the effect of LBP A was attenuated when small unilamellar vesicles (SUVs) were replaced with LUVs. The outcome of this project suggests that aTTP binding to membranes is influenced by membrane curvature, which in turn is induced by the presence of LBP A.

Caractérisation du co-transporteur Na+/myo-inositol SMIT2 dans les membranes en bordure en brosse de rein de lapin et d’intestin de rat

Le myo-inositol (MI) est un soluté organique impliqué dans diverses fonctions physiologiques de la cellule dont la signalisation cellulaire. Il est également un osmolyte compatible reconnu. Trois co-transporteurs de type actif secondaire responsables de son absorption ont été identifiés. Deux d’entre eux sont couplés au transport du sodium (SMIT1 et SMIT2) et le troisième est couplé au transport de protons (HMIT). L’objectif de cette étude a été la caractérisation du transport du MI par SMIT2 dans des membranes en bordure en brosse (BBMv) issues du rein de lapin et de l’intestin de rat ainsi qu’après expression dans les ovocytes de Xenopus laevis. La quantification de l’ARNm de SMIT1 et de SMIT2 dans le rein nous a appris que SMIT1 est majoritairement présent dans la médullaire alors que SMIT2 est principalement localisé dans le cortex. Ces résultats ont été confirmés par immunobuvardage en utilisant un anticorps dirigé contre SMIT2. Grâce à l’inhibition sélective de SMIT1 par le L-Fucose et de SMIT2 par le D-chiro-inositol (DCI), nous avons démontré que SMIT2 semble le seul responsable du transport luminal de MI dans le tubule contourné proximal avec un Km de 57 ± 14 µM. Pour ce qui est de l’intestin, des études de transport de MI radioactif ont démontré une absence de transport de MI chez le lapin alors que l’intestin de rat présente un transport de MI très actif. Une quantification par qRT-PCR nous a permis de constater que l’intestin de lapin ne semble pas posséder les transporteurs de MI nécessaires. Comme pour le rein, SMIT2 semble le seul transporteur de MI présent au niveau du pôle apical des entérocytes intestinaux chez le rat. Il est chargé du prélèvement du MI de l'alimentation avec un Km de 150 ± 40 µM. Les analyses fonctionnelles exécutées sur SMIT2 de rat en électrophysiologie après expression dans les ovocytes de Xenopus laevis donnent sensiblement les mêmes résultats que pour les BBMv de rein de lapin et d’intestin de rat. Dans les ovocytes, SMIT2 présente une grande affinité pour le MI (270 ± 19 µM) et le DCI (310 ± 60 µM) et aucune affinité pour le L-fucose. Il est ii également très sensible à la phlorizine (16 ± 7 µM). Une seule exception persiste : la constante d’affinité pour le glucose dans les BBMv d’intestin de rat est 40 fois plus petite que celle observée sur les ovocytes de Xenopus laevis. Nous avons également testé la capacité de certains transporteurs de sucre présents à la surface des membranes apicales des entérocytes à prélever le MI. Vu que l'inhibition de ces transporteurs (SGLT1 et GLUT5) ne changeait rien au taux de MI radioactif transporté, nous en avons conclu qu'ils ne sont pas impliqués dans son transport. Finalement, l’efflux de MI à partir du pôle basolatéral des entérocytes n’est pas effectué par GLUT2 puisque ce dernier lorsqu'il est exprimé dans des ovocytes, est incapable de transporter le MI.

Caractérisation de l'activité biologique de l'entérotoxine STb d'Escherichia coli à l'aide de membranes lipidiques artificielles et de cellules en culture

Thèse numérisée par la Division de la gestion de documents et des archives de l'Université de Montréal

Imagerie par microscopie à force atomique de toxines Cry1 de Bacillus thuringiensis interagissant avec des membranes apicales de l'intestin de Manduca sexta

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Expression du récepteur B1 des kinines dans les membranes synoviales ostéoarthritiques humaines

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Biochemical Investigations on the Stability of Biological Membranes

In this project, an attempt has been made to study the stability of erythrocyte and lysosomal membranes biochemically. Erythrocytes were chosen for the study because of their ready availability and relative simplicity. Biological membranes forming closed boundaries between compartments of varying composition consist mainly of proteins and lipids. They are asymmetric, fluid structures that are thermodynamically stable and metabolically active. Normal cellular function begins with normal membrane structure and any variation in it may upset the normal functions. The degree of fluidity of a membrane depends on the chain length of its lipids and degree of unsaturation of constituent fatty acids. In response to environmental changes, many cells can regulate composition of their membranes to maintain the overall semi fluid environment necessary for many membrane associated functions. The assembly and Maintenance of membrane structures in cells is a dynamic process. The components are not only synthesized and inserted into a growing membrane but are also continuously degraded at a slower rate. This turnover process varies with each individual molecule.Lysosomes are important in the catabolic processes occurring in the cell. Lysosomes contain hydrolytic enzymes and are stable under normal conditions. In certain pathological conditions, the lysosomal membrane may rupture, releasing the hydrolytic enzymes into the cell and digestion of cell takes place as a whole. This is very dangerous. In normal life processes of multi cellular organisms, lysosomes rupture following the death of a cell and it may have some value as a built in mechanism for selfremoval of dead cells.An attempt has also been made in this project towards developing lysosome membrane stability as an index of fish spoilage during storage. Different membranes within the cell and between cells have different compositions as reflected in the ratio of protein to lipid. The difference is not surprising given the very different functions of membranes

Laser-induced thermal characterization of nano Ag metal dispersed ceramic alumina matrix

In this paper, we report the measurements of thermal diffusivity of nano Ag metal dispersed ceramic alumina matrix sintered at different temperatures using laser induced non-destructive photoacoustic technique. Measurements of thermal diffusivity also have been carried out on specimens with various concentration of nano metal. Analysis of the data is done on the basis of one-dimensional model of Rosencwaig and Gersho. The present measurements on the thermal diffusivity of nano metal dispersed ceramic alumina shows that porosity has a great influence on the heat transport and the thermal diffusivity value. The present analysis also shows that the inclusion of nano metal into ceramic matrix increases its interconnectivity and hence the thermal diffusivity value. The present study on the samples sintered at different temperature shows that the porosity of the ceramics varies considerably with the change in sintering temperature. The results are interpreted in terms of phonon assisted heat transfer mechanism and the exclusion of pores with the increase in sintering temperature.

Laser-induced thermal characterization of nano Ag metal dispersed ceramic alumina matrix

In this paper, we report the measurements of thermal diffusivity of nano Ag metal dispersed ceramic alumina matrix sintered at different temperatures using laser induced non-destructive photoacoustic technique. Measurements of thermal diffusivity also have been carried out on specimens with various concentration of nano metal. Analysis of the data is done on the basis of one-dimensional model of Rosencwaig and Gersho. The present measurements on the thermal diffusivity of nano metal dispersed ceramic alumina shows that porosity has a great influence on the heat transport and the thermal diffusivity value. The present analysis also shows that the inclusion of nano metal into ceramic matrix increases its interconnectivity and hence the thermal diffusivity value. The present study on the samples sintered at different temperature shows that the porosity of the ceramics varies considerably with the change in sintering temperature. The results are interpreted in terms of phonon assisted heat transfer mechanism and the exclusion of pores with the increase in sintering temperature

Laser-induced thermal characterization of nano Ag metal dispersed ceramic alumina matrix

In this paper, we report the measurements of thermal diffusivity of nano Ag metal dispersed ceramic alumina matrix sintered at different temperatures using laser induced non-destructive photoacoustic technique. Measurements of thermal diffusivity also have been carried out on specimens with various concentration of nano metal. Analysis of the data is done on the basis of one-dimensional model of Rosencwaig and Gersho. The present measurements on the thermal diffusivity of nano metal dispersed ceramic alumina shows that porosity has a great influence on the heat transport and the thermal diffusivity value. The present analysis also shows that the inclusion of nano metal into ceramic matrix increases its interconnectivity and hence the thermal diffusivity value. The present study on the samples sintered at different temperature shows that the porosity of the ceramics varies considerably with the change in sintering temperature. The results are interpreted in terms of phonon assisted heat transfer mechanism and the exclusion of pores with the increase in sintering temperature

Electron donating properties and catalytic actiVity of cerium oxide and its mixed oxides with alumina

The electron donating properties of Ce02 and its mixed oxides with alumina have been determined from the studies of adsorption of electron acceptors of various electron affinities on the surface of these oxides. The catalytic activity of these oxides towards some reactions such as oxidation of alcohols and reduction of ketones have been Correlated with their surface electrondonor properties. The surface acidity/basicity of these oxides have also been determined by titration method using a set of Hammett indicators.

Basicity and electron donor properties of lanthanum oxide and its mixed oxides with alumina

The electron donating properties of La2O3 activated at 300, 500 and 800·C and its mixed oxides with alumina are reported from the studies on adsorption of electron acceptors of varying electron affinity on La203. The electron acceptors with their electron affinity values given in parenthesis are: 7,7,8,8-tetracyanoquinodimethane (2.84 eV), 2,3,5,6-tetrachloro-I,4-benzoquinone (2.40 eV) and p-dinitrobenzene(l.77eV). The basicity of the oxide has been determined by titration with n-butylamine and Ho.max values are reported. The limit of electron transfer from the oxide to the electron acceptor is between 2.40 and 1.77 eV. It is observed that La203 promotes the surface electron properties of alumina without changing its limit of electron transfer.

Surface electron properties of yttrium oxide supported on alumina

Cochin University of Science and Technology

Acid-base, electron-donating and magnetic properties of Nd2O3 and its mixed oxides with alumina catalysts

The electron donor properties of Nd2O3 activated at 300, 500 and 800°C were investigated through studies on the adsorption of electron acceptors of various electron affinities - 7, 7, 8,8-tetracyanoquinodimethane (2.84 eV). 2, 3, 5, 6-tetrachloro-l , 4-benzoquinone (2.40 eV). p-dinitrobenzene (1.77 eV), and m-dinitrobenzene (1.26 eV) in solvents acetonitrile and 1, 4-dioxan. The extent of electron transfer during adsorption has been found from magnetic measurements and electronic spectral data. The corresponding data on mixed oxides of neodymium and aluminium are reported for various. compositions. The acid-base properties of catalysts were also determined using a set of Hammett indicators.

Surface acidity/basicity of yttria and its mixed oxides with alumina catalysts

Acid/base strength distribution of Y2O3 and its mixed oxides with alumina catalysts are measured on Hammett acidity function scale and expressed in terms of H0max value. Basicity of Y2O3 increases with increase in activation temperature and for mixed oxides the basicity increases with increase in concentration of Y2O3, in the catalyst.