De touch: extending service channels in an airport through touch technologies

This project aimed to create a communication and interaction channel between Madeira Airport and its passengers. We used the pre-existent touch enabled screens at the terminal since their potential was not being utilised to their full capacity. To achieve our goal, we have followed an agile strategy to create a testable prototype and take advantages of its results. The developed prototype is based on a plugin architecture turning it into a maintainable and highly customisable system. The collected usage data suggests that we have achieved the initially defined goals. There is no doubt that this new interaction channel is an improvement regarding the provided services and, supported by the usage data, there is an opportunity to explore additional developments to the channel.

The correlation between thermal comfort in buildings and fashion products

This article is about thermal comfort in the wearable product. The research correlates fashion and architecture, in so far as it elects the brise soleil - an architectural element capable of regulating temperature and ventilation inside buildings - as a study referential, in trying to transpose and adapt its mechanisms to the wearable apparel.

PCM thermal insulation in buildings

This paper presents the results of a numerical and experimental study of phase change material (PCM) filled walls and roofs under real operational conditions to achieve passive thermal comfort. The numerical part of the study was based on a one-dimensional model for the phase change problem controlled by pure conduction. Real radiation data was used to determine the external face temperature. The numerical treatment was based upon using finite difference approximations and the ADI scheme. The results obtained were compared with field measurements. The experimental set-up consisted of a small room with movable roof and side wall. The roof was constructed in the traditional way but with the phase change material enclosed. Thermocouples were distributed across the cross section of the roof. Another roof, identical but without the PCM, was also used during comparative tests. The movable wall was also constructed as is done traditionally but with the PCM enclosed. Again, thermocouples were distributed across the wall thickness to enable measurement of the local temperatures. Another wall, identical but without the PCM, was also used during comparative tests. The PCM used in the numerical and experimental tests was composed of a mixture of two commercial grades of glycol in order to obtain the required fusion temperature range. Comparison between the simulation results and the experiments indicated good agreement. Field tests also indicated that the PCM used was adequate and that the concept was effective in maintaining the indoor temperature very close to the established comfort limits. Further economical analysis indicated that the concept could effectively help in reducing the electric energy consumption and improving the energy demand pattern. © 1997 by John Wiley & Sons, Ltd.

Semi-automatic modeling of buildings from digital surface models

Semi-automatic building detection and extraction is a topic of growing interest due to its potential application in such areas as cadastral information systems, cartographic revision, and GIS. One of the existing strategies for building extraction is to use a digital surface model (DSM) represented by a cloud of known points on a visible surface, and comprising features such as trees or buildings. Conventional surface modeling using stereo-matching techniques has its drawbacks, the most obvious being the effect of building height on perspective, shadows, and occlusions. The laser scanner, a recently developed technological tool, can collect accurate DSMs with high spatial frequency. This paper presents a methodology for semi-automatic modeling of buildings which combines a region-growing algorithm with line-detection methods applied over the DSM.

Airport systems: public service and private initiative

This issue analize the importance of air travel among other forms of transport has greatly increased, offering a viable option for the movement of people and goods.

Evaluation of Cracks Caused by Mechanical Vibrations in Buildings

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Barriers to green buildings at two Brazilian engineering schools

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Regulating Green Buildings

Green buildings are becoming the new fixation for the building industry because of the impact they have on the carbon footprint and the cost savings they offer for utility costs. Governments have begun to produce policies and regulations that implement and mandate green buildings due to these successes. However, the policies are having troubles increasing the popularity and quantities of green buildings. There is a need for a way to produce better policies and regulations that will increase both the amount of green buildings their popularity. A decision-making tool, such as a decision tree, should be created to help policymakers who do not have the backgrounds to produce well thought out regulations. By researching the green building industry and its current status, key points can be graphed out in a decision tool that will provide the needed education for policy makers to produce better green building regulations.

Temporal and Spatial Patterns of Avifauna on Wetlands in the Vicinity of Bush Field Airport, Augusta, Georgia, USA

Responding to a U.S. Federal court order to improve discharged wastewater quality, Augusta, Georgia initiated development of artificial wetlands in 1997 to treat effluents. Because of the proximity to Augusta Regional Airport at Bush Field, the U.S. Federal Aviation Administration expressed concern for potential increased hazard to aircraft posed by birds attracted to these wetlands. We commenced weekly low-level aerial surveys of habitats in the area beginning January, 1998. Over a one-year period, 49 surveys identified approximately 42,000 birds representing 52 species, including protected Wood Storks and Bald Eagles, using wetlands within 8 km of the airport. More birds were observed during the mid-winter and fall/spring migratory seasons (1,048 birds/survey; October - April) than during the breeding/post-breeding seasons (394 birds/survey; May - September). In winter, waterfowl dominated the avian assemblage (65% of all birds). During summer, wading birds were most abundant (56% of all birds). Habitat changes within the artificial wetlands produced fish kills and exposed mudflats, resulting in increased use by wading birds and shorebirds. No aquatic birds were implicated in 1998 bird strikes, and most birds involved could safely be placed within songbird categories. Airport incident reports further implicated songbirds. These findings suggested that efforts to decrease numbers of songbirds on the airport property must be included in the development of a wildlife hazard management plan. Seasonal differences in site use among species groups should also be considered in any such plan. Other wetlands within 8 km of the airport supported as many or more birds than the artificial wetlands. With proper management of the artificial wetlands, it should be possible to successfully displace waterfowl and wading birds to other wetlands further from the airport.

EFFECTS OF A BIRD HAZARD REDUCTION FORCE ON REDUCING BIRD/AIRCRAFT STRIKE HAZARDS AT THE ATLANTIC CITY INTERNATIONAL AIRPORT, NJ

Bird-aircraft strikes at the Atlantic City International Airport (ACY) increased from 18 in 1989 to 37 in 1990. The number of bird-aircraft strikes involving gulls (Larus spp.) during this time rose from 6 to 27, a 350% increase. The predominant species involved in bird strikes was the laughing gull (L. atricilla). Pursuant to an interagency agreement between the U.S. Department of Transportation (USDOT), Federal Aviation Administration (FAA) and the U.S. Department of Agriculture (USDA)l Animal and Plant Health Inspection Service (APHIS)/Animal Damage Control (ADC), ADC established a Emergency/Experimental Bird Hazard Reduction Force (BHFF) at ACY in 1991. An Environmental Assessment (EA) and Finding of No Significant Impact (FONSI) for the 1991 Emergency/Experimental BHRF was executed and signed by the FAA on 19 May 1991. The BHRF was adopted at this time by the FAA Technical Center as an annual program to reduce bird strikes at ACY. The BHRF goals are to minimize or eliminate the incidence of bird-aircraft strikes and runway closures due to increased bird activities. A BHRF team consisting of ADC personnel patrolled ACY for 95 days from 26 May until 28 August 1992, for a total of 2,949 person-hours. The BHRF used a combination of pyrotechnics, amplified gull distress tapes and live ammunition to harass gulls away from the airport from dawn to dusk. Gullaircraft strikes were reduced during BHRF operations in 1992 by 86% compared to gull strikes during summer months of 1990 when there was not a BHRF team. Runway closures due to bird activity decreased 100% compared to 1990 and 1991 closures. The BHRF should continue at ACY as long as birds are a threat to human safety and aircraft operations.

COMPLETE CONTROL OF NUISANCE BIRDS IN AIRPORT HANGARS

Fogging of ReJeX-iT7 TP-40 offers a very efficient method for the control and dispersal of nuisance birds from many diverse areas. The amount of the repellent is greatly reduced over any other control method. The method is direct and is independent of the activity of the birds. The applications with any fogger, thermal or mechanical, that can deliver droplets of less than 20 microns, can be manually or fully automated and pose only minimal risks to operators or animals. All birds that became a nuisance and safety problem in the hangars of TWA and AA at LaGuardia, and TWA warehouse at Newark Airport were successfully driven out by fogging ReJeX-iT7 TP-40 with a Curtis Dyna-Fog AGolden Eagle@ thermal fogger.

Airport Bird Threat in North America from Large Flocking Birds (geese) (as Viewed by an Engine Manufacturer)--Part 1

In worldwide aviation operations, bird collisions with aircraft and ingestions into engine inlets present safety hazards and financial loss through equipment damage, loss of service and disruption to operations. The problem is encountered by all types of aircraft, both military and commercial. Modern aircraft engines have achieved a high level of reliability while manufacturers and users continually strive to further improve the safety record. A major safety concern today includes common-cause events which involve significant power loss on more than one engine. These are externally-inflicted occurrences, with the most frequent being encounters with flocks of birds. Most frequently these encounters occur during flight operations in the area on or near airports, near the ground instead of at cruise altitude conditions. This paper focuses on the increasing threat to aircraft and engines posed by the recorded growth in geese populations in North America. Service data show that goose strikes are increasing, especially in North America, consistent with the growing resident geese populations estimated by the United States Department of Agriculture (USDA). Airport managers, along with the governmental authorities, need to develop a strategy to address this large flocking bird issue. This paper also presents statistics on the overall status of the bird threat for birds of all sizes in North America relative to other geographic regions. Overall, the data shows that Canada and the USA have had marked improvements in controlling the threat from damaging birds - except for the increase in geese strikes. To reduce bird ingestion hazards, more aggressive corrective measures are needed in international air transport to reduce the chances of serious incidents or accidents from bird ingestion encounters. Air transport authorities must continue to take preventative and avoidance actions to counter the threat of birdstrikes to aircraft. The primary objective of this paper is to increase awareness of, and focus attention on, the safety hazards presented by large flocking birds such as geese. In the worst case, multiple engine power loss due to large bird ingestion could result in an off-airport forced landing accident. Hopefully, such awareness will prompt governmental regulatory agencies to address the hazards associated with growing populations of geese in North America.

Wildlife Risk Management at Vancouver International Airport

The Vancouver International Airport (YVR) is the second busiest airport in Canada. YVR is located on Sea Island in the Fraser River Estuary - a world-class wintering and staging area for hundreds of thousands of migratory birds. The Fraser Delta supports Canada’s largest wintering populations of waterfowl, shorebirds, and raptors. The large number of aircraft movements and the presence of many birds near YVR pose a wide range of considerable aviation safety hazards. Until the late 1980s when a full-time Wildlife Control Program (WCP) was initiated, YVR had the highest number of bird strikes of any Canadian commercial airport. Although the risks of bird strikes associated with the operation of YVR are generally well known by airport managers, and a number of risk assessments have been conducted associated with the Sea Island Conservation Area, no quantitative assessment of risks of bird strikes has been conducted for airport operations at YVR. Because the goal of all airports is to operate safely, an airport wildlife management program strives to reduce the risk of bird strikes. A risk assessment establishes the current risk of strikes, which can be used as a benchmark to focus wildlife control activities and to assess the effectiveness of the program in reducing bird strike risks. A quantitative risk assessment also documents the process and information used in assessing risk and allows the assessment to be repeated in the future in order to measure the change in risk over time in an objective and comparative manner. This study was undertaken to comply with new Canadian legislation expected to take effect in 2006 requiring airports in Canada to conduct a risk assessment and develop a wildlife management plan. Although YVR has had a management plan for many years, it took this opportunity to update the plan and conduct a risk assessment.

Equation of Motion Governing the Dynamics of Vertically Collapsing Buildings

The present paper aims at contributing to a discussion, opened by several authors, on the proper equation of motion that governs the vertical collapse of buildings. The most striking and tragic example is that of the World Trade Center Twin Towers, in New York City, about 10 years ago. This is a very complex problem and, besides dynamics, the analysis involves several areas of knowledge in mechanics, such as structural engineering, materials sciences, and thermodynamics, among others. Therefore, the goal of this work is far from claiming to deal with the problem in its completeness, leaving aside discussions about the modeling of the resistive load to collapse, for example. However, the following analysis, restricted to the study of motion, shows that the problem in question holds great similarity to the classic falling-chain problem, very much addressed in a number of different versions as the pioneering one, by von Buquoy or the one by Cayley. Following previous works, a simple single-degree-of-freedom model was readdressed and conceptually discussed. The form of Lagrange's equation, which leads to a proper equation of motion for the collapsing building, is a general and extended dissipative form, which is proper for systems with mass varying explicitly with position. The additional dissipative generalized force term, which was present in the extended form of the Lagrange equation, was shown to be derivable from a Rayleigh-like energy function. DOI: 10.1061/(ASCE)EM.1943-7889.0000453. (C) 2012 American Society of Civil Engineers.