991 resultados para 429
Resumo:
As technology geometries have shrunk to the deep submicron regime, the communication delay and power consumption of global interconnections in high performance Multi- Processor Systems-on-Chip (MPSoCs) are becoming a major bottleneck. The Network-on- Chip (NoC) architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication issues such as performance limitations of long interconnects and integration of large number of Processing Elements (PEs) on a chip. The choice of routing protocol and NoC structure can have a significant impact on performance and power consumption in on-chip networks. In addition, building a high performance, area and energy efficient on-chip network for multicore architectures requires a novel on-chip router allowing a larger network to be integrated on a single die with reduced power consumption. On top of that, network interfaces are employed to decouple computation resources from communication resources, to provide the synchronization between them, and to achieve backward compatibility with existing IP cores. Three adaptive routing algorithms are presented as a part of this thesis. The first presented routing protocol is a congestion-aware adaptive routing algorithm for 2D mesh NoCs which does not support multicast (one-to-many) traffic while the other two protocols are adaptive routing models supporting both unicast (one-to-one) and multicast traffic. A streamlined on-chip router architecture is also presented for avoiding congested areas in 2D mesh NoCs via employing efficient input and output selection. The output selection utilizes an adaptive routing algorithm based on the congestion condition of neighboring routers while the input selection allows packets to be serviced from each input port according to its congestion level. Moreover, in order to increase memory parallelism and bring compatibility with existing IP cores in network-based multiprocessor architectures, adaptive network interface architectures are presented to use multiple SDRAMs which can be accessed simultaneously. In addition, a smart memory controller is integrated in the adaptive network interface to improve the memory utilization and reduce both memory and network latencies. Three Dimensional Integrated Circuits (3D ICs) have been emerging as a viable candidate to achieve better performance and package density as compared to traditional 2D ICs. In addition, combining the benefits of 3D IC and NoC schemes provides a significant performance gain for 3D architectures. In recent years, inter-layer communication across multiple stacked layers (vertical channel) has attracted a lot of interest. In this thesis, a novel adaptive pipeline bus structure is proposed for inter-layer communication to improve the performance by reducing the delay and complexity of traditional bus arbitration. In addition, two mesh-based topologies for 3D architectures are also introduced to mitigate the inter-layer footprint and power dissipation on each layer with a small performance penalty.
Resumo:
Objetivou-se avaliar o efeito da sazonalidade e de soluções nutritivas na produção, sobrevivência, enraizamento e vigor radicial de miniestacas juvenis de Araucaria angustifolia, bem como o hábito de crescimento das mudas formadas. As minicepas foram manejadas em minijardim sob sistema semi-hidropônico, em que foram aplicadas duas soluções nutritivas, com diferentes concentrações de nutrientes, fornecidas por gotejamento, durante as quatro estações do ano. Após 11 coletas, as minicepas apresentaram 100% de sobrevivência. A maior produção ocorreu no verão, com 1.356 miniestacas.m-2.ano-1, e a menor no inverno, com 429 miniestacas.m-2.ano-1. As coletas de inverno apresentaram os melhores resultados de enraizamento, com média de 83% em casa de sombra, contra 31% das demais estações. O maior vigor radicial ocorreu nas coletas de primavera e verão e o menor, no inverno. A solução nutritiva mais concentrada propiciou maior produção de miniestacas e melhor vigor radicial, e todas as mudas resultantes da miniestaquia apresentaram hábito ortotrópico de crescimento. A técnica de miniestaquia com propágulos vegetativos de origem seminal mostrou-se potencial para a produção de mudas de araucária, sendo significativamente influenciada pela época do ano e pelas soluções nutritivas empregadas.
Resumo:
Este trabalho apresenta os resultados de experimento conduzido para avaliar as perdas de carga localizadas em gotejados não coaxiais integrados a tubos de polietileno. As perdas de carga para diferentes vazões foram determinadas em quatro modelos de tubos-gotejadores, com dez repetições. Para cada vazão, a perda de carga localizada foi calculada pela diferença entre a perda de carga no tubo com emissor e a perda de carga contínua no tubo uniforme estimada pela equação de Darcy-Weisbach com o fator de atrito (f) previamente determinado. Aproximações matemáticas foram sugeridas para calcular hfe com base no coeficiente de carga cinética (K) e em um valor constante de comprimento equivalente (Le). Para os modelos de tubos-gotejadores estudados, a perda de carga localizada, expressa como percentagem da perda de carga total, aumentou com o aumento da razão de obstrução, variando de 24,5% a 50,8% para Ag/At = 0,221 e 0,429, respectivamente. A maior diferença percentual encontrada entre a perda de carga total calculada pelo método iterativo passo a passo e pelo uso de "Le" constante, calculado com a vazão de entrada na lateral, foi 5,5% para o gotejador não autocompensante. Para os gotejadores autocompensantes, as diferenças foram inferiores a 1,7%.
Resumo:
1868/06/26 (Numéro 429).
Resumo:
OBJETIVO: Identificar os fatores de risco para o desenvolvimento de metástase à distância (MD) entre pacientes com câncer de cabeça e pescoço cirurgicamente tratados. MÉTODOS: Realizou-se estudo retrospectivo de 253 pacientes entre janeiro de 1997 e dezembro de 2002. Deles, 10 desenvolveram MD durante o seguimento. Foram avaliados: gênero, idade, sítio primário, classificação TNM, nível de doença linfonodal e presença de invasão extracapsular macro ou microscópica. RESULTADOS: A média de sobrevida para pacientes com MD, a partir da finalização do tratamento oncológico, foi de 16 meses (com desvio-padrão de 2,256 meses). A presença de invasão extracapsular macro (risco relativo = 14,429) e microscópica (RR = 17,471) e os estadiamentos patológicos avançados cervical (RR = 4,409) e do tumor primário (RR = 2,929) apresentaram significado estatístico como fatores de risco para MD. CONCLUSÃO: Os fatores de risco para o surgimento de MD foram: invasão extracapsular macro e microscópica, presença de linfonodo positivo à avaliação histopatológica e tumor primário avançado.
Resumo:
Ylä-Savon liikenneturvallisuussuunnitelma laadittiin seudun kuntien sekä Pohjois-Savon ELY-keskuksen yhteistyönä. Suunnitelmassa määriteltiin yhteiset seudulliset liikenneturvallisuuden ja esteettömyyden parantamista koskevat periaatteet. Näiden periaatteiden sekä kuntakohtaisten erityispiirteiden ohjaamina laadittiin tarkemmat kuntakohtaiset liikenneympäristön parantamissuunnitelmat. Suunnitelmassa määriteltiin myös kevyen liikenteen laatukäytävät, jotka ohjaavat erityisesti kevyen liikenteen turvallisuutta ja olosuhteita parantavien toimenpiteiden priorisointia kunnissa. Omana kokonaisuutenaan laadittiin liikenneturvallisuustyön toimintasuunnitelmat kuntien eri hallintokunnille. Liikenneturvallisuusongelmia kartoitettiin alkusyksyn 2010 aikana tehdyillä asukas- ja koululaiskyselyillä, haastatteluilla, vuosina 2005-2009 tapahtuneiden onnettomuuksien analyyseillä sekä maastokäynneillä. Lisäksi käytiin läpi saadut liikenneturvallisuusaloitteet. Liikenneturvallisuusongelmien analysoinnin sekä valtakunnallisten ja Itä-Suomen liikenneturvallisuustavoitteiden pohjalta Ylä-Savon seudulle määritettiin yhteiset määrälliset ja toiminnalliset liikenneturvallisuustavoitteet. Määrälliseksi tavoitteeksi asetettiin, että kenenkään ei tarvitse kuolla tai loukkaantua vakavasti liikenteessä. Pielaveden kuntaan tehtiin toimenpide-esitykset liikenneympäristön parantamiseksi yhteensä 28 kohteeseen. Toimenpiteet painottuvat kirkonkylän taajama-alueelle. Toimenpiteet jaettiin pieniin pikatoimenpiteisiin sekä varsinaisiin liikenneturvallisuustoimenpiteisiin. Lisäksi eroteltiin suuremmat ns. erillishankkeet. Toimenpiteiden toteuttaminen vaiheistettiin pikatoimenpiteiden ohella kolmeen ohjeelliseen kiireellisyysluokkaan; vuosina 2011-2014 ja 2015-2018 sekä vuoden 2019 jälkeen toteutettavat toimenpiteet. Toimenpiteistä on esitetty raportissa lyhyet yleiskuvaukset sekä raportin liitteenä tarkemmat, helposti päivitettävissä olevat toimenpidekartat ja -taulukot. Toteuttamisohjelmaan sisältyvien toimenpiteiden kokonaiskustannukset ovat 2,3 milj. € (sisältäen erillishankkeet). Hallintokuntakohtaiset liikenneturvallisuustyön toimintasuunnitelmat sisältävät liikenneturvallisuuskoulutuksen, -tiedotuksen ja –valistuksen toimenpiteet tuleville vuosille. Toimenpiteitä kohdistetaan kaikille ikäryhmille sisällyttäen liikenneturvallisuustyö kuntien palveluihin ja osaksi hallintokuntien jokapäiväistä työtä. Pielaveden kunnan yhteiseksi liikenneturvallisuustyön teemaksi valittiin ”Vanhempien asenne - esimerkkinä toimiminen”. Liikenneturvallisuussuunnitelman toteuttamista seurataan kunnan liikenneturvallisuustyöryhmässä, jonka kokoonpano tarkistettiin työn aikana. Ryhmään kuuluvat kunnan eri hallintokuntien edustajien lisäksi Liikenneturvan, poliisin ja Pohjois-Savon ELY-keskuksen edustajat.
Resumo:
OBJETIVO: analisar os custos do tratamento cirúrgico de carcinomas cutâneos, realizado em serviço de Cirurgia Plástica de hospital universitário, em pacientes do Sistema Único de Saúde (SUS). MÉTODOS:setenta e um pacientes foram incluídos e registrados seus dados sociodemográficos e da operação. Para análise de custos diretos foi considerado o período de internação do paciente, incluindo custos materiais e humanos. RESULTADOS: o custo material médio por procedimento foi R$.324,70, e o valor médio da taxa de serviço hospitalar, segundo a tabela do SUS, foi R$.193,66. Com isso, obteve-se um custo total médio de R$.518,36 por procedimento. Entretanto, o valor médio repassado pelo SUS ao hospital por procedimento foi R$.429,19. CONCLUSÃO: o tratamento cirúrgico dos carcinomas cutâneos gerou para o hospital, um déficit médio de R$.89,16 reais por procedimento.
Resumo:
Collection : Collection Monumenta historiae
Resumo:
OBJETIVO: Verificar o efeito da adição do biofeedback (BF) ao treinamento dos músculos do assoalho pélvico (TMAP) para o tratamento da incontinência urinária de esforço (IUE). MÉTODOS: Estudo piloto prospectivo, randomizado e controlado, com mulheres com IUE sem deficiência esfincteriana detectada ao estudo urodinâmico e que realizavam a correta contração dos MAP. Foram excluídas mulheres com doenças neuromusculares e com prolapso genital graus III e IV. Foram randomizadas 40 mulheres em Grupo Controle e Grupo BF. O protocolo de TMAP com equipamento de BF foi constituído de três séries de dez contrações lentas (tônicas), com tempo de manutenção de seis a oito segundos em cada contração, seguido de um período de repouso de mesmo valor. Após cada contração sustentada, eram realizadas de três a quatro contrações rápidas (fásicas) em decúbito dorsal e ortostatismo, duas vezes na semana, totalizando 12 sessões. Avaliou-se o efeito da adição do BF ao TMAP na qualidade de vida pelo King's Health Questionnaire (KHQ), nos sintomas urinários pelo diário miccional e na função dos músculos do assoalho pélvico (MAP) pela palpação digital. A avaliação foi realizada inicialmente e após as 12 sessões de tratamento. O resultado foi descrito em médias e desvios padrão. Para análise de homogeneidade e verificação das diferenças entre os grupos utilizou-se o teste de Mann-Whitney, e para diferenças entre os momentos de observação, o teste de Wilcoxon, com nível de significância de 0,05. RESULTADOS: Diminuição significativa nos escores dos domínios avaliados pelo KHQ na comparação entre os grupos, exceto para o domínio saúde geral (Grupo BF 32,8±26,9 versus Grupo Controle 48,4±29,5; p<0,13). Em concordância, observou-se melhora da função dos MAP após o tratamento no grupo BF, na power (4,3±0,8; p=0,001), endurance (6,0±2,2; p<0,001) e fast (9,3±1,9; p=0,001). Quando comparados os grupos, o Grupo BF destacou-se positivamente em relação ao power (Grupo BF 4,3±0,8 versus Grupo Controle 2,5±0,9; p<0,001), endurance (Grupo BF 6,0±2,2 versus Grupo Controle 2,7±1,9; p<0,001) e fast (Grupo BF 9,3±1,9 versus Grupo Controle 4,6±3,2; p<0,001). Redução da frequência urinária noturna (1,2±1,2 versus 0,7±0,9; p=0,02) e da perda de urina nos esforços (1,5±1,4 versus 0,6±0,8; p=0,001) foi observada no Grupo BF. CONCLUSÃO: A adição do BF ao TMAP para o tratamento da IUE, aplicado de acordo com o protocolo descrito, contribui para melhora da função dos MAP, redução dos sintomas urinários e melhora da qualidade de vida.
Resumo:
Permanent magnet generators (PMG) represent the cutting edge technology in modern wind mills. The efficiency remains high (over 90%) at partial loads. To improve the machine efficiency even further, every aspect of machine losses has to be analyzed. Additional losses are often given as a certain percentage without providing any detailed information about the actual calculation process; meanwhile, there are many design-dependent losses that have an effect on the total amount of additional losses and that have to be taken into consideration. Additional losses are most often eddy current losses in different parts of the machine. These losses are usually difficult to calculate in the design process. In this doctoral thesis, some additional losses are identified and modeled. Further, suggestions on how to minimize the losses are given. Iron losses can differ significantly between the measured no-load values and the loss values under load. In addition, with embedded magnet rotors, the quadrature-axis armature reaction adds losses to the stator iron by manipulating the harmonic content of the flux. It was, therefore, re-evaluated that in salient pole machines, to minimize the losses and the loss difference between the no-load and load operation, the flux density has to be kept below 1.5 T in the stator yoke, which is the traditional guideline for machine designers. Eddy current losses may occur in the end-winding area and in the support structure of the machine, that is, in the finger plate and the clamping ring. With construction steel, these losses account for 0.08% of the input power of the machine. These losses can be reduced almost to zero by using nonmagnetic stainless steel. In addition, the machine housing may be subjected to eddy current losses if the flux density exceeds 1.5 T in the stator yoke. Winding losses can rise rapidly when high frequencies and 10–15 mm high conductors are used. In general, minimizing the winding losses is simple. For example, it can be done by dividing the conductor into transposed subconductors. However, this comes with the expense of an increase in the DC resistance. In the doctoral thesis, a new method is presented to minimize the winding losses by applying a litz wire with noninsulated strands. The construction is the same as in a normal litz wire but the insulation between the subconductors has been left out. The idea is that the connection is kept weak to prevent harmful eddy currents from flowing. Moreover, the analytical solution for calculating the AC resistance factor of the litz-wire is supplemented by including an end-winding resistance in the analytical solution. A simple measurement device is developed to measure the AC resistance in the windings. In the case of a litz-wire with originally noninsulated strands, vacuum pressure impregnation (VPI) is used to insulate the subconductors. In one of the two cases studied, the VPI affected the AC resistance factor, but in the other case, it did not have any effect. However, more research is needed to determine the effect of the VPI on litz-wire with noninsulated strands. An empirical model is developed to calculate the AC resistance factor of a single-layer formwound winding. The model includes the end-winding length and the number of strands and turns. The end winding includes the circulating current (eddy currents that are traveling through the whole winding between parallel strands) and the main current. The end-winding length also affects the total AC resistance factor.
Resumo:
1818/09/25 (Numéro 429).
Resumo:
Syftet med denna avhandling är att undersöka hur de anställda ser på e-utbildning som utbildningsform. E-utbildning kan definieras som en utbildningsform där kursen avläggs via internet antingen i egen takt eller i realtid (Lee & Lee, 2006, s. 429−430). Avhandlingen har en kvalitativ deskriptiv design och har strävat efter att gestalta en innehållsrik sammanfattning av de anställdas generella syn på e-utbildning. Resultatet från undersökningen i avhandlingen ska fungera som grund för ett företag inom industribranschen som ska utveckla ett grundläggande koncept för e-utbildning. Konceptet kommer att fungera som stöd i utvecklandet av nya e-kurser. Forskningsfrågorna för denna avhandling har preciserats på följande sätt: 1. Hurdan är de anställdas generella syn på e-utbildning? 2. Hurdan är de anställdas syn på användandet av e-utbildning på sin egen arbetsplats? - Vilka är de anställdas åsikter om en viss e-kurs? 3. Hurdana erfarenheter har de anställda av e-kurser ur pedagogisk synvinkel? Datamaterialet i undersökningen samlades in med hjälp av kvalitativa forskningsintervjuer. Till respondenter utvaldes fem personer som var anställda i industriföretaget. Alla respondenter hade avlagt en viss e-kurs våren 2013. För bearbetning av datamaterialet användes en kvalitativ innehållsanalys. Resultatet från undersökningen i avhandlingen visar att de anställda i allmänhet är nöjda med e-utbildning som utbildningsform. De ansåg att tillgängligheten är en stor fördel med e-kurser. Som nackdel nämndes att interaktion med andra kursdeltagare saknas. De anställda menade att vissa kurser fungerar bra som e-kurser, men inte alla. De förklarade att det beror på kursens innehåll, svårighetsgrad och karaktär om en kurs är lämplig att ordna som e-kurs. De anställda ansåg att kvaliteten i industriföretagets kurser varierade. Hur meningsfull en kurs ansågs vara, hade samband med kursens mångsidighet. Enligt undersökningen är det viktigt att uppleva att den kurs man går är välplanerad. Detta ansågs vara speciellt viktigt i e-kurser och ökade kursdeltagarnas motivation. De anställda ansåg även att det egna intresset har betydelse för motivationen. De menade att kurser som är relaterade till det egna intresseområdet och de egna arbetsuppgifterna har en positiv inverkan på lärandet.
Resumo:
The association between HLA specificities and leprosy was investigated in a Southern Brazilian population. One hundred and twenty-one patients and 147 controls were typed for HLA-A, B, Cw, DR and DQ. Patients were subdivided into the following subgroups, according to clinical, histological and immunological criteria: lepromatous (N = 55), tuberculoid (N = 32), dimorphous (N = 20), and indeterminate (N = 14). The frequencies of HLA specificities were compared between the total group of patients and controls, and between the same controls and each subgroup of patients. After correction of the probabilities, deviations were not significant, except for the DR2 specificity, which presented a frequency of 44.2% in the total group of patients and 56.3% in the subgroup of individuals with the tuberculoid form of the disease, compared to 23.3% in the controls. Stratified analysis showed that the increased DR2 frequency in the total group of patients was due to the subgroups with the tuberculoid and dimorphous forms. The relative risk of tuberculoid leprosy for DR2-positive individuals was 4.2, and the etiologic fraction of DR2 was 0.429. In conclusion, a positive association of the DR2 specificity with the tuberculoid form of leprosy, but not with the lepromatous, dimorphous, or indeterminate forms, was demonstrated in this Southern Brazilian population