Growth Regulators and KNO3 on Seed Germination of Angelonia salicariifolia

Angelonia salicariifolia is an herbaceous perennial native to Brazil with ornamental potential as garden plant, cut-flower and potted plant. It has blue flowers 1.0 to 1.4 cm long, in 10-30 cm long terminal racemes. In previous studies seeds of A. salicariifolia showed a positive photoblastic behavior under constant temperatures of 10, 15, 20, 25, 30 and 35 degrees C. The present study evaluated the effects of growth regulators (100, 200, 300, 400, 500 mg L-1 of gibberellic acid and 2.25, 11.3, 22.5 mg L-1 of 6-benzylamino-purine) and potassium nitrate (0.2 and 1.0 %) on promoting its seed germination. The experiment was conducted in a completely randomized design with six replications of 25 seeds, for each treatment. Seeds from dehiscent capsules were sown on one layer of filter paper and moistened with growth regulators or KNO3 solutions. Germination was carried out at 25 degrees C +/- 1 degrees C, under continuous light or darkness. Germination (protusion of the radicle) was observed daily for 20 days. In the dark, only gibberellic acid promoted seed germination. The percentage of germination and the speed of germination index at 400 mg L-1 (47.3%; 0.86) and 500 mg L-1 (52.0%; 0.95) were significantly higher compared to 100 mg L-1 (27.8%; 0.38) and 200 mg L-1 (32.3%; 0.49). The mean germination time at 500 mg L-1 (10.0 days) was significantly smaller compared to 100 mg L-1 (11.9 days) and 200 mg L-1 (11.5 days). Under light, treatments did not differ among each other or from the control, except for 22.5 mg L-1 of 6-benzylamino-purine and potassium nitrate (1.0%), which decreased the percentage of germination and the speed of germination index compared to control. The application of growth regulators or potassium nitrate under light condition is not necessary, since these treatments did not improve germination percentage or the speed of germination index.

Evaluation of 316L Stainless Steel Corrosion Resistance in Solution Simulating the Acid Hydrolysis of Biomass

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alelopatia de Leucena sobre soja e plantas invasoras

With the advance of agriculture, there was consequent rising in environment degradation. Therefore, It is interesting the use of plants which have in their chemical composition substances capable of helping in the control of weeds to minimize the use of pesticides. Hence, the objective of this paper was to evaluate solutions of leucena extract on weeds that are frequent on soybean crop. The treatments were leucena extracts at 0, 20, 40, 60, 80 and 100% at room temperature water and water heated to 80 degrees C. The extracts were obtained by crushing 200g of leucena leaves and mixing them with one liter of distilled water with the help of a blender. Seeds were kept in B.O.D. at a temperature of 25 degrees C, with a photoperiod of 12 hours of light. Evaluations were done oil a daily basis, from the first to the last day of the experiment, varying according to the species. Results show a negative interference of the extracts, both hot and cold, in the root length of Ipomoea grandifolia, in the percentage of germination and in the root length of Arrowleaf sida and Hair beggarticks. There was no negative interference in the analyzed parameters for soybean seeds. Thus, the results indicate allelopatic potential of Leucaena leuucocephala as an alternative for the management of weeds without interfering on the development of the soybean crop.

Efeito alelopático de extrato aquoso de folhas de Azadirachta indica A. Juss. em alface, soja, milho, feijão e picão-preto

The family Meliaceae has been identified as one of the most promising for biological control, as most species have biologically active compounds. Among the species, the Neem (Azadirachta indica A. Juss) is that stands out most for its efficiency and low toxicity, and it is utilized to control insects, fungi and nematodes. The aim of this work was to verify the allelopathic potential of aqueous extract of fresh leaves of Neem on germination of lettuce, soybeans, maize, beans and Bidens pilosa, as a way to control this weed. The extract was obtained by grinding 200g/L of fresh leaves of the Neem (considered extract 100%) and diluting in distilled water at concentrations of 80, 60, 40, and 20%, and a control with only water. The seeds were kept in the germination chamber at a temperature of 25 degrees C, with photoperiod of 12 hours of light. The aqueous extract affected the germination percentage and average length root of lettuce, with values of 1% and 0.1, cm respectively. For the soybeans, the extract influenced negatively the average time of germination and average speed of germination. There was a drastic reduction of the average root length at higher concentration for soybean, corn and beans. For Bidens pilosa all the parameters analyzed were negatively affected, which means sensitivity to the extract. The bioassay performed in the laboratory showed that the aqueous extract of fresh leaves of Azadirachta indica has allelopathic effect on all species.

Influence of temperature on the release of plasminogen activator.

Fibrinolysis is a basic defense mechanism of the organism designed to control the deposition of fibrin in the vascular system and elsewhere. Fibrinolytic activity was measured by the fibrin plate method for three groups of rats (N = 6) that were maintained at room temperature, 20-25 degrees C, 3 degrees C or 38 degrees C for 4 h before testing. Based on measurement of fibrinolytic activity, the level of plasminogen activator released from isolated aortic segments of rats maintained at room temperature (24-28 degrees C) differed significantly from that of the 38 degrees C group. The animals maintained at 3 degrees C did not release plasminogen activator, suggesting that the fibrinolytic response was impaired at low temperature.

Rugosidade superficial de ligas com alto conteúdo de cobre, em função do aquecimento acima da temperatura de fusão.

Being the surface roughness a fundamental property in the fit of the castings, it was determined the roughness of 5 high-copper casting alloys, according to the heating over their melting temperature. That way, the specimens made with smooth plastic in the shape of a rectangular plate, 2 mm x 7 mm x 11 mm were invested into a cristobalite investment. After heating and elimination on the plastic, the molds were filled by 3 g of molten alloy, casted in a electrical casting machine at the casting temperature at 25 degrees C and 50 degrees C overheating. The surface roughness was measured in a roughness analyser, Talysurf. As a result, it was verified that there is a variation of surface roughness among the alloys tested, and the heating of the alloys until 50 degrees C over the melting temperature does not interfere in the roughness.

The effect of temperature on self-etching adhesive penetration.

The purpose of this study was to investigate the penetration of an aggressive self-etching adhesive system at refrigerated and room temperatures into ground and unground enamel surfaces. Thirty extracted human teeth were used to measure adhesive penetration into enamel by light microscopy analysis (x400). The unground enamel surfaces were cleaned with pumice and water using a rotary dental brush. For each specimen, part of the unground enamel was manually ground and part was kept intact. A self-etch adhesive was evaluated for its ability to penetrate ground and unground enamel surfaces at room temperature (25 degrees C), at 30 minutes after removal from the refrigerator, and immediately after removal from the refrigerator (6 degrees C). Data were analyzed using variance and the Tukey test, which revealed significant differences in length of penetration of this material when applied on ground and unground enamel surfaces and between the different temperatures used (P > .05). The self-etching system used in this study had significantly lower penetration into unground enamel and at 6 degrees C (P < .05). No statistical difference was found between the interactions of these factors. It was concluded that the self-etching system produced the best penetration into ground enamel surface at room temperature (25 degrees C) and at 30 minutes after removing the specimens from the refrigerator.

CoO doping effects on the ZnO films through EBPDV technique

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aging of red wines made from hybrid grape cv. BRS Violeta: Effects of accelerated aging conditions on phenolic composition, color and antioxidant activity

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Surfactant-cosurfactant interactions and process parameters involved in the formulation of stable and small droplet-sized benznidazole-loaded soybean O/W emulsions

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Uso de resíduos de madeiras e frutos da amazônia para o cultivo in vitro do cogumelo comestível shiitake

Local abundant residues with low or without commercial value with potential to make the production of edible mushrooms economically viable in any region of Brazil must be employed for cultivation. Thus, the radial mycelial growth of LED 20 strain of Lentinula edodes (Berk.) Pegler was verified in culture media prepared with extract of regional residues by using substrates based on Protium puncticulatum, Cariniana micrantha and Caryocar glabum sawdust, supplemented with 20% of grinded residues from the barks of the fruits of Astrocaryum aculeatum and Theobroma grandiflorum. Residues from eucalyptus (Eucalyptus spp) sawdust and wheat bran (Triticum aestivum L) were used as witness because they are commonly used in the cultivation of L. edodes. The experimental design used was totally randomized, in 4x3 factorial scheme, totalizing 12 treatments with five repetitions, being that each repetition corresponded to a Petri dish, adding up a total of 60 dishes, which were incubated under 25 degrees C. The diameter of the colony was daily evaluated during seven days of incubation. After that period, it was verified that media prepared with P. puncticulatum extract, whose supplementation with both brans was favorable for fungic development, presented some of the highest averages of mycelial growth of LED 20 strain of L. edodes, confirming the potential of those residues.

Hypothermia and Early Neonatal Mortality in Preterm Infants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effect of Egg Rearing Temperature and Storage Time on the Biological Characteristics of the Predatory Stink Bug Podisus nigrispinus (Hemiptera: Pentatomidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Xylanase and beta-Xylosidase from Penicillium janczewskii: Production, Physico-chemical Properties, and Application of the Crude Extract to Pulp Biobleaching

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Taxonomic studies on Mucor inaequisporus, isolated for the first time in South America

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)