Desempenho de reatores aeróbios de leito fluidizado com circulação interna na remoção de matéria carbonácea tratando diferentes águas residuárias

The organic matter. (OM) removal efficiency in the biochemical oxygen demand (BOD) and chemical oxygen demand (COD) forms for domestic wastewater and semi-intensive fish culture effluents by using three phase aerobic fluidized bed reactors with circulation in concentric tubes was studied. Three different ratios between external and internal areas by different internal diameter configurations (100, 125 and 150mm) to the same external diameter of 250mm were used; sand for filters and granulated activated carbon were used as supporting media. The reactors were tested for three hydraulic retention times: 11.5min to the R100, and 3h for the R125 and R150 reactors. The results demonstrated that this kind of reactors had good performance in the BOD and COD removal for different concentrations of waste waters. BOD mean removal efficiencies obtained were: 47% at the R100 reactor, 57% and 93% of raw and filtered BOD respectively at R125, 48 and 89% of raw and filtered BOD at R150. The COD mean calculated removal efficiencies were: 75% at the R100 reactor, 56 and 86% of raw and filtered COD at R125, and 54 and 86% of raw and filtered COD at R150. In the case of domestic wastewater it is necessary to provide a solids removal system at the reactor outflow in order to increase the removal of suspended OM from the final effluent.

Avaliação da floco-decantação de manta de lodo associada à decantação de alta taxa no tratamento de águas de consumo humano

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Diagnóstico ambiental das águas do estuário Jundiaí-Potengi pela determinação dos índices de qualidade da água e toxidez

This study is an environmental diagnosis of the Jundiaí-Potengi/RN estuarine system waters, using calculations of pollution indicator indices such as the Water Quality Index (WQI) and the Toxicity Index (TI). The samples were collected at twelve points on the estuary, at high and low tide, between August and November 2007, over four campaigns. The study area, located in a high impact region, has various activities on its banks such as: discharge of untreated or undertreated domestic and industrial sewage, shrimp farming, immunizer stabilization lakes, riverside communities, etc. All the parameters analyzed were compared to the limits of CONAMA Resolution No. 357 of 2005 for healthy and saline Class 1 waters. The results found prove the impact caused by various activities, mainly the parameters related to the presence of organic material, such as DQO, DBO, COT and thermotolerant colliforms. The IQA for most of the collection points was of medium quality. For the metals, although values above the Resolution limits were found, most of them were lower than the detection limits of ICP-OES used, indicating that they tend to be transported by the dynamic of the tides or rainfall and are deposited in bottom sediments, resulting in a TI of 1.0 in this water, when they are absent, which occurs in most cases, or 0.0, when heavy metals are found in these waters

Estudo da modificação de bentonita para a remoção de fenol em águas produzidas na indústria de petróleo

This study evaluates the inclusion of quaternary ammonium salt, bromide hexadecyl trimethyl ammonium (HDTMA-Br) on sodium bentonite to evaluate their performance on the adsorption of phenol present in produced water. It was observed an increase in d001 samples modified with HDTMA-Br by diffraction of X-rays, showing the intercalation of quaternary ammonium cations in the interlamellar layers of clay. Through the adsorption isotherms could be abserver adsorption behavior of sodium bentonite and organophilic bentonite produced in three different concentrations of HDTMA-Br for adsorption of phenol, which is the main phenolic compound found in the product water. Different concentrations of synthetic solutions of phenol were placed in contact with these adsorbents under the same conditions of agitation and temperature. The adsorbent showed adsorptive favorable, especially the clay modified with the highest concentration of HDTMA-Br, 150% CEC of clay, BEN30-14, with higher amounts of phenol adsorbed per gram of adsorbent (mg.g-1)

Monitoramento das águas da bacia hidrográfica pirangi pela determinação dos índices de qualidade da água-iqa e índice de toxidez-it

The problems of water supply in Northeast Brazil are severe and require more focused studies. This work was intended to assess water quality in the watershed Pirangi, located in the Northeastern state of the newborn using the Water Quality Index, AQI associated with the Index of Toxicity-IT. The data presented in this study were collected in November 2008, June 2009 and March 2010 at eight sampling stations distributed throughout the basin. The study covered nine parameters, based on guidelines established by CETESB, and seven members of Metal Toxicity index-IT. These waters are framed in the classification between GOOD and BAD showing AQI 41.34 minimum and a maximum of 76.23. Virtually all seven metals analyzed were below the detection limits of ICP-OES giving IT a water equal to one when they are absent and 0 when there are levels of trace metals

Estudo dos principais fatores que influenciam na solubilização dos hpas em águas

Polycyclic aromatic hydrocarbons (PAHs) constitute a family of compounds characterized by having two or more condensed aromatic rings and for being a class of substances that are widely distributed in the environment as a complex mixture, being very persistent in the environment due to its low solubility in water. The application of chemometric methods to analytical chemistry has provided excellent results in studying the solubility of PAHs in aqueous media in order to understand the mechanisms involved in environmental contamination. The method consists in analyzing the solubilization of PAHs from diesel oil in water varying parameters such as stirring time, volume of oil added and pH, using a full factorial design of two levels and three factors. PAHs were extracted with n-hexane and analyzed by fluorescence spectroscopy because they have molecular characteristics fluorescent due to the large number of condensed rings and links, and gas chromatography coupled to a mass spectrometer (GC-MS). The results of fluorescence analysis showed that only the stirring time and pH influenced the solubility of PAHs in diesel fuel. How is a non-selective technique for the study of fluorescence was performed on form and semi-quantitative. And for the chromatographic analysis the results showed that the solubility of the different PAHs is influenced differently so that you can classify them into groups by the results of the effects

Avaliação da remoção de hidrocarbonetos aromáticos (BTEX) em águas utilizando materiais nanoestruturados do tipo Ti-MCM-41

Volatile Organic Compounds are pollutants coming mainly from activities that use fossil fuels. Within this class are the BTEX (benzene, toluene, ethylbenzene and xylenes) compounds that are considered hazardous. Among the various existing techniques for degradation of pollutants, there is advanced oxidation using H2O2 generating hidoxil radical ( OH). In this work, the mesoporous material of MCM-41 was synthesized by hydrothermal method and then was used as support, the impregnation of titanium by the method of synthesis with excess solvent to obtain the catalyst Ti-MCM-41. The catalyst was used in the reaction catalyzed removal of BTEX in water using H2O2 as oxidant. The materials were characterized by: XRD, TG/DTG, FTIR, nitrogen adsorption-desorption and FRX-EDX, in order to verify the method of impregnation of the mesoporous titanium support was effective. Catalytic tests were carried out in reactors of 20 mL containing BTEX (100.0 μg/L), H2O2 (2.0 M) and Ti-MCM-41 (2.0 g/L) in acid medium. The reaction occurred for 5 h at 60 °C and analysis were performed by gas chromatography with photoionization detector and static headspace sampler. The characterizations have proven the effectiveness of the synthesis method used and the incorporation of titanium lt in the support. The catalytic tests showed satisfactory results with conversion of more than 95 % for the studied compounds, where the catalyst 48% Ti-MCM-41 showed a higher removal efficiency of the compounds under study

Remoção, por flotação, de óleo em águas produzidas na indústria de petróleo: eficiência e modelagem do processo

The separation oil-water by the use of flotation process is characterized by the involvement between the liquid and gas phases. For the comprehension of this process, it s necessary to analyze the physical and chemical properties command float flotation, defining the nature and forces over the particles. The interface chemistry has an important role on the flotation technology once, by dispersion of a gas phase into a liquid mixture the particles desired get stuck into air bubbles, being conduced to a superficial layer where can be physically separated. Through the study of interface interaction involved in the system used for this work, was possible to apply the results in an mathematical model able to determine the probability of flotation using a different view related to petroleum emulsions such as oil-water. The terms of probability of flotation correlate the collision and addition between particles of oil and air bubbles, that as more collisions, better is the probability of flotation. The additional probability was analyzed by the isotherm of absorption from Freundlich, represents itself the add probability between air bubbles and oil particles. The mathematical scheme for float flotation involved the injected air flow, the size of bubbles and quantity for second, the volume of float cell, viscosity of environment and concentration of demulsifier. The results shown that the float agent developed by castor oil, pos pH variation, salt quantity, temperature, concentration and water-oil quantity, presented efficient extraction of oil from water, up to 95%, using concentrations around 11 ppm of demulsifier. The best results were compared to other commercial products, codified by ―W‖ and ―Z‖, being observed an equivalent demulsifier power between Agflot and commercial product ―W‖ and superior to commercial product ―Z‖

Avaliação do potencial tóxico de águas oriundas de irrigação agrícola no Baixo-Açu/RN: um problema socioambiental

For many decades the problematic raised about the indiscriminate use of pesticides in modern agriculture has incited the interest of many researchers to discover the effects caused by such products in the environment and consequently in the life of the ones which use that products (farmers) and those people who live in places next to the agricultural areas. Facing these facts, this research had the intention of comprehend the environmental perception of habitants of the Distrito Irrigado do Baixo-Açu (DIBA), located in the semiarid of Rio Grande do Norte, by using agro toxics and its possible environmental effects, as well as evaluate the levels of toxicity of waters from agricultural runoff in this region by using eco-toxicological exams with Ceriodaphnia silvestii. Were done 86 interviews with dwellers and farmers from DIBA. With the results reached in the evaluation of the interviews it was possible to identify that one of major problems is the inappropriate discard of empty packs of the pesticides used at that place. The samples collected for eco-toxicological evaluation showed a variation in its toxicity, once that the point of collect which receives waters from different cultures presented in four out of five samples toxicity for the tested species. Therefore, it concludes that the indiscriminate use of pesticides agricultural practice presented a potential to pollute to the irrigation waters, and the absence of elucidation by the farmers about the manipulation of these products contribute to the risk of environmental contamination and the possible decrease of the quality of life of the dwellers of the region

Expressão de MMP-2 e MMP-9 no endométrio de éguas saudáveis e portadoras de endometrite crônica

Avaliaram-se, por método imunoistoquímico, a expressão e distribuição das metaloproteinases (MMP) 2 e 9 em amostras de endométrio hígido e de éguas portadoras de endometrite crônica. Foram utilizadas 60 biópsias endometriais. A MMP-2 foi observada na parede vascular, nas células estromais e no epitélio glandular, e a imunorreatividade mais intensa foi obtida nas células do epitélio glandular nas endometrites da categoria III e na parede vascular nos endométrios da categoria I. A marcação imunoistoquímica para MMP-9 mostrou-se difusa pelo endométrio e foi observada no epitélio luminal e glandular, na região da parede vascular, nas células estromais, endoteliais e do infiltrado inflamatório. Houve diminuição da marcação imunoistoquímica na região da parede vascular conforme aumentou o grau das lesões endometriais concomitante à diminuição da intensidade da reação. Não houve relação na expressão imunoistoquímica das metaloproteinases estudadas com o tipo de endometrite

Estudo dos métodos de rotina diagnóstica de mastite no leite de éguas

Routine diagnosis methods used in bovine mastitis were studied in 55 mares in lactation. The findings of strip cup test, California Mastitis Test-CMT, electronic somatic cell count-CCS, microbiological culture, and in vitro antimicrobial susceptibility profile of isolates were discussed. Streptococcus spp., Staphylococcus spp, and enterobacteria were the most common microorganisms isolated in health and CMT-positive mammary glands. Staphylococcus aureus and Arcanobacterium pyogenes were identified in two mares presenting clinical mastitis. Mean somatic cell count of eight mares without presence of microorganisms in milk was 247.57x10³/mL and 1.621,86x10³/mL in 47 mares with positive microbiological culture. Moderate concordance (63.8%) between positive reactions in CMT (1 to 3+) and microbiological culture was observed. Amicacin (78.9%), ceftiofur (74.7%), sulpha-trimetoprim (69,0%) and norfloxacin (69.0%), were the most effective drugs, while resistance of isolates was mainly observed against penicillin (64.8%), gentamycin (35.2%), azithromycin (35.2%), enrofloxacin (28.2%), and florfenicol (28.2%).

Estudo do leite de éguas sadias ou portadoras de mastite subclínica, pelo teste de Whiteside, análise microbiológica e contagem de células somáticas

Com o objetivo de identificar a microbiota existente no leite de éguas normais ou portadoras de mastite subclínica, coletaram-se amostras (10 a 15 ml) de leite de 38 animais, que foram examinadas pelo teste de Whiteside, após a homogeneização das amostras dos dois tetos de cada animal. Os resultados foram negativos. Os exames microbiológicos realizados em meios de ágar sangue bovino 10% e ágar MacConkey revelaram presença de bactérias do gênero Staphylococcus spp. e Streptococcus spp. A contagem de células somáticas de amostras individuais de cada teto revelou números superiores a 500.000 células/ml de leite em somente 9,3% das 73 amostras de leite examinadas. Os resultados sugerem a realização de novos estudos objetivando-se a padronização do número de células somáticas no leite de éguas.

Concentração de flúor em águas engarrafadas comercializadas no município de São Paulo

O objetivo do estudo foi avaliar a concentração de flúor na água engarrafada comercializada, comparando-a aos valores impressos no rótulo da embalagem. Foram coletadas 229 amostras de água das 35 marcas disponíveis em diversos supermercados, mercearias e lanchonetes de grande circulação nas diferentes regiões do município de São Paulo, em 2006. A concentração de flúor foi determinada por análise em duplicata, utilizando o eletrodo íon-específico. A concentração de flúor variou entre 0,01 e 2,04 mg/l, com diferenças significantes entre os valores estipulados nos rótulos e os encontrados com a análise. Esses resultados reforçam a importância do controle dos níveis de flúor na água engarrafada por parte da vigilância sanitária.

Determinação da demanda química de oxigênio em águas por espectrofotometria simultânea dos íons crômio(III) e dicromato

Propõe-se metodologia analítica para a determinação da demanda química de oxigênio(DQO) em águas e efluentes pouco poluídos, pela espectrofotometria simultânea dos íons crômio(III) e dicromato, após a clássica oxidação sulfocrômica das amostras, à quente e catalisada por íons Ag+. Demonstra-se que a inter-relação entre as concentrações de DQO, de crômio(III) formado e de dicromato residual permite simplificar a resolução numérica do sistema - de multicomponente, envolvendo as concentrações desses dois íons, e medidas de absorbância em pelo menos dois comprimentos de onda para monocomponente, envolvendo diretamente a concentração em DQO, e medida de absorbância num único comprimento de onda.

Biodegradação de filmes de polipropileno (PP), poli(3-hidroxibutirato) (PHB) e blenda de PP/PHB por microrganismos das águas do Rio Atibaia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)