999 resultados para umidade ponderal


Relevância:

20.00% 20.00%

Publicador:

Resumo:

The sugarcane crop plays an important role on Brazilian economy,, especially in the aspect related to alternative energy sources. Yield of ratoon cane (2nd cycle) was evaluated in relation to resistance to penetration, gravimetric moisture and organic matter in a Typic Tropustalf, in the municipality of Suzanápolis (SP), 20º28'10'' S and 50º49'20'' W, in the Brazilian cerrado, in 2009. The main purpose was to select, among the attributes surveyed, the one with the highest linear and spatial correlations that explains the variability of sugar cane yield. A geostatistical grid was installed in order to collect data from the soil as well from the plant, with 120 sampling points in an area of 14.53 ha. Organic matter correlated linearly and negatively with penetration resistance, indicating that the soil management practices that aim its increase in the soil profile can improve soil physical conditions, and consequently, the development and yield of sugarcane. Both gravimetric moisture (UG) and content of soil organic matter (OM) correlated directly, linearly (UG2 and MO1) and spatially (UG1 and MO1) with sugarcane yield, proving to be the best attributes, among the evaluated ones, to estimate and increase the sugarcane yield.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

PURPOSE: To evaluate the adequacy of gestational weight gain and to determine its association with maternal socioeconomic, demographic and nutritional factors and health care, to estimate the prevalence of low birth weight, macrosomia, preterm birth and cesarean delivery and to identify the association of these outcomes with the adequacy of weight gain. METHODS: A cross-sectional study was performed in 2009/2010 to obtain socioeconomic, demographic, nutritional, dietary and physical activity data of pregnant women assisted by primary health care in a municipality of the state of São Paulo. Subsequently, data were collected from the medical records to evaluate gestational weight gain. Type of delivery, birth weight and gestational age at delivery were obtained from the Livebirths Information System. Gestational weight gain was evaluated according to the recommendations of the Institute of Medicine (2009). Associations were investigated by comparing the frequencies and by logistic regression, with excessive weight gain (yes, no) and insufficient gain (yes, no) being the dependent variables. RESULTS: A total of 212 pregnant women were studied: 50.5% had excessive gain and 19.8% insufficient weight gain. Only prepregnancy nutritional status was associated with adequacy of weight gain: compared with normal weight, prepregnancy overweight women had a four-fold higher chance to gain excessive weight (OR 4.66, 95%CI 2.19-9.4). Nearly a third of babies were born by caesarian section, 5.7% were premature, 7.1% were underweight and 4.7% were macrosomic. There was no association between adequacy of gestational weight gain and these outcomes. CONCLUSION: The proportion of inadequate gestational weight gain was high. Overweight pregnant women have a four-fold higher chance to gain excessive weight, and priority should be given to actions promoting adequate prenatal weight gain.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Engenharia Mecânica - FEG

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Relevância:

20.00% 20.00%

Publicador:

Resumo:

It is known that the urban environment modifies the energy balance between the surface and the atmosphere, causing changes in temperature, relative humidity, among other things, opening the way for studies aimed at urban climatology. Based on the theme of urban climate, this research focuses on the city of Assis, located west of São Paulo. The generation of urban climate is a result of various factors, among which stand out: the use and different land use, the thermodynamic properties of buildings, number of buildings in the urban, socioeconomic activities, etc.. In general, this increases the temperature and reducing relative humidity, providing thermal discomfort. The rural environment is used for comparison studies to this theme by presenting different characteristics in relation to the structure, morphology and urban functionality. The main objective of this study is to determine the characteristics of temperature and humidity environments with the habits and occupations of the different soils in winter, at night, one inserted into the urban fabric of Assis and the other in the rural environment, to verify for evidence of changes in climatic elements because of urbanization. To collect the data will be used mini automatic weather stations that record data on temperature and humidity. For analysis of the results will be made between the data obtained in the city and the countryside, developing graphics application using Excel to tabulate the data. It was found that there were differences in the thermo-hygrometric data collection points, showing a specific urban climate in the city of Assis

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The process of sanding wood is little known and industries use it in a practical way without having studied their best conditions before. There are few studies involving this type of machining. On this basis, this paper studied the effects of varying moisture content of the wood surface quality after the sanding process. It was used a sanding machine with flat horizontal cut parallel to the fibers, using: 02 different species (Pinus elliottii and Corymbia citriodora); 01 sanding abrasive (aluminum oxide) and 03 different particle size abrasives ( P80 , P100 and P120 ) . Initially, the pieces were acclimatized ( 2 ± 7% , 12% and 17% ± 2 ± 2 ) and subsequently passed by the sanding process, and therefore, the surface roughness was analyzed. For each condition, were performed 06 repetitions totaling 54 trials for each species. We analyzed the effects of wood moisture by capturing the power sanding, rougheness, acoustic emission and maximum temperature during the sanding process. The variation of moisture content produced changes in the surface quality of the finished parts, and these changes were more marked in Pinus than Corymbia. During the sanding process of the specimens with 7 % and 12 % humidity, there was a lower noise emission, power consumption and heating surface. When checking the roughness of these parts after this process, it was observed that the surface quality of them were superior in the parts sanded containing 17 % moisture

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Soil tillage is one of the agricultural practices that may contribute to increase the loss of carbon through emission of CO2 (FCO2). The aim of this study was to investigate the effect of three soil tillage systems on FCO2, soil temperature and soil moisture in a sugarcane area under reform. The experimental area consisted of three tillage plots: conventional tillage (CT), conventional subsoiling (CS), and localized subsoiling (LS). FCO2, soil temperature and soil moisture were measured over a period of 17 days. FCO2 showed the highest value in CT (0.75 g CO2 m(-2) h(-1)). Soil temperature presented no significant difference (p > 0.05) between LS (26.2 degrees C) and CS (25.9 degrees C). Soil moisture was higher in LS (24%), followed by CS (21.8%) and CT (18.3%). A significant correlation (r = -0.71; p < 0.05) between FCO2 and soil temperature was observed only in CT. The conventional tillage presented a total emission (2,864.3 kg CO2 ha(-1)) higher than the emissions observed in CS (1,970.9 kg CO2 ha(-1)) and LS (1,707.7 kg CO2 ha(-1)). The conversion from CT to LS decreased soil CO2 emissions, reducing the contribution of agriculture in increasing the concentration of greenhouse gases in the atmosphere.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

The aim of this study was to evaluate the effect of low soil moisture on the efficacy of applying herbicides ametryn + clomazone, sulfentrazone and tebuthiuron in pre-emergence application submitted to simulated rainfalls at different time intervals after application in control of B. pilosa, C. echinatus and U. plantaginea plants. The experiment was carried out in pots with a capacity of 2.5 L in green-house conditions and experimental design was completely randomized with four replications, arranged in a 3x5 factorial (three herbicides and five rains intervals). The herbicides clomazone + ametryn (Sinerge EC) 5.0 L commercial product (cp) ha(-1), sulfentrazone (Boral 500 SC) 1.2 L cp ha(-1) and tebuthiuron (combine SC) 2.0 L cp ha(-1) were applied in pre-emergence and the precipitation of 20 mm were applied under de pots in five time intervals after the herbicide application (0h, 4h, 8h, 12h and 24hours). Visual evaluations of plants control that emerged plants were realized at 14 and 21 days after treatment application and the plant emergence percentage was calculated. The application of these three herbicides in dry soil then rain within 24 hours after application provided C. echinatus plants emergence, reduced B. pilosa emergency but in the end of the experiment effectively controlled these two species and U. plantaginea plants.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Ciência Florestal - FCA

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Introdução: As exigências nutricionais para o paciente transplantado são conhecidas, mas há poucas evidências sobre o consumo alimentar e o seu efeito no estado nutricional. O objetivo deste estudo é avaliar o efeito do transplante de células-tronco hematopoéticas (TCTH) no estado nutricional de pacientes orientados e monitorados quanto ao consumo alimentar durante os primeiros 100 dias do procedimento. Método: Participaram do estudos 27 indivíduos que realizaram TCTH, com idade entre 20 e 60 anos, 13 mulheres e 14 homens, índice de massa corporal médio de 27+/- 5kg/m². Os pacientes receberam orientações nutricionais individualizadas quanto ao consumo de alimentos. Nos momentos pré-TCTH, D+30, D_60 e D+100 (D+n = dias decorridos do TCTH) foram monitorados o consumo de alimentos, a partir de recordatório do consumo de 24 horas e o estado nutricional a partir dos indicadores antropométricos. Resultados: Após 100 dias do transplante, foi constatado que os 27 indivíduos analisados mantiveram estáveis o consumo alimentar e o estado nutricional. Conclusão: A orientação nutricional proporcionou a preservação do estado nutricional após o TCTH, a qual se deu à custa de incremento no consumo de energia e nutrientes oriundos de suplementos alimentares e também de alimentos não tão saudáveis.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Use of ring in Roux-en-Y gastric bypass is still a matter of controversy among bariatric surgeons. There is no consensus on its impact in relation to weight loss and weight maintenance in the long term. AIM: To evaluate the influence of the ring on the evolution of body weight over four years after bariatric surgery. METHODS: Retrospective analyzis of 143 women who underwent laparoscopic Roux-en-Y gastric bypass paired on the use or not use of Silastic® ring. Follow-up time was 48 months. Inclusion criteria were age over 18 years, primary bariatric operation and regular attendance at the clinic during the period of interest for research. The technique kept small gastric reservoir estimated in a volume of 30 ml. The food limb had in average 150 cm and the bile one 40 cm from the duodenojejunal angle. The group "ring" used Silastic® device with length of 6.5 cm, placed 2 cm from gastrojejunal anastomosis. The ring was closed for five polypropylene surgical thread sutures. In the morning after surgery the patients received isotonic fluids; on the second day salty liquid diet and were discharged on the third day. Semisolid diet started from the 20th day and solid on the 30th, with daily tablet of polivitamins. RESULTS: The weight loss was larger on the ring than without ring groups in all periods, respectively 10% and only 5% in the third postoperative year. The proportion of not having reached the 50% excess weight loss expectative was significantly higher in the group without ring than in the group with the ring (31% and 8% respectively in the fourth year). There was no difference between groups in delayed recovery of weight lost with the operation. CONCLUSIONS: The results were favorable to use the ring exclusively when it is analyzed only the weight loss.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Objetivo: a proposta desse estudo foi avaliar, por meio de microscopia eletrônica de varredura (MEV), a interface adesiva após a descolagem de acessórios ortodônticos, fixados em dentes bovinos com emprego de adesivo hidrofílico e hidrofóbico, em condições distintas de umidade do substrato dentário. Métodos: foram utilizados 20 incisivos inferiores, divididos em quatro grupos (n = 5): Grupo I , empregou-se o sistema de colagem contendo o primer hidrofílico Transbond MIP e a pasta adesiva Transbond XT, aplicados em substrato úmido; Grupo II, empregou-se o sistema de colagem primer hidrofóbico Transbond XT e pasta adesiva em substrato úmido; Grupos III e IV, os braquetes foram colados com os mesmos sistemas de união dos Grupos I e II, porém com esmalte dentário seco. Removidos os acessórios, avaliou-se em MEV, em diferentes magnificações, a interface adesiva e a interação dos sistemas adesivos com o esmalte dentário. As imagens foram avaliadas qualitativamente, observando-se o embricamento mecânico para o adesivo hidrófilo em quaisquer condições de substrato. Resultados: a falta de umidade no esmalte condicionado permitiu uma melhor interação entre os materiais de ligação e a estrutura adamantina. O adesivo hidrofóbico apresentou o pior resultado de interação micromecânica quando aplicado a uma estrutura dentária úmida; já o sistema hidrofílico mostrou-se versátil, obtendo resultados aceitáveis em condições de umidade e excelente interação na ausência de contaminação. Conclusão: os autores afirmam que a melhor condição do esmalte dentário para a aplicação de primers é com a ausência de umidade.

Relevância:

20.00% 20.00%

Publicador:

Resumo:

Pós-graduação em Agronomia (Irrigação e Drenagem) - FCA

Relevância:

20.00% 20.00%

Publicador:

Resumo:

This study aimed to establish a calibration model of a TDR equipment to determinate thewood moisture of Grevillea robusta (Cunn.). It was selected alleatory, 11 logs of Grevillea robusta (Cunn.), it was dried in a regulate electric greenhouse at 40o C. During the dry process, the moisture was determinate, periodically and systematically by gravimetric and TDR methods. Through the gravimetric method, moisture vary from 125,88% to 6,62% while the TDR method, the variation was from 119,83% to 5,79%. The best model adjusted to the wood moisture in the determination of the function of relative dielectric constant, using this technique, was the exponential 50,20 132,72 140,27 K U e − = − ⋅ , with a R2 = 0,96, with indicator of trust or performance 0,97 they were classified as very good, according to Camargo and Sentelhas (1997). The correlation between the gravimetric method (reference) and TDR, showed to be equivalent for both methodologies. It was concluded that the TDR can be used to the determination of wood moisture of Grevillea robusta (Cunn.), in a precise and fast way, once it was established it calibration.