Transportador de correia: componentes e cálculos básicos para seu dimensionamento

Increasingly, people searches for an efficient and economic way for transporting bulk materials. Transport through belts is now the most widely used mean for transporting bulk materials, used by companies from various sectors such as mining, quarrying, agribusiness, etc. There are many advantages of using a conveyor belt as compared to rail or by truck. Trucks needs a driver, have a high risk of accidents as well as a high cost for maintenance and as well as trains, after making the downloading of the material, return empty to the next load. The cost for the construction of a railway is very high, making it often impossible. The conveyor belt have a high cost of installation, but it works 24 hours a day, 365 days a year. The upper side of the belt is always loaded, the maintenance cost is average and the risk of accidents is low, causing it to be the ideal way to transport bulk materials. This monography aims to interest the reader about what is a conveyor belt, what are its main components and demonstrate the basic calculations for their sizing and selection of components. Throughout the work, scaled a belt conveyor for use in the mining sector, but the concepts demonstrated apply to the transport of any material

Análise do comportamento em fadiga de rodas ferroviárias fabricadas pelos processos de forjamento e fundição

Since the beginning of the railway industry until today, rail wheels are important components to the good working of a railway. For being a critical security item, design and maintenance are done with extremely care to avoid failures. Despite de fact of railway components be projected to support a big number of cyclic solicitation during its life, some accidents still occur. These accidents, despite the low frequency, always have great consequences, drawing in great financial, material, and people losses. Nowadays, railway component failure is relatively low, because it’s been projected to work below the materials Fatigue Resistance Limit, however, with the growing demand of faster trains and higher load for each axle, the occurrence probability is even bigger. This work includes a comparative study of two fabrication processes (casting and forging) applied in the production of rail wheels where it was measured the mechanical properties of traction and fatigue. The study also verified through microstructural analysis, hardness, traction and fatigue tests, statistical analysis of fatigue test results and fractographic analysis that forging process lead to better correlations between fatigue life and mechanical properties, providing more security in railroads, less wagon retention caused by corrective maintenance and smaller operational cost with its use

Estudo de materiais supercondutores em forma de SQUID com uma constrição usando métodos de paralelização computacional

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Qualitative analysis by online nuclear magnetic resonance using Carr-Purcell-Meiboom-Gill sequence with low refocusing flip angles

The Carr-Purcell-Meiboom-Gill (CPMG) pulse sequence has been used in many applications of magnetic resonance imaging (MRI) and low-resolution NMR (LRNMR) spectroscopy. Recently. CPMG was used in online LRNMR measurements that use long RF pulse trains, causing an increase in probe temperature and, therefore, tuning and matching maladjustments. To minimize this problem, the use of a low-power CPMG sequence based on low refocusing pulse flip angles (LRFA) was studied experimentally and theoretically. This approach has been used in several MRI protocols to reduce incident RF power and meet the specific absorption rate. The results for CPMG with LRFA of 3 pi/4 (CPMG(135)), pi/2 (CPMG(90)) and pi/4 (CPMG(45)) were compared with conventional CPMG with refocusing pi pulses. For a homogeneous field, with linewidth equal to Delta nu = 15 Hz, the refocusing flip angles can be as low as pi/4 to obtain the transverse relaxation time (T(2)) value with errors below 5%. For a less homogeneous magnetic field. Delta nu = 100 Hz, the choice of the LRFA has to take into account the reduction in the intensity of the CPMG signal and the increase in the time constant of the CPMG decay that also becomes dependent on longitudinal relaxation time (T(1)). We have compared the T(2) values measured by conventional CPMG and CPMG(90) for 30 oilseed species, and a good correlation coefficient, r = 0.98, was obtained. Therefore, for oilseeds, the T(2) measurements performed with pi/2 refocusing pulses (CPMG(90)), with the same pulse width of conventional CPMG, use only 25% of the RF power. This reduces the heating problem in the probe and reduces the power deposition in the samples. (C) 2011 Elsevier B.V. All rights reserved.

Tragedy on grade crossing: driver failure or systemic fragility?

In 2010, an accident occurred in Americana-SP, Brazil, involving two trains and one bus on a Grade Crossing, when 10 people died and 17 were injured including workers. This paper aims to analyze the accident using the Model of Analysis and Prevention of Work Accidents (MAPA). The method provides observation of work, interviews and analysis of documents to understand precedents of the event in the following stages: to understand the usual work from the involved people, the changes occurred in the system, the operation of barriers, managerial and organizational aspects. By the end, measures are suggested to avoid new occurrences. The accident took place at night in a site with insufficient lighting. The working conditions of bus drivers, train operators and watchmen are inadequate. There were only symbolic barriers (visual and acoustic signals) triggered manually by watchman upon train operator radio communication. The fragility of the barrier system associated to poor lighting and short time to trigger the signaling seem to play a critical role in the event. Contrary to the official report which resulted in guilt of the bus driver, the conclusion of the paper emphasizes the fragility of the safety system and the need of level crossing reproject.

Analgesic effects of repetitive transcranial magnetic stimulation of the motor cortex in neuropathic pain: Influence of theta burst stimulation priming

Background Conventional protocols of high-frequency repetitive transcranial magnetic stimulation (rTMS) delivered to M1 can produce analgesia. Theta burst stimulation (TBS), a novel rTMS paradigm, is thought to produce greater changes in M1 excitability than conventional protocols. After a preliminary experiment showing no analgesic effect of continuous or intermittent TBS trains (cTBS or iTBS) delivered to M1 as single procedures, we used TBS to prime a subsequent session of conventional 10?Hz-rTMS. Methods In 14 patients with chronic refractory neuropathic pain, navigated rTMS was targeted over M1 hand region, contralateral to painful side. Analgesic effects were daily assessed on a visual analogue scale for the week after each 10?Hz-rTMS session, preceded or not by TBS priming. In an additional experiment, the effects on cortical excitability parameters provided by single- and paired-pulse TMS paradigms were studied. Results Pain level was reduced after any type of rTMS procedure compared to baseline, but iTBS priming produced greater analgesia than the other protocols. Regarding motor cortex excitability changes, the analgesic effects were associated with an increase in intracortical inhibition, whatever the type of stimulation, primed or non-primed. Conclusions The present results show that the analgesic effects of conventional 10?Hz-rTMS delivered to M1 can be enhanced by TBS priming, at least using iTBS. Interestingly, the application of cTBS and iTBS did not produce opposite modulations, unlike previously reported in other systems. It remains to be determined whether the interest of TBS priming is to generate a simple additive effect or a more specific process of cortical plasticity.

Plantar flexion force induced by amplitude-modulated tendon vibration and associated soleus V/F-waves as an evidence of a centrally-mediated mechanism contributing to extra torque generation in humans

Background: High-frequency trains of electrical stimulation applied over the human muscles can generate forces higher than would be expected by direct activation of motor axons, as evidenced by an unexpected relation between the stimuli and the evoked contractions, originating what has been called “extra forces”. This phenomenon has been thought to reflect nonlinear input/output neural properties such as plateau potential activation in motoneurons. However, more recent evidence has indicated that extra forces generated during electrical stimulation are mediated primarily, if not exclusively, by an intrinsic muscle property, and not from a central mechanism as previously thought. Given the inherent differences between electrical and vibratory stimuli, this study aimed to investigate: (a) whether the generation of vibration-induced muscle forces results in an unexpected relation between the stimuli and the evoked contractions (i.e. extra forces generation) and (b) whether these extra forces are accompanied by signs of a centrally-mediated mechanism or whether intrinsic muscle properties are the redominant mechanisms. Methods: Six subjects had their Achilles tendon stimulated by 100 Hz vibratory stimuli that linearly increased in amplitude (with a peak-to-peak displacement varying from 0 to 5 mm) for 10 seconds and then linearly decreased to zero for the next 10 seconds. As a measure of motoneuron excitability taken at different times during the vibratory stimulation, short-latency compound muscle action potentials (V/F-waves) were recorded in the soleus muscle in response to supramaximal nerve stimulation. Results: Plantar flexion torque and soleus V/F-wave amplitudes were increased in the second half of the stimulation in comparison with the first half. Conclusion: The present findings provide evidence that vibratory stimuli may trigger a centrally-mediated mechanism that contributes to the generation of extra torques. The vibration-induced increased motoneuron excitability (leading to increased torque generation) presumably activates spinal motoneurons following the size principle, which is a desirable feature for stimulation paradigms involved in rehabilitation programs and exercise training.

Hierarchical multi-label classification using local neural networks

Hierarchical multi-label classification is a complex classification task where the classes involved in the problem are hierarchically structured and each example may simultaneously belong to more than one class in each hierarchical level. In this paper, we extend our previous works, where we investigated a new local-based classification method that incrementally trains a multi-layer perceptron for each level of the classification hierarchy. Predictions made by a neural network in a given level are used as inputs to the neural network responsible for the prediction in the next level. We compare the proposed method with one state-of-the-art decision-tree induction method and two decision-tree induction methods, using several hierarchical multi-label classification datasets. We perform a thorough experimental analysis, showing that our method obtains competitive results to a robust global method regarding both precision and recall evaluation measures.

Techniques and Methods for a multi-scale analysis of neuromuscular fatigue

This thesis proposes an integrated holistic approach to the study of neuromuscular fatigue in order to encompass all the causes and all the consequences underlying the phenomenon. Starting from the metabolic processes occurring at the cellular level, the reader is guided toward the physiological changes at the motorneuron and motor unit level and from this to the more general biomechanical alterations. In Chapter 1 a list of the various definitions for fatigue spanning several contexts has been reported. In Chapter 2, the electrophysiological changes in terms of motor unit behavior and descending neural drive to the muscle have been studied extensively as well as the biomechanical adaptations induced. In Chapter 3 a study based on the observation of temporal features extracted from sEMG signals has been reported leading to the need of a more robust and reliable indicator during fatiguing tasks. Therefore, in Chapter 4, a novel bi-dimensional parameter is proposed. The study on sEMG-based indicators opened a scenario also on neurophysiological mechanisms underlying fatigue. For this purpose, in Chapter 5, a protocol designed for the analysis of motor unit-related parameters during prolonged fatiguing contractions is presented. In particular, two methodologies have been applied to multichannel sEMG recordings of isometric contractions of the Tibialis Anterior muscle: the state-of-the-art technique for sEMG decomposition and a coherence analysis on MU spike trains. The importance of a multi-scale approach has been finally highlighted in the context of the evaluation of cycling performance, where fatigue is one of the limiting factors. In particular, the last chapter of this thesis can be considered as a paradigm: physiological, metabolic, environmental, psychological and biomechanical factors influence the performance of a cyclist and only when all of these are kept together in a novel integrative way it is possible to derive a clear model and make correct assessments.

Automatische objektive Identifikation und Berechnung der Eigenschaften von Rossbywellenzügen

In dieser Arbeit wird eine Methode entwickelt, die Rossbywellenzüge automatisch identifiziert und und deren Eigenschaften quantifiziert. Mit dieser Methode wird der Wellenzug als eine Einheit in Raum und Zeit interpretiert. Einheit im Raum heißt, dass nicht die einzelnen Tröge und Rücken eines Wellenzugs betrachtet werden, sondern deren Einhüllende. Einheit in der Zeit bedeutet, dass der Wellenzug nicht nur zu einem Zeitpunkt betrachtet wird, sondern über seine gesamte Lebensdauer hinweg. Um den Wellenzug als räumliche und zeitliche Einheit zu erhalten, werden die Einhüllenden der Wellenzüge in Längengrad-Zeit Diagrammen, sogenannten Hovmöllerdiagrammen, betrachtet. Dort werden zusammenhängende Regionen als Objekte, die jeweils einen Wellenzug repräsentieren, identifiziert. Deren Eigenschaften werden dann automatisch berechnet. Diese Eigenschaften können nun direkt dem zugrunde liegenden Rossbywellenzug zugeordnet werden.rnDie neue Methode wird in zwei verschiedenen Szenarien angewendet: erstens zur Beurteilung der Vorhersagequalität eines einzelnen Rossbywellenzugs und zweitens für die klimatologische Betrachtung von Rossbywellenzügen im ERA-40 Reanalysedatensatz. Sie wurde weiterhin mit bisher verwendeten Methoden zur Identifikation und Quantifizierung von Rossbywellenzügen verglichen.rnDie Untersuchung der Vorhersagequalität ergab, dass in dem betrachteten Fall die Übereinstimmung der Vorhersage mit der Analyse des Wellenzugs gering war, sofern das Modell initialisiert wurde, bevor der Rossbywellenzug eingesetzt hatte. Im Gegensatz dazu nahm die Vorhersagequalität deutlich zu, wenn der Wellenzug bereits in den Vorhersagedaten enthalten war. Dies deutet darauf hin, dass es in dem vorliegenden Fall problematisch ist, mit dem Modell den Auslösemechanismus korrekt voherzusagen. Für die weitere Untersuchung der Vorhersagequalität wurde eine spezielle Art der Darstellung der Daten verwendet, mit deren Hilfe deutlich wurde, dass das verwendete Modell in der Lage ist, diesen Wellenzug ungefähr sechs Tage im Voraus vorherzusagen. Diese Zeitspanne ist deutlich kürzer als die Lebensdauer des Wellenzugs, die etwa 10 Tage beträgt.rnIm Rahmen der klimatologischen Studie ergab sich eine positive Korrelation zwischen der Lebensdauer eines Rossbywellenzugs und des Bereichs den dieser Wellenzug während seiner gesamten Existenz in zonaler Richtung überstreicht. Für Wellenzüge mit einer kurzen Lebensdauer ergab sich eine ebenfalls positive Korrelation zwischen der mittleren Amplitude und der Dauer des Wellenzugs. Für eine längere Lebensdauer geht diese Korrelation aber in eine Sättigung über und die mittlere Amplitude steigt nicht mehr weiter an. Als eine mögliche Erklärung für dieses Verhalten wird angeführt, dass eine gewisse Stärke der Amplitude benötigt wird um stromabwärtige Entwicklung zu erhalten aber zu große Amplituden im Allgemeinen zum Brechen der Welle führen. Das Brechen leitet den letzten Abschnitt im Lebenszyklus eines Rossbywellenzuges ein, welcher im Anschluss meist zerfällt. Ein weiteres Ergebnis der klimatologischen Untersuchung ist das Auffinden bevorzugter Regionen der Entstehung und des Abklingens von Rossbywellenzügen. Diese Regionen unterscheiden sich erheblich für Rossbywellenzüge unterschiedlicher minimaler Lebensdauer. Langlebige Rossbywellenzüge entstehen demnach hauptsächlich über Ostasien und dem Westpazifik und vergehen dann über Europa.rnSchließlich wurde die entwickelte Methode in einen systematischen Vergleich anderer Methoden zur Identifikation und Quantifizierung von Rossbywellenzügen eingereiht. Die betrachteten Methoden beinhalten verschiedene Trog-und-Rücken Hovmöllerdiagramme des Meridionalwindes, Methoden die Rossbywellenzüge als eine Einheit identifizieren und Methoden die den Beitrag verschiedener physikalischer Aspekte zu der Entwicklung von Rossbywellenenzügen quantifizieren. Der Vergleich macht deutlich, dass jede Methode ihre individuellen Stärken und Schwächen hat. Dies bedeutet insbesondere, dass die Eignung der Methode von dem Stadium des Lebenszyklus, in dem sich der Rossbywellenzug befindet und dem Fokus, den man bei der Betrachtung hat, abhängt. Ideal ist eine Kombination mehrerer Methoden, da dies ein vollständigeres Bild eines Rossbywellenzuges ergibt als einzelne Methoden es zu liefern vermögen. Obwohl alle Methoden für die Anwendungen, für die sie jeweils konzipiert wurden, geeignet sind, ergeben sich bei der Diagnose der Rossbywellenzüge beträchtliche Unterschiede. Letztendlich stellt sich heraus, dass sogar die Defintion eines Rossbywellenzugs bis zu einem gewissen Grad von der zu seiner Identifizierung verwendeten Methode abhängt.

Interactions between short-term and long-term plasticity: shooting for a moving target

Far from being static transmission units, synapses are highly dynamical elements that change over multiple time scales depending on the history of the neural activity of both the pre- and postsynaptic neuron. Moreover, synaptic changes on different time scales interact: long-term plasticity (LTP) can modify the properties of short-term plasticity (STP) in the same synapse. Most existing theories of synaptic plasticity focus on only one of these time scales (either STP or LTP or late-LTP) and the theoretical principles underlying their interactions are thus largely unknown. Here we develop a normative model of synaptic plasticity that combines both STP and LTP and predicts specific patterns for their interactions. Recently, it has been proposed that STP arranges for the local postsynaptic membrane potential at a synapse to behave as an optimal estimator of the presynaptic membrane potential based on the incoming spikes. Here we generalize this approach by considering an optimal estimator of a non-linear function of the membrane potential and the long-term synaptic efficacy—which itself may be subject to change on a slower time scale. We find that an increase in the long-term synaptic efficacy necessitates changes in the dynamics of STP. More precisely, for a realistic non-linear function to be estimated, our model predicts that after the induction of LTP, causing long-term synaptic efficacy to increase, a depressing synapse should become even more depressing. That is, in a protocol using trains of presynaptic stimuli, as the initial EPSP becomes stronger due to LTP, subsequent EPSPs should become weakened and this weakening should be more pronounced with LTP. This form of redistribution of synaptic efficacies agrees well with electrophysiological data on synapses connecting layer 5 pyramidal neurons.

Theta burst stimulation reduces disability during the activities of daily living in spatial neglect

Left-sided spatial neglect is a common neurological syndrome following right-hemispheric stroke. The presence of spatial neglect is a powerful predictor of poor rehabilitation outcome. In one influential account of spatial neglect, interhemispheric inhibition is impaired and leads to a pathological hyperactivity in the contralesional hemisphere, resulting in a biased attentional allocation towards the right hemifield. Inhibitory transcranial magnetic stimulation can reduce the hyperactivity of the contralesional, intact hemisphere and thereby improve spatial neglect symptoms. However, it is not known whether this improvement is also relevant to the activities of daily living during spontaneous behaviour. The primary aim of the present study was to investigate whether the repeated application of continuous theta burst stimulation trains could ameliorate spatial neglect on a quantitative measure of the activities of daily living during spontaneous behaviour. We applied the Catherine Bergego Scale, a standardized observation questionnaire that can validly and reliably detect the presence and severity of spatial neglect during the activities of daily living. Eight trains of continuous theta burst stimulation were applied over two consecutive days on the contralesional, left posterior parietal cortex in patients suffering from subacute left spatial neglect, in a randomized, double-blind, sham-controlled design, which also included a control group of neglect patients without stimulation. The results showed a 37% improvement in the spontaneous everyday behaviour of the neglect patients after the repeated application of continuous theta burst stimulation. Remarkably, the improvement persisted for at least 3 weeks after stimulation. The amelioration of spatial neglect symptoms in the activities of daily living was also generally accompanied by significantly better performance in the neuropsychological tests. No significant amelioration in symptoms was observed after sham stimulation or in the control group without stimulation. These results provide Class I evidence that continuous theta burst stimulation is a viable add-on therapy in neglect rehabilitation that facilitates recovery of normal everyday behaviour.

Mechanisms of nanoparticle-mediated photomechanical cell damage

Laser-assisted killing of gold nanoparticle targeted macrophages was investigated. Using pressure transient detection, flash photography and transmission electron microscopy (TEM) imaging, we studied the mechanism of single cell damage by vapor bubble formation around gold nanospheres induced by nanosecond laser pulses. The influence of the number of irradiating laser pulses and of particle size and concentration on the threshold for acute cell damage was determined. While the single pulse damage threshold is independent of the particle size, the threshold decreases with increasing particle size when using trains of pulses. The dependence of the cell damage threshold on the nanoparticle concentration during incubation reveals that particle accumulation and distribution inside the cell plays a key role in tissue imaging or cell damaging.

Panel 2: Rescue and Escape from the Holocaust

Panel 2: Rescue and Escape from the Holocaust Nina Paulovicova, University of Alberta, Canada: “The Silenced Phenomenon of Cross-National Rescue: 'Leaking Border' and Paid Smugglers” Download Paper (login required) Tomasz Frydel, University of Toronto: "Rescue or Denunciation of Jews? A Case Study of Southeastern Poland during German Occupation" Download Paper (login required) Tanja von Fransecky, Technical University, Berlin, Germany: "Escape and Attempted Escape of Jewish Deportees from Deportation Trains in France, Belgium and the Netherlands” Download Paper (login required) Chair: Adara Goldberg and Elizabeth Anthony, Clark UniversityComment: Deborah Dwork, Clark University

Repetitive transcranial magnetic stimulation of the dorsolateral prefrontal cortex affects divided attention immediately after cessation of stimulation

Transcranial magnetic stimulation has evolved into a powerful neuroscientific tool allowing to interfere transiently with specific brain functions. In addition, repetitive TMS (rTMS) has long-term effects (e.g. on mood), probably mediated by neurochemical alterations. While long-term safety of rTMS with regard to cognitive functioning is well established from trials exploring its therapeutic efficacy, little is known on whether rTMS can induce changes in cognitive functioning in a time window ranging from minutes to hours, a time in which neurochemical effects correlated with stimulation have been demonstrated. This study examined effects of rTMS on three measures of executive function in healthy subjects who received one single rTMS session (40 trains of 2 s duration 20 Hz stimuli) at the left dorsolateral prefrontal cortex (DLPFC). Compared to a sham condition one week apart, divided attention performance was significantly impaired about 30-60 min after rTMS, while Stroop-interference and performance in the Wisconsin Card Sorting Test was unaffected after rTMS. Repetitive TMS of the left DLPFC, at stimulation parameters used in therapeutic studies, does not lead to a clinically relevant impairment of executive function after stimulation. However, the significant effect on divided attention suggests that cognitive effects of rTMS are not limited to the of acute stimulation, and may possibly reflect known neurochemical alterations induced by rTMS. Sensitive cognitive measures may be useful to trace those short-term effects of rTMS non-invasively in humans.