Avaliação da função renal de cães sob dois protocolos para administração da cisplatina

OBJETIVO: Avaliar a função renal de cães sadios, sob dois protocolos para administração de cisplatina. MÉTODOS: Todos os animais foram submetidos a três sessões de quimioterapia com cisplatina (60mg/m², iv) a intervalos de 21 dias. Foi realizada fluidoterapia com solução de cloreto de sódio a 0,9%, (25mL/kg/hora,iv), durante duas horas e, após administração de cisplatina, por mais uma hora. Os animais do grupo 2 receberam furosemida (2mg/kg, iv) 20 minutos antes da administração da cisplatina. A avaliação da função renal foi feita por exame clinico, urinálise, concentrações séricas de uréia e creatinina, clearance de creatinina, excreção fracionada de sódio e de potássio e razão proteína: creatinina urinária. As avaliações foram feitas imediatamente antes e 1, 2, 5, e 21 dias após cada uma das três sessões de quimioterapia. RESULTADOS: Mantiveram-se dentro da normalidade, não sendo detectados sinais de lesões ou insuficiência renal. Os animais que não receberam furosemida sofreram aumento gradativo nas concentrações séricas de creatinina e diminuição no clearance da mesma. CONCLUSÃO: O regime de fluidoterapia empregado mostra ser efetivo em minimizar a ação nefrotóxica da cisplatina e benefício adicional importante é obtido pela administração de furosemida.

Variação das características físico-químicas e microbiológicas das salmouras empregadas na salga de queijos tipo mussarela durante o período de sua utilização

Foram analisadas 40 amostras de salmouras empregadas na salga por submersão de queijos tipo mussarela, em uma indústria de laticínios do Estado de São Paulo, Brasil, com o objetivo de se conhecer a variação das características físico-químicas e microbiológicas durante o período de sua utilização. Os valores médios do pH, concentração de cloreto de sódio e de proteínas solúveis, desde o preparo da salmoura até o 21° dia de utilização, variaram de 7,21 a 5,76, 27,1 a 24,5 e de zero a 0,126 mg/ml, respectivamente. Por outro lado, os valores médios das contagens de microrganismos mesófilos e do número mais provável de coliformes totais e de origem fecal variaram de 5,8 x 10 UFC/ml a 6,9 x 10(4) UFC/ml, zero a 1,6 x 10(5)/100ml e zero a 1,1 x 10(5)/100ml, respectivamente. Além disso, os valores médios das contagens de bolores e leveduras e de Staphylococcus coagulase positiva, variaram de 0,4 x 10 UFC/ml a 2,0 x 10³ UFC/ml e de zero a 1,3 x 10 UFC/ml, respectivamente. Os resultados encontrados sugerem a existência de condições higiênicas inadequadas durante o preparo e utilização das salmouras, de modo a representar uma importante fonte de contaminação para os queijos. em decorrência deste fato, existe a possibilidade do comprometimento da qualidade dos queijos, de modo a representar risco potencial à população consumidora.

Respostas fisiológicas de estresse no matrinxã (Brycon amazonicus) após exercício físico intenso durante a captura

Para determinar as respostas de estresse do matrinxã após perseguição com puçá, juvenis (26,7±6,7 g) foram aclimatados em caixas plásticas e submetidos aos tratamentos: Controle (sem perseguição), Perseguição por 2 minutos, Perseguição por 5 minutos, Perseguição por 10 minutos (quatro repetições, N=8/tratamento). Amostras de sangue foram coletadas 15, 30 e 60 minutos após a perseguição para determinação do cortisol, glicose, sódio, cloreto, potássio, hematócrito, hemoglobina, número total de eritrócitos e osmolaridade. O perfil das respostas após o exercício físico dos peixes não mostrou as alterações típicas do estresse. Até 60 minutos após o estímulo, não ocorreram alterações nos níveis sanguíneos de cortisol, glicose e potássio nos peixes dos diferentes tratamentos. Os níveis de cloreto foram reduzidos 15 minutos após a natação forçada, enquanto os níveis do sódio mais baixos foram registrados 60 minutos depois. Houve redução da osmolaridade a partir dos 30 minutos após o estímulo, independente do tempo de perseguição. A natação forçada não interferiu nos indicadores hematológicos, corroborando os outros indicadores usados. Dessa forma, o exercício intenso dos peixes por até 10 minutos não foi estímulo suficiente para gerar respostas de estresse, sugerindo que o matrinxã é bastante resistente ao manejo de criação.

Infecção experimental em suínos jovens com Leptospira interrogans sorovar wolffi: determinação de parâmetros bioquímicos

Um estudo sobre infecção experimental foi realizado em oito suínos, com idade média de 90 dias, machos castrados, da raça Wessex, e distribuídos em dois grupos de quatro suínos cada. Durante 36 dias, foram analisadas as alterações bioquímicas nos soros dos suínos dos dois grupos. O Grupo I foi mantido como testemunho e recebeu 5,0mL de solução fisiológica estéril por via intravenosa (veia cava craniana) e, no Grupo II, os suínos foram inoculados pela mesma via com 5,0mL de cultura de Leptospira interrogans sorovar wolffi , amostra L-10 selvagem isolada de tatu (Dasypus novemcinctus), contendo 1,0 x 10(8) leptospiras/mL. A partir do terceiro dia após a inoculação e em intervalos de 72 horas até o décimo oitavo dia, foram feitas coletas de sangue, sem anticoagulante, dos animais inoculados e testemunhas. Os parâmetros bioquímicos analisados foram: bilirrubina total, direta e indireta, ácidos graxos, glicose e proteínas plasmáticas. Foi detectado um aumento da bilirrubina direta no terceiro dia e um aumento no sexto dia da bilirrubina total e indireta após a inoculação. As dosagens de glicose, ácidos graxos e proteínas plasmáticas apresentaram uma diminuição a partir do terceiro dia da inoculação. Com os resultados obtidos, pode-se concluir que o aumento das taxas de bilirrubinas levam a uma definição de um diagnóstico de hemólise aguda, e que a hipoglicemia, a hipolipidemia e a hipoproteinemia podem estar relacionadas com lesões hepáticas e a uma septcemia.Todas as dosagens em todos os animais retornaram aos seus valores normais a partir do décimo quinto dia.

Efeitos das fontes e níveis de sódio, cloro e potássio e da relação (Na + K)/Cl, sobre o desempenho e características do plasma sangüíneo de poedeiras comerciais

Dois experimentos foram realizados para estudar os efeitos da relação (Na + K)/Cl na dieta de poedeiras comerciais no final do ciclo de postura, pela adição de bicarbonato de sódio (NaHCO3), cloreto de sódio (NaCl), cloreto de potássio (KCl) e cloreto de amônia (NH4Cl), avaliando-se os parâmetros produtivos e características do plasma sangüíneo. O primeiro experimento envolveu cinco tratamentos: 0,30% de NaCl; 0,30% de NaCl + 0,95% de NaHCO3; 0,38% de KCl + 0,67% de NaHCO3; 0,38% de KCl + 1,62% de NaHCO3; e 0,38% de KCL + 2,56% de NaHCO3. A relação (Na + K)/Cl foi, respectivamente, 3,46; 4,46; 4,46; 5,46; e 6,46. O segundo experimento envolveu quatro tratamentos: 0,30% NaCl; 0,47% de NaHCO3 + 0,19 de NH4Cl; 1,17% NaHCO3 + 0,19% de NH4Cl; e 1,88% de NaHCO3 + 0,19% de NH4Cl. A relação (Na + K)/Cl foi 3,46; 4,46; 5,46; e 6,46, respectivamente. No primeiro experimento, o maior consumo alimentar foi observado nas aves alimentadas com dietas contendo 0,30% de NaCl. As aves que consumiram KCl apresentaram melhor conversão alimentar. Foi observado aumento no fósforo e pH do plasma sangüíneo. Aves que receberam dietas em que a relação (Na +K)/Cl foi de 5,46 apresentaram maiores níveis de fósforo no plasma sangüíneo. O aumento do pH no plasma sangüíneo foi observado em aves que receberam dietas com relações de (Na + K)/Cl de 4,46 e 6,46. No segundo experimento, o peso do ovo diminuiu com o aumento do NaHCO3 da dieta.

Níveis de cloreto de sódio para aves de corte da linhagem Colonial criadas em semiconfinamento

Objetivou-se determinar níveis de inclusão de cloreto de sódio (NaCl) em rações para aves machos e fêmeas da linhagem Colonial nas fases inicial (1 a 28 dias), de crescimento (28 a 56 dias) e final (56 a 84 dias) criadas em semiconfinamento. em cada ensaio, 480 aves com idade correspondente à fase de criação foram alojadas em 24 unidades experimentais contendo áreas de abrigo e de pastejo. O delineamento experimental utilizado foi o inteiramente casualizado, em esquema fatorial 4 × 2 (níveis de NaCl e sexos), totalizando oito tratamentos e três repetições de 20 aves. Os níveis de NaCl avaliados foram: 0,20; 0,40; 0,60 e 0,80% na fase inicial; 0,10; 0,30; 0,50 e 0,70% na fase de crescimento e 0,10; 0,25; 0,40 e 0,55% na fase final. Foram avaliados o ganho de peso, o consumo de ração, a ingestão de água, a conversão alimentar, o potencial hidrogeniônico, a pressão parcial de gás carbônico no sangue, a concentração de hematócritos e os teores de sódio e cloro no sangue. Para a fase inicial, o nível recomendado é de 0,53% de NaCl na ração para aves de ambos os sexos. Para a fase de crescimento, os níveis de 0,40 e 0,43% de NaCl, respectivamente, para machos e fêmeas e, para a fase final, de 0,25% para aves de ambos os sexos, atendem às exigências nutricionais.

Fontes de Sódio e Relação Sódio: Cloro para Frangos de Corte

Foram utilizados 2.880 pintos de corte, para avaliar os efeitos de diferentes fontes de sódio (Na+) e relações sódio:cloro (Na+:Cl-) na ração. As aves receberam ração e água ad libtum. O delineamento experimental foi inteiramente casualizado, com quatro tratamentos e seis repetições. O ganho de peso, consumo de ração, conversão alimentar e mortalidade não foram influenciados (p>0,05) pela substituição da fonte tradicional de Na e pelas diferentes relações Na:Cl. A umidade da cama foi afetada pela fonte e níveis de Na na ração. Os resultados mostraram que pode-se utilizar o NaHCO3 como fonte parcial à exigência de Na para frangos de corte de 1 a 47 dias de idade.

Testes de vigor utilizados na avaliação da qualidade fisiológica de lotes de sementes de milho-doce (sh2)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Degradação fotoquímica de hidrocarbonetos da gasolina em efluentes aquosos

Photo-oxidation processes of toxic organic compounds have been widely studied. This work seeks the application of the photo-Fenton process for the degradation of hydrocarbons in water. The gasoline found in the refinery, without additives and alcohol, was used as the model pollutant. The effects of the concentration of the following substances have been properly evaluated: hydrogen peroxide (100-200 mM), iron ions (0.5-1 mM) and sodium chloride (200 2000 ppm). The experiments were accomplished in reactor with UV lamp and in a falling film solar reactor. The photo-oxidation process was monitored by measurements of the absorption spectra, total organic carbon (TOC) and chemical oxygen demand (COD). Experimental results demonstrated that the photo-Fenton process is feasible for the treatment of wastewaters containing aliphatic hydrocarbons, inclusive in the presence of salts. These conditions are similar to the water produced by the petroleum fields, generated in the extraction and production of petroleum. A neural network model of process correlated well the observed data for the photooxidation process of hydrocarbons

Estudo da reidratação do feijão verde (Vigna unguiculata L. Walp) desidratado por micro-ondas com e sem pré-tratamento osmótico

The green bean has organoleptic and nutritional characteristics that make it an important food source in tropical regions such as the Northeast of Brazil. It is a cheap source of protein and important for nutrition of rural population contributing significantly in subsistence farming of the families from Brazil s northeast. It is consumed in entire region and together with the dry meat and other products composes the menu of typical restaurants, being characterized as an important product for economy of Northeast. The green bean is consumed freshly harvested and has short cycle, being characterized as a very perishable food, which hampers your market. The drying method is an alternative to increase the lifetime and provide a reduction volume of this product making easier your transportation and storage. However is necessary to search ways of drying which keep the product quality not only from the nutritional standpoint but also organoleptic. Some characteristics may change with the drying process such as the coloring, the rehydration capacity and the grains cooking time. The decrease of drying time or of exposure of the grains to high temperature minimizes the effects related with the product quality loss. Among the techniques used to reduce the drying time and improve some characteristics of the product, stands out the osmotic dehydration, widely used in combined processes such as the pretreatment in drying food. Currently the use of the microwaves has been considered an alternative for drying food. The microwave energy generates heat inside of materials processed and the heating is practically instantaneous, resulting in shorter processing times and product quality higher to that obtained by conventional methods. Considering the importance of the green beans for the Northeast region, the wastefulness of production due to seasonality of the crop and your high perishability, the proposal of this thesis is the study of drying grain by microwaves with and without osmotic pretreatment, focusing on the search of conditions of processes which favor the rehydration of the product preserving your organoleptic characteristics. Based on the analysis of the results of osmotic dehydration and dielectric properties was defined the operating condition to be used in pretreatment of the green bean, with osmotic concentration in saline solution containing 12,5% of sodium chloride, at 40°C for 20 minutes. The drying of green bean by microwave was performed with and without osmotic pretreatment on the optimized condition. The osmotic predehydration favored the additional drying, reducing the process time. The rehydration of dehydrated green bean with and without osmotic pretreatment was accomplished in different temperature conditions and immersion time according to a factorial design 22, with 3 repetitions at the central point. According to results the better condition was obtained with the osmotically pretreated bean and rehydrated at a temperature of 60°C for 90 minutes. Sensory analysis was performed comparing the sample of the green bean in natura and rehydrated in optimized conditions, with and without osmotic pretreatment. All samples showed a good acceptance rate regarding the analyzed attributes (appearance, texture, color, odor and taste), with all values above 70%. Is possible conclude that the drying of green bean by microwave with osmotic pretreatment is feasible both in respect to technical aspects and rehydration rates and sensory quality of the product

Recombinant expression of glycerol-3-phosphate dehydrogenase using the Pichia pastoris system

In the present study, the GPD2 gene from Saccharomyces cerevisiae, which codifies for the enzyme glycerol-3-phosphate dehydrogenase (GPDH), was cloned from the pPICZ-alpha expression vector and used with the purpose of inducing the extracellular expression of the glycerol-3-phosphate dehydrogenase under the control of the methanol-regulated AOX promoter. The presence of the GPD2 insert was confirmed by PCR analysis. Pichia pastoris X-33 (Mut(+)) was transformed with linearized plasmids by electroporation and transformants were selected on YPDS plates containing 100 mu g/mL of zeocin. Several clones were selected and the functionality of this enzyme obtained in a culture medium was assayed. Among the mutants tested, one exhibited 3.1 x 10(-2) U/mg of maximal activity. Maximal enzyme activity was achieved at 6 days of growth. Medium composition and pre-induction osmotic stress influenced protein production. Pre-induction osmotic stress (culturing cells in medium with either 0.35 M sodium chloride or 1.0 M sorbitol for 4h prior to induction) led to an increase in cell growth with sorbitol and resulted in a significant increase in GPDH productivity with sodium chloride in 24h of induction approximately fivefold greater than under standard conditions (without pre-induction). (C) 2010 Elsevier B.V. All rights reserved.

Qualidade fisiológica de sementes de genótipos de algodoeiro sob estresse salino

The germination of cotton seeds and the seedlings emergency are generally delayed and reduced by the salinity. Although the cotton is considered a tolerant culture, it can suffer substantial reductions in regarding its growth and production when exposed to salinity condition. The aims of this study went evaluate the effect of the saline stress in the germination phase to four cotton genotypes (BRS Rubi, BRS Safira, BRS 201 and CNPA 187 8H), using different osmotic potentials generated with increment of sodium chloride (NaCl). The saline stress was simulated using NaCl aqueous solutions in the potentials: 0.0 (Control); -0.2; -0.4; -0.6; -0.8 and -1.0 MPa. The treatments were monitored by means of tests for analysis of seeds, germination, first counting, speed germination index, length of shoot, radicle length, dry weigth of embrionic axis and shoot/radicle ratio. The tests for germination, first counting and index of germination speed were accomplished using 50 seeds for repetition and for the study of length of shoot, radicle length, dry weigth of embrionic axis and shoot/radicle ratio were used 20 seeds by repetition. For both tests four repetitions were accomplished by genotype for each one of the potentials. The seeds of each repetition were involved in papers Germitest humidified with NaCl solution corresponding to the potential. The repetitions of both tests were maintained in a germinator with saturated humidity. The analysis were initiate four days after the induction of the saline stress. The evaluations of the first three variables analyzed were accomplished daily; the seeds were remove and counted when its germinated. For the length tests just the repetitions corresponding to the potential of NaCl 0,0 MPa were analysis 4 days after the beginning of the induction of the saline stress. The analysis of the repetitions of the potentials -0,2 and -0,4 and of the potentials -0,6, -0,8 and -1,0 MPa they were accomplished with 12 and 20 days, respectively. For accomplishment of the analisis of this test the shoot of the 20 plantules of each repetition was separate from the radicle and both parts were measured. The statistical analyses were performed using the GENMOD and GLM procedures of the SAS. For the variable germination, the cultivates CNPA 187 8H and BRS Safira stood out for the potential -0.8 MPa, with averages of 89% and 81%, respectively. The test of speed germination index to cultivate BRS Safira presented the largest averages for the two higher saline potentials. It was observed that the increase of the saline potential reduces the germination percentage and speed germination index. For each day of evaluation it was verified that the increase of the saline potential causes a reduction of the length both of the shoot and of the radicle. The radicle tends to grow more than the shoot until the potential -0,4 MPa

Qualitative and quantitative characterization of aluminium alloys after corrosion testing

The 2024 and 7050 aluminium alloys used as aircraft components were subjected to laboratory corrosion tests in sodium chloride solution, Light-microscope examinations make it possible to characterise morphological aspects of the localised corrosion. Image analysis was used to determine both depth and width of pits over corroded surfaces. It has been concluded that the annealing could reduce the pit growth in both alloys, by means of grains recrystallization or recovery. The 2024 alloy also tends to present an exfoliation mechanism, mainly throughout non-recrystallized and recrystallized grain boundaries, increasing the width and sustaining the depth of pit cavities during exposition to saline atmosphere. SEM and EDS analysis reveal the morphology and elemental distribution of the corrosion products formed after immersion corrosion test. Some of these products were identified by X-ray diffraction analysis. For 2024, Al(OH)(3), MS(OH)(2) and Cu2O were found. AI(OH)(3) and Cu2O were also found in 7050 samples.

Análise bromatológica de carnes antes e após o processamento para obtenção de charque

The process of salting and drying in the sun is used to preserve meat since the beginning of civilization. There is evidence that this preservation technique has arisen in Egypt, between 4,000 and 5,000 years ago. In our country, according to literature, was the first industrial product that gave the appearance of beef jerky, beef being produced, where about 70% to 75% of the muscle is composed of water, where it will be around 45% as a final product, according to the law in his article RIISPOA No. 432 provides that the jerky should contain no more than this amount of moisture in the muscular portion, or more than 15% of total ash with tolerance of up to 5% variation . Besides this parameter, proteins, lipids, ash, and minerals were analyzed in samples before and after the manufacturing process to know the content of these nutrients. Since these are considered important in product quality, thus the concentration in these samples, respectively, in the flesh Front (CD and CHD) before and after the manufacturing process for humidity were respectively 75.28% and 47.38% , the protein was 14.17 and 22.20 g / 100 g sample, 6.360 and 4.251 of lipids g/100g of the sample, and the ashes 0.974 9.144 g/100g sample, minerals like calcium and 4.074 30 , 06 ppm, sódio0, 055 and 5.401 g / L, sodium chloride, 0.139 and 13.74 g / L, potassium 237.5 and 166.8 ppm, 1.721 and 3.295 ppm iron, 0.143 and 0.135 ppm phosphorus, zinc and 4.690 6.905 ppm; magnésio14, 63 e13, 75 ppm manganese .017 e0, 007ppm, copper 0.057 and 0.039 ppm in the case of needle-type meat (CPA and CHPA), 68.04% and 44.17%, protein 13 , 72, and 24.42 g/100g of sample, 1.137 in the ash and 12.68 g / 100g of sample, and the minerals calcium 17.11 and 12.89 ppm; sódio0, 123 and 4.871 g / L, sodium chloride 0.312 and 12.39 g / L, potassium 305.3 and 182.1 ppm; ferro1, 817 and 1.513 ppm, 0.273 and 0.139 ppm phosphorus, zinc 6.305 and 4.783 ppm, 27.95 and 15.85 ppm magnesium, manganese and 0.025 0.011 ppm, 0.057 and 0.143 ppm copper and chromium 0.014 and 0.068 ppm

Interações entre a carboximetilcelulose, carbonato de cálcio e bentonita: repercussões sobre as propriedades dos fluidos de perfuração aquosos

The role of carboxymethylcellulose (CMC) in association to calcium carbonate particles (CaCO3) in most water-based drilling fluids is to reduce the fluid loss to the surrounding formation. Another essential function is to provide rheological properties capable of maintaining in suspension the cuttings during drilling operation. Therefore, it is absolutely essential to correlate the polymer chemical structure (degree of substitution, molecular weight and distribution of substituent) with the physical-chemical properties of CaCO3, in order to obtain the better result at lower cost. Another important aspect refers to the clay hydration inhibitive properties of carboxymethylcellulose (CMC) in drilling fluids systems. The clay swelling promotes an undesirable damage that reduces the formation permeability and causes serious problems during the drilling operation. In this context, this thesis consists of two main parts. The first part refers to understanding of interactions CMC-CaCO3, as well as the corresponding effects on the fluid properties. The second part is related to understanding of mechanisms by which CMC adsorption occurs onto the clay surface, where, certainly, polymer chemical structure, ionic strength, molecular weight and its solvency in the medium are responsible to affect intrinsically the clay layers stabilization. Three samples of carboximetilcellulose with different molecular weight and degree of substitution (CMC A (9 x 104 gmol DS 0.7), CMC B (2.5 x 105 gmol DS 0.7) e CMC C (2.5 x 105 gmol DS 1.2)) and three samples of calcite with different average particle diameter and particle size distribution were used. The increase of CMC degree of substitution contributed to increase of polymer charge density and therefore, reduced its stability in brine, promoting the aggregation with the increase of filtrate volume. On the other hand, the increase of molecular weight promoted an increase of rheological properties with reduction of filtrate volume. Both effects are directly associated to hydrodynamic volume of polymer molecule in the medium. The granulometry of CaCO3 particles influenced not only the rheological properties, due to adsorption of polymers, but also the filtration properties. It was observed that the lower filtrate volume was obtained by using a CaCO3 sample of a low average size particle with wide dispersion in size. With regards to inhibition of clay swelling, the CMC performance was compared to other products often used (sodium chloride (NaCl), potassium chloride (KCl) and quaternary amine-based commercial inhibitor). The low molecular weight CMC (9 x 104 g/mol) showed slightly lower swelling degree compared to the high molecular weight (2.5 x 105 g/mol) along to 180 minutes. In parallel, it can be visualized by Scanning Electron Microscopy (SEM) that the high molecular weight CMC (2.5 x 105 g/mol e DS 0.7) promoted a reduction in pores formation and size of clay compared to low molecular weight CMC (9.0 x 104 g/mol e DS 0.7), after 1000 minutes in aqueous medium. This behavior was attributed to dynamic of interactions between clay and the hydrodynamic volume of CMC along the time, which is result of strong contribution of electrostatic interactions and hydrogen bounds between carboxylate groups and hydroxyls located along the polymer backbone and ionic and polar groups of clay surface. CMC adsorbs on clay surface promoting the skin formation , which is responsible to minimize the migration of water to porous medium. With the increase of degree of substitution, it was observed an increase of pores onto clay, suggesting that the higher charge density on polymer is responsible to decrease its flexibility and adsorption onto clay surface. The joint evaluation of these results indicate that high molecular weight is responsible to better results on control of rheological, filtration and clay swelling properties, however, the contrary effect is observed with the increase of degree of substitution. On its turn, the calcite presents better results of rheological and filtration properties with the decrease of average viii particle diameter and increase of particle size distribution. According to all properties evaluated, it has been obvious the interaction of CMC with the minerals (CaCO3 and clay) in the aqueous medium