Adaptation of rainbow fish to lake and stream habitats

Fish occupy a range of hydrological habitats that exert different demands on locomotor performance. We examined replicate natural populations of the rainbow fishes Melanotaenia eachamensis and M. duboulayi to determine if colonization of low-velocity (lake) habitats by fish from high-velocity (stream) habitats resulted in adaptation of locomotor morphology and performance. Relative to stream conspecifics, lake fish had more posteriorly positioned first dorsal and pelvic fins, and shorter second dorsal fin bases. Habitat dimorphism observed between wild-caught fish was determined to be heritable as it was retained in M. eachamensis offspring raised in a common garden. Repeated evolution of the same heritable phenotype in independently derived populations indicated body shape divergence was a consequence of natural selection. Morphological divergence between hydrological habitats did not support a priori expectations of deeper bodies and caudal peduncles in lake fish. However, observed divergence in fin positioning was consistent with a family-wide association between habitat and morphology, and with empirical studies on other fish species. As predicted, decreased demand for sustained swimming in takes resulted in a reduction in caudal red muscle area of lake fish relative to their stream counterparts. Melanotaenia duboulayi lake fish also had slower sustained swimming speeds (U-crit) than stream conspecifics. In M. eachamensis, habitat affected U-crit of males and females differently. Specifically, females exhibited the pattern observed in M. duboulayi (lake fish had faster U-crit than stream fish), but the opposite association was observed in males (stream males had slower Ucrit than lake males). Stream M. eachamensis also exhibited a reversed pattern of sexual dimorphism in U-crit (males slower than females) relative to all other groups (males faster than females). We suggest that M. eachamensis males from streams responded to factors other than water velocity. Although replication of muscle and U,,it phenotypes across same habitat populations within and/or among species was suggestive of adaptation, the common garden experiment did not confirm a genetic basis to these associations. Kinematic studies should consider the effect of the position and base length of dorsal fins.

Slurry flow in mills: grate-only discharge mechanism (Part-1)

Discharge grates play an important role in determining the performance of autogenous, semi-autogenous and grate discharge ball mills. The flow capacity (grinding capacity) of these mills is strongly influenced by the discharge grate design-open area and position of apertures, as well as the performance of the pulp lifters. As mill sizes have progressively increased and closed-circuiting has become more popular the importance of grate and pulp lifter design has grown. Unfortunately very few studies have concentrated on this aspect of mill performance. To remedy this a series of laboratory and pilot-scale tests were undertaken to study both the performance of grates on their own and in conjunction with pulp lifters. In this first paper of a two-part series the results from the grate-only experiments are presented and discussed, whilst the performance of the grate-pulp-lifter system is covered in the second paper. The results from the grate-only experiments have shown that the build-up of slurry (hold-up) inside the mill starts from the shoulder of the charge, while the toe position of the slurry progressively moves towards the toe of the charge with increasing flowrate. Besides grate design (open area and position of apertures), charge volume and mill speed were also found to have a strong influence on mill hold-up and interact with grate design variables. (C) 2003 Elsevier Science Ltd. All rights reserved.

Measuring range of active cervical rotation in a position of full head flexion using the 3D Fastrak measurement system: an intra-tester reliability study

Most external assessments of cervical range of motion assess the upper and lower cervical regions simultaneously. This study investigated the within and between days reliability of the clinical method used to bias this movement to the upper cervical region, namely measuring rotation of the head and neck in a position of full cervical flexion. Measurements were made using the Fastrak measurement system and were conducted by one operator. Results indicated high levels of within and between days repeatability (range of ICC2,1 values: 0.85-0.95). The ranges of axial rotation to right and left, measured with the neck positioned in full flexion, were approximately 56% and 50%, respectively of total cervical rotation, which relates well to the proportional division of rotation in the upper and lower cervical regions. These results suggest that this method of measuring rotation would be appropriate for use in subject studies where movement dysfunction is present in the upper cervical region, such as those with cervicogenic headache. (C) 2003 Elsevier Science Ltd. All rights reserved.

Existence of multiple solutions for finite difference approximations to second-order boundary value problems

Error condition detected We consider discrete two-point boundary value problems of the form D-2 y(k+1) = f (kh, y(k), D y(k)), for k = 1,...,n - 1, (0,0) = G((y(0),y(n));(Dy-1,Dy-n)), where Dy-k = (y(k) - Yk-I)/h and h = 1/n. This arises as a finite difference approximation to y" = f(x,y,y'), x is an element of [0,1], (0,0) = G((y(0),y(1));(y'(0),y'(1))). We assume that f and G = (g(0), g(1)) are continuous and fully nonlinear, that there exist pairs of strict lower and strict upper solutions for the continuous problem, and that f and G satisfy additional assumptions that are known to yield a priori bounds on, and to guarantee the existence of solutions of the continuous problem. Under these assumptions we show that there are at least three distinct solutions of the discrete approximation which approximate solutions to the continuous problem as the grid size, h, goes to 0. (C) 2003 Elsevier Science Ltd. All rights reserved.

Development of a more efficient classifying cyclone

A more efficient classifying cyclone (CC) for fine particle classification has been developed in recent years at the JKMRC. The novel CC, known as the JKCC, has modified profiles of the cyclone body, vortex finder, and spigot when compared to conventional hydrocyclones. The novel design increases the centrifugal force inside the cyclone and mitigates the short circuiting flow that exists in all current cyclones. It also decreases the probability of particle contamination in the place near the cyclone spigot. Consequently the cyclone efficiency is improved while the unit maintains a simple structure. An international patent has been granted for this novel cyclone design. In the first development stage-a feasibility study-a 100 mm JKCC was tested and compared with two 100 min commercial units. Very encouraging results were achieved, indicating good potential for the novel design. In the second development stage-a scale-up stage-the JKCC was scaled up to 200 mm in diameter, and its geometry was optimized through numerous tests. The performance of the JKCC was compared with a 150 nun commercial unit and exhibited sharper separation, finer separation size, and lower flow ratios. The JKCC is now being scaled up into a fill-size (480 mm) hydrocyclone in the third development stage-an industrial study. The 480 mm diameter unit will be tested in an Australian coal preparation plant, and directly compared with a commercial CC operating under the same conditions. Classifying cyclone performance for fine coal could be further improved if the unit is installed in an inclined position. The study using the 200 mm JKCC has revealed that sharpness of separation improved and the flow ratio to underflow was decreased by 43% as the cyclone inclination was varied from the vertical position (0degrees) to the horizontal position (90degrees). The separation size was not affected, although the feed rate was slightly decreased. To ensure self-emptying upon shutdown, it is recommended that the JKCC be installed at an inclination of 75-80degrees. At this angle the cyclone performance is very similar to that at a horizontal position. Similar findings have been derived from the testing of a conventional hydrocyclone. This may be of benefit to operations that require improved performance from their classifying cyclones in terms of sharpness of separation and flow ratio, while tolerating slightly reduced feed rate.

Respiratory health effects of cannabis: Position statement of the Thoracic Society of Australia and New Zealand

Both the gaseous and the particulate phases of tobacco and cannabis smoke contain a similar range of harmful chemicals. However, differing patterns of inhalation mean that smoking a 'joint' of cannabis results in exposure to significantly greater amounts of combusted material than with a tobacco cigarette. The histopathological effects of cannabis smoke exposure include changes consistent with acute and chronic bronchitis. Cellular dysplasia has also been observed, suggesting that, like tobacco smoke, cannabis exposure has the potential to cause malignancy. These features are consistent with the clinical presentation. Symptoms of cough and early morning sputum production are common (20-25%) even in young individuals who smoke cannabis alone. Almost all studies indicate that the effects of cannabis and tobacco smoking are additive and independent. Public health education should dispel the myth that cannabis smoking is relatively safe by highlighting that the adverse respiratory effects of smoking cannabis are similar to those of smoking tobacco, even although it remains to be confirmed that smoking cannabis alone leads to the development of chronic lung disease.

Synthesis and characterization of mono- and bis-ligand zinc(II) and cadmium(II) complexes of the di-2-pyridylketone Schiff base of S-benzyl dithiocarbazate (Hdpksbz) and the X-ray crystal structures of the [Zn(dpksbz)2] and [Cd(dpksbz)NCS]2 complexes

New mono- and bis-chelated zinc(II) and cadmium(II) complexes of formula, [M(dpksbz)NCS] (dpksbz = anionic form of the di-2-pyridylketone Schiff base of S-benzyldithiocarbazate) and [M(dpksbz)(2)] (M = Zn-II, Cd-II) have been prepared and characterized. The structure of the bis-ligand complex, [Zn(dpksbZ)(2)] has been determined by X-ray diffraction. The complex has a distorted octahedral geometry in which the ligands are coordinated to the zinc(II) ion as uninegatively charged tridentate chelates via the thiolate sulfur atoms, the azomethine nitrogen atoms and the pyridine nitrogen atoms. The distortion from a regular octahedral geometry is attributed to the restricted bite angles of the Schiff base ligands. X-ray structural analysis shows that the [Cd(dpksbz)NCS](2) complex is a centrosymmetric dimer in which each of the cadmium(II) ions adopts a five-coordinate, approximately square-pyramidal configuration with the Schiff base acting as a tetradentate chelating agent coordinating a cadmium(II) ion via one of the pyridine nitrogen atoms, the azomethine nitrogen atom and the thiolate sulfur atom; the second pyridine nitrogen atom is coordinated to the other cadmium(II) ion of the dimer. The fifth coordination position around each cadmium(II) is occupied by an N-bonded thiocyanate ligand. (C) 2003 Elsevier Science Ltd. All rights reserved.

Basis set convergence in Hartree-Fock calculations of some diatomic molecules containing first and second-row atoms

Investiga-se a convergência de conjuntos de bases em direção ao limite numérico da energia Hartree-Fock (HF) total para as seqüências hierárquicas dos conjuntos de bases XZP e ccpVXZ. Para as duas hierarquias, melhoramentos significativos são obtidos com cada incremento em X. Para estimar o limite do conjunto de base completo, uma forma exponencial foi usada. Entre as várias aproximações consideradas aqui, uma extrapolação exponencial de três parâmetros aplicada aos resultados TZP, QZP e 5ZP deu os limites do conjunto de bases mais precisos. Em adição, energias HF dos orbitais moleculares ocupados mais altos de algumas moléculas diatômicas foram calculadas com o conjunto 5ZP e comparadas com as correspondentes obtidas com o conjunto cc-pV5Z e com um método numérico HF.

Filogenia e evolução de roedores Echimyidae na Mata Atlântica

Os roedores Echimyidae tem distribuição Neotropical e são a família mais diversa de roedores Caviomorpha. Apesar da grande diversidade, pouco se sabe sobre a distribuição geográfica, história natural e evolução de vários grupos de equimídeos. O histórico taxonômico dessa família é confuso, sendo alguns grupos raramente coletados e, consequentemente, inferências sobre aspectos evolutivos e biológicos são pouco conclusivas e limitadas à análise de poucos exemplares. Filogenias moleculares não corroboram a classificação taxonômica para a família baseada em dados morfológicos, evidenciando a complexidade da história evolutiva desse grupo. Na Mata Atlântica são registrados cinco gêneros de Echimyidae: o rato-do-bambu, Kannabateomys; os arborícolas Phyllomys e Callistomys; o terrestre Trinomys, e o semi-fossorial Euryzygomatomys. O presente trabalho se baseou na utilização de sequências de DNA para abordar aspectos da evolução e filogenia de roedores equimídeos da Mata Atlântica em três níveis taxonômicos: família, gênero e espécie. O primeiro capítulo aborda a posição filogenética do gênero Callistomys dentro da família, utilizando sequências de 1 marcador mitocondrial (CitB) e 3 nucleares (GHR, RAG1 e vWF). Os resultados mostram que Callistomys forma um clado com o ratão-do-banhado (Myocastor), roedor semi-aquático das regiões abertas no cone sul da América do Sul e com o rato-de-espinho terrestre Proechimys com ocorrência na Amazônia. Esse clado é irmão de Thrichomys, um equimídeo terrestre que ocupa as áreas secas do centro da América do Sul. O agrupamento encontrado é inesperado, uma vez que seus membros apresentam aspectos morfológico, ecológicos e distribuição geográfica distintos e contrastantes. A filogenia resultante indica que Callistomys não é proximamente relacionado aos outros equimídeos arborícolas e sugere que o hábito arborícolas evoluiu mais de uma vez na família. O segundo capítulo investiga aspectos da filogenia, evolução e limites entre espécies de Phyllomys utilizando dois marcadores mitocondriais (CitB e COI) e três nucleares (GHR, RAG1 e vWF). Foram identificados três grupos principais de espécies: um com distribuição longitudinal pela porção central da Mata Atlântica (P. pattoni (P. mantiqueirensis, Phyllomys sp. 4)); e a partir daí dois outros grupos, um com distribuição na porção norte da Mata Atlântica (Phyllomys sp. 2 (P. blainvilii (P. brasiliensis, P. lamarum))); e outro na porção sul (Phyllomys sp. 3 ((Phyllomys sp. 1, P. lundi), (Phyllomys sp. 5 (P. dasythrix (P. nigrispinus (P. sulinus, Phyllomys sp. 6)))))). Foram identificadas duas linhagens independentes representando possíveis espécies novas, elevando o potencial número de espécies do gênero de 17 para 19. As filogenias associadas aos dados de distribuição geográfica sugerem que a diversificação e distribuição das espécies de Phyllomys foi influenciada pela ação conjunta de vários fatores como atividade neotectônica, gradientes altitudinais e latitudinais e mudanças climáticas que atuaram desde o Mioceno, marcando os primeiros eventos de diversificação do gênero até as especiações mais recentes, no Pleistoceno. O terceiro capítulo avalia a variação genética, distribuição geográfica e status taxonômico da espécie Euryzygomaotmys spinosus utilizando dois marcadores mitocondriais (CitB e D-loop). Os resultados mostraram que E.spinosus apresenta distribuição em áreas de Mata Atlântica e adjacências ao sul do Rio Doce, no Brasil, Paraguai e Argentina, incluindo um registro confirmado no Cerrado. A espécie ocupa habitats muito diversos e pode ser considerada generalista. As populações são geneticamente estruturadas ao longo da sua distribuição e os dados genéticos corroboram a taxonomia atual que considera apenas uma espécie, E. spinosus, para o gênero.

Conciliação entre formação esportiva e formação escolar : um estudo das seleções brasileiras masculinas de basquetebol de base

A pesquisa se caracteriza pela abordagem plurimetodológica do tipo qualitativa/quantitativa, e tem como objetivo investigar de que maneira se constroem as estratégias de conciliação entre a formação esportiva e escolar em atletas de elite que servem às seleções brasileiras masculinas de basquetebol Sub 17 e Sub 19. O estudo se organizou em três capítulos. Do tipo “estado do conhecimento”, o primeiro capítulo tem por objetivo mapear as produções acadêmicas que tratam da conciliação entre formação escolar e formação esportiva. Utiliza como fonte a base de dados Scielo para busca nacional e o Portal Periódicos Capes para busca internacional. Foram encontrados 17 artigos distribuídos em 13 periódicos. Os dados foram classificados/analisados por meio de indicadores bibliométricos, como distribuição anual, distribuição por revista, relação autoral e origem demográfica. Para análise também foram levados em consideração uma tese de doutorado, três dissertações de mestrado e três trabalhos apresentados em congresso, além de um número especial de periódico, não localizado nas bases escolhidas. Mostra que a preocupação com o tema surge na Europa e nos Estados Unidos, na década de 70, e que, no Brasil, essa questão passa a ser abordada nos anos 2000. Demonstra tentativas de conciliação entre as formações realizadas em países da Europa, Estados Unidos e Brasil, além da importância da família e do pertencimento de classes sociais na possibilidade de priorização a uma das formações envolvidas. O segundo capítulo, de natureza quali-quantitativa, investiga as estratégias utilizadas pelos atletas convocados em 2013 para as seleções brasileiras de basquetebol masculinas de base Sub 17 e Sub 19 anos, quanto às possíveis conciliações entre formação esportiva e escolar. Busca, ainda, compreender a influência das convocações para as seleções nacionais nos índices de escolaridade desses atletas de elite, como abandono, atraso e repetência escolar. A pesquisa mostra que esse grupo de atletas de elite apresenta médias de repetência, abandono e atraso escolar maiores que as médias nacionais. O terceiro capítulo analisa o entendimento desse grupo de jovens atletas em relação à formação escolar ou, ainda, se um possível desinteresse do grupo pelo modelo atual de escola se daria apenas pelo fato de serem esportistas de elite. Para isso, recorre às possibilidades de investigação oriundas da segunda metade do questionário utilizado como instrumento para adotar uma metodologia de livre associação de palavras direcionadas a partir de quatro palavras indutoras (estruturas semânticas), a saber: “treinar”, “estudar”, “ir a escola” e “competir”. Essa associação livre é usualmente utilizada como suporte teórico/metodológico em pesquisas que investigam representação social (ACOSTA, 2005). Ao dar visibilidade a essas questões nota-se que a posição desses atletas, em relação à escola, não difere das encontradas em outras pesquisas que tratam de jovens inseridos no ensino médio. A falta de significado do que se aprende na escola em relação ao que eles desejam desenvolver como atividade laboral, faz com que a escola seja entendida como monótona, mas, ao mesmo tempo, necessária, caso seus projetos de formação esportiva não aconteçam.

The Brazilian position on forests and climate change from 1997 to 2012: from veto to proposition

This article describes the Brazilian position on forests and climate change from 1997 to 2012. It argues that it has evolved from a veto, which excluded from the climate change regime emissions from the conversion of native forests, to a proposition, as Brazil offered its approach to the international community. It explains the change with domestic developments: governance over deforestation, the emergence of new and relevant actors, and presidential diplomacy.

Automatic modeling of an orthotic bracing for nonoperative correction of PectusCarinatum

Pectus Carinatum is a deformity of the chest wall, characterized by an anterior protrusion of the sternum, often corrected surgically due to cosmetic motivation. This work presents an alternative approach to the current open surgery option, proposing a novel technique based on a personalized orthosis. Two different processes for the orthosis’ personalization are presented. One based on a 3D laser scan of the patient chest, followed by the reconstruction of the thoracic wall mesh using a radial basis function, and a second one, based on a computer tomography scan followed by a neighbouring cells algorithm. The axial position where the orthosis is to be located is automatically calculated using a Ray-Triangle intersection method, whose outcome is input to a pseudo Kochenek interpolating spline method to define the orthosis curvature. Results show that no significant differences exist between the patient chest physiognomy and the curvature angle and size of the orthosis, allowing a better cosmetic outcome and less initial discomfort