Investigation on the s of guava (Psidium guajava L.) infusions on germination, root tips and meristematic cells of Latuca sativa

Guava (Psidium guajava L.) is a plant often employed in popular medicine. Recently several studies have alerted about the toxicity of substances present in medicinal plants, which can pose risks to the human health. In this sense, the present work aimed to investigate the phytotoxic, cytotoxic and genotoxic action of three guava varieties - Paluma, Pedro Sato and Roxa (purple) - on the plant test system Lactuca sativa L. Thus, macro- and microscopic evaluations were carried out for five infusion concentrations (2.5, 5.0, 10.0, 20.0 and 40.0 g.L-1) prepared from each variety. Distilled water was used as negative control. Chromatographic and spectroscopic analysis by HPLC-PAD indicated that the chemical composition of the infusion of Roxa is different than that of the infusions of the varieties Paluma and Pedro Sato. It was observed that seed germination and root growth in L. sativa exposed to infusions decreased with increasing infusion concentration, regardless of the tested cultivar. For the mitotic index, no statistical differences were observed. On the other hand, a significant increase in the frequency of cell cycle alterations was verified, especially for the highest concentrations tested. The cytogenotoxic was significant. Therefore, guava should not be used indiscriminately in popular medicine.

Effects of residential energy-saving lamps on the attraction of nocturnal insects

Many species of insects display a disposition to move towards light. As a consequence, nocturnal artificial lighting often contributes to an increase in insect population among humans. We tested the hypothesis that residential white lamps can evoke significantly different attraction to insects even when their light outputs are nearly indistinguishable to humans. In a two-choice experiment using insect traps equipped with either a compact fluorescent or a LED light source with similar photometric specifications, about three times more insects were captured in the trap with a compact fluorescent lamp than in the LED trap. The results suggest that LED lamps are preferable to compact fluorescent lamps when the objective is to avoid attracting nocturnal insects to households.

Evaluation of hollow fiberoptic tips for the conduction of Er : YAG laser

Objective: The use of Er:YAG laser operating in the 3 μm range with adjustable power and pulses has become popular for dental and medical practice due to its high photoablative capacity, surgical precision and antimicrobial action. Background data: The existing fiberoptic tips irradiate lasers parallel to the long axes of the tooth limiting its efficiency in the root canal. Methods: We evaluated hollow fiberoptic tips obtained from silicate glass as a means of Er:YAG laser conduction in dental procedures. The fiber tips were molded from capillary tubes with different profiles so that their ends would have cylindric, conical or spherical shapes. The performance of the three fibers as a means of propagation of Er:YAG (λ = 2.94 μm) laser radiation was compared to that of a solid sapphire fiber at 10 Hz and 200 mJ and of 20 Hz and 500 mJ. The profiles of frontal and lateral burning were visualized on thermal paper. Results: Analysis of these profiles demonstrated that the sapphire tip and the hollow fiber of cylindric section did not differ significantly in the profiles of frontal burning, and no lateral burning was detected. The fibers of the conical and spherical sections, although presenting attenuation in the frontal output power, showed a larger burning area in the frontal profile, in addition to producing lateral burning. Conclusions: The results indicate that commercial hollow fiberoptics have advantages such as easy manufacture of the different tip shapes, great adaptability, low cost, and a low loss of transmission. © Mary Ann Liebert, Inc.

Saving the Vaquita: Immediate Action, Not More Data

The recent likely extinction of the baiji (Chinese river dolphin [Lipotes vexillifer]) (Turvey et al. 2007) makes the vaquita (Gulf of California porpoise [Phocoena sinus]) the most endangered cetacean. The vaquita has the smallest range of any porpoise, dolphin, or whale and, like the baiji, has long been threatened primarily by accidental deaths in fishing gear (bycatch) (Rojas-Bracho et al. 2006). Despite repeated recommendations from scientific bodies and conservation organizations, no effective actions have been taken to remove nets from the vaquita’s environment. Here, we address three questions that are important to vaquita conservation: (1) How many vaquitas remain? (2) How much time is left to find a solution to the bycatch problem? and (3) Are further abundance surveys or bycatch estimates needed to justify the immediate removal of all entangling nets from the range of the vaquita? Our answers are, in short: (1) there are about 150 vaquitas left, (2) there are at most 2 years within which to find a solution, and (3) further abundance surveys or bycatch estimates are not needed. The answers to the first two questions make clear that action is needed now, whereas the answer to the last question removes the excuse of uncertainty as a delay tactic. Herein we explain our reasoning.

The pterional craniotomy: tips and tricks

This review intended to describe in a didactic and practical manner the frontotemporosphenoidal craniotomy, which is usually known as pterional craniotomy and constitute the cranial approach mostly utilized in the modern neurosurgery. This is, then, basically a descriptive text, divided according to the main stages involved in this procedure, and describes with details how the authors currently perform this craniotomy.

Compressive strength of dental composites photo-activated with different light tips

The aim of this study was to evaluate the compressive strength of microhybrid (FiltekTM Z250) and nanofilled (FiltekTM Supreme XT) composite resins photo-activated with two different light guide tips, fiber optic and polymer, coupled with one LED. The power density was 653 mW cm-2 when using the fiber optic light tip and 596 mW cm-2 with the polymer. After storage in distilled water at 37± 2 °C for seven days, the samples were subjected to mechanical testing of compressive strength in an EMIC universal mechanical testing machine with a load cell of 5 kN and speed of 0.5 mm min-1. The statistical analysis was performed using ANOVA with a confidence interval of 95% and Tamhane’s test. The results showed that the mean values of compressive strength were not influenced by the different light tips (p > 0.05). However, a statistical difference was observed (p < 0.001) between the microhybrid composite resin photo-activated with the fiber optic light tip and the nanofilled composite resin. Based on these results, it can be concluded that microhybrid composite resin photo-activated with the fiber optic light tip showed better results than nanofilled, regardless of the tip used, and the type of the light tip did not influence the compressive strength of either composite. Thus, the presented results suggest that both the fiber optic and polymer light guide tips provide adequate compressive strength to be used to make restorations. However, the fiber optic light tip associated with microhybrid composite resin may be an interesting option for restorations mainly in posterior teeth.

Evaluation of degree of conversion and hardness of dental composites photo-activated with different light guide tips

Objective: The aim of this study was to evaluate the degree of conversion and hardness of different composite resins, photo-activated for 40 s with two different light guide tips, fiber optic and polymer. Methods: Five specimens were made for each group evaluated. The percentage of unreacted carbon double bonds (% C=C) was determined from the ratio of absorbance intensities of aliphatic C=C (peak at 1637 cm-1) against internal standard before and after curing of the specimen: aromatic C-C (peak at 1610 cm-1). The Vickers hardness measurements were performed in a universal testing machine. A 50 gf load was used and the indenter with a dwell time of 30 seconds. The degree of conversion and hardness mean values were analyzed separately by ANOVA and Tukey's test, with a significance level set at 5%. Results: The mean values of degree of conversion for the polymer and fiber optic light guide tip were statistically different (P<.001). The hardness mean values were statistically different among the light guide tips (P<.001), but also there was difference between top and bottom surfaces (P<.001). Conclusions: The results showed that the resins photo-activated with the fiber optic light guide tip promoted higher values for degree of conversion and hardness.

Factors predicting mortality after tips for refractory ascites: a single center experience

Introduction: Transjugular intrahepatic porto-systemic shunt (TIPS) is an accepted indication for treating refractory ascites. Different models have been proposed for the prediction of survival after TIPS; aim of present study was to evaluate the factors associated with mortality after TIPS for refractory ascites. Methods: Seventy-three consecutive patients undergoing a TIPS for refractory ascites in our centre between 2003 and 2008, were prospectively recorded in a database ad were the subject of the study. Mean follow-up was 17±2 months. Forty patients were awaiting liver transplantation (LT) and 12 (16.4%) underwent LT during follow-up. Results: Mean MELD at the moment of TIPS was 15.7±5.3. Overall mortality was 23.3% (n=17) with a mean survival after TIPS of 17±14 months. MELD score (B=0.161, p=0.042), AST (B= 0.020, p=0.090) and pre-TIPS HVPG (B=0.016, p=0.093) were independent predictors of overall mortality. On multivariate analysis MELD (B=0.419, p=0.018) and pre-TIPS HVPG (B=0.223, p=0.060) independently predicted 1 year survival. Patients were stratified into categories of death risk, using ROC curves for the variables MELD and HVPG. Patients with MELD<10 had a low probability of death after TIPS (n=6, 16% mortality); patients with HVPG <16 mmHg (n=6) had no mortality. Maximum risk of death was found in patients with MELD score 19 (n=16, 31% mortality) and in those with HVPG 25 mmHg (n=27, 26% mortality). Conclusions: TIPS increases overall survival in patients with refractory ascites. Liver function (assessed by MELD), necroinflammation (AST) and portal hypertension (HVPG) are independent predictors of survival; patients with MELD>19 and HVPG>25 mmHg are at highest risk of death after TIPS

Studio dell'energy saving negli impianti farmaceutici: soluzioni ottimali per il ricircolo dei fluidi di processo

Questa tesi si pone il problema di studiare lo stato dell’arte degli impianti di produzione farmaceutici e di formulare, in base ai risultati ottenuti, uno o più possibili ipotesi di recupero d’energia, con particolare attenzione ai fluidi termo-vettori: in altri termini, questa tesi si prefissa l’obiettivo di realizzare un sistema utile e concreto per recuperare parte dell’energia termica, che nell'attuale concezione dell’impianto e dei suoi macchinari andrebbe smaltita e persa nei fluidi in uscita dal processo, e convertirla in energia riutilizzabile. Come modello per lo studio del problema, si fa riferimento a un tipico layout di produzione del farmaco, progettato e dimensionato dalla ditta IMA S.p.A. , settore Active, il quale entra come “materiale grezzo” ed esce come prodotto finito. L’azienda concepisce e progetta tipicamente le sue macchine e, di conseguenza, i suoi impianti in base alla quantità di prodotto che mediamente ogni ciclo produttivo lavorerà: in parole povere, gli impianti della divisione Active di IMA S.p.A. sono dimensionati e suddivisi per “taglie”.

TIPS-pentacene come rivelatore di raggi-X

Il presente lavoro di tesi si inserisce all’interno del progetto europeo i-FLEXIS il cui obiettivo è lo sviluppo di un sensore di raggi X innovativo, affidabile, a basso costo e basato su componenti eterogenei organici. Attualmente, i rivelatori di radiazione ionizzante a stato solido fanno uso di materiali inorganici e sono ampiamente impiegati in ambito medico, industriale e come dispositivi per la sicurezza. Le scoperte scientifiche degli ultimi anni nell'ambito dei semiconduttori organici hanno evidenziato che tali materiali sono sensibili alla radiazione ionizzante e il loro utilizzo permette di realizzare rivelatori diretti di raggi-X, convertendo fotoni in segnale elettrico. Questi dispositivi sono caratterizzati da flessibilità, possibilità di lavorare a temperatura ambiente, basso costo di produzione, poca energia di alimentazione, alta sostenibilità ambientale e dalla possibilità di coprire grandi aree. Tutte queste proprietà concorrono ad incrementare sempre più l’attenzione e l’interesse dei ricercatori in questo relativamente nuovo mondo: i semiconduttori organici. In questa tesi sono stati esaminati cinque diversi campioni di TIPS-pentacene con la finalità di evidenziare quali si prestino meglio come rivelatori di raggi-X. I campioni sono tutti in diverse forme e spaziano dal cristallo singolo ai film sottili, con particolare attenzione al comportamento dei cristalli singoli cresciuti mediante processi di stampa direttamente sul substrato. Per quanto riguarda i semiconduttori organici, la frazione di raggi-X assorbita dai materiali è molto piccola e non è in grado di giustificare il segnale misurato. Si è effettuato inoltre un confronto tra la risposta dei campioni alla luce visibile e alla radiazione ionizzante per comprendere il meccanismo di generazione e rivelazione delle cariche in seguito all’assorbimento di raggi-X.

Studio di fotoconducibilità di cristalli di TIPS-pentacene

I semiconduttori organici presentano proprietà che consentono la produzione di dispositivi impensabili fino a pochi anni fa: sono flessibili, leggeri e robusti, ed inoltre facili ed economici da depositare. La loro capacità di rivelare direttamente la radiazione ionizzante, convertendola in segnale elettrico, li pone come ottimi candidati per una nuova generazione di rivelatori a stato solido per raggi X, utilizzabili in situazioni e luoghi prima inaccessibili a quelli inorganici, o addirittura comodamente indossabili. Tuttavia i fenomeni di fotogenerazione e raccolta di carica in questi materiali non sono ancora completamente compresi. Ottimali per lo studio di queste ed altre proprietà intrinseche sono le forme di impacchettamento a cristallo singolo. Questa tesi analizza e confronta i segnali elettrici di campioni di cristalli singoli di TIPS-pentacene quando esposti a flussi crescenti di radiazione visibile e di raggi X a diversi voltaggi, proponendo dei modelli per la loro interpretazione. Viene inoltre riportato un confronto con le stesse misure effettuate su un campione dello stesso materiale in forma di film sottile.