A methodology to measure the interface shear strength by means of the fiber push-in test

A methodology is presented to measure the fiber/matrix interface shear strength in composites. The strategy is based on performing a fiber push-in test at the central fiber of highly-packed fiber clusters with hexagonal symmetry which are often found in unidirectional composites with a high volume fraction of fibers. The mechanics of this test was analyzed in detail by means of three-dimensional finite element simulations. In particular, the influence of different parameters (interface shear strength, toughness and friction as well as fiber longitudinal elastic modulus and curing stresses) on the critical load at the onset of debonding was established. From the results of the numerical simulations, a simple relationship between the critical load and the interface shear strength is proposed. The methodology was validated in an unidirectional C/epoxy composite and the advantages and limitations of the proposed methodology are indicated.

Enabling query technologies for the semantic sensor web

Sensor networks are increasingly being deployed in the environment for many different purposes. The observations that they produce are made available with heterogeneous schemas, vocabularies and data formats, making it difficult to share and reuse this data, for other purposes than those for which they were originally set up. The authors propose an ontology-based approach for providing data access and query capabilities to streaming data sources, allowing users to express their needs at a conceptual level, independent of implementation and language-specific details. In this article, the authors describe the theoretical foundations and technologies that enable exposing semantically enriched sensor metadata, and querying sensor observations through SPARQL extensions, using query rewriting and data translation techniques according to mapping languages, and managing both pull and push delivery modes.

Pandeo simultáneo de pilas de puente: aplicación a un cálculo sísmico tipo push-over de las pilas del puente atirantado de Bucaramanga en Colombia

Se presenta el algoritmo implementado para probar la estabilidad de pilas de puente de forma global, es decir, integradas en la estructura más general del puente. El método planteado constituye una alternativa más general al método habitual de leyes momento-curvatura. Se describe su aplicación al puente atirantado de Bucaramanga de 292 m de luz y pilas de 50 y 70 m de altura (altura total de la torre mayor de 133 m). Su aplicación, considerando confinamiento en determinadas secciones de pilas permite tener en cuenta la generación de rótulas plásticas y demostrar el grado de ductilidad alcanzado en la estructura, constituyendo una aplicación practica del método de calculo sísmico por capacidad o push-over a pilas de puente.The relevance of this article is threefold: 1st It presents in detail the algorithm used to test the stability of bridge piers in a global model, i.e., integrated in the most general structure of the bridge. 2nd The method put forward represents a more general alternative to the commonly used moment-curvature method of sectional analysis for biaxial bending under constant axial force. 3rd It describes the algorithm’s application to a 292 m span cable-stayed bridge with piers of 50 and 70 m in height (total height of the biggest tower 133 m). Its application, considering confinement in some particular cross-sections of piers permits the taking into account of “plastic hinges” phenomena due to earthquakes and demonstrates the degree of ductility achieved in the structure. This constitutes a practical application of the push-over method to bridge piers.

Comportamiento a cortante puro de hormigones reforzados con fibras sometidos a ensayos tipo Push-Off

El hormigón como material de construcción constituye la base fundamental del desarrollo de la infraestructura de nuestras sociedades modernas. Este material compuesto en su forma mas básica de material cementoso, áridos finos, gruesos y agua es muy versátil dada la posibilidad de fabricación en obra, su capacidad de moldeo y sus altas prestaciones mecánicas ante cargas de compresión El uso de fibras dentro de la matriz del hormigón surge como una opción para mejorar las capacidades mecánicas del hormigón, tendiente principalmente a un aumento de su capacidad de absorción de energía (Aumento de ductilidad). El objetivo de este trabajo fue el estudio del comportamiento mecánico de hormigones autocompactantes reforzados con fibras de poliolefina y metálicas sometidos a esfuerzos de cortante puro. Para esto se realizaron ensayos tipo “Push-Off” sobre diferentes dosificaciones de fibras agregadas a hormigones patrón de referencia. La campana experimental se realizo sobre hormigones autocompactantes de campanas experimentales anteriores. La campana abarca hormigones reforzados con fibra de poliolefina desde el umbral inferior de 3kg/m3 hasta un valor máximo de 10kg/m3, así como hormigones reforzados con fibra de acero con 26 y 70 kilogramos de fibra por metro cúbico de hormigón, buscando evaluar su comportamiento mecánico en estado endurecido a ensayos de cortante puro tipo “Push-off”. Dichos ensayos fueron instrumentados mediante la colocación de CMOD (Crack mouth open displacement) en las entallas, así como usando la técnica de la video extensometría (DIC por sus siglas en ingles), la cual permite hacer un análisis mas minucioso de los estados de deformaciones de toda la probeta. Se concluyo que los hormigones con bajos y medios contenidos de fibras de poliolefina aumentan en pequeña magnitud su ductilidad, estando condicionados los ensayos tipo “Push-off” de los mismos a la probabilidad de encontrar fibras en la interfaz de la fisura por cortante. En el caso de los hormigones con contenido medio de fibras de acero, se concluyo que tienen una gran mejoría en su comportamiento frente a cortante puro. Su comportamiento post-pico tiene aumentos considerables con respecto a los hormigones no reforzados, ductilidad y capacidad de conservación de cargas residuales, y la capacidad de disipación de energía de estos es intermedia entre los hormigones de bajo contenido de fibras de poliolefina y los de alto contenido tanto de acero como de poliolefina. Estos hormigones constituyen en general un punto medio entre economía y facilidad de fabricación y desempeño mecánico. En el caso de los hormigones de alto contenido de fibras de poliolefina, se obtuvieron comportamientos post-pico con alta ductilidad, con deformaciones que superan valores de 2mm. Las cargas pico de los mismos fueron levemente superiores a los hormigones no reforzados y un poco inferiores a los de alto contenido de fibras de acero sin ser concluyentes los resultados al respecto. Estos hormigones disipan menos energía en la fractura que los hormigones de acero hasta deformaciones de 2mm pero una vez alcanzada la misma se evidencio que el cortante residual de estos superaba la de los hormigones con fibra de acero. Los hormigones con alto contenido de fibra de acero presentaron los mejores resultados de la campana experimental, con cargas pico mayores, ramas de descarga con pendiente reducida (fallas dúctiles) y mayor cantidad de energía disipada. A pesar de esto es importante tener en cuenta que los resultados obtenidos no estuvieron muy alejados de los hormigones con alto contenido de fibras de poliolefina, los cuales son mas económicos, menos densos, mas durables y mas manejables.

Comparison of push-in and push-out tests for measuring interfacial shear strength in nano-reinforced composite materials

The influence of the carbon nanotubes (CNTs) content on the fiber/matrix interfacial shear strength (IFSS) in glass/fiber epoxy composites was measured by means of push-in and push-out tests. Both experimental methodologies provided equivalent values of the IFSS for each material. It was found that the dispersion of CNTs increased in IFSS by 19% in average with respect to the composite without CNTs. This improvement was reached with 0.3 wt.% of CNTs and increasing the CNT content up to 0.8 wt.% did not improve the interface strength.

The role of London forces in defining noncentrosymmetric order of high dipole moment–high hyperpolarizability chromophores in electrically poled polymeric thin films

Graphs of second harmonic generation coefficients and electro-optic coefficients (measured by ellipsometry, attenuated total reflection, and two-slit interference modulation) as a function of chromophore number density (chromophore loading) are experimentally observed to exhibit maxima for polymers containing chromophores characterized by large dipole moments and polarizabilities. Modified London theory is used to demonstrated that this behavior can be attributed to the competition of chromophore-applied electric field and chromophore–chromophore electrostatic interactions. The comparison of theoretical and experimental data explains why the promise of exceptional macroscopic second-order optical nonlinearity predicted for organic materials has not been realized and suggests routes for circumventing current limitations to large optical nonlinearity. The results also suggest extensions of measurement and theoretical methods to achieve an improved understanding of intermolecular interactions in condensed phase materials including materials prepared by sequential synthesis and block copolymer methods.

Polarity of microtubule assemblies during neuronal cell migration.

The active migration of neurons from their sites of origin to their final destinations requires the unidirectional translocation of the nuclei and somatic cytoplasm within the growing leading processes. To explore the cellular machinery underlying this translocation, we determined the polarity of microtubules situated within the leading and trailing processes of migrating cerebellar granule cells in situ. Our analysis reveals that the newly assembled positive ends of the microtubules in the leading process uniformly face the growing tip, while their disintegrating negative ends face the nucleus. In the trailing process, by contrast, microtubule arrays are of mixed polarity. We suggest that the dynamics of slow polymerization in combination with fast disintegration of oriented microtubules create "push" and "pull" forces that contribute to the piston-like saltatory displacement of the nucleus and cytoplasm within the membrane cylinder of the leading process of the migrating neuron.

Human Trafficking for sexual exploitation in Europe. Towards a true “EU approach”?

La presente tesi analizza il reato di traffico di esseri umani in Europa, con particolare attenzione al fenomeno dello sfruttamento sessuale. La ricerca è stata condotta in parte nell’ambito del progetto “FIDUCIA. New European crimes and trust-based policy” (www.fiduciaproject.eu). La tesi è composta da 5 capitoli. Il primo capitolo introduce il reato di tratta di esseri umani, a livello globale e, successivamente, nello specifico, in Europa. Vengono presentati i fattori determinanti e le origini del fenomeno. Inoltre, ne vengono fornite le definizioni e le principali caratteristiche, in linea con i più importanti documenti internazionali sul tema. Il capitolo si chiude con una panoramica statistica, che affronta anche le criticità della raccolta di dati relativi ai reati. Il secondo capitolo analizza l’approccio correntemente adottato a livello domestico ed europeo contro la tratta. Le misure vengono presentate prima dal punto di vista teorico; successivamente ne vengono forniti esempi concreti, ad esempio convenzioni internazionali, direttive, ma anche progetti di ricerca, collaborazioni internazionali tra autorità ed ONG. Il terzo capitolo si concentra sulla tratta a fini di sfruttamento sessuale. Vengono analizzati il potenziale legame con la prostituzione, e l’approccio europeo. Segue un approfondimento dei modelli legali implementati a livello europeo ed uno studio comparato di cinque paesi membri, rappresentativi dei vari modelli di regolamentazione della prostituzione (Italia, Belgio, Polonia, Germania e Svezia). Il quarto capitolo raccoglie le interviste condotte con diversi esperti che si occupano di contrasto alla tratta: ONG italiane e straniere, referenti nazionali anti-tratta di Italia, Belgio e Germania, FRONTEX, membri del Parlamento Europeo. Nelle conclusioni, vengono proposte prima una valutazione complessiva del quadro attuale, e poi alcune raccomandazioni ai governi nazionali e agli organismi sopranazionali. In particolare, visto l’obiettivo di un contrasto omogeneo e coordinato della tratta (per sfruttamento sessuale specificamente) a livello europeo, si ritiene che un modello regolamentare uniforme della prostituzione negli stati membri possa contribuire a migliorare uniformità ad efficacia dell’approccio europeo alla tratta.