The effect of unlocking RGD-motifs in collagen I on pre-osteoblast adhesion and differentiation

Denaturation of extracellular matrix proteins exposes cryptic binding sites. It is hypothesized that binding of cell adhesion receptors to these cryptic binding sites regulates cellular behaviour during tissue repair and regeneration. To test this hypothesis, we quantify the adhesion of pre-osteoblastic cells to native (Col) and partially-denatured (pdCol) collagen I using single-cell force spectroscopy. During early stages of cell attachment (≤180 s) pre-osteoblasts (MC3T3-E1) adhered significantly stronger to pdCol compared to Col. RGD (Arg-Gly-Asp)-containing peptides suppressed this elevated cell adhesion. We show that the RGD-binding α5β1- and αv-integrins mediated pre-osteoblast adhesion to pdCol, but not to Col. On pdCol pre-osteoblasts had a higher focal adhesion kinase tyrosine-phosphorylation level that correlated with enhanced spreading and motility. Moreover, pre-osteoblasts cultured on pdCol showed a pronounced matrix mineralization activity. Our data suggest that partially-denatured collagen exposes RGD-motifs that trigger binding of α5β1- and αv-integrins. These integrins initiate cellular processes that stimulate osteoblast adhesion, spreading, motility and differentiation. Taken together, these quantitative insights reveal an approach for the development of alternative collagen I- based surfaces for tissue engineering applications.

Sensing and control on the sphere

The advantages of a spherical imaging model are increasingly well recognized within the robotics community. Perhaps less well known is the use of the sphere for attitude estimation, control and scene structure estimation. This paper proposes the sphere as a unifying concept, not just for cameras, but for sensor fusion, estimation and control. We review and summarize relevant work in these areas and illustrate this with relevant simulation examples for spherical visual servoing and scene structure estimation.

An evolution of waterfront development in Malaysia

River has long been recognized as one of humanity’s most important natural resources. It is one of the most important of all the natural resources necessary to ensure human health and civilization. A close association between cities and water is inherent since the history of civilization and in fact, many urban cities in Malaysia are located close to river areas. The last two decades shown Malaysia has shifted development strategy from agricultural based to industrialization, and manufacturing industries have become the economy’s main source for the country until now. This transformation in 18th century is clearly shown that rapid urbanization, industrial and intensive agricultural activities, as well as wide-spread land development, have contributed to extensive changing of river functions for economy, national development and environment. In particular, river roles are become less significance for human life and river function limited only for transportation purposes only. So, viewed historically, waterfront development in Malaysia have undergone cycles of change over the decades and the latest in this pattern to more public purposes such as recreational and mixed used development. This paper aims to identify a transition of waterfront development in Malaysia from history time to modernization era and it would give a significance contribution for the research is currently on going.

PLGA-based microparticles for the sustained release of BMP-2

The development of growth factor delivery strategies to circumvent the burst release phenomenon prevalent in most current systems has driven research towards encapsulating molecules in resorbable polymer matrices. For these polymer release techniques to be efficacious in a clinical setting, several key points need to be addressed. This present study has investigated the encapsulation of the growth factor, BMP-2 within PLGA/PLGA-PEG-PLGA microparticles. Morphology, size distribution, encapsulation efficiency and release kinetics were investigated and we have demonstrated a sustained release of bioactive BMP-2. Furthermore, biocompatibility of the PLGA microparticles was established and released BMP-2 was shown to promote the differentiation of MC3T3-E1 cells towards the osteogenic lineage to a greater extent than osteogenic supplements (as early as day 10 in culture), as determined using alkaline phosphatase and alizarin red assays. This study showcases a potential BMP-2 delivery system which may now be translated into more complex delivery systems, such as 3D, mechanically robust scaffolds for bone tissue regeneration applications.

Motivations and intentions : a case study of design-led activism

With a focus on intention and motivation, this paper describes a study involving three organisational communities and their collective effort to develop and provide more inclusive housing for people with disabilities and their families. While many studies, such as that by Rocha & Miles (2009), focus on commercial organisations, and sustainability from an economic perspective, this study involves a not-for-profit organisation (the accommodation and service provider) as well as a research organisation and a design action group volunteering their services free of charge. From this pro-bono context, the paper describes a case study that explores the nature of the collective as a basis for creative practice and political activism and the theoretical implications and wider application in terms of emerging research in the area of collaborative entrepreneurship and design activism.

Theoretical comparison of innovative window daylighting devices for a sub-tropical climate using radiance

Daylighting in tropical and sub-tropical climates presents a unique challenge that is generally not well understood by designers. In a sub-tropical region such as Brisbane, Australia the majority of the year comprises of sunny clear skies with few overcast days and as a consequence windows can easily become sources of overheating and glare. The main strategy in dealing with this issue is extensive shading on windows. However, this in turn prevents daylight penetration into buildings often causing an interior to appear gloomy and dark even though there is more than sufficient daylight available. As a result electric lighting is the main source of light, even during the day. Innovative daylight devices which redirect light from windows offer a potential solution to this issue. These devices can potentially improve daylighting in buildings by increasing the illumination within the environment decreasing the high contrast between the window and work regions and deflecting potentially glare causing sunlight away from the observer. However, the performance of such innovative daylighting devices are generally quantified under overcast skies (i.e. daylight factors) or skies without sun, which are typical of European climates and are misleading when considering these devices for tropical or sub-tropical climates. This study sought to compare four innovative window daylighting devices in RADIANCE; light shelves, laser cut panels, micro-light guides and light redirecting blinds. These devices were simulated in RADIANCE under sub-tropical skies (for Brisbane) within the test case of a typical CBD office space. For each device the quantity of light redirected and its distribution within the space was used as the basis for comparison. In addition, glare analysis on each device was conducted using Weinold and Christoffersons evalglare. The analysis was conducted for selected hours for a day in each season. The majority of buildings that humans will occupy in their lifetime are already constructed, and extensive remodelling of most of these buildings is unlikely. Therefore the most effective way to improve daylighting in the near future will be through the alteration existing window spaces. Thus it will be important to understand the performance of daylighting systems with respect to the climate it is to be used in. This type of analysis is important to determine the applicability of a daylighting strategy so that designers can achieve energy efficiency as well the health benefits of natural daylight.

Preparation of porous calcium phosphate ceramic scaffold in bone tissue engineering

Calcium Phosphate ceramic has been widely used in bone tissue engineering due to its excellent biocompatibility and biodegradability. However, low mechanical properties and biodegradability limit their potential applications. In this project, hydroxyapatite (HA) and calcium phosphate bioglass were used to produce porous tri-calcium phosphate (TCP) bio-ceramic scaffolds. It was found that porous TCP bioceramic could be obtained when 20wt percent bioglass addition and sintered in 1400 degrees celsius for 3 h. Significantly higher compressive strength (9.98 MPa) was achieved in the scaffolds as compared to those produced from tCP power (<3 MPa). The biocompatibility of the scaffold was also estimated.

Preparation of mesoporous bioglass coated zirconia scaffold for bone tissue engineering

Porous yttria-stabilized zirconia (YSZ) has been regarded as a potential candidate for bone substitute due to its high mechanical strength. However, porous YSZ is biologically inert to bone tissue. It is therefore necessary to introduce bioactive coatings onto the walls of the porous structures to enhance its bioactivity. In this study, porous YSZ scaffolds were prepared using a replication technique and then coated with mesoporous bioglass due to its excellent bioactivity. The microstructures were examined using scanning electron microscopy and the mechanical strength was evaluated via compression test. The biocompatibility and bioactivity were also evaluated using bone marrow stromal cell (BMSC) proliferation test and simulated body fluid test.

Ureaplasma colonization of amniotic fluid and efficacy of antenatal corticosteroids for preterm lung maturation in sheep

Objective: To assess the efficacy of maternal betamethasone for improving preterm lung function, in the presence of inflammation induced by amniotic fluid ureaplasma colonization. ----- ----- Study design: Ewes bearing single fetuses were randomized to receive an intra-amniotic injection of Ureaplasma parvum (serovar 6; 2×107 colony forming units) or vehicle at 86±2 days of pregnancy (mean±SD: term is 150d), followed by maternal intramuscular betamethasone (0.5mg/kg) or saline, either 2 or 7 days before delivery of lambs at 123±1d. ----- ----- Results: Amniotic fluid IL-8 was elevated by ureaplasmas (p=0.049) but unaffected by betamethasone. Lung inflammation induced by ureaplasmas was not affected by betamethasone. Lung compliance was increased by ureaplasma colonization (p=0.009) and betamethasone (p=0.042), and effects were additive. Lung surfactant was increased by ureaplasma colonization (p<0.001) and betamethasone 7 days (p=0.001), but not 2 days, before delivery. ----- ----- Conclusion: Inflammation improves preterm lung function due to increases in surfactant. Antenatal corticosteroids further augment lung function, through an apparently independent mechanism.

Socially adaptable housing new housing model for families living with disability

In Australia as far back as 1993, researchers such as Baladin and Chapmen reported that "18% of the total Australian population and 51% of the population over 60 years of age were identified as having a disability" (2001; p38.2). Statistics such as these are not by any means astonishing, even to members of the general public, and it is widely understood that these are only to increase significantly in our near future. What is particularly surprising however is, in the face of such statistics, the lack of new and creative responses to this demographic shift, particularly by the architecture and construction industries. The common response from a range of sectors seems to be the repetition of a series of models which offer limited, and often undesirable, housing options. It is this against this backdrop, characterized by a lack of original options from mainstream practitioners and relevant government bodies, that the need has arisen to develop alternative models at grass-roots level. This paper reports primarily on the work of one group comprising a not-for-profit organization, a pro-bono design practice group and a local university working together to design a more holistic, emotionally sustainable independent living model of housing for families where a member of the family has a disability. This approach recognizes the limitations of universal design in that it often does not " ... meet all the housing needs that arise for people with moderate to severe disabilities" (Scotts, Margie et al, 2007; p.17). It is hoped that by examining the work of such a collective which is not driven by profit or policy, but rather born with the aim to address first and foremost individual and community need, that better insight can be gained into the real requirements of individuals and families as well as open up a view to new ways of fulfilling them.

House as home : emotions centred design for disability

In this paper we highlight how current approaches to design for disability have failed to consider the emotional needs not only of those with disabilities but their families and other carers as well. In conjunction with this, we demonstrate through a review of literature the significance of the house, the home and home in the support and growth of the person as a whole in association with their loved ones, and the potential inequity that arises when the emotional and holistic dimensions of 'being' are neglected. With a growing trend nationally and internationally away from group and shared housing, a greater focus on the family and their home is required. However, as research has shown, home for families where a family member has a disability is not necessarily a positive experience; it can be a source of stress, work, conflict and burden, arousing emotions ranging from loss of control through guilt. As proposed in the paper, consideration of the negative as well as positive emotions demands exploration of the 'middle ground' between institutions and home-based care models. This paper outlines the beginning of one such exploration.

Myocyte enhancer factor 2C : an osteoblast transcription factor identified by DMSO enhanced mineralization

Rapid mineralization of cultured osteoblasts could be a useful characteristic in stem-cell mediated therapies for fracture and other orthopaedic problems. Dimethyl sulfoxide (DMSO) is a small amphipathic solvent molecule capable of simulating cell differentiation. We report that, in primary human osteoblasts, DMSO dose-dependently enhanced the expression of osteoblast differentiation markers alkaline phosphatase (ALP) activity and extracellular matrix mineralization. Furthermore, similar DMSO mediated mineralization enhancement was observed in primary osteoblast-like cells differentiated from mouse mesenchymal cells derived from fat, a promising source of starter cells for cell-based therapy. Using a convenient mouse pre-osteoblast model cell line MC3T3-E1 we further investigated this phenomenon showing that numerous osteoblast-expressed genes were elevated in response to DMSO treatment and correlated with enhanced mineralization. Myocyte enhancer factor 2c (Mef2c) was identified as the transcription factor most induced by DMSO, among numerous DMSO-induced genes, suggesting a role for Mef2c in osteoblast gene regulation. Immunohistochemistry confirmed expression of Mef2c in osteoblast-like cells in mouse mandible, cortical and trabecular bone. shRNAi-mediated Mef2c gene silencing resulted in defective osteoblast differentiation, decreased ALP activity and matrix mineralization and knockdown of osteoblast specific gene expression, including osteocalcin and bone sialoprotein. Flow on knockdown of bone specific transcription factors, Runx2 and osterix by shRNAi knockdown of Mef2c suggests that Mef2c lies upstream of these two important factors in the cascade of gene expression in osteoblasts.

Deceit and Bruno Taut's Glashaus

The historical context surrounding Bruno Taut's Glashaus has been established through work of authors like Reyner Banham, Dennis Sharp and Ian Boyd-Whyte. However, these English language translations, are mostly derived from secondary sources such as Adolf Behne and Paul Scheerbart. Surprisingly, Taut's own writings largely do not feature in this prevailing account of his work. Since 1990, strong doubts have arisen about this conventional picture of Taut's Glashaus. Manfred spiedel, for instance, minimizes Paul Scheerbart's contribution to the design by arguing that Scheerbart met Taut only a few months before the construction of the Glashaus, that is, after Taut had finished his preliminary sketches. Kurt Junghanns goes further and asserts that the Glashaus design was complete beefore Taut and Scheerbart ever met. In 2005, Kai Gutschow published The Culture of Criticism: Adolf Behne and the Development of Modern Architecture in Germany, 1910 - 1914. Most startling, Gutschow asserts that Behne acts as the propagandist for the Glashaus by fabricating its link with Expressionism. This is particularly troubling because nobody contributed more to establishing the link between the Glashaus, Bruno Taut and Expressionism than Behne. As a result of this new evidence, this paper concurs that the established historical understanding of the Glashaus is flawed. By returning to Taut's own writings, a reinterpretation can be offered that strongly links the Glashaus to the Victoria regia lily and Strasbourg Cathedral. The significance of this approach is that it re-establishes Taut's own rational behind the design of the Glashaus, and thus contributes to the re-evaluation of the generally accepted histories of the Modern movement.

PTZ camera pose estimation by tracking a 3D target

We present a technique for estimating the 6DOF pose of a PTZ camera by tracking a single moving target in the image with known 3D position. This is useful in situations where it is not practical to measure the camera pose directly. Our application domain is estimating the pose of a PTZ camerso so that it can be used for automated GPS-based tracking and filming of UAV flight trials. We present results which show the technique is able to localize a PTZ after a short vision-tracked flight, and that the estimated pose is sufficiently accurate for the PTZ to then actively track a UAV based on GPS position data.

Aircraft emission reduction through multi-disciplinary flight path optimisation

There is worldwide interest in reducing aircraft emissions. The difficulty of reducing emissions including water vapour, carbon dioxide (CO2) and oxides of nitrogen (NOx) is mainly due from the fact that a commercial aircraft is usually designed for a particular optimal cruise altitude but may be requested or required to operate and deviate at different altitude and speeds to archive a desired or commanded flight plan, resulting in increased emissions. This is a multi- disciplinary problem with multiple trade-offs such as optimising engine efficiency, minimising fuel burnt, minimise emissions while maintaining aircraft separation and air safety. This project presents the coupling of an advanced optimisation technique with mathematical models and algorithms for aircraft emission reduction through flight optimisation. Numerical results show that the method is able to capture a set of useful trade-offs between aircraft range and NOx, and mission fuel consumption and NOx. In addition, alternative cruise operating conditions including Mach and altitude that produce minimum NOx and CO2 (minimum mission fuel weight) are suggested.