Extraordinary divergence and positive Darwinian selection in a fusagenic protein coating the acrosomal process of abalone spermatozoa.

During fertilization in marine invertebrates, fusion between sperm and egg cell membranes occurs at the tip of the sperm acrosomal process. In abalone sperm the acrosomal process is coated with an 18-kDa protein. In situ, this protein has no effect on the egg vitelline envelope, but in vitro it is a potent fusagen of liposomes. Thus, the 18-kDa protein may mediate membrane fusion between the gametes, a step in gamete recognition known to restrict heterospecific fertilization in other species. The cDNA and deduced amino acid sequences of the 18-kDa protein were determined for five species of California abalone. The deduced amino acid sequences exhibit extraordinary divergence; the percent identity varies from 27% to 87%. Analysis of nucleotide substitution shows extremely high frequencies of amino acid-altering substitution compared to silent substitution, demonstrating that positive Darwinian selection promotes the divergence of this protein. However, amino acid replacement is conservative with respect to size and polarity of residue. The data support the developing idea that in free-spawning marine invertebrates, the proteins mediating fertilization may be subjected to intense, and as yet unknown, selective forces. The extraordinary divergence of fertilization proteins may be related to the establishment of barriers to heterospecific fertilization.

Mathematical modeling of drying process of unripe banana slices

Unripe banana flour (UBF) production employs bananas not submitted to maturation process, is an interesting alternative to minimize the fruit loss reduction related to inappropriate handling or fast ripening. The UBF is considered as a functional ingredient improving glycemic and plasma insulin levels in blood, have also shown efficacy on the control of satiety, insulin resistance. The aim of this work was to study the drying process of unripe banana slabs (Musa cavendishii, Nanicão) developing a transient drying model through mathematical modeling with simultaneous moisture and heat transfer. The raw material characterization was performed and afterwards the drying process was conducted at 40 ºC, 50 ºC e 60 ºC, the product temperature was recorded using thermocouples, the air velocity inside the chamber was 4 m·s-1. With the experimental data was possible to validate the diffusion model based on the Fick\'s second law and Fourier. For this purpose, the sorption isotherms were measured and fitted to the GAB model estimating the equilibrium moisture content (Xe), 1.76 [g H2O/100g d.b.] at 60 ºC and 10 % of relative humidity (RH), the thermophysical properties (k, Cp, ?) were also measured to be used in the model. Five cases were contemplated: i) Constant thermophysical properties; ii) Variable properties; iii) Mass (hm), heat transfer (h) coefficient and effective diffusivity (De) estimation 134 W·m-2·K-1, 4.91x10-5 m-2·s-1 and 3.278?10-10 m·s-2 at 60 ºC, respectively; iv) Variable De, it presented a third order polynomial behavior as function of moisture content; v) The shrinkage had an effect on the mathematical model, especially in the 3 first hours of process, the thickness experienced a contraction of about (30.34 ± 1.29) % out of the initial thickness, finding two decreasing drying rate periods (DDR I and DDR II), 3.28x10-10 m·s-2 and 1.77x10-10 m·s-2, respectively. COMSOL Multiphysics simulations were possible to perform through the heat and mass transfer coefficient estimated by the mathematical modeling.

Behavior-Based Safety: Developing a Regional Guidance

A behavior-based safety program improves overall safety culture and safety performance of an organization. A solid behavior-based safety program is achieved by successfully implementing key components. Key components include management commitment to the process, an effective training program, a cohesive observation process and a successful data collecting and reporting system. This Applied Capstone project defines a regional approach for each of the key components of a behavior-based safety program. Recommendations resulting from the project provide the company studied guidance on developing a consistent behavior-based safety program.

Developing a programme theory to explain how primary health care teams learn to respond to intimate partner violence: a realist case-study

Background: Despite the progress made on policies and programmes to strengthen primary health care teams’ response to Intimate Partner Violence, the literature shows that encounters between women exposed to IPV and health-care providers are not always satisfactory, and a number of barriers that prevent individual health-care providers from responding to IPV have been identified. We carried out a realist case study, for which we developed and tested a programme theory that seeks to explain how, why and under which circumstances a primary health care team in Spain learned to respond to IPV. Methods: A realist case study design was chosen to allow for an in-depth exploration of the linkages between context, intervention, mechanisms and outcomes as they happen in their natural setting. The first author collected data at the primary health care center La Virgen (pseudonym) through the review of documents, observation and interviews with health systems’ managers, team members, women patients, and members of external services. The quality of the IPV case management was assessed with the PREMIS tool. Results: This study found that the health care team at La Virgen has managed 1) to engage a number of staff members in actively responding to IPV, 2) to establish good coordination, mutual support and continuous learning processes related to IPV, 3) to establish adequate internal referrals within La Virgen, and 4) to establish good coordination and referral systems with other services. Team and individual level factors have triggered the capacity and interest in creating spaces for team leaning, team work and therapeutic responses to IPV in La Virgen, although individual motivation strongly affected this mechanism. Regional interventions did not trigger individual and/ or team responses but legitimated the workings of motivated professionals. Conclusions: The primary health care team of La Virgen is involved in a continuous learning process, even as participation in the process varies between professionals. This process has been supported, but not caused, by a favourable policy for integration of a health care response to IPV. Specific contextual factors of La Virgen facilitated the uptake of the policy. To some extent, the performance of La Virgen has the potential to shape the IPV learning processes of other primary health care teams in Murcia.

Toward equality of well-being : strategies for improving minority health : strategic planning and coordination process.

S/N 037017-024-01504-1 (GPO).

Developing New Tourism Services: Dinosaurs a New Drive Tourism Resource for Remote Areas

This paper examines issues encountered when developing new tourism services generally, and specific aspects relating to the development of remote area dinosaur fossil fields for tourism. It studies two sites, one in the USA and one in Australia. Access to both sites is by minor roads, and both sites are characterised by long drives separating the sites from small communities that offer limited infrastructure and few other attractions for visitors. In both areas, however, tourism is seen as one of the few possible ways to sustain existing communities in the face of declining primary-industry-based employment. In general, tourists visiting these areas are on touring holidays of two weeks’ duration or more where the attraction is the general attributes of the region as well as to a lesser extent their interest in dinosaur fossils. These provide a potential resource for remote-region economic development through commodification as a new tourism attraction. Development of dinosaur fossil finds as a tourism resource is conceptualised here as new service development. Developing new tourism services, especially in remote regions, is challenging and has not been well examined in the tourism literature. The new service development process used in this case study first examines the characteristics of the existing tourists travelling through the region. The characteristics of a number of potential market segments currently interested in dinosaur fossils were then examined and contrasted with the existing market. This is conceptualised on a specialist-generalist spectrum of interest in fossils. A study of the tourist service features associated with dinosaur fossil tourism in remote regions of the USA was conducted, leading to the identification of a number of possible incremental development opportunities. The paper then takes a strategic approach to examining potential new tourism service development related to dinosaur fossils in remote regions of Queensland, Australia. In particular, it describes use of information about existing services in similar regions as the basis for ideas about development as well as comparison between existing and potential markets.

Kinetic model for selective cultivation of microfungi in a microscreen process for food processing wastewater treatment and biomass production

The research was aimed at developing a technology to combine the production of useful microfungi with the treatment of wastewater from food processing. A recycle bioreactor equipped with a micro-screen was developed as a wastewater treatment system on a laboratory scale to contain a Rhizopus culture and maintain its dominance under non-aseptic conditions. Competitive growth of bacteria was observed, but this was minimised by manipulation of the solids retention time and the hydraulic retention time. Removal of about 90% of the waste organic material (as BOD) from the wastewater was achieved simultaneously. Since essentially all fungi are retained behind the 100 mum aperture screen, the solids retention time could be controlled by the rate of harvesting. The hydraulic retention time was employed to control the bacterial growth as the bacteria were washed through the screen at a short HRT. A steady state model was developed to determine these two parameters. This model predicts the effluent quality. Experimental work is still needed to determine the growth characteristics of the selected fungal species under optimum conditions (pH and temperature).

Prospective case review of a global e-health system for doctors in developing countries

The Swinfen Charitable Trust has managed email consultations for doctors in developing countries since 1999. The process was handled manually for the first three years and then subsequently using an automatic message-handling system. We conducted a prospective review of email consultations between referring doctors and consulting specialists during six months of automatic operation (December 2003 to May 2004). During the study period 125 consultations took place. These concerned a wide range of specialties (e.g. orthopaedics 17%, dermatology 16%, obstetrics and gynaecology 11%, radiology 10%). Of these referrals, 33% (41) were for paediatric cases. Consulting specialists, who were based in five countries, were volunteers. Referring doctors were from 24 hospitals in 12 developing countries. The median time from referral to definitive reply was 1.5 days (interquartile range 0.6-4.9). There was an 85% response rate (n = 106) to a survey concerning the value of the consultation to the referring doctor. All the referring doctors who responded made positive comments about the service and half said that it improved their management of the case. The second-opinion consultation system operated by the Swinfen Charitable Trust represents an example of a global e-health system operated for altruistic, rather than commercial, reasons.

Diagnostic goal driven modelling and simulation of multiscale process systems

A systematic goal-driven top-down modelling methodology is proposed that is capable of developing a multiscale model of a process system for given diagnostic purposes. The diagnostic goal-set and the symptoms are extracted from HAZOP analysis results, where the possible actions to be performed in a fault situation are also described. The multiscale dynamic model is realized in the form of a hierarchical coloured Petri net by using a novel substitution place-transition pair. Multiscale simulation that focuses automatically on the fault areas is used to predict the effect of the proposed preventive actions. The notions and procedures are illustrated on some simple case studies including a heat exchanger network and a more complex wet granulation process.

Developing foreign bank efficiency models for DEA grounded in finance theory

We develop foreign bank technical, cost and profit efficiency models for particular application with data envelopment analysis (DEA). Key motivations for the paper are (a) the often-observed practice of choosing inputs and outputs where the selection process is poorly explained and linkages to theory are unclear, and (b) foreign bank productivity analysis, which has been neglected in DEA banking literature. The main aim is to demonstrate a process grounded in finance and banking theories for developing bank efficiency models, which can bring comparability and direction to empirical productivity studies. We expect this paper to foster empirical bank productivity studies.

A process for the systematic review of community-based rehabilitation evaluation reports: formulating evidence for policy and practice

A methodological framework for conducting a systematic, mostly qualitative, meta-synthesis of community-based rehabilitation (CBR) project evaluation reports is described. Developed in the course of an international pilot study, the framework proposes a systematic review process in phases which are strongly collaborative, methodologically rigorous and detailed. Through this suggested process, valuable descriptive data about CBR practice, strategies and outcomes may be synthesized. It is anticipated that future application of this methodology will contribute to an improved evidence base for CBR, which will facilitate the development of more appropriate policy and practice guidelines for disability service delivery in developing countries. The methodology will also have potential applications in areas beyond CBR, which are similarly. evidence poor' (lacking empirical research) but 'data rich' (with plentiful descriptive and evaluative reports).

The novel cytoskeleton-associated protein Neuronal protein 22: Elevated expression in the developing rat brain

Neuronal development and process targeting is mediated by proteins of the cytoskeleton. However, the signaling pathways underlying these mechanisms are complex and have not yet been fully elucidated. Neuronal protein 22 (NP22) has been identified as a cytoskeleton-associated protein. It colocalizes with microtubules and actin, the two major components of the cytoskeleton. It contains numerous signaling motifs and induces process formation in non-neuronal cells. Expression of rat NP22 (rNP22) rises incrementally at specific time points during brain development, with the greatest elevation occurring during synaptogenesis in the rat brain. its neuronal localization is primarily at the plasma membrane of the soma in the embryonic brain and progresses into homogeneous expression in the postnatal rat brain. Data suggest that NP22 may play a role in mediating the molecular events governing development of the neuronal architecture. Furthermore, its sustained expression in postnatal brain implies a function in the maintenance of neuronal morphology.

Developing context-aware pervasive computing applications: Models and approach

There is growing interest in the use of context-awareness as a technique for developing pervasive computing applications that are flexible, adaptable, and capable of acting autonomously on behalf of users. However, context-awareness introduces a variety of software engineering challenges. In this paper, we address these challenges by proposing a set of conceptual models designed to support the software engineering process, including context modelling techniques, a preference model for representing context-dependent requirements, and two programming models. We also present a software infrastructure and software engineering process that can be used in conjunction with our models. Finally, we discuss a case study that demonstrates the strengths of our models and software engineering approach with respect to a set of software quality metrics.

Modern methods for traditional tasks: Developing an electronic version of student fieldwork assessment at The University of Queensland.

Fieldwork placements are an integral part of many professional tertiary programmes. At The University of Queensland, Occupational Therapy students undertake block fieldwork affiliations off campus at a wide range of sites as part of their studies. Students’ fieldwork performance has traditionally been assessed using a hard copy format of the Student Placement Evaluation Form (SPEF), which is posted to the university on completion by the clinical supervisor. This project aimed to develop an electronic version of the UQ Occupational Therapy Student Placement Evaluation Form (SPEF), to allow the assessment to be completed and returned in an on line format. Practitioners had become very comfortable with using the existing print based form so in order to encourage and assist users to extend beyond their comfort zones, numerous steps were taken to ease the learning process including incorporating the existing page layout, consistent colour coding, considerable user instruction, testing and software enhancement cycles. Additionally, the e-version of the SPEF aimed to provide a range of benefits such as on screen assistance in the form of instructions, roll overs and feedback to supervisors, increased accuracy, faster completion, cost savings to the School, up to date design, improved security and confidential and anonymous storage of fieldwork results for potential future research.