999 resultados para polímeros naturais
Resumo:
This paper presents an automatic procedure employing a reagent in the form of a slurry in a flow-injection system. The feasibility of the proposal is demonstrated by sulphate determination in water using the Barium Chloranilate method, which is based on the precipitation of barium sulphate. The release of a stoichiometric amount of highly colored chloranilic ions is monitored at 528 nm. The reaction is carried out in alcoholic medium in order to reduce the solubility of the reagent. A considerable improvement in the sensitivity is attained by adding ferric ions to the released chloranilic ions. An on-line filtration step to separate the excess reagent from the released chloranilic ions was necessary. In addition, a column containing a cation exchange resin was included in the manifold to remove potentially interfering ions. The proposed procedure is suitable for 30 determinations per hour and the relative standard deviation is less than 2%. The analytical curve is linear between 0.0 and 40 mg L-1 and the determination limit is about 2.0 mg L-1SO4(2-). Accuracy was confirmed by running several samples already analysed by a standard turbidimetric procedure.
Resumo:
The use of natural dyes to demonstrate principles of paper chromatography is proposed. Extraction of the coloring compounds were performed in order to obtain the aglycone form of the anthocyanins present in the crude extracts. Separations were carried out on chromatographic paper with BAW (butanol/acetic acid/water) as mobile phase and the results compared with literature data. The crude extracts were obtained from Tibouchina granulosa, Rododhendron simsii, Impatiens walleriana flowers which are wildely found in Brazil and Phaseolus vulgaris L. grains skin which is the principal ingredient of the world famous "feijoada". Such species were chosen in order to attract the students attention since they are present in their quotidian, in agreement with the new proposals for Brazilian education.
Resumo:
In this work, the fruit extracts of Morus nigra - mulberry, Syzygium cuminii - jambolão, Vitis vinifera ¾ grape, Myrciaria cauliflora - jabuticaba are suggested as pH indicators in the form of either solutions or paper. The pH indicator solutions were prepared by soaking the fruits or their peels in ethanol 1:3 (m/V) for 24 h, followed by simple filtration. The pH indicator papers were prepared by imersion of the qualitative filter paper strips in the pH indicator solutions. The different pH leads to color changes in the indicator solutions or papers and it can be used for teaching elementary chemistry concepts.
Resumo:
Probably one of the most difficult and challenging aspects of measuring trace metals in natural waters is to avoid contamination during sampling, manipulation and analysis. This work discusses how to avoid contamination using simple procedures, and considers alternative methods to purify deionised water and low grade reagents to enable accurate determination of trace metals in natural waters in a common laboratory. Measurements were performed by cathodic stripping voltammetry and copper was used as a model metal to test the procedures. It was possible to evaluate copper speciation in natural waters even when total dissolved copper concentration was as low as 1.5 nmol L-1. The methods' accuracy was confirmed by analysis of certified seawater.
Resumo:
This article offers an overview on the historical facts and the recent state of art of Chemistry of Natural Products which, in the course of 25 years of SBQ, have led to the present development of this area in Brazil. In addition, this article deals with the last trends on Natural Products in Brazil and also in developed countries.
Resumo:
This paper describes a comparative analysis on natural product chemistry between the Brazilian Chemical Society journals and twelve representative international publications in the area. The search using the ISI Web of Knowledge disclosed 41,362 publications in the years 2000-2002 containing at least one researcher from a Brazilian Institution, from which 12% belongs to natural products.
Resumo:
The bioassay-guided fractionation of the hexane extract obtained from the medicinal plant Myroxylon balsamum (red oil) was conducted in preparative thin layer chromatography on silica gel. The obtained fractions and some terpenoids and phenylpropanoids were assayed as larvicidal on third instar Aedes aegypti larvae, NPPN colony. The results indicate that the sesquiterpene nerolidol was the active constituent in the extract and that the sesquiterpenes were more active than the monoterpenes and phenylpropanoids utilized in this study. Lipophilicity seems to be an important property for the activity since the compounds with hydroxyl, carbonyl and methoxyl groups were less active. The results confirm also that essential oils can be a good tool for the control of dengue.
Resumo:
With the aim of studying the interaction of fast electrons with solid surfaces we have developed an experimental set-up based on electron stimulated desorption (ESD) coupled to time-of-flight (TOF) mass spectrometry. Poly(methyl methacrylate) and poly(vynil chloride) samples have been irradiated by a pulsed electron beam of 1.2 keV and 0.18 µs FWHM. The results show that H+ is the main ionic species to desorb after electron bombardment. In addition, other ionic fragments were also observed and assigned. These results show the potentiality of this technique in the study of ESD of polymers.
Resumo:
Microtubules are involved in many aspects of cellular biology and represent an important target of anticancer chemotherapeutics. In the past five years, novel natural products such as epothilones, discodermolide, sarcodictyin, eleutherobin, and laulimalide, all of which have biological activities similar to those of paclitaxel (Taxolâ), have been discovered. Taxolâ is an important antitumor drug approved by the FDA for the treatment of ovarian, breast and non-small-cell lung carcinomas and became the first natural product described that stabilized microtubules avoiding the cellular replication. The present article reports new natural products that are able to act on the stabilization of microtubules.
Resumo:
The Brazilian effort on R&D of products from the national biodiversity dates back to the 70's. The Central de Medicamentos - CEME - was tailored to add scientific and technological competence to the production of pharmaceutical drugs derived from the Brazilian biodiversity by means of the Research Programme on Medicinal Plants - PPPM. Although previous to the Convention on Biological Diversity - CBD - and to the current debate and the ever-growing interest on phytomedicines, CEME has historical importance in the present governmental efforts on fostering the R&D on phytomedicines. This article makes a historical redemption of the PPPM, the actions and the results in the course of its existence.
Resumo:
The application of biocatalysis is a promising field related to new technologies for organic synthesis. The development of immobilization techniques is very important due to the multiple or repetitive use of a single batch of enzymes and the ability to stop the reaction rapidly, at any stage, by removing the enzymes. In most cases, after immobilization, enzymes and microorganisms maintain or even increase their activity and stability. This work presents an overview of the common methods for lipase immobilization in polymers and applications of these systems to obtain compounds of synthetic interest.
Resumo:
Alzheimer's disease (AD) is a progressive neurodegenerative pathology with severe economic and social impact. There is currently no cure, although cholinesterase inhibitors provide effective temporary relief of symptoms in some patients. Nowadays drug research and development are based on the cholinergic hypothesis that supports the cognition improvement by regulation of the synthesis and release of acetylcholine in the brain. There are only four commercial medicines approved for treatment of AD and natural products have played an important role in the research for new acetylcholinesterase inhibitors.
Resumo:
The efficiency of a new procedure for the digestion of natural waters, based on a microwave-activated photochemical reactor was evaluated in this work. Fluorescence spectra showed a 99% reduction in the emission of a 40 mg L-1 humic acid solution after 15 min of UV irradiation. In the presence of H2O2, only 3 min were necessary to accomplish a reduction of almost 100% in the emission and 6 min to reduce the concentration of dissolved organic carbon by 95%. The copper recovery from synthetic samples containing commercial humic acid, from soil suspensions, as well as from natural waters varied between 91.5 and 106.6%. The digestion of dissolved and unfiltered samples was successfully accomplished in 6 and 12 min, respectively. No contaminations or sample losses were observed. Results of copper speciation in natural waters showed that this metal is predominantly bound to natural ligands. Only 3-6% of the total recoverable copper is present in the labile form.
Resumo:
This work reports the use of square wave voltammetry (SWV) to analyse the electrochemical reduction of dichlorvos (2, 2-dichlorovinyl-dimethylphosphate) in spiked pure and natural waters. SWV measurements were carried out in 0.5 mol L-1 Na2SO4 aqueous solutions at pH 5, prepared with water originated from three different sources, namely, one sample of purified water and others from two urban creeks in São Carlos County. In all cases, two reduction peaks were observed, at potentials of -0.15 and -1.05 V vs Ag/AgCl, with both current and potential being dependent on pesticide concentration. This allowed the calculation of the following detection limits: 1.0, 2.5 and 3.0x10-8 mol L-1 for purified, Gregorio creek and Monjolinho creek waters, respectively, in a working range between 2.0x10-7 and 1.4x10-6 mol L-1. Recovery measurements found values higher than 80% in all cases, for an added concentration of 4.0 x 10-7 mol L-1 of dichlorvos in each solution. All analytical experiments were performed in triplicate and showed a standard deviation always less than 3%.
Resumo:
Solid municipal waste contains a large volume of polymers and its final disposal is a serious environmental problem. Consequently, the recycling of the principal polymers present in the solid waste is an alternative. In this review we describe the mechanical and chemical recycling of polymers and the energy recovery from plastic wastes. Polymer recycling involves not only the development of processing technologies, but also the solution of many chemical and analytical problems. The technological, economical and social aspects of polymer recycling are also considered.