A Shared European History? Perceptions of Imperialism and Islam in Matriculation Examination Essays and History Textbooks

The European Union (EU) is faced with a continuous decrease in public support. There is a tension between the growing Euroscepticism and the concurrent academic discourse of a shared European identity. Informed and inspired by the current debates, this Master’s Thesis investigates the potential of a shared past to create shared identity. It also addresses the logic of cultural exclusion that is often connected to collective cultural identities. The source material is a combination of exam essays, written as answers to the history tests in the Finnish matriculation examinations of 2005-2008, and upper secondary school history textbooks. From the sources, current perceptions of Islam (as Europe’s Other) and the age of imperialism (as a debated period from Europe’s past) among the youth are studied. Through the analysis the thesis aims to indicate the level of consensus within the pupils’ identification with the past and with Europe. This objective is pursued through examining the pupils’ perceptions of Europe’s past and its relationship to non-European cultures and countries as they are manifested in the essays, and reflecting upon the level of influence that history textbooks as representatives of national hegemonic historical narratives might have on the contents, framings and emphases with and through which the pupils approach, imagine, and reproduce Europe’s past. The approach is based on previous research on the presence of history and the field of textbook research. The theoretical categories with which the sources are analyzed are derived primarily from literature on identity, European integration, history and memory, postcolonial criticism, and theorizations of European identity. Results of the research project suggest that the rhetoric of European superiority, despite its apparent demise, still resonates in contemporary understandings of Europeanness. Dominant perceptions of imperialism comprise of European agency and colonial submission, dominant perceptions of the Islamic world of fundamental difference. Identification with European history among the Finnish youth is rather shallow when examined through perceptions of imperialism; the Islamic world is perceived as Other and its representations are dominated by recent and contemporary international relations.

An Examination of How Entrepreneurs Can Improve Their Position in Relation to Investors

Previous research has been inconclusive regarding the impact of those who invest in entrepreneurs. Consider for a moment how potentially important they are to entrepreneurs. They for example decide who deserves funding, how much time they contribute to their portfolio firms, how they grant entrepreneurs access to their networks, and help entrepreneurs acquire additional funding. In sum, investors potentially have a great impact on the success of entrepreneurs. It is therefore important that we better understand the environment, relationships and context in which parties operate. This thesis contains five articles that explore investors’ and entrepreneurs’ relationships from various viewpoints, in theoretical frameworks, and use a variety of data and research methods. The first article is a literature review that summarises what we know of venture capital, business angel and corporate venture capital funding. The second article studies the entrepreneurs’ investor selection process, its consequences, and identifies key factors that influence the process. Earlier, the common approach has been to concentrate research on the investors’ selection policy, not the entrepreneurs’. The data and conclusions are based on multiple case studies. The article analyses how entrepreneurs can ensure that they get the best possible investor, when it is possible for an entrepreneur to select an investor, and what are the consequences of investor selection. The third article employs power constructs (dependency, power balance/imbalance, power sources) and analyses their applicability in the investor-entrepreneur relationship. Power constructs are extensively studied and utilised in the management and organisation literature. In entrepreneur investor relationships, power aspects are rarely analysed. However, having the ability to “get others to do things they would not otherwise do” is a very common factor in the investor-entrepreneur relationship. Therefore, employing and analysing the applicability of power constructs in this setting is well founded. The article is based on a single case study but suggests that power constructs could be applicable and consequently provide additional insights into the investor-entrepreneur relationship. The fourth article studies the role of advisors in the venture capital investment process and analyses implications for research and practice, particularly from the entrepreneurs’ perspective. The common entrepreneurial finance literature describes the entrepreneur-investor relationship as linear and bilateral. However, it was discovered that advisors may influence the relationship. In this article, the role of advisors, operating procedures and advisors’ impact on different parties is analysed. The fifth article concentrates on investors’ certification effect. The article measures and demonstrates that venture capital investment is likely to increase the credibility (in terms of media attention) of early stage firms, those that most often need additional credibility. Understanding investor certification can affect how entrepreneurs evaluate investment offers and how investors can make their offers appear more lucrative.

A critical re-examination and a revised phase diagram of La1-xSrxCoO3

We report the results of a comprehensive study on dc magnetization, ac susceptibility, and the magnetotransport properties of the La1-xSrxCoO3(0 <= x <= 0.5) system. At higher Sr doping (x >= 0.18), the system exhibits Brillouin-like field cooled magnetization (M-FC). However, for x < 0.18, the system exhibits a kink in the M-FC, a peak at the intermediate field in the thermoremnant magnetization and a non-saturating tendency in the M-H plot that all point towards the characteristic of spin glass behavior. More interestingly, dc magnetization studies for x < 0.18 do not suggest the existence of ferromagnetic correlation that can give rise to an irreversible line in the spin glass regime. The ac susceptibility study for x > 0.2 exhibits apparently no frequency dependent peak shift around the ferromagnetic transition region. However, a feeble signature of glassiness is verified by studying the frequency dependent shoulder position in chi `' (T) and the memory effect below the Curie temperature. But, for x < 0.18, the ac susceptibility study exhibits a considerable frequency dependent peak shift, time dependent memory effect, and the characteristic spin relaxation time scale tau(0) similar to 10(-13) s. The reciprocal susceptibility versus temperature plot adheres to Curie-Weiss behavior and does not provide any signature of preformed ferromagnetic clusters well above the Curie temperature. The magnetotransport study reveals a cross over from metallic to semiconducting-like behavior for x <= 0.18. On the semiconducting side, the system exhibits a large value of magnetoresistance (upto 75%) towards low temperature and it is strongly connected to the spin dependent part of the random potential distribution in the spin glass phase. Based on the above observations, we have reconstructed a new magnetic phase diagram and characterized each phase with associated properties.

Examination of Stress-Fields In Elastic Plastic Indentation

A block of high-purity copper was indented by a 120-degrees diamond-tipped cone. Strain gauges were placed on the surface to measure the radial strains at different surface locations, during loading as well as unloading. The competence of three stress fields proposed for elastic-plastic indentation is assessed by comparing the predicted surface radial strains with those experimentally observed.

An examination of the BEBO model with the results of ab initio calculations of a reaction series

The BEBO (bond energy-bond order) model of Johnston and Parr is examined with the results of ab initio MO calculations on a series of metathetic reactions which involve hydrogen transfer. Energies are calculated at the 6-31G**/PMP2 = full//6-31G** level while the bond orders are estimated using the 6-31G** basis set with the geometry optimisation at the single configuration unrestricted Hartree-Fock frame. Our analysis reveals that the bond-order exponent in the BEBO theory is greater than unity for the reaction series and the entropy term becomes implicitly present in the BEBO model.

Re-examination of compaction characteristics of fine-grained soils

Standard Proctor compaction test data were generated for 3 soils with liquid limit water contents ranging from 48% to 84%. It has been established that by defining a soil by its liquid limit and coarse fraction, the path of compaction for a specific compactive effort can be predicted via a simple density-water content-liquid limit relationship. (Abstract quotes from original text)

Re-examination of crack opening model of interface fracture

The complex singularity associated with a crack at the interface between two dissimilar, isotropic and homogeneous materials leads to mathematical artefacts, such as stress oscillations and crack face interpenetrations in the vicinity of the crack tip. To avoid these unrealistic features, Sinclair (Sinclair GB. On the stress singularity at an interface crack. International Journal of Fracture 1980;16(2):111-9) assumed a finite crack opening angle (COA) such that the singularity lambda became real equal to 1/2. This paper extends the COA model by considering real singularities not necessarily equal to 1/2. When COA is 0 degrees: the interface crack singularity is complex with a real part equal to 1/2. On increasing COA, the imaginary part of the singularity decreases and becomes zero at a threshold value of COA; at this point, the singularity is a real, repeated value. A further increase in COA results in a pair of real singularities. Different crack opening configurations and material combinations are studied, and results presented for threshold COAs and associated values of singularity. Stress analyses for these three regimes: (a) complex, (b) real pair and (c) real repeated singularities, are reported. It is seen that additional complexities are present in the last case. Typical results for stress fields are also included for comparing with standard fields. (C) 1999 Elsevier Science Ltd. All rights reserved.

Compressive fracture features of syntactic foams-microscopic examination

Syntactic foams made by mechanical mixing of polymeric binder and hollow spherical particles are used as core materials in sandwich structured materials. Low density of such materials makes them suitable for weight sensitive applications. The present study correlates various postcompression microscopic observations in syntactic foams to the localized events leading the material to fracture. Depending upon local stress conditions the fracture features of syntactic foam are identified for various modes of fracture such as compressive, shear and tensile. Microscopic observations were also taken at sandwich structures containing syntactic foam as core materials and also at reinforced syntactic foam containing glass fibers. These observations provide conclusive evidences for the fracture features generated under different failure modes. All the microscopic observations were taken using scanning electron microscope in secondary electron mode. (C) 2002 Kluwer Academic Publishers.

Total Factor Productivity Growth and Output Growth in Indian Electronics Industry in the Liberalization Era: An Empirical Examination

This paper analyses the efficiency and productivity growth of Electronics industry, which is considered one of the vibrant and rapidly growing manufacturing industry sub-sectors of India in the liberalization era since 1991. The main objective of the paper is to examine the extent and growth of Total Factor Productivity (TFP) and its components namely, Technical Efficiency Change (TEC) and Technological Progress (TP) and its contribution to total output growth. In this study, the electronics industry is broadly classified into communication equipments, computer hardware, consumer electronics and other electronics, with the purpose of performing a comparative analysis of productivity growth for each of these sub-sectors for the time period 1993-2004. The paper found that the sub-sectors have improved in terms of economies of scale and contribution of capital.The change in technical efficiency and technological progress moved in reverse directions. Three of the four industry witnessed growth in the output primarily due to TFPG and the contribution of input growth to output growth had been negative/negligible, except for Computer hardware where contribution from both input growth and TFPG to output growth were prominent. The paper explored the possible reasons that addressed the issue of low technical efficiency and technological progress in the industry.

A critical examination of the paradox of strength and ductility in ultrafine-grained metals

The paradox of strength and ductility is now well established and denotes the difficulty of simultaneously achieving both high strength and high ductility. This paradox was critically examined using a cast Al-7% Si alloy processed by high-pressure torsion (HPT) for up to 10 turns at a temperature of either 298 or 445 K. This processing reduces the grain size to a minimum of similar to 0.4 mu m and also decreases the average size of the Si particles. The results show that samples processed to high numbers of HPT turns exhibit both high strength and high ductility when tested at relatively low strain rates and the strain rate sensitivity under these conditions is similar to 0.14 which suggests that flow occurs by some limited grain boundary sliding and crystallographic slip. The results are also displayed on the traditional diagram for strength and ductility and they demonstrate the potential for achieving high strength and high ductility by increasing the number of turns in HPT.