Effect of nano-Si2O and nano-Al2O3 on cement mortars for use in agriculture and livestock production

The effect of nano-silica, nano-alumina and binary combinations on surface hardness, resistance to abrasion and freeze-thaw cycle resistance in cement mortars was investigated. The Vickers hardness, the Los Angeles coefficient (LA) and the loss of mass in each of the freeze–thaw cycles to which the samples were subjected were measured. Four cement mortars CEM I 52.5R were prepared, one as control, and the other three with the additions: 5% nano-Si, 5% nano-Al and mix 2.5% n-Si and 2.5% n-Al. Mortars were tested at 7, 28 and 90 d of curing to determine compression strength, total porosity and pore distribution by mercury intrusion porosimetry (MIP) and the relationship between the CSH gel and Portlandite total by thermal gravimetric analysis (TGA). The capillary suction coefficient and an analysis by a scanning electron microscope (SEM) was made. There was a large increase in Vickers surface hardness for 5% n-Si mortar and a slight increase in resistance to abrasion. No significant difference was found between the mortars with nano-particles, whose LA was about 10.8, classifying them as materials with good resistance to abrasion. The microstructure shows that the addition of n-Si in mortars refines their porous matrix, increases the amount of hydrated gels and generates significant changes in both Portlandite and Ettringite. This produced a significant improvement in freeze–thaw cycle resistance. The effect of n-Al on mortar was null or negative with respect to freeze–thaw cycle resistance.

Gerenciamento integrado de resíduos sólidos: estudo de caso no Instituto Butantan

A relevância do gerenciamento de resíduos sólidos justifica-se pelos impactos à saúde e ao meio ambiente. Resíduos gerados em serviços de saúde podem apresentar periculosidade por suas características físico-químicas e biológicas. No Brasil, todo grande gerador é obrigado a elaborar o Plano de Gerenciamento de Resíduos Sólidos, e todo estabelecimento de saúde deve criar o Plano de Gerenciamento de Resíduos de Serviços de Saúde. Objetivo: Desenvolver modelo de gestão de resíduos sólidos para apoiar a elaboração e implantação desses planos em instituições públicas de pesquisa, desenvolvimento e fabricação de produtos de saúde. Métodos: Estudo de caso conduzido no Instituto Butantan, localizado no município de São Paulo/SP. Foi realizado considerando as seguintes etapas: diagnóstico do gerenciamento dos resíduos e elaboração, implantação e avaliação de Plano Integrado de Gerenciamento de Resíduos Sólidos. Todo o processo teve como abordagem a gestão participativa, compartilhada e integrada, envolvendo todos os atores da instituição. Na avaliação foram considerados o atendimento legal quanto à gestão e gerenciamento, às práticas e procedimentos implantados e à atuação dos envolvidos. Resultados: Destacam-se a caracterização e quantificação para cada fluxo de resíduos, a elaboração do Guia Prático de Descarte de Resíduos, o Modelo de Gestão para instituições de pesquisa, desenvolvimento e fabricação de produtos de uso em saúde humana baseado nas premissas do ciclo PDCA e o sistema informatizado de gerenciamento para estruturação e controle da gestão dos resíduos. Conclusões: Verifica-se que o processo desenvolvido ao longo do estudo propiciou mudança de cultura, envolvimento dos funcionários por meio da capacitação contínua para atuação e segurança do trabalhador e melhoria no gerenciamento dos resíduos, promovendo a redução de custos de destinação e a valorização dos resíduos.

Implementing an Integrated Management System (IMS) at an Aerospace Manufacturing Facility

This project analyzes the challenges, issues, benefits, and lessons learned that several companies experienced while implementing integrated management systems. Based on previous experiences, this paper defines several strategies that an organization should use to increase the probability of implementing an integrated management system (IMS) successfully. Strategies include completing a feasibility analysis, creating a policy, allocating resources, developing objectives, modifying documentation, and creating a continuous monitoring process. Moreover, an organization can reduce potential obstacles by promoting a culture that encourages management commitment and employee participation. Results indicate the implementation of an IMS provides the framework to manage environmental, health, and safety programs effectively. By implementing an IMS, an organization can save time and money, as well as proactively control risk.

Surface and Groundwater Environmental Policy Compliance at the Adams County Regional Park and Fairgrounds

The Adams County Regional Park and Fairgrounds must comply with environmental policies related to surface water and groundwater protection. This paper assesses various methods which have proven to be effective in the reduction of nutrients and other contaminants found in surface and groundwater at comparable livestock-based venues. Data was gathered from other facilities in order to identify specific compliance alternatives and evaluate management options. Empirical research, coupled with GIS mapping technology yielded explicit water quality management recommendations for the Adams County Regional Park and Fairgrounds. The outcome of this research and mapping exercise include twelve management recommendations and two site-specific locations for structural BMPs designed to better control water pollution at the Adams County Regional Park and Fairgrounds.

Blending of industrial waste from different sources as partial substitution of Portland cement in pastes and mortars

Binary and ternary combinations of sewage sludge ash (SSA) with marble dust (MD), fly ash (FA) and rice husk ash (RHA) as replacement in Portland cement pastes, were assessed. Several tests were carried out at different curing ages: thermogravimetry, density, water absorption, ultrasonic pulse velocity and mechanical strengths. Pozzolanic effects of the mineral admixtures, densities similar to control sample and improved absorptions when combining waste materials were identified. In general, the compressive strength reaches or exceeds the cement strength class, and blending SSA, FA and RHA (30% cement replacement) increase of strength by 9%, compared to the control sample, was achieved.

Waste water disposal by Connecticut industries, inventory as of January 1, 1961.

"Compiled from basic data files of the Connecticut Water Resources Commission."

Supplementary radiological measurements at the Maxey Flats radioactive waste burial site, 1976-1977 /

Issued Sept. 1978.

Control of particulate matter from oil burners and boilers /

Mode of access: Internet.

Institutional bases for control of nonpoint source pollution under the Clean Water Act, with emphasis on agricultural nonpoint sources /

Mode of access: Internet.

Control of air emissions from materials handling during remediation.

Mode of access: Internet.

An evaluation of vacuum equipment for collection of asbestos waste /

"Contract no. 210-77-0053."

Identification of approaches for the control of health, environmental, and safety hazards associated with air bag use and disposal. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Building air quality : a guide for building owners and facility managers.

Mode of access: Internet.

Beryllium sampling methods: Comparison of two personal sample collection methods with the AEC sample collection method as used for one year in a beryllium production facility. /

Item 499-F-2

Metropolitan Sewer District Mill Creek Facility, Cincinnati, Ohio.

Mode of access: Internet.