Speciation and distribution of the members of the Anopheles punctulatus (Diptera : Culicidae) group in Papua New Guinea

Mosquito collections were made throughout the mainland of Papua New Guinea to identify the members of the Anopheles punctulatus group present and to determine their distribution. Identification was made using morphology, DNA hybridization, and polymerase chain reaction (PCR)-RFLP analysis. Nine members of the group were identified: An. farauti s.s. Laveran, An.farauti 2, An. koliensis Owen, and An. punctulatus Donitz, were common and widespread; An. farauti 4 was restricted to the north of the central ranges where it was common; An. farauti 6 was found only in the highlands above 1,000 m; and An. farauti 3, An. sp. near punctulatus and An. clowi Rozeboom & Knight were uncommon and had restricted distributions. Identification of An. koliensis and An. punctulatus using proboscis morphology was found to be unreliable wherever An. farauti 4 occurred. The distribution and dispersal of the members of the An. punctulatus group is discussed in regard to climate, larval habitats, distance from the coast, elevation, and proximity to human habitation.

Expression of anterior Hox genes during larval development of the gastropod Haliotis asinina

We report the spatial expression patterns of five anterior Hox genes during larval development of the gastropod mollusc Haliotis asinina, an unsegmented spiralian lophotrochozoan. Molecular alignments and phylogenetic analysis indicate that these genes are homologues of Drosophila HOM-C genes labial, proboscipedia, zen, Deformed, and Sex combs reduced, the abalone genes are named Has-Hox1, -Hox2, -Hox3, -Hox4, and -Hox5. Has-Hox transcripts are first detected in the free-swimming trochophore larval stage- and restricted to the posttrochal ectoderm. Has-Hox2, -Hox3, and -Hox4 are expressed in bilaterally symmetrical and overlapping patterns in presumptive neuroectodermal cells on the ventral side of the trochophore. Has-Hox1 expression is restricted to a ring of cells on the dorsoposterior surface, corresponding to the outer mantle edge where new larval shell is being synthesized. There appears to be little change in the expression domains of these Has-Hox genes in pre- and posttorsional veliger larvae, with expression maintained in ectodermal and neuroectodermal tissues. Has-Hox2, -Hox3, -Hox4, and-Hox5 appear to be expressed in a colinear manner in the ganglia and connectives in the twisted nervous system. This pattern is not evident in older larvae. Has-Hox1 and-Hox4 are expressed in the margin of the mantle in the posttorsional veliger, suggesting that Hox genes play a role in gastropod shell formation.

Morphology, ultrastructure, and implied function of ciliated sensory structures on the developmental stages of Merizocotyle icopae (Monogenea : Monocotylidae)

Experimental infections were used to track the fate of the dorsal sensilla of Merizocotyle icopae (Monogenea: Monocotylidae) from nasal tissue of the shovelnose ray, Rhinobatos typus (Rhinobatidae). Scanning and transmission electron microscopy revealed that 3 types of uniciliate dorsal sensilla exist at different times in the development of the monogenean. Type 1 sensilla have little or no invagination where the cilium exits the distal end of the dendrite and possess a ring of epidermis surrounding the cilium distal to the invagination. Type 2 sensilla have a deep invagination where the cilium exits the dendrite. Type 3 sensilla can be distinguished from the other types by the shape of the dendrite. The larvae have predominantly Type I dorsal sensilla, most of which are lost approximately 24 h after infection and a few Type 2 sensilla, which are retained. Additional Type 2 sensilla (termed Adult Type 2 sensilla), which are slightly different morphologically from the Type 2 sensilla of the larvae, form in later stages of development. Numerous Type 3 sensilla are unique to the dorsal surface of adults. Loss of all Type I sensilla upon attachment to the host, R. typus, suggests that these may be chemo- or mechanoreceptors responsible for host location by the swimming infective larvae. Type 2 sensilla appear to be important in the larvae, juveniles, and adults whereas the modality mediated by Type 3 is specific to adults. (C) 2003 Wiley-Liss, Inc.

Effect of poling state and morphology of piezoelectric poly(vinylidene fluoride) membranes for skeletal muscle tissue engineering

This work reports on the influence of polarization and morphology of electroactive poly(vinylidene fluoride), PVDF, on the biological response of myoblast cells. Non-poled, ‘‘poled +’’ and “poled-“ -PVDF were prepared in the form of films. Further, random and aligned electrospun -PVDF fiber mats were also prepared. It is demonstrated that negatively charged surfaces improve cell adhesion and proliferation and that the directional growth of the myoblast cells can be achieved by the cell culture on oriented fibers. Therefore, the potential application of electroative materials for muscle regeneration is demonstrated.

Morphology and stability of aggregates of an Oxisol according to tillage system and gypsum application

Morphological characterization and aggregate stability is an important factor in evaluating management systems. The aim of this paper is to evaluate the stability and morphology of the aggregates of a dystrophic Oxisol managed with no-tillage and conventional tillage with and without the residual action of gypsum. The experimental design was randomized blocks arranged in split-split plot, where the treatments were two soil management systems (plots) with 0 and 2000 kg ha-1 of gypsum (subplots) and five depths (0-0.05, 0.05-0.10, 0.10-0.15, 0.15-0.20 and 0.20-0.30 m) as the subsubplots, with four replications. The aggregate morphology was determined through images and later evaluated by the Quantporo software. Stability was determined by the wet method. The results showed that the no-tillage system, with or without gypsum residual effect, provided the aggregates with the largest geometric diameters. The combination of no-tillage system and the gypsum residual effect provided rougher aggregates.

Effect of filler content on morphology and physical-chemical characteristics of poly(vinylidene fluoride)/NaY-zeolite filled membranes

Poly(vinylidene fluoride) electrospun membranes have been prepared with different NaY zeolite contents up to 32%wt. Inclusion of zeolites induces an increase of average fiber size from ~200 nm in the pure polymer up to ~500 nm in the composite with 16%wt zeolite content. For higher filler contents, a wider distribution of fibers occurs leading to a broader size distributions between the previous fiber size values. Hydrophobicity of the membranes increases from ~115º water contact angle to ~128º with the addition of the filler and is independent on filler content, indicating a wrapping of the zeolite by the polymer. The water contact angle further increases with fiber alignment up to ~137º. Electrospun membranes are formed with ~80 % of the polymer crystalline phase in the electroactive  phase, independently on the electrospinning processing conditions or filler content. Viability of MC3T3-E1 cells on the composite membranes after 72 h of cell culture indicates the suitability of the membranes for tissue engineering applications.

Biologia de Anopheles (Kerteszia) neivai H., D. & K., 1913 (Diptera: Culicidae) en la costa Pacífica de Colombia: I. Fluctuación de la población larval y características de sus criaderos

En Charambirá, localidad del município de Istmina (Chocó) en la costa Pacífica de Colombia, donde existe un problema de malaria endémica, se estudió la fluctuación de la población larval y las características de los criaderos de Anopheles (Kerteszia) neivai, especie considerada como posible vectora de malaria en esa región del país. La vegetación circundante fue dividida en tres estratos de acuerdo al grado de cobertura foliar. Se demarcaron cuadrantes de 100 m² en cada estrato para el muestreo de plantas epífitas de la família Bromeliaceae, en las cuales se acumula agua que sirve como criadero para esta especie de anofelino. Se tomaron datos de temperatura, pH y volumen del agua contenida en cada bromelia. El mayor número de larvas se detectó en el estrato 1 (manglar) a una altitud inferior a 4 m, pero no se encontró evidencia significativa de estratificación vertical de la población larval de A. neivai hasta los 8 m. Se evidenció una correlación lineal positiva entre el número de larvas y el volumen de agua contenida en cada bromelia; por otra parte se observó también una correlación directa entre la precipitación mensual acumulada y la fluctuación poblacional de esta especie. Los índices larvales mas altos se observaron entre los meses de marzo a abril y de julio a agosto. La mortalidad larval fue alta en el primer estadío (43,5%) y solo un 23,7% sobrevivió hasta el cuarto.

Avaliação do desenvolvimento larval de Anopheles darlingi criado em laboratório sob diferentes dietas

São testadas três dietas para larvas de A. darlingi, buscando-se os seguintes parâmetros indicativos de desenvolvimento nesta fase: tempo de evolução total e de cada estádio, sobrevivência ao estádio, diária e total. A metodologia utilizada na determinação desses parâmetros constitui-se da combinação de dois métodos de análise da estatística vital, adaptados ao estudo de populações mantidas em laboratório. Os tempos de evolução total e de cada estádio foram determinados gráficamente a partir das curvas de tendência dos estádios medianos da colônia, em inspeções sucessivas. Os valores de sobrevivência diária, ao estádio e total foram calculados a partir de tábuas de sobrevivência. Os resultados permitiram eleger a dieta composta de uma parte de farinha de peixe para duas partes de farinha de pão e duas partes de germe de trigo como a mais adequada ao desenvolvimento larval, com duração de 12,9 dias entre o primerio estádio e a emersão do adulto e sobrevivência total de 95%.

Duration of larval and pupal development stages of Aedes albopictus in natural and artificial containers

Aedes albopictus were reared in different containers: a tree hole, a bamboo stump and an auto tire. The total times from egg hatching to adult emergence were of 19.6,27.3 and 37.5 days, respectively, according to the container. The first, second and third-instar larvae presented growth periods with highly similar durations. The fourth-instar larvae was longer than the others stages. The pupation time was longer than the fourth-instar larvae growth period. The temperature of the breeding sites studied, which was of 18° C to 22° C on average, was also taken into consideration. The mortality of the immature stages was analysed and compared as between the experimental groups; it was lower in the natural containers than in the discarded tire. The average wing length of adult females emerging from tree hole was significantly larger (p < 0.05) than that of those emerging from the tire.

Human case of gastric infection by a fourth larval stage of Pseudoterranova decipiens (Nematoda, Anisakidae)

Only three cases of human infection by anisakid nematodes have been reported in Chile since 1976. In the present case, an anisakid worm, identified as a fourth-stage Pseudoterranova decipiens larva, was removed with a gastroendoscopic biopsy clipper from the stomach of a 45 year-old man from southern Chile. The patient, who presented acute epigastric pain and a continuous sensation of having an empty stomach, reported having eaten smoked fish. The worm was fixed in 70% ethanol and cleaned in lactophenol for morphological study. The morphometric characteristics of the worm are described and drawn. Anisakid larvae in fish flesh can be killed by freezing or cooking.

Susceptibilidade larval de duas populações de Aedes egypti a inseticidas químicos

OBJETIVO: A susceptibilidade dos insetos tem sido um dos mais importantes aspectos a ser monitorados em programas de saúde pública que tratam do controle de vetores. O estudo objetiva avaliar a susceptibilidade de larvas de Aedes aegypti a inseticidas químicos em áreas sujeitas ou não a controle. MÉTODOS: Bioensaios foram realizados com concentração de diagnóstico e concentração múltipla, segundo padrão da Organização Mundial de Saúde para as coletas de larvas de Aedes aegypti, em uma área não sujeita -- Campinas, SP -- e em uma outra área sujeita -- Campo Grande, MS -- a tratamentos químicos de controle. RESULTADOS: Larvas de Aedes aegypti coletadas em Campinas indicaram resistência potencial à concentração-diagnóstico (CD) de 0,04 ppm do organofosforado temephos. O teste de concentração múltipla registrou sobrevivência de 24,5% à concentração de 0,0125 ppm. A susceptibilidade dessa mesma linhagem foi avaliada para o organofosforado fenitrothion (CD=0,08 ppm) e o piretróide cipermetrina (CD=0,01 ppm), resultando em valores normais para essas concentrações. Larvas de Ae. aegypti coletadas em Campo Grande mostraram susceptibilidade normal ao temephos (CD=0,04 ppm) e à cipermetrina (CD=0,01 ppm). Também foram estabelecidas as CL50 e as CL95 de cipermetrina 25 CE, cyfluthrin 5 CE, betacyfluthrin 1,25 SC e propoxur 20 CE para Ae. aegypti. Com base nos dados da linhagem-padrão Rockefeller, foram estimadas as razões de resistência de 2,9, 2,2, 2,4 e 1,3, respectivamente, pela CL50, e de 3,5, 2,6, 3,9 e 1,3 pela CL95. CONCLUSÃO: Os resultados reforçam a necessidade de avaliações prévias e monitoramento da efetividade dos inseticidas que devem ser usados em programas de controle de mosquitos.

Susceptibilidade larval de populações de Aedes aegypti e Culex quinquefasciatus a inseticidas químicos

OBJETIVO: Avaliar a susceptibilidade a inseticidas químicos de larvas de Culex quinquefasciatus e Aedes aegypti, provenientes de áreas sujeitas ou não a tratamentos de controle. MÉTODOS: Foram coletadas larvas de mosquitos em uma área não sujeita a tratamentos com inseticidas (Campinas, SP) e em áreas sujeitas a esses tratamentos (Campo Grande, MS e Cuiabá, MT). Foram usados bioensaios com concentrações diagnóstico e concentrações múltipla de inseticidas organofosforados e piretróides, segundo padrão da Organização Mundial de Saúde, para avaliar a susceptibilidade dessas larvas. RESULTADOS: Ensaios com larvas de Culex quinquefasciatus de Campinas, SP, permitiram a suspeita de resistência à cipermetrina e evidenciaram resistência à ciflutrina. Larvas dessa espécie coletadas em Campo Grande, MS, e Campinas, SP, apresentaram resistência ao temephos. Para a colônia campineira desta espécie, foram estabelecidas as razões de resistência: RR50=6,36 e RR95=4,94, com base em linhagem susceptível padrão. Adicionalmente, os testes com Aedes aegypti mostraram susceptibilidade similar ao temephos em uma população de campo (Cuiabá, MT) e uma de laboratório. CONCLUSÕES: Os resultados indicam resistência a organofosforado e piretróides em Culex quinquefasciatus, evidenciando a necessidade de avaliações e monitoramento da efetividade dos inseticidas a serem usados nos programas de controle de mosquitos.

Influence of crystallite size of nanophased hydroxyapatite on fibronectin and osteonectin adsorption and on MC3T3-E1 osteoblast adhesion and morphology

The characteristic topographical features (crystallite dimensions, surface morphology and roughness) of bioceramics may influence the adsorption of proteins relevant to bone regeneration. This work aims at analyzing the influence of two distinct nanophased hydroxyapatite (HA) ceramics, HA725 and HA1000 on fibronectin (FN) and osteonectin (ON) adsorption and MC3T3-E1 osteoblast adhesion and morphology. Both substrates were obtained using the same hydroxyapatite nanocrystals aggregates and applying the sintering temperatures of 725ºC and 1000ºC, respectively. The two proteins used in this work, FN as an adhesive glycoprotein and ON as a counter-adhesive protein, are known to be involved in the early stages of osteogenesis (cell adhesion, mobility and proliferation). The properties of the nanoHA substrates had an important role in the adsorption behavior of the two studied proteins and clearly affected the MC3T3- E1 morphology, distribution and metabolic activity. HA1000 surfaces presenting slightly larger grain size, higher root-mean-square roughness (Rq), lower surface area and porosity, allowed for higher amounts of both proteins adsorbed. These substrates also revealed increased number of exposed FN cell-binding domains as well as higher affinity for osteonectin. Regarding the osteoblast adhesion results, improved viability and cell number were found for HA1000 surfaces as compared to HA725 ones, independently of the presence or type of adsorbed protein. Therefore the osteoblast adhesion and metabolic activity seemed to be more sensitive to surfaces morphology and roughness than to the type of adsorbed proteins.

The effect of metal transfer stability (spattering) on fume generation, morphology and composition in short-circuit MAG welding

The main objective of this work was to evaluate the hypothesis that the greater transfer stability leads also to less volume of fumes. Using an Ar + 25%CO2 blend as shielding gas and maintaining constant the average current, wire feed speed and welding speed, bead-on-plate welds were carried out with plain carbon steel solid wire. The welding voltage was scanned to progressively vary the transfer stability. Using two conditions of low stability and one with high stability, fume generation was evaluated by means of the AWS F1.2:2006 standard. The influence of these conditions on fume morphology and composition was also verified. A condition with greater transfer stability does not generate less fume quantity, despite the fact that this condition produces fewer spatters. Other factors such as short-circuit current, arcing time, droplet diameters and arc length are the likely governing factors, but in an interrelated way. Metal transfer stability does not influence either the composition or the size/morphology of fume particulates. (c) 2014 Elsevier B.V. All rights reserved.

Surface morphology and phase transformations of femtosecond laser-processed saphire

The morphological and structural modifications induced in sapphire by surface treatment with femtosecond laser radiation were studied. Single-crystal sapphire wafers cut parallel to the (0 1 2) planes were treated with 560 fs, 1030 nm wavelength laser radiation using wide ranges of pulse energy and repetition rate. Self-ordered periodic structures with an average spatial periodicity of similar to 300 nm were observed for fluences slightly higher than the ablation threshold. For higher fluences the interaction was more disruptive and extensive fracture, exfoliation, and ejection of ablation debris occurred. Four types of particles were found in the ablation debris: (a) spherical nanoparticles about 50 nm in diameter; (b) composite particles between 150 and 400 nm in size; (c) rounded resolidified particles about 100-500 nm in size; and (d) angular particles presenting a lamellar structure and deformation twins. The study of those particles by selected area electron diffraction showed that the spherical nanoparticles and the composite particles are amorphous, while the resolidified droplets and the angular particles, present a crystalline a-alumina structure, the same of the original material. Taking into consideration the existing ablation theories, it is proposed that the spherical nanoparticles are directly emitted from the surface in the ablation plume, while resolidified droplets are emitted as a result of the ablation process, in the liquid phase, in the low intensity regime, and by exfoliation, in the high intensity regime. Nanoparticle clusters are formed by nanoparticle coalescence in the cooling ablation plume. (C) 2013 Elsevier B.V. All rights reserved.