Criterios de restauración, intervención y revitalización del patrimonio industrial : la fábrica de gas de San Paolo en Roma

La tesis está centrada en el patrimonio industrial, y trata de ahondar en los temas enunciados en el título, Criterios de restauración, intervención y revitalización del patrimonio industrial (capítulo 1). La fábrica de gas de San Paolo en Roma (capítulo 2): En el primer capítulo, se profundiza en los criterios institucionalizados de actuación en el patrimonio, pero también se habla sobre la singularidad, los valores originales, estratificados en cada construcción y su contexto. Ello resume la intención de la doctoranda al entender la necesidad del análisis de cada obra en modo profundo, concreto y abierto a novedosos acercamientos, antes de su transformación. Al hablar de intervención frente a restauración, se aborda la conocida polémica que plantea el modo de acercarse al legado histórico. Parece necesario enunciar cómo se consideran en el trabajo estos términos. Mientras la restauración (como diría Cesare Brandi, constituye el momento metodológico del reconocimiento de la obra de arte en su consistencia física y en su doble polaridad estética e histórica, en orden a su transmisión al futuro) es una acción más restrictiva, que implica atención suma a la recuperación y conservación de los valores significativos y únicos del bien, en comunicación con un (posible) equipo interdisciplinar; por intervención se entiende aquí un desarrollo más personal y libre por parte del proyectista, en el que se produce un proceso dialéctico entre la preexistencia y el posicionamiento crítico adoptado a la hora de dar un obligado nuevo uso a ese bien. Es decir, el contraste está en el diferente reconocimiento de la materialidad física y sus significados. En torno a la restauración/intervención, se analizan las perspectivas de actuación en España e Italia, contrastando factores como la formación del arquitecto o el entorno laboral-cultural, y utilizando el método analítico comparativo de casos. Habría un tercer concepto: el de revitalización del patrimonio industrial, Éste hace referencia a su transformación, a sus usos más comunes y compatibles, a la redimensión artística que ha experimentado la arquitectura industrial gracias al arte contemporáneo y a su relación con la Modernidad. Por último, se enuncia en el título el caso de estudio, la Fábrica, que ocupa el segundo capítulo. Se trata de un enorme conjunto industrial singular semi abandonado en el confín del centro histórico, cuyo protagonista es un gran gasómetro, que la autora ha tenido la oportunidad de descubrir en su estancia en la Ciudad Eterna. Este barrio constituyó el primer y único sector industrial de la Roma moderna a inicios del siglo XX. Por varias causas históricas y voluntad política, la ciudad prácticamente no tuvo más desarrollo industrial que el área mencionada, donde se implantaron servicios y actividades de gran transformación (Matadero, Mercados Generales, Almacenes Fluviales, Central Montemartini o esta fábrica). A partir de 1920, se empezó a construir un tejido productivo que la llevó de la situación de posguerra al milagro económico. Frente al mito de la Roma monumental o de la Roma cotidiana, aparece el aspecto industrial como mito de la contemporaneidad. Sin embargo, esta ciudad es demasiado antigua como para convertirse en moderna, y su proceso industrial en contraste con su larga historia resulta breve. La inmediata relación de la fase industrial romana con el resultado de este desarrollo viene identificada con las instalaciones señaladas, más significativas por su excepcionalidad que por la duración del momento irrepetible que representan. Su presencia física perdura a pesar de su abandono, aisladas tras su muro perimetral y casi desconocidas. Esto las hace apetecibles para la especulación inmobiliaria y resultan un caso de estudio ideal para realizar un Plan de Intervención Global, en el que determinar una serie de intervenciones necesarias, usos compatibles y directrices para la ordenación del conjunto, coherentes con los conceptos manejados en el primer capítulo. ABSTRACT The thesis focuses on industrial heritage, delving into the topics listed in its title, Criteria for the restoration, intervention and revitalisation of industrial heritage (chapter 1). The San Paolo gas factory in Rome (chapter 2): Chapter one elaborates on the official criteria to take action on heritage, but also deals with the singularity and original values unique to each construction and its context. This underlines the PhD candidate’s intentions by understanding the need for an in-depth and specific analysis, open to novel approaches to each site before its transformation. When speaking of intervention, as opposed to restoration, we address the well-known controversy that stems from the different ways of approaching historical heritage. It seems necessary to explain how these terms are interpreted in this piece of work. Whereas restoration (as Cesare Brandi would say, constitutes the methodological moment in which the work of art is appreciated in its material form and in its historical and aesthetic duality, with a view to transmitting it to the future) is a more restrictive action, demanding the utmost attention to the recovery and preservation of the piece of heritage’s defining and exceptional values, (ideally) in communication with a interdisciplinary team. By intervention, we hereby understand a more personal and free procedure carried out by the designer in which a dialectical process takes place between preexistence and the critical stance taken in order to give that good a much needed new use. That is, contrast lies in the different recognition of physical materiality and its meanings. As for the restoration/intervention dilemma, the different courses of action followed in Spain and Italy will be analysed, contrasting the architects’ training, the labourcultural environment and taking an analytical comparative case study method. There is a third concept: the revitalisation of industrial heritage, which refers to its transformation, its most common and compatible uses, the artistic redimensioning that industrial architecture has experienced thanks to contemporary art, and its relationship with Modernity. Lastly, the title refers to the case study, i.e., the analysis of the Factory, which makes up chapter 2. It is an enormous and semiabandoned peerless industrial complex on the edge of the historical city centre whose main landmark is a huge gasometer, which the author had the chance to discover during her stay in the Eternal City. This district made up the first and only industrial sector in the modern Rome of the early 20th century. Due to a number of reasons, both historical and political, barely no further industrial development took place in the city beyond the mentioned area, where processing services and activities were set up (Slaughterhouse, General Markets, Riverside Warehouses, Montemartini Power Plant or the said factory). In the 1920s began the construction of the productive fabric that raised the city from its postwar plight to the economic miracle. As opposed to the myth of monumental Rome and daily-life Rome, this industrial Rome rose as contemporaneity’s myth. However, this city is too ancient to become modern, and its industrial process strikes us as brief when confronted with its long history. The close relationship between Rome’s industrial stage and the consequences of this development is best represented by the aforementioned facilities, more relevant due to their uniqueness than the length of the once-in-a-lifetime moment they represent. Their physical presence lives on despite abandonment and isolation, as they stand vastly unknown behind their perimeter walls. This renders them appealing to property speculators, becoming an ideal case study for the creation of a Global Intervention Plan in which to determine a series of necessary actions, compatible uses and directives, all of them consistent with the concepts dealt with in chapter 1. RIASSUNTO La tesi è focalizzata sul patrimonio industriale e cerca di approfondire le tematiche contenute nel titolo, Criteri di restauro, intervento e rivitalizzazione del patrimonio industriale (capitolo 1). La Fabbrica del gas di San Paolo a Roma (capitolo 2): Nel primo capitolo vengono presi in esame i criteri istituzionalizzati di attuazione nel patrimonio, ma si parla anche della unicità, i valori originali, stratificati in ogni costruzione ed il suo contesto. Questo riassume l’intenzione della dottoranda di capire la necessità dell’analisi di ogni opera in modo profondo, concreto e aperto a nuovi approcci, prima della sua trasformazione. Nel parlare di intervento versus restauro, si affronta la famosa polemica che considera il modo di avicinarsi all’eredità storica. Appare necessario precisare come questi termini sono considerati in questo lavoro. Mentre il restauro (come direbbe Cesare Brandi, costituisce il momento metodologico del riconoscimento dell’opera d’arte nella sua consistenza fisica e nella duplice polarità estetica e storica, in vista della sua trasmissione nel futuro) è un’azione più restrittiva, e quindi implica massima attenzione al recupero e conservazione dei valori significativi ed unici del bene, in comunicazione con una (eventuale) squadra interdisciplinare; per intervento si intende qui un processo più personale e libero del progettista, nel quale si produce uno sviluppo dialettico tra la preesistenza e la posizione critica adottata quando si deve dare un nuovo uso di quel bene. Vale a dire che il contrasto risiede nel diverso riconoscimento della materialità fisica e i loro significati. Intorno al restauro / intervento, si analizzano le prospettive di attuazione in Spagna e Italia, contrastando diversi fattori come la formazione dell’architetto o l’ambiente lavorativo-culturale, ed impiegando il metodo analitico comparativo dei casi. Ci sarebbe un terzo concetto: quello della rivitalizzazione del patrimonio industriale. Questo fa riferimento alla sua trasformazione, ai suoi usi più comuni e compatibili, al ridimensionamento artistico vissuto dall’archeologia industriale grazie all’arte contemporanea ed al suo rapporto con la Modernità. In ultimo, si enuncia nel titolo il caso di studio, ovvero l’analisi della Fabbrica, che occupa il secondo capitolo. Si tratta di un enorme complesso industriale semi-abbandonato al confine con il centro storico, il cui protagonista è un grande gasometro, che l’autrice ha avuto modo di scoprire durante il suo soggiorno nella Città Eterna. Questo quartiere costituì il primo e unico moderno settore industriale della Roma moderna all’inizio del Novecento. Per diverse ragioni storiche e volontà politiche, la città praticamente non ha subito ulteriore sviluppo industriale oltre l’area citata, dove si impiantarono servizi e attività di grande trasformazione (Mattatoio, Mercati Generali, Magazzini Generali, Centrale Montemartini o questa fabbrica). Dal 1920, si inizió a costruire un tessuto prodottivo che portò la città dalla situazione post-bellica al miracolo economico. Di fronte al mito della Roma monumentale o della Roma quotidiana, appare questa Roma industriale come mito della contemporaneità. Tuttavia, questa città è troppo antica per diventare moderna, ed il suo processo industriale in contrasto con la sua lunga storia risulta breve. Il rapporto diretto della fase industriale romana con il risultato di questo sviluppo viene identificato con gli impianti segnalati, più significativi per la loro unicità che per la durata del momento irripetibile che rappresentano. La loro presenza fisica perdura nonostante l’abbandono, isolati dietro il loro muro di cinta e quasi sconosciuti. Questo li rende auspicabile per la speculazione immobiliare e sono un caso ideale per eseguire un Piano di Intervento Globale, che determini una serie di interventi necessari, usi compatibili e linee guida per la pianificazione del tutto, in linea con i concetti utilizzati nel primo capitolo.

A UNIVERSIDADE CORPORATIVA E O TREINAMENTO INDUSTRIAL A DISTÂNCIA PARA PROFISSIONAIS DE MANUTENÇÃO

Este trabalho trata dos principais aspectos envolvidos na avaliação e características conceituais acerca dos fundamentos e práticas do ensino a distância enfocando o treinamento industrial a distância para profissionais de manutenção, utilizando a internet como principal ferramenta e o desafio de relacionar a tecnologia com a metodologia voltada para o profissional técnico operacional. A internet é uma ferramenta que pode ser utilizada para o ensino em geral, ela permite acesso fácil a uma infinidade de material informativo autêntico e atualizado, além de exemplos concretos e interativos na perspectiva de transformar a informação recebida por meios eletrônicos em conhecimento sólido adquirido. Diante disso, a análise do trabalho recai, num primeiro momento, sobre os pressupostos que criaram o treinamento industrial, o treinamento na área de manutenção industrial e, os aspectos da estrutura que cria o treinamento industrial a distância, em seguida, aprofundamos-nos no conhecimento acerca das técnicas que envolvem o treinamento para profissionais da área de manutenção industrial a distância. Também é apresentada a experiência dos cursos profissionalizantes a distância através de vários meios e a experiências dos portais de educação a distância voltados para área de manutenção industrial.

A UNIVERSIDADE CORPORATIVA E O TREINAMENTO INDUSTRIAL A DISTÂNCIA PARA PROFISSIONAIS DE MANUTENÇÃO

Este trabalho trata dos principais aspectos envolvidos na avaliação e características conceituais acerca dos fundamentos e práticas do ensino a distância enfocando o treinamento industrial a distância para profissionais de manutenção, utilizando a internet como principal ferramenta e o desafio de relacionar a tecnologia com a metodologia voltada para o profissional técnico operacional. A internet é uma ferramenta que pode ser utilizada para o ensino em geral, ela permite acesso fácil a uma infinidade de material informativo autêntico e atualizado, além de exemplos concretos e interativos na perspectiva de transformar a informação recebida por meios eletrônicos em conhecimento sólido adquirido. Diante disso, a análise do trabalho recai, num primeiro momento, sobre os pressupostos que criaram o treinamento industrial, o treinamento na área de manutenção industrial e, os aspectos da estrutura que cria o treinamento industrial a distância, em seguida, aprofundamos-nos no conhecimento acerca das técnicas que envolvem o treinamento para profissionais da área de manutenção industrial a distância. Também é apresentada a experiência dos cursos profissionalizantes a distância através de vários meios e a experiências dos portais de educação a distância voltados para área de manutenção industrial.

Streamflow recharge to the Madison Limestone and the Casper Formation in the Glenrock area, east-central Wyoming /

Mode of access: Internet.

Salt report for the B & O area.

Mode of access: Internet.

Gas dispersion measurements in industrial flotation cells

For nearly 100 years, the flotation plant metallurgist has often wondered what is happening 'beneath the froth'. To assist in unravelling this mystery, new technology has been developed as part of the Australian Mineral Industries Research Association (AMIRA) P9 project, to measure gas dispersion characteristics (such as gas hold-up, superficial gas velocity and bubble size) in industrial flotation cells. These measurements have been conducted in a large number of cells of different types and sizes by researchers from the Julius Kruttschnitt Mineral Research Centre (JKMRC) and JKTech. A large database has been developed and the contents of this database are described in this paper. Typical cell characterization measurements show a wide spread in values, even in the same cell types and sizes performing similar duties. In conventional flotation cells, the typical gas hold-up values range from 3% to 20%, bubble sizes range between I and 2 mm, and superficial gas velocity ranges from 1 to 2.5 cm/s. The ranges of cell characterization measurements given in this paper will enable plant personnel to compare their operation to other similar types of operations from around Australia and the rest of the world, giving opportunities for further improvement to flotation plant operations. (C) 2005 Elsevier Ltd. All rights reserved.

A UNIVERSIDADE CORPORATIVA E O TREINAMENTO INDUSTRIAL A DISTÂNCIA PARA PROFISSIONAIS DE MANUTENÇÃO

Este trabalho trata dos principais aspectos envolvidos na avaliação e características conceituais acerca dos fundamentos e práticas do ensino a distância enfocando o treinamento industrial a distância para profissionais de manutenção, utilizando a internet como principal ferramenta e o desafio de relacionar a tecnologia com a metodologia voltada para o profissional técnico operacional. A internet é uma ferramenta que pode ser utilizada para o ensino em geral, ela permite acesso fácil a uma infinidade de material informativo autêntico e atualizado, além de exemplos concretos e interativos na perspectiva de transformar a informação recebida por meios eletrônicos em conhecimento sólido adquirido. Diante disso, a análise do trabalho recai, num primeiro momento, sobre os pressupostos que criaram o treinamento industrial, o treinamento na área de manutenção industrial e, os aspectos da estrutura que cria o treinamento industrial a distância, em seguida, aprofundamos-nos no conhecimento acerca das técnicas que envolvem o treinamento para profissionais da área de manutenção industrial a distância. Também é apresentada a experiência dos cursos profissionalizantes a distância através de vários meios e a experiências dos portais de educação a distância voltados para área de manutenção industrial.

A study on the flow characteristics of an industrial radiant tube burner

The thesis presents an experimentally validated modelling study of the flow of combustion air in an industrial radiant tube burner (RTB). The RTB is used typically in industrial heat treating furnaces. The work has been initiated because of the need for improvements in burner lifetime and performance which are related to the fluid mechanics of the com busting flow, and a fundamental understanding of this is therefore necessary. To achieve this, a detailed three-dimensional Computational Fluid Dynamics (CFD) model has been used, validated with experimental air flow, temperature and flue gas measurements. Initially, the work programme is presented and the theory behind RTB design and operation in addition to the theory behind swirling flows and methane combustion. NOx reduction techniques are discussed and numerical modelling of combusting flows is detailed in this section. The importance of turbulence, radiation and combustion modelling is highlighted, as well as the numerical schemes that incorporate discretization, finite volume theory and convergence. The study first focuses on the combustion air flow and its delivery to the combustion zone. An isothermal computational model was developed to allow the examination of the flow characteristics as it enters the burner and progresses through the various sections prior to the discharge face in the combustion area. Important features identified include the air recuperator swirler coil, the step ring, the primary/secondary air splitting flame tube and the fuel nozzle. It was revealed that the effectiveness of the air recuperator swirler is significantly compromised by the need for a generous assembly tolerance. Also, there is a substantial circumferential flow maldistribution introduced by the swirier, but that this is effectively removed by the positioning of a ring constriction in the downstream passage. Computations using the k-ε turbulence model show good agreement with experimentally measured velocity profiles in the combustion zone and proved the use of the modelling strategy prior to the combustion study. Reasonable mesh independence was obtained with 200,000 nodes. Agreement was poorer with the RNG  k-ε and Reynolds Stress models. The study continues to address the combustion process itself and the heat transfer process internal to the RTB. A series of combustion and radiation model configurations were developed and the optimum combination of the Eddy Dissipation (ED) combustion model and the Discrete Transfer (DT) radiation model was used successfully to validate a burner experimental test. The previously cold flow validated k-ε turbulence model was used and reasonable mesh independence was obtained with 300,000 nodes. The combination showed good agreement with temperature measurements in the inner and outer walls of the burner, as well as with flue gas composition measured at the exhaust. The inner tube wall temperature predictions validated the experimental measurements in the largest portion of the thermocouple locations, highlighting a small flame bias to one side, although the model slightly over predicts the temperatures towards the downstream end of the inner tube. NOx emissions were initially over predicted, however, the use of a combustion flame temperature limiting subroutine allowed convergence to the experimental value of 451 ppmv. With the validated model, the effectiveness of certain RTB features identified previously is analysed, and an analysis of the energy transfers throughout the burner is presented, to identify the dominant mechanisms in each region. The optimum turbulence-combustion-radiation model selection was then the baseline for further model development. One of these models, an eccentrically positioned flame tube model highlights the failure mode of the RTB during long term operation. Other models were developed to address NOx reduction and improvement of the flame profile in the burner combustion zone. These included a modified fuel nozzle design, with 12 circular section fuel ports, which demonstrates a longer and more symmetric flame, although with limited success in NOx reduction. In addition, a zero bypass swirler coil model was developed that highlights the effect of the stronger swirling combustion flow. A reduced diameter and a 20 mm forward displaced flame tube model shows limited success in NOx reduction; although the latter demonstrated improvements in the discharge face heat distribution and improvements in the flame symmetry. Finally, Flue Gas Recirculation (FGR) modelling attempts indicate the difficulty of the application of this NOx reduction technique in the Wellman RTB. Recommendations for further work are made that include design mitigations for the fuel nozzle and further burner modelling is suggested to improve computational validation. The introduction of fuel staging is proposed, as well as a modification in the inner tube to enhance the effect of FGR.

New technology, industrial relations and white collar trade unions : the case of the National and Local Government Officers Association

The decade since 1979 has seen the most rapid introduction of microelectronic technology in the workplace. In particular, the scope offered for the application of this new technology to the area of white collar work has meant that it is a sector where trade unions have been confronted with major challenges. However the application of this technology has also provided trade unions with opportunities for exerting influence to reshape traditional attitudes to both industrial relations and the nature of work. Recent academic research on the trade union response to the introduction of new technology at the workplace suggests that, despite the resources and apparent sophistication of modern trade unions, they have not in general been able to take advantage of the opportunities offered during this period of radical technological change,the argument being that this is due both to structural weaknesses and the inappropriateness of the system of collective bargaining where new technology issues are concerned. Despite the significance of the Public Sector in employment terms, research into the response of public sector white collar trade unions to technological change has been fairly limited. This thesis sets out the approach of the National and Local Government Officers Association (NALGO), the largest solely white collar union in the world with over three quarters of a million members employed in a wide range of public service industries. The thesis examines NALGO's response at national level and, through detailed case studies, at local level in respect of Local Government and Water Industry NALGO members. The response is then evaluated and conclusions drawn in terms of a framework based upon an assessment of the key factors relevant in judging the ability of NALGO to respond effectively to the challenges brought about by the technological revolution of the last ten years.

Business cycles, long waves, and company langevity in Birmingham area metal industries 1780-1980

This doctoral thesis originates from an observational incongruence between the perennial aims and aspirations of economic endeavour and actually recorded outcomes, which frequently seem contrary to those intended and of a recurrent, cyclical type. The research hypothesizes parallel movement between unstable business environments through time, as expressed by periodically fluctuating levels of economic activity, and the precipitation rates of industrial production companies. A major problem arose from the need to provide theoretical and empirical cohesion from the conflicting, partial and fragmented interpretations of several hundred historians and economists, without which the research question would remain unanswerable. An attempt to discover a master cycle, or superimposition theorem, failed, but was replaced by minute analysis of both the concept of cycles and their underlying data-bases. A novel technique of congregational analysis emerged, resulting in an integrated matrix of numerical history. Two centuries of industrial revolution history in England and Wales was then explored and recomposed for the first time in a single account of change, thereby providing a factual basis for the matrix. The accompanying history of the Birmingham area provided the context of research into the failure rates and longevities of firms in the city's staple metal industries. Sample specific results are obtained for company longevities in the Birmingham area. Some novel presentational forms are deployed for results of a postal questionnaire to surviving firms. Practical demonstration of the new index of national economic activity (INEA) in relation to company insolvencies leads to conclusions and suggestions for further applications of research into the tempo of change, substantial Appendices support the thesis and provide a compendium of information covering immediately contiguous domains.

Identification of industrial sources of airborne heavy metal pollution in urban areas

The research examines the deposition of airborne particles which contain heavy metals and investigates the methods that can be used to identify their sources. The research focuses on lead and cadmium because these two metals are of growing public and scientific concern on environmental health grounds. The research consists of three distinct parts. The first is the development and evaluation of a new deposition measurement instrument - the deposit cannister - designed specifically for large-scale surveys in urban areas. The deposit cannister is specifically designed to be cheap, robust, and versatile and therefore to permit comprehensive high-density urban surveys. The siting policy reduces contamination from locally resuspended surface-dust. The second part of the research has involved detailed surveys of heavy metal deposition in Walsall, West Midlands, using the new high-density measurement method. The main survey, conducted over a six-week period in November - December 1982, provided 30-day samples of deposition at 250 different sites. The results have been used to examine the magnitude and spatial variability of deposition rates in the case-study area, and to evaluate the performance of the measurement method. The third part of the research has been to conduct a 'source-identification' exercise. The methods used have been Receptor Models - Factor Analysis and Cluster Analysis - and a predictive source-based deposition model. The results indicate that there are six main source processes contributing to deposition of metals in the Walsall area: coal combustion, vehicle emissions, ironfounding, copper refining and two general industrial/urban processes. |A source-based deposition model has been calibrated using facctorscores for one source factor as the dependent variable, rather than metal deposition rates, thus avoiding problems traditionally encountered in calibrating models in complex multi-source areas. Empirical evidence supports the hypothesised associatlon of this factor with emissions of metals from the ironfoundry industry.

Energy conservation measures on an industrial site

World and UK energy resources and use are reviewed and the role of energy conservation in energy policy identified. In considering various energy conservation measures, a distinction is made between energy intensive and non-intensive industries and also between direct and indirect uses of energy. Particular attention is given to the non-intensive user of energy. Energy use on one such industrial site has been studied to determine the most effective energy saving measures in the short term. Here it is estimated that over 65% of energy is consumed for indirect purposes, mainly for heating and lighting buildings. Emphasis is placed on energy auditing techniques and those energy saving measures requiring greater technical, economic and organisational resources to secure their implementation. Energy auditing techniques include the use of aerial thermography and snow formation surveys to detect heat losses. Qualitative and quantitative interpretations are carried out, but restricted mainly to evaluating building roof heat losses. From the energy auditing exercise, it is confirmed that the intermittent heating of buildings is the largest and most cost effective fuel saving measure. This was implemented on the site and a heat monitoring programme established to verify results. Industrial combined heat and power generation is investigated. A proposal for the site demonstrates that there are several obstacles to its successful implementation. By adopting an alternative financial rationale, a way of overcoming these obstacles is suggested. A useful by-product of the study is the classification of industrial sites according to the nature of industrial energy demand patterns. Finally, energy saving measures implemented on the site are quantlfied using comparative verification methods. Overall fuel savings of 13% are indicated. Cumulative savings in heating fuel amount to 26% over four years although heated area increased by approximately 25%.

The management of diversification in a large industrial company

This work is the result of an action-research-type study of the diversification effort of part of a major U.K. industrial company. Work in contingency theory concerning the impact of environmental factors on organizational design, and the systemic model of viable systems put forward by Stafford Beer form the theoretical basis of the vvork. The two streams of thought are compared and found to offer similar conclusions about the design of effective organizations. These findings are taken as the framework for an analysis both of organization structures for promoting innovation described in the literature, and of those employed by the company for this purpose in recent years. Much attention is given to the use of venture groups, and conclusions are drawn on particular factors which may influence their success or failure. Both theoretical considerations, and the examination of the company' s recent experience suggested that the formation of the policy of diversification, as well as the method of implementation of the police, might affect its outcorre. Attention is therefore focused on the policy-making and planning process, and in particular on possible problems that this process could generate in a multi-division company. The view finally taken of diversification effort is that it should be regarded as a learning system. This view helps to expose some ambiguities in the concepts of success and failure in this area, and demonstrates considerable weaknesses in traditional project evaluation procedures.

Industrial new product planning:a study of the sources of new product ideas and the development of new product proposals in the UK computer industry

This thesis presents a study of the sources of new product ideas and the development of new product proposals in an organisation in the UK Computer Industry. The thesis extends the work of von Hippel by showing how the phenomenon which he describes as "the Customer Active Paradigm for new product idea generation" can be observed to operate in this Industry. Furthermore, this thesis contrasts his Customer Active Paradigm with the more usually encountered Manufacturer Active Paradigm. In a second area, the thesis draws a number of conclusions relating to methods of market research, confirming existing observations and demonstrating the suitability of flexible interview strategies in certain circumstances. The thesis goes on to demonstrate the importance of free information flow within the organisation, making it more likely that sought and unsought opportunities can be exploited. It is shown that formal information flows and documents are a necessary but not sufficient means of influencing the formation of the organisation's dominant ideas on new product areas. The findings also link the work of Tushman and Katz on the role of "Gatekeepers" with the work of von Hippel by showing that the role of gatekeeper is particularly appropriate and useful to an organisation changing from Customer Active to Manufacturer Active methods of idea generation. Finally, the thesis provides conclusions relating to the exploitation of specific new product opportunities facing the sponsoring organisation.