Cross-layer design for multiuser MIMO MRC systems with feedback constraints

Cross-layer techniques represent efficient means to enhance throughput and increase the transmission reliability of wireless communication systems. In this paper, a cross-layer design of aggressive adaptive modulation and coding (A-AMC), truncated automatic repeat request (T-ARQ), and user scheduling is proposed for multiuser multiple-input-multiple-output (MIMO) maximal ratio combining (MRC) systems, where the impacts of feedback delay (FD) and limited feedback (LF) on channel state information (CSI) are also considered. The A-AMC and T-ARQ mechanism selects the appropriate modulation and coding schemes (MCSs) to achieve higher spectral efficiency while satisfying the service requirement on the packet loss rate (PLR), profiting from the feasibility of using different MCSs to retransmit a packet, which is destined to a scheduled user selected to exploit multiuser diversity and enhance the system's performance in terms of both transmission efficiency and fairness. The system's performance is evaluated in terms of the average PLR, average spectral efficiency (ASE), outage probability, and average packet delay, which are derived in closed form, considering transmissions over Rayleigh-fading channels. Numerical results and comparisons are provided and show that A-AMC combined with T-ARQ yields higher spectral efficiency than the conventional scheme based on adaptive modulation and coding (AMC), while keeping the achieved PLR closer to the system's requirement and reducing delay. Furthermore, the effects of the number of ARQ retransmissions, numbers of transmit and receive antennas, normalized FD, and cardinality of the beamforming weight vector codebook are studied and discussed.

Cross-layer design for MIMO systems over spatially correlated and keyhole Nakagami-m fading channels

Cross-layer design is a generic designation for a set of efficient adaptive transmission schemes, across multiple layers of the protocol stack, that are aimed at enhancing the spectral efficiency and increasing the transmission reliability of wireless communication systems. In this paper, one such cross-layer design scheme that combines physical layer adaptive modulation and coding (AMC) with link layer truncated automatic repeat request (T-ARQ) is proposed for multiple-input multiple-output (MIMO) systems employing orthogonal space--time block coding (OSTBC). The performance of the proposed cross-layer design is evaluated in terms of achievable average spectral efficiency (ASE), average packet loss rate (PLR) and outage probability, for which analytical expressions are derived, considering transmission over two types of MIMO fading channels, namely, spatially correlated Nakagami-m fading channels and keyhole Nakagami-m fading channels. Furthermore, the effects of the maximum number of ARQ retransmissions, numbers of transmit and receive antennas, Nakagami fading parameter and spatial correlation parameters, are studied and discussed based on numerical results and comparisons. Copyright © 2009 John Wiley & Sons, Ltd.

The effect of a new drag-law parameterization on ice shelf water plume dynamics

A drag law accounting for Ekman rotation adjacent to a flat, horizontal bou ndary is proposed for use in a plume model that is written in terms of the depth-mean velocity. The drag l aw contains a variable turning angle between the mean velocity and the drag imposed by the turbulent bound ary layer. The effect of the variable turning angle in the drag law is studied for a plume of ice shelf wat er (ISW) ascending and turning beneath an Antarctic ice shelf with draft decreasing away from the groundi ng line. As the ISW plume ascends the sloping ice shelf–ocean boundary, it can melt the ice shelf, wh ich alters the buoyancy forcing driving the plume motion. Under these conditions, the typical turning ang le is of order 10° over most of the plume area for a range of drag coefficients (the minus sign arises for th e Southern Hemisphere). The rotation of the drag with respect to the mean velocity is found to be signifi cant if the drag coefficient exceeds 0.003; in this case the plume body propagates farther along and across the b ase of the ice shelf than a plume with the standard quadratic drag law with no turning angle.

Children's misconceptions and the teaching of early years science: a case study

The aim of this paper is to examine how teachers’ awareness of children’s misconceptions can affect children’s acquisition of scientific concepts. In other words, this paper is aimed at examining whether teaching is altered when teachers are aware of pupils’ misconceptions of a specific science concept. This paper details a case study focused on two kindergarten classes of five year-old children and their teachers and took place in Cyprus. Two lessons were observed and three children from each class were interviewed. Through the analysis of children’s responses it was possible to identify specific misconceptions related to the concept of rain. The results indicate that it is very important for teachers to be aware of what misconceptions children have, because this can help them plan lessons for children to overcome their misconceptions. It seems that it is more likely for children to overcome their misconceptions when teachers take these misconceptions into account as they plan and teach science lessons.

Ação social das empresas privadas: uma metodologia para avaliação de resultados

In the recent years Corporate Social Action (CSA) has become more and more relevant to corporate context. The aim is to benefit both poor communities and the donnor companies, as it meets the needs of their salient stakeholders. Nevertheless, there still exists considerable scepticism concerning CSA. In order to become a solid management practice, it is critcal to evidence the attained results. Up to now, the focus has been on process evaluation, that is, on the policies companies are adopting. Literature revision has shown a great need of studies related to results identification in this field. Therefore, using stakeholders` framework (according to Wood, 1991; Donaldson and Preston, 1995; Hopkins, 1997; Hamil, 1999), we have developped a methodology to evaluate CSA results, based on public and private effectiveness criteria. As we applied it to assess Xerox social action in Brazil we were able to identify the attainment degree of expected results related to the benefitted community (Mangueira) and also to some Xerox salient stakeholders (employees and clients).

Fatores organizacionais facilitadores e inibidores da pesquisa em Universidade : um estudo de caso

Através de pesquisa de campo, que teve como sujeitos professores da UFF, buscou-se classificar os fatores organizacionais básicos que facilitam e/ou inibem a pesquisa na Universidade, tanto gerados no âmbito interno como externo da mesma. Para levantamento de dados foram utilizados, como instrumentos, uma entrevista semi-estruturada, feita com docentes-pesquisadores e administradores de pesquisa, e um questionário fechado aplicado tanto aos docentes-pesquisadores e administradores de pesquisa, e um questináriofechado aplicado tanto aos docentes-pesquisadores e administradores de pesquisa, quanto aos demais docentes. Da análise dos resultados conclui-se como forças positivas para os desafios da pesquisa: a ampliação do percentual de professores em DE e a existência de programas de bolsa de indiciação científica. Como fatores negativos: a falta de recursos internos e a pouca valorização da pesquisa como fonte geradora de novos conhecimentos e práticas, levantados pelos professores que participaram da amostra.

Toward a theory of international currency : a step further

We generalize the two-country, two-currency model of Matsuyama, Kiyotaki and Matsui to resolve two "shortcomings" in their approach. First, we endogenize prices and excb.ange rates. Second, we introduce monetary policy. We then use the model to address the following new questions: How does the fact that a currency circulates intemationally affect its purcb.asing power? Where does an intemational currency purcb.ase more? What are the effects on seignorage and welfare when a currency becomes intemational? How is policy affected by concems of currency substitution? How are national monetary policies connected, and what is the scope for international cooperation?

Mineralogy of the clay fraction of Alfisols in two slope curvatures: III - spatial variability

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Mineralogy of the clay fraction of alfisols in two slope curvatures: IV - spatial correlation with physical properties

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo do desempenho de catalisadores tipo Ni/CexM1-xO2 (M = Zr ou Mn) na reação de oxidação parcial do metano

One of the main applications of methane is in the production of syngas, a mixture of hydrogen and carbon monoxide. Procedures used in this process are steam reforming, CO2 reforming, partial oxidation and autothermal reforming. The present study evaluated and compared the behavior of nickel catalysts supported on mixed oxides of cerium and manganese in the partial oxidation of methane with that of nickel catalysts supported on mixed oxides of cerium and zirconium. Mixed oxides of cerium and zirconium or cerium and manganese were synthesized using two different preparation methods, the polymeric precursor based on Pechini method and combustion reaction using a microwave. This was followed by impregnation with nickel content of 15 %. Samples were calcined at 300, 800 and 900 °C and characterized by specific surface area (SSA), X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), temperature programmed reduction (TPR) and the reaction of partial oxidation of methane. The specific areas of samples decrease with the rise in calcination temperature and after nickel impregnation. Metal-cerium solid solution was formed and the presence of other manganese species outside the solid solution structure was confirmed in the compound with the highest amounts of manganese oxides showed. With regard to scanning electron microscopy, supports based on cerium and zirconium prepared by Pechini method exhibited agglomerated particles without uniform geometry or visible pores on the surface. However, compounds containing manganese presented empty spaces in its structure. Through synthesis by combustion reaction, morphology acquired independently of the proposed composition demonstrated greater porosity in relation to Pechini synthesis. Although catalysts were prepared using different synthesis methods, the insertion of nickel showed very similar reduction profiles (TPR). In relation to nickel catalysts supported on mixed oxide of cerium and zirconium, there is an initial reduction of NiO species that present certain interaction with the support. This is followed by the reduction of Ce4+ in Ce3+ surface, with subsequent bulk reduction. For catalysts containing manganese, a reduction of nickel oxide species occurs, followed by two stages of reduction for species Mn2O3 in Mn3O4 and Mn3O4 in MnO, with subsequent reduction of bulk. With respect to partial oxidation reactions, the nickel catalyst supported on mixed oxide of cerium and zirconium, prepared using the Pechini method, exhibited CH4 conversion of approximately 80 %, with conversion of 81 % when prepared by combustion. This behavior continued for 10 hours of reaction. Manganese content was also found to directly influence catalytic activity of materials; the greater the manganese oxide content, the faster deactivation and destabilization occurred in the catalyst. In both synthesis methods, the nickel catalyst supported on mixed oxide of cerium and zirconium maintained an H2/CO ratio very close to 2 during the 10 hours of partial oxidation reaction. Samples containing manganese displayed smaller H2/CO ratios and lower performance in partial oxidation.

Comparison of impression techniques and materials for implant-supported prosthesis

Purpose: To investigate, in vitro, the dimensional accuracy of two impression techniques (squared impression copings and squared impression copings sandblasted and coated with impression adhesive) made of vinyl polysiloxane and polyether impression materials. Materials and Methods: A master cast (control group) with four parallel implant abutment analogs, a passive framework, and a custom aluminum tray was fabricated. Four groups (n = 5 each group) were tested: squared Impregum (SI), squared Express (SE), sandblasted adhesive squared Impregum (ASI), and sandblasted adhesive squared Express (ASE). The measurement method employed was just one titanium screw tightened to the framework. A stereomicroscope was used to evaluate the fit of the framework by measuring the size of the gap between the abutment and the framework. The results were analyzed statistically. Results: The mean values for the abutment/framework interface gaps were: master cast, 31.63 mu m (SD 2.16); SI, 38.03 mu m (SD 9.29); ASI, 46.80 mu m (SD 8.47); SE, 151.21 mu m (SD 22.79); and ASE, 136.59 mu m (SD 29.80). No significant difference was detected between the SI or ASI techniques and the master cast. No significant difference was detected between the SE and ASE techniques. Conclusion: Within the limitations of this study, it can be concluded that Impregum Soft medium consistency was the best impression material and the impression technique did not influence the accuracy of the stone casts. INT J ORAL MAXILLOFAC IMPLANTS 2010;25:771-776

Avaliação laboratorial do uso de solução salina hipertônica e isotônica e de furosemida no tratamento da intoxicação por amônia em bovinos

Para testar a eficiência de vários tratamentos de intoxicação por amônia em bovinos, foram utilizados 25 garrotes que receberam cloreto de amônio por infusão intravenosa (iv) até o surgimento de quadro convulsivo. em seguida, os animais foram alocados em um dos cinco grupos experimentais e tratados da seguinte forma: 1) controle: infusão (iv) de 300mL de solução salina isotônica (SSI), no decorrer de 4h; 2) infusão (iv) de 30mL kg-1 PV de SSI no decorrer de 4h e administração de 4L de água intraruminal por meio de sonda esofágica (ASE); 3) mesmo tratamento do grupo 2 e dose única (iv) de furosemida (2mg kg-1 PV) (F); 4) injeção (iv) de 5mL kg-1 PV de solução salina hipertônica (SSH) 7,2% nos primeiros 30min, seguida de 20mL kg-1 PV de SSI e 4L de ASE; 5) mesmo tratamento do grupo 4 e dose única de F. No decorrer de 4h após a convulsão, foram determinados os teores plasmáticos de amônia e glicose, ureia, creatinina, potássio e sódio séricos, volume e gravidade específica da urina, e excreção urinária de amônio e ureia. No momento da convulsão, os teores de amônia plasmáticos foram muito altos e idênticos em todos os tratamentos, mas no 120°min, nos grupos tratados com associação de SSH+SSI+ASE (grupos 4 e 5), houve diminuição desse metabólito. O uso de furosemida (grupos 3 e 5) não aumentou a excreção total de urina. A terapia com associação de SSH+SSI+ASE aumentou ainda o volume urinário e a excreção percentual urinária de ureia e amônia durante o período crítico da 1ª hora de tratamento, mas o uso de SSI+ASE (grupos 2 e 3) teve resultados intermediários. A eficiência do tratamento com SSH+SSI+ASE ou SSI+ASE foi superior ao grupo controle. Embora com efeito menor que o observado com SSH+SSI+ASE, a SSI+ASE promoveu melhora no quadro clínico geral e, ao término do experimento, promoveu também uma adequada desintoxicação da amônia.