Fine structure in the time of flight distribution of C2 in laser produced plasma from graphite

Time resolved optical emission spectroscopy is employed to study the expansion dynamics of C2 species in a graphite plasma produced during the Nd : YAG ablation. At low laser fluences a single peak distribution with low kinetic energy is observed. At higher fluences a twin peak distribution is found. It has been noted that these double peak time of flight distribution splits into a triple peak structure at distances >_ 17mm from the target surface. The reason for the occurrence of multiple peak is due to different formation mechanisms of C2 species

Erasing the glassy state in magnetic fine particles

BaFe10.4Co0.8Ti0.8O19 magnetic fine particles exhibit most of the features attributed to glassy behavior, e.g., irreversibility in the hysteresis loops and in the zero-field-cooling and field-cooling curves extends up to very high fields, and aging and magnetic training phenomena occur. However, the multivalley energy structure of the glassy state can be strongly modified by a field-cooling process at a moderate field. Slow relaxation experiments demonstrate that the intrinsic energy barriers of the individual particles dominate the behavior of the system at high cooling fields, while the energy states corresponding to collective glassy behavior play the dominant role at low cooling fields.

Reply to "Comment on 'Erasing glassy state in magnetic fine particles'"

The Comment affirms that no phase transition occurs in spin-glass systems with an applied magnetic field. However, only according to the droplet model is this result expected. Other models do not predict this result and, consequently, it is under current discussion. In addition, we show how the experimental results obtained in our system correspond to a cluster glass rather than to a true spin glass.

Structural, magnetic and electrical properties of the sol-gel prepared Li0.5Fe2.5O4 fine particles

Fine particles of lithium ferrite were synthesized by the sol-gel method. By subsequent heat treatment at different temperatures, lithium ferrites of different grain sizes were prepared. A structural characterization of all the samples was conducted by the x-ray diffraction technique. A grain size of around 12 nm was observed for Li0.5Fe2.5O4 obtained through the sol-gel method. Magnetic properties of lithium ferrite nanoparticles with grain size ranging from 12 to 32 nm were studied. Magnetization measurements showed that Li0.5Fe2.5O4 fine particles exhibit a deviation from the predicted magnetic behaviour. The as-prepared sample of lithium ferrite showed a maximum saturation magnetization of 75 emu g−1. Variation of coercivity is attributed to the transition from multi-domain to single domain nature. Dielectric permittivity and ac conductivity of all the samples were evaluated as a function of frequency, temperature and grain size. Variation of permittivity and ac conductivity with frequency reveals that the dispersion is due to the Maxwell–Wagner type interfacial polarization

Classification of recycled sands and their applications as fine aggregates for concrete and bituminous mixtures

As a result of the drive towards waste-poor world and reserving the non-renewable materials, recycling the construction and demolition materials become very essential. Now reuse of the recycled concrete aggregate more than 4 mm in producing new concrete is allowed but with natural sand a fine aggregate while. While the sand portion that represent about 30\% to 60\% of the crushed demolition materials is disposed off. To perform this research, recycled concrete sand was produced in the laboratory while nine recycled sands produced from construction and demolitions materials and two sands from natural crushed limestone were delivered from three plants. Ten concrete mix designs representing the concrete exposition classes XC1, XC2, XF3 and XF4 according to European standard EN 206 were produced with partial and full replacement of natural sand by the different recycled sands. Bituminous mixtures achieving the requirements of base courses according to Germany standards and both base and binder courses according to Egyptian standards were produced with the recycled sands as a substitution to the natural sands. The mechanical properties and durability of concrete produced with the different recycled sands were investigated and analyzed. Also the volumetric analysis and Marshall test were performed hot bituminous mixtures produced with the recycled sands. According to the effect of replacement the natural sand by the different recycled sands on the concrete compressive strength and durability, the recycled sands were classified into three groups. The maximum allowable recycled sand that can be used in the different concrete exposition class was determined for each group. For the asphalt concrete mixes all the investigated recycled sands can be used in mixes for base and binder courses up to 21\% of the total aggregate mass.

Contribution of the exact Breit operator plus the electron state-dependent screening to the multiplet and fine structure of muon-electron atoms

We investigate for very general cases the multiplet and fine structure splitting of muonelectron atoms arising from the coupling of the electron and muon angular momenta, including the effect of the Breit operator plus the electron state-dependent screening. Although many conditions have to be fulfilled simultaneously to observe these effeets, it should be possible to measure them in the 6h- 5g muonic transition in the Sn region.

Concurrent Aggregates (CA): An Object-Oriented Language for Fine-Grained Message-Passing Machines

Fine-grained parallel machines have the potential for very high speed computation. To program massively-concurrent MIMD machines, programmers need tools for managing complexity. These tools should not restrict program concurrency. Concurrent Aggregates (CA) provides multiple-access data abstraction tools, Aggregates, which can be used to implement abstractions with virtually unlimited potential for concurrency. Such tools allow programmers to modularize programs without reducing concurrency. I describe the design, motivation, implementation and evaluation of Concurrent Aggregates. CA has been used to construct a number of application programs. Multi-access data abstractions are found to be useful in constructing highly concurrent programs.

Investigation of aspect ratio of hole drilling from micro to nanoscale via focused ion beam fine milling

Holes with different sizes from microscale to nanoscale were directly fabricated by focused ion beam (FIB) milling in this paper. Maximum aspect ratio of the fabricated holes can be 5:1 for the hole with large size with pure FIB milling, 10:1 for gas assistant etching, and 1:1 for the hole with size below 100 nm. A phenomenon of volume swell at the boundary of the hole was observed. The reason maybe due to the dose dependence of the effective sputter yield in low intensity Gaussian beam tail regions and redeposition. Different materials were used to investigate variation of the aspect ratio. The results show that for some special material, such as Ni-Be, the corresponding aspect ratio can reach 13.8:1 with Cl₂ assistant etching, but only 0.09:1 for Si(100) with single scan of the FIB.

ALEX SCHADY IMAGES FOR FINE ART CATALOGUE

student images for fine art catalogue

Credit Default Swaps (CDS) y Collateral Debt Obligation (CDO) derivados financieros responsables de la crisis sub-prime de 2008 en Estados Unidos y una guía para el desarrollo del mercado de derivados exóticos en Colombia

La crisis financiera hipotecaria de 2008 en la que se declaró en quiebra el banco de inversión Lehman Brothers, se desarrolló en un ambiente que contemplaba apalancamientos financieros excesivos y el uso de derivados financieros de crédito innovadores. Razón por la cual, a partir del estudio de caso de quiebra de este banco de inversión y el análisis de las causas y consecuencias del ambiente desregulatorio que surgió en Estados Unidos desde la década de los 30 hasta el 2000, se orienta la investigación a indagar sobre lo que sucede en términos regulatorios y empresariales en el mercado de valores colombiano y así lograr definir objetivos que permitan el crecimiento del mercado de derivados exóticos en Colombia bajo un marco de responsabilidad financiera y ética empresarial.

Trans-Ancestral Studies Fine Map the SLE-Susceptibility Locus TNFSF4

We previously established an 80 kb haplotype upstream of TNFSF4 as a susceptibility locus in the autoimmune disease SLE. SLE-associated alleles at this locus are associated with inflammatory disorders, including atherosclerosis and ischaemic stroke. In Europeans, the TNFSF4 causal variants have remained elusive due to strong linkage disequilibrium exhibited by alleles spanning the region. Using a trans-ancestral approach to fine-map the locus, utilising 17,900 SLE and control subjects including Amerindian/Hispanics (1348 cases, 717 controls), African-Americans (AA) (1529, 2048) and better powered cohorts of Europeans and East Asians, we find strong association of risk alleles in all ethnicities; the AA association replicates in African-American Gullah (152,122). The best evidence of association comes from two adjacent markers: rs2205960-T (P = 1.71×10-34, OR = 1.43[1.26-1.60]) and rs1234317-T (P = 1.16×10-28, OR = 1.38[1.24-1.54]). Inference of fine-scale recombination rates for all populations tested finds the 80 kb risk and non-risk haplotypes in all except African-Americans. In this population the decay of recombination equates to an 11 kb risk haplotype, anchored in the 5′ region proximal to TNFSF4 and tagged by rs2205960-T after 1000 Genomes phase 1 (v3) imputation. Conditional regression analyses delineate the 5′ risk signal to rs2205960-T and the independent non-risk signal to rs1234314-C. Our case-only and SLE-control cohorts demonstrate robust association of rs2205960-T with autoantibody production. The rs2205960-T is predicted to form part of a decameric motif which binds NF-κBp65 with increased affinity compared to rs2205960-G. ChIP-seq data also indicate NF-κB interaction with the DNA sequence at this position in LCL cells. Our research suggests association of rs2205960-T with SLE across multiple groups and an independent non-risk signal at rs1234314-C. rs2205960-T is associated with autoantibody production and lymphopenia. Our data confirm a global signal at TNFSF4 and a role for the expressed product at multiple stages of lymphocyte dysregulation during SLE pathogenesis. We confirm the validity of trans-ancestral mapping in a complex trait. © 2013 Manku et al.

Oportunidades de internacionalización que tiene un hato ganadero productor de carne en el mercado canadiense

El presente trabajo investigativo busca brindar al lector las herramientas necesarias para poder exportar carne fresca al mercado Canadiense mediante la implementación de un plan detallado, que involucrando el proceso de producción de animales óptimos para la producción de carne, pueda cumplir con el objetivo de expandir la disponibilidad de cortes finos de carne en el mercado extranjero. Por una parte, se hace una explicación detallada del producto, del proceso de producción y del sector cárnico en Colombia. Se hace una exposición de las condiciones en las cuales debe crecer un animal para llegar a producir carne de la mejor calidad. Así mismo, se informa sobre la situación actual del sector cárnico y las debilidades y fortalezas que tiene para poder expandirse al mercado internacional. Posteriormente se hace una investigación de marcados en el país objeto de estudio, para mostrar las oportunidades y posibles obstáculos que se pueden encontrar en Canadá. En segundo lugar, se analiza la competencia a la que se enfrentaría el producto colombiano, que comprende el análisis de las cifras de exportación de los socios comerciales de Canadá para la venta del producto objeto de análisis, para finalmente diseñar un documento dirigido a emprendedores, empresarios y/o ganaderos que busquen la manera de expandir su negocio a Canadá, con todos los pasos necesarios para poder realizar el proceso de exportación de la manera más productiva y eficaz.

La diplomacia cultural como herramienta para el mejoramiento de la relación económica de Colombia con Corea del Sur y Australia

Esta investigación se preocupa por dilucidar la función de la diplomacia cultural como herramienta para mejorar la relación económica de Colombia con Corea del Sur y Australia. Así, se analiza a la diplomacia cultural y lo que hace Colombia en esta materia en ambos países; así como el estado de la relación económica de Colombia en un periodo de ocho años con dichos países, y cómo las acciones culturales colombianas podrían llegar a mejorar dicha relación económica. De esta manera además del desarrollo conceptual de diplomacia cultural y los indicadores económicos, a saber; exportaciones; Inversión Extranjera Directa y turismo; se corrió un modelo de regresión lineal para saber si efectivamente hay relación entre ambas variables y una contribución final que consiste en una propuesta de generación de indicadores de gestión a utilizarse al momento de implementar la diplomacia cultural como herramienta en política exterior.

Difference between default telecoil and programmed microphone frequency response in behind-the-ear hearing aids

The notion that the default telecoil (t-coil) frequency response should match the programmed microphone frequency response to provide optimal telephone understanding for hearing aid patients has received little attention. This study addresses differences in the average frequency response of the two transducers in behind-the-ear (BTE) hearing aids.