Modelling the economic benefits of gold standard care for chronic wounds in a community setting

Chronic leg ulcers are costly to manage for health service providers. Although evidence-based care leads to improved healing rates and reduced costs, a significant evidence-practice gap is known to exist. Lack of access to specialist skills in wound care is one reason suggested for this gap. The aim of this study was to model the change to total costs and health outcomes under two versions of health services for patients with leg ulcers: routine health services for community-living patients; and care provided by specialist wound clinics. Mean weekly treatment and health services costs were estimated from participants’ data (n=70) for the twelve months prior to their entry to a study specialist wound clinic, and prospectively for 24 weeks after entry. For the retrospective phase mean weekly costs of care were $AU130.30 (SD $12.64) and these fell to $AU53.32 (SD $6.47) for the prospective phase. Analysis at a population level suggests if 10,000 individuals receive 12 weeks of specialist evidence-based care, the cost savings are likely to be AU$9,238,800. Significant savings could be made by the adoption of evidence-based care such as that provided by the community and outpatient specialist wound clinics in this study.

Polycaprolactone scaffold and reduced rhBMP-7 dose for the regeneration of critical-sized defects in sheep tibiae

The transplantation of autologous bone graft as a treatment for large bone defects has the limitation of harvesting co-morbidity and limited availability. This drives the orthopaedic research community to develop bone graft substitutes. Routinely, supra-physiological doses of bone morphogenetic proteins (BMPs) are applied perpetuating concerns over undesired side effects and cost of BMPs. We therefore aimed to design a composite scaffold that allows maintenance of protein bioactivity and enhances growth factor retention at the implantation site. Critical-sized defects in sheep tibiae were treated with the autograft and with two dosages of rhBMP-7, 3.5 mg and 1.75 mg, embedded in a slowly degradable medical grade poly(ε-caprolactone) (PCL) scaffold with β-tricalcium phosphate microparticles (mPCL-TCP). Specimens were characterised by biomechanical testing, microcomputed tomography and histology. Bridging was observed within 3 months for the autograft and both rhBMP-7 treatments. No significant difference was observed between the low and high rhBMP-7 dosages or between any of the rhBMP-7 groups and autograft implantation. Scaffolds alone did not induce comparable levels of bone formation compared to the autograft and rhBMP-7 groups. In summary, the mPCL-TCP scaffold with the lower rhBMP-7 dose led to equivalent results to autograft transplantation or the high BMP dosage. Our data suggest a promising clinical future for BMP application in scaffold-based bone tissue engineering, lowering and optimising the amount of required BMP.

Incorporating adverse event relatedness into dose-finding clinical trial designs

Dose-finding designs estimate the dose level of a drug based on observed adverse events. Relatedness of the adverse event to the drug has been generally ignored in all proposed design methodologies. These designs assume that the adverse events observed during a trial are definitely related to the drug, which can lead to flawed dose-level estimation. We incorporate adverse event relatedness into the so-called continual reassessment method. Adverse events that have ‘doubtful’ or ‘possible’ relationships to the drug are modelled using a two-parameter logistic model with an additive probability mass. Adverse events ‘probably’ or ‘definitely’ related to the drug are modelled using a cumulative logistic model. To search for the maximum tolerated dose, we use the maximum estimated toxicity probability of these two adverse event relatedness categories. We conduct a simulation study that illustrates the characteristics of the design under various scenarios. This article demonstrates that adverse event relatedness is important for improved dose estimation. It opens up further research pathways into continual reassessment design methodologies.

Effects of small field output factors on IMRT optimisation and dose calculation

Introduction Given the known challenges of obtaining accurate measurements of small radiation fields, and the increasing use of small field segments in IMRT beams, this study examined the possible effects of referencing inaccurate field output factors in the planning of IMRT treatments. Methods This study used the Brainlab iPlan treatment planning system to devise IMRT treatment plans for delivery using the Brainlab m3 microMLC (Brainlab, Feldkirchen, Germany). Four pairs of sample IMRT treatments were planned using volumes, beams and prescriptions that were based on a set of test plans described in AAPM TG 119’s recommendations for the commissioning of IMRT treatment planning systems [1]: • C1, a set of three 4 cm volumes with different prescription doses, was modified to reduce the size of the PTV to 2 cm across and to include an OAR dose constraint for one of the other volumes. • C2, a prostate treatment, was planned as described by the TG 119 report [1]. • C3, a head-and-neck treatment with a PTV larger than 10 cm across, was excluded from the study. • C4, an 8 cm long C-shaped PTV surrounding a cylindrical OAR, was planned as described in the TG 119 report [1] and then replanned with the length of the PTV reduced to 4 cm. Both plans in each pair used the same beam angles, collimator angles, dose reference points, prescriptions and constraints. However, one of each pair of plans had its beam modulation optimisation and dose calculation completed with reference to existing iPlan beam data and the other had its beam modulation optimisation and dose calculation completed with reference to revised beam data. The beam data revisions consisted of increasing the field output factor for a 0.6 9 0.6 cm2 field by 17 % and increasing the field output factor for a 1.2 9 1.2 cm2 field by 3 %. Results The use of different beam data resulted in different optimisation results with different microMLC apertures and segment weightings between the two plans for each treatment, which led to large differences (up to 30 % with an average of 5 %) between reference point doses in each pair of plans. These point dose differences are more indicative of the modulation of the plans than of any clinically relevant changes to the overall PTV or OAR doses. By contrast, the maximum, minimum and mean doses to the PTVs and OARs were smaller (less than 1 %, for all beams in three out of four pairs of treatment plans) but are more clinically important. Of the four test cases, only the shortened (4 cm) version of TG 119’s C4 plan showed substantial differences between the overall doses calculated in the volumes of interest using the different sets of beam data and thereby suggested that treatment doses could be affected by changes to small field output factors. An analysis of the complexity of this pair of plans, using Crowe et al.’s TADA code [2], indicated that iPlan’s optimiser had produced IMRT segments comprised of larger numbers of small microMLC leaf separations than in the other three test cases. Conclusion: The use of altered small field output factors can result in substantially altered doses when large numbers of small leaf apertures are used to modulate the beams, even when treating relatively large volumes.

Development of a dose assessment tool for the auditing of radiotherapy treatment dosimetric quality

The reporting and auditing of patient dose is an important component of radiotherapy quality assurance. The manual extraction of dose-volume metrics is time consuming and undesirable when auditing the dosimetric quality of a large cohort of patient plans. A dose assessment application was written to overcome this, allowing the calculation of various dose-volume metrics for large numbers of plans exported from treatment planning systems. This application expanded on the DICOM-handling functionality of the MCDTK software suite. The software extracts dose values in the volume of interest by using a ray casting point-in-polygon algorithm, where the polygons have been defined by the contours in the RTSTRUCT file...

Origins of the observed asymmetry in out-of-field dose from a linac fitted with an external micro-MLC

Objective Recently, Taylor et al. reported that use of the BrainLAB m3 microMLC, for stereotactic radiosurgery, results in a decreased out-of-field dose in the direction of leaf-motion compared to the outof- field dose measured in the direction orthogonal to leaf-motion [1]. It was recommended that, where possible, patients should be treated with their superior–inferior axes aligned with the microMLCs leafmotion direction, to minimise out-of-field doses [1]. This study aimed, therefore, to examine the causes of this asymmetry in outof- field dose and, in particular, to establish that a similar recommendation need not be made for radiotherapy treatments delivered by linear accelerators without external micro-collimation systems. Methods Monte Carlo simulations were used to study out-of-field dose from different linear accelerators (the Varian Clinacs 21iX and 600C and the Elekta Precise) with and without internal MLCs and external microMLCs [2]. Results Simulation results for the Varian Clinac 600C linear accelerator with BrainLAB m3 microMLC confirm Taylor et als [1] published experimental data. The out-of-field dose in the leaf motion direction is deposited by lower energy (more obliquely scattered) photons than the out-of-field dose in the orthogonal direction. Linear accelerators without microMLCs produce no asymmetry in out-offield dose. Conclusions The asymmetry in out-of-field dose previously measured by Taylor et al. [1] results from the shielding characteristics of the BrainLAB m3 microMLC device and is not produced by the linear accelerator to which it is attached.

Three-dimensional dose verification for clinical treatments of small intracranial tumours

Cancers of the brain and central nervous system account for 1.6% of new cancers and 1.8% of cancer deaths globally. The highest rates of all developed nations are observed in Australia and New Zealand. There are known complexities associated with dose measurement of very small radiation fields. Here, 3D dosimetric verification of treatments for small intracranial tumours using gel dosimetry was investigated.

India's vocational education capacity to support the anticipated economic growth

The buoyancy that the Indian economy experienced between 2000 and 2010, in spite of the global downturn of 2008, is no longer a reality. Growth projections for 2012-13 have been reassessed to 6.5 per cent. This is still higher than most other developed economies of the world (see Figure 1.1), however the growth rate is slowing. The World Bank in its recent forecasts1 expects India’s growth rates not to extend beyond 7.2 % and 7.4 % in the years 2013-14 and 2014-15, respectively. Similarly, the Planning Commission has scaled down the growth target for the 12th Five Year Plan (2012-17) from 9% to 8%. Different reports note different rates, but the consistent message is that the projection of India’s economy is on a downward trend...

Barriers to sustainable economic development : the Dallas–Fort Worth experience

This article examines the scope of existing economic development activity and the motivations and perceptions of practitioners to shed light on the barriers to sustainable practice. In contrast to related fields like urban planning, the economic development literature has minimally examined how practitioners think about sustainable development and the extent to which sustainable development principles are adopted in practice. This omission is significant because economic development policies can have a notable impact on the sustainable development goals of environmental protection and social equity alongside economic growth. To capture the extent to which economic developers engage in sustainable development and the barriers that practitioners face, we study fifteen cities in the Dallas–Fort Worth region. We find that six key barriers – a conventional economic development mindset, incentive-based practice, a lack of resources, ad hoc planning, inter-regional competition, and a lack of coordinated regional planning – impede sustainable economic development in the region.

Art spaces in community and economic development : connections to neighborhoods, artists, and the cultural economy

There is growing interest in the arts in community and economic development, yet little research examines the dynamics of community-based arts institutions to inform urban planning and policy. Drawing on interviews with participants and organizers of small and midsized art spaces, the study explores the factors that influence their involvement in neighborhood revitalization and outreach, support for artistic communities, and efforts to build bridges to commercial cultural sectors. Art spaces function as a conduit for building social networks that contribute to both community revitalization and artistic development. But issues pertaining to the location, organization, and management of art spaces may limit their community and economic development potential. The article concludes with proposals to craft stronger arts-based community and economic development programs.

Economic development and construction productivity in Malaysia

The productivity of the construction industry has a significant effect on national economic growth. Gains from higher construction productivity flow through the economy, as all industries rely on construction to some extent as part of their business investment. Contractions and expansions of economic activity are common phenomena in an economy. Three construction cycles occurred between the years 1970 and 2011 in Malaysia. The relationships between construction productivity and economic development are examined by the partial correlation method to establish the underlying factors driving the change in construction productivity. Construction productivity is statistically significantly correlated with gross domestic product (GDP) per capita in a positive direction for the 1985–98 and 1998–2009 cycles, but not the 1970–85 cycle. Fluctuations in construction activities and the influx of foreign workers underlie the changes of construction productivity in the 1985–98 cycle. There was less fluctuation in construction activities in the 1998–2009 cycle, with changes being mainly due to the fiscal stimulation policies of the government in attempting to stabilize the economy. The intensive construction of mega-projects resulted in resource constraints and cost pressures during the 1980s and 1990s. A better management of the ‘boom-bust’ nature of the construction business cycle is required to maintain the capability and capacity of the industry.

Desalination with a solar-assisted heat pump : an economic optimization

The solar-assisted heat pump (SAHP) desalination, based on the Rankin cycle, operates in low temperature and utilizes both solar and ambient energy. An experimental SAHP desalination system has been constructed at the National University of Singapore, Singapore. The system consisted of two main sections: an SAHP and a water distillation section. Experiments were carried out under the different meteorological condition of Singapore and results showed that the system had a performance ratio close to 1.3. The heat pump has a coefficient of performance of about 8, with solar collector efficiencies of 80% and 60% for evaporator and liquid collectors, respectively. Economic analysis showed that at a production rate of 900 L/day and an evaporator collector area of around 70m2 will have a payback period of about 3.5 years.

Parent's socio-economic status and social support as risks for child mortality : consideration of health equity in The Gambia

A matched case-control study of mortality to children under age five was conducted to consider associations with parents' socio-economic status and social support in the Farafenni Demographic Surveillance Site (DSS). Cases and controls were selected from Farafenni DSS, matched on date of birth, and parents were interviewed about personal resources and social networks. Parents with the lowest personal socio-economic status and social support were identified. Multivariate multinomial regression was used to consider whether the children of these parents were at increased risk of either infant or 1-4 mortality, in separate models using either parents' characteristics. There was no benefit found for higher SES or better social support with respect to child mortality. Children of fathers who had the poorest social support had lower 1-4 mortality risk (OR=0.52, p=0.037). Given that socio-economic status was not associated with child mortality, it seems unlikely that the explanation for the link between father's social support and mortality is linked to resource availability. Explanations for the risk effect of father's social ties may lie in decision-making around health maintenance and health care for children.

Technology, Natural Resources and Economic Growth: Improving the Environment for a Greener Future

Description Through a combination of global data analysis and focused country level analysis, this timely book provides answers to the most pertinent country and industry specific questions defining the current relationship between technology, natural resources and economic growth. Contents Contents: Preface Part I: Global Analysis 1. Economic Growth and the Environment 2. Energy Substitution and Carbon Dioxide Emissions 3. Pollution, Natural Resources, and Economic Growth 4. Trade Openness and Environmental Quality 5. Environmental Productivity 6. Energy Price-induced Technological Change 7. Trade-induced Technological Change 8. Regional Economic Integration Part II: Country-Level Analysis 9. Emissions Trading in the United States 10. Increasing Returns to Pollution Abatement in the United States 11. Policy-induced Competitiveness in the United States 12. Trade Liberalization, Technology, and the Environment 13. Policy Implementation and its Effectiveness in China 14. Clean Technological Inventions in Japan 15. Intervention of Economic Policy and its Nonlinear Effects in Japan 16. The Next Emerging Giants: India and Africa 17. Conclusion Index Further information Through a combination of global data analysis and focused country level analysis, this timely book provides answers to the most pertinent country and industry specific questions defining the current relationship between technology, natural resources and economic growth. Shunsuke Managi takes a distinctive approach by focusing on the design and implementation of environmental regulations that encourage technological progress and, in doing so, looks at ways to ensure productivity improvements in the face of increasingly stringent environmental regulations and natural resource depletion. The findings in this important book demonstrate how successful environmental policies can contribute to efficiency by encouraging, rather than inhibiting, technological innovation. Technology, Natural Resources and Economic Growth will provide a valuable resource for a wide readership including postgraduate students, researchers, academics and policy makers working in the fields of environmental and ecological economics.