Spontaneous and stimulated light emission due to radiative recombination in forward biased lead telluride P-N junctions

Since the discovery in 1962 of laser action in semiconductor diodes made from GaAs, the study of spontaneous and stimulated light emission from semiconductors has become an exciting new field of semiconductor physics and quantum electronics combined. Included in the limited number of direct-gap semiconductor materials suitable for laser action are the members of the lead salt family, i.e . PbS, PbSe and PbTe. The material used for the experiments described herein is PbTe . The semiconductor PbTe is a narrow band- gap material (E_g = 0.19 electron volt at a temperature of 4.2°K). Therefore, the radiative recombination of electron-hole pairs between the conduction and valence bands produces photons whose wavelength is in the infrared (λ ≈ 6.5 microns in air).

The p-n junction diode is a convenient device in which the spontaneous and stimulated emission of light can be achieved via current flow in the forward-bias direction. Consequently, the experimental devices consist of a group of PbTe p-n junction diodes made from p –type single crystal bulk material. The p - n junctions were formed by an n-type vapor- phase diffusion perpendicular to the (100) plane, with a junction depth of approximately 75 microns. Opposite ends of the diode structure were cleaved to give parallel reflectors, thereby forming the Fabry-Perot cavity needed for a laser oscillator. Since the emission of light originates from the recombination of injected current carriers, the nature of the radiation depends on the injection mechanism.

The total intensity of the light emitted from the PbTe diodes was observed over a current range of three to four orders of magnitude. At the low current levels, the light intensity data were correlated with data obtained on the electrical characteristics of the diodes. In the low current region (region A), the light intensity, current-voltage and capacitance-voltage data are consistent with the model for photon-assisted tunneling. As the current is increased, the light intensity data indicate the occurrence of a change in the current injection mechanism from photon-assisted tunneling (region A) to thermionic emission (region B). With the further increase of the injection level, the photon-field due to light emission in the diode builds up to the point where stimulated emission (oscillation) occurs. The threshold current at which oscillation begins marks the beginning of a region (region C) where the total light intensity increases very rapidly with the increase in current. This rapid increase in intensity is accompanied by an increase in the number of narrow-band oscillating modes. As the photon density in the cavity continues to increase with the injection level, the intensity gradually enters a region of linear dependence on current (region D), i.e. a region of constant (differential) quantum efficiency.

Data obtained from measurements of the stimulated-mode light-intensity profile and the far-field diffraction pattern (both in the direction perpendicular to the junction-plane) indicate that the active region of high gain (i.e. the region where a population inversion exists) extends to approximately a diffusion length on both sides of the junction. The data also indicate that the confinement of the oscillating modes within the diode cavity is due to a variation in the real part of the dielectric constant, caused by the gain in the medium. A value of τ ≈ 10^-9 second for the minority- carrier recombination lifetime (at a diode temperature of 20.4°K) is obtained from the above measurements. This value for τ is consistent with other data obtained independently for PbTe crystals.

Data on the threshold current for stimulated emission (for a diode temperature of 20. 4°K) as a function of the reciprocal cavity length were obtained. These data yield a value of J’_th = (400 ± 80) amp/cm² for the threshold current in the limit of an infinitely long diode-cavity. A value of α = (30 ± 15) cm^-1 is obtained for the total (bulk) cavity loss constant, in general agreement with independent measurements of free- carrier absorption in PbTe. In addition, the data provide a value of n_s ≈ 10% for the internal spontaneous quantum efficiency. The above value for n_s yields values of t_b ≈ τ ≈ 10^-9 second and t_s ≈ 10^-8 second for the nonradiative and the spontaneous (radiative) lifetimes, respectively.

The external quantum efficiency (n_d) for stimulated emission from diode J-2 (at 20.4° K) was calculated by using the total light intensity vs. diode current data, plus accepted values for the material parameters of the mercury- doped germanium detector used for the measurements. The resulting value is n_d ≈ 10%-20% for emission from both ends of the cavity. The corresponding radiative power output (at λ = 6.5 micron) is 120-240 milliwatts for a diode current of 6 amps.

Flight delay forecast due to weather using Data Mining

A Data Mining model that is able to predict if a flight is going to leave late due to a weather delay. It is used, to be able to get a later connection if you have a connecting flight.

Análise das estimativas de emissão de metano por aterros sanitários em projetos de MDL no Brasil.

Para a maioria dos municípios brasileiros, a instalação de um aterro sanitário é um desafio, sendo uma das dificuldades o custo elevado. Existem algumas formas de mitigar estes custos e uma delas é através do mercado de emissões. Com planejamento prévio suficiente, é possível queimar o metano gerado através da degradação do resíduo, podendo resultar em benefícios para o aterro tanto através do aproveitamento (geração de energia ou venda direta) quanto recebimento de algum tipo de certificado de emissões negociável. Incluído neste planejamento prévio suficiente está a realização da estimativa ex-ante de emissão de metano para saber previamente qual será o aproveitamento mais indicado e a eventual receita oriunda da queima. Quando analisados os projetos de MDL feitos em aterros sanitários, pode ser notado que estas estimativas são muitas vezes mal feitas, gerando valores estimados muito acima do realmente observado durante a operação. Este erro acarreta uma perda de credibilidade deste tipo de projeto, já que o número esperado é raramente alcançado. Existem alguns fatores que contribuem para esta discrepância de valores, sendo problemas operacionais (como exemplo podem ser citados deficiência no sistema de captura do biogás e problemas na captação e recirculação de lixiviado) e de modelagem (utilização de valores de entrada experimentais obtidos sob situações muito diferentes das encontradas nos aterros brasileiros, por exemplo) os possíveis principais vilões. Este trabalho visa apresentar e discutir os principais problemas na realização de estimativas prévias de emissão de metano em aterros sanitários utilizando projetos brasileiros de MDL registrados e que estejam atualmente emitindo créditos de carbono como base para analisar a qualidade das estimativas feitas atualmente. Além disto, busca-se também entrevistar profissionais da área para tentar obter diferentes pontos de vista sobre esta questão. Fica claro que os valores estimados, de um modo geral, são entre 40 e 50% superiores aos observados. Metade dos especialistas aponta problemas operacionais diversos como os principais contribuintes desta diferença, mas problemas na modelagem parecem influenciar decisivamente na realização das estimativas. A utilização de valores de entrada no modelo precisa ser criteriosamente analisada e devem ser utilizados números obtidos através de pesquisas que representem a realidade do aterro em questão.

Abundance of harbor porpoise (Phocoena phocoena) in three Alaskan regions, corrected for observer errors due to perception bias and species misidentification, and corrected for animals submerged from view

Estimating the abundance of cetaceans from aerial survey data requires careful attention to survey design and analysis. Once an aerial observer perceives a marine mammal or group of marine mammals, he or she has only a few seconds to identify and enumerate the individuals sighted, as well as to determine the distance to the sighting and record this information. In line-transect survey analyses, it is assumed that the observer has correctly identified and enumerated the group or individual. We describe methods used to test this assumption and how survey data should be adjusted to account for observer errors. Harbor porpoises (Phocoena phocoena) were censused during aerial surveys in the summer of 1997 in Southeast Alaska (9844 km survey effort), in the summer of 1998 in the Gulf of Alaska (10,127 km), and in the summer of 1999 in the Bering Sea (7849 km). Sightings of harbor porpoise during a beluga whale (Phocoena phocoena) survey in 1998 (1355 km) provided data on harbor porpoise abundance in Cook Inlet for the Gulf of Alaska stock. Sightings by primary observers at side windows were compared to an independent observer at a belly window to estimate the probability of misidentification, underestimation of group size, and the probability that porpoise on the surface at the trackline were missed (perception bias, g(0)). There were 129, 96, and 201 sightings of harbor porpoises in the three stock areas, respectively. Both g(0) and effective strip width (the realized width of the survey track) depended on survey year, and g(0) also depended on the visibility reported by observers. Harbor porpoise abundance in 1997–99 was estimated at 11,146 animals for the Southeast Alaska stock, 31,046 animals for the Gulf of Alaska stock, and 48,515 animals for the Bering Sea stock.

Changes in a benthic megafaunal community due to disturbance from bottom fishing and the establishment of a fishery closure

Trawling and dredging on Georges Bank (northwest Atlantic Ocean) have altered the cover of colonial epifauna, as surveyed through in situ photography. A total of 454 photographs were analyzed from areas with gravel substrate between 1994 and 2000 at depths of 40–50 m and 80–90 m. The cover of hydroids, bushy bryozoans, sponges, and tubeworms was generally higher at sites undisturbed by fishing than at sites classified as disturbed. The magnitude and significance of this effect depended on depth and year. Encrusting bryozoans were the only type of colonial epifauna positively affected by bottom fishing. Species richness of noncolonial epifauna declined with increased bottom fishing, but Simpson’s index of diversity typically peaked at intermediate levels of habitat disturbance. Species that were more abundant at undisturbed sites possessed characteristics that made them vulnerable to bottom fishing. These characteristics include emergent growth forms, soft body parts, low motility, use of complex microhabitats, long life spans, slow growth, and larval dispersal over short distances. After the prohibition of bottom fishing at one site, both colonial and noncolonial species increased in abundance. Populations of most taxa took two years or more to increase after the fishing closure. This finding indicates that bottom fishing needs to be reduced to infrequent intervals to sustain the benthic species composition of Georges Bank at a high level of biodiversity and abundance.

Use of genetic data to assess the uncertainty in stock assessments due to the assumed stock structure: the case of albacore (Thunnus alalunga) from the Atlantic Ocean

Stock assessments can be problematic because of uncertainties associated with the data or because of simplified assumptions made when modeling biological processes (Rosenberg and Restrepo, 1995). For example, the common assumption in stock assessments that stocks are homogeneous and discrete (i.e., there is no migration between the stocks) is not necessarily true (Kell et al., 2004a, 2004b).