Bombesin affects the central nervous system to produce sodium intake inhibition in rats

Bombesin (BN) elicits in the rat important behavioural modifications, including inhibition of food and of water intake. Recently, it has been observed that the peptide also inhibits the intake of sodium chloride. To stare whether BN possesses a selective antinatriorexic effect or it elicits only an aspecific depression of ingestive behaviour, we studied the effects of this peptide on the intake of sodium, water or sucrose of Wistar rats after injections into the fourth brain ventricle or into selected brain areas involved in the control of sodium intake, containing BN-like peptides and/or their precursors or specific receptors. We observed that: a) BN (100-200 ng/rat) injected into the fourth brain ventricle inhibits not only the intake of 2% NaCl of sodium depleted rats but also that of water and of 5% sucrose; b) BN (5-50 ng/rat) administered into the nucleus of the solitary tract and the medial amygdala does not influence the intake of these fluids and c) BN (5-50 ng/rat) injected into the paraventricular nucleus does not influence the intake of water and 5% sucrose but potently inhibits that of 2% NaCl. We concluded that the inhibitory effect elicited on salt intake by intracranial administration of BN is selective for this behaviour and is not the expression of an aspecific depression of ingestive behaviour. (C) 1998 Elsevier B.V.

Effect of the fluorination of DLC film on the corrosion protection of aluminum alloy (AA 5052)

It is presented a study conducted on the physical and electrochemical properties of fluorinated a-C:H films deposited onto a commercial aluminum alloy (AA 5052). The coatings were deposited from mixtures of 91% of acetylene and 9% of argon by plasma immersion ion implantation and deposition technique, PIIID. Total gas pressure was 44 Pa and deposition time (t(dep)) was varied from 300 to 1200 s. The depositing plasmas were generated by the application of radiofrequency power (13.56 MHz, 100W) to the upper electrode and high voltage negative pulses (2400 V. 300 Hz) to the sample holder. Fluorine was incorporated in a post-deposition plasma treatment (13.56 MHz, 70W, 13 Pa) generated from sulfur hexafluoride atmosphere. Chemical structure and composition of the films were investigated using infrared reflectance/absorbance spectroscopy and X-ray photoelectron spectroscopy. The corrosion resistance of the layers was determined by electrochemical impedance spectroscopy (EIS) in a 3.5% NaCl solution, at room temperature. Films presented good adhesion to the substrates and are classified as hydrogenated amorphous carbon (a-C:H) with oxygen traces. Fluorine was detected in all the samples after the post-deposition treatment being its proportion independent on the deposition time. Film thickness presented different tendencies with t(dep), revealing the variation of the deposition rate as a function of the deposition time. Such fluorinated a-C:H films improved the corrosion resistance of the aluminum surface. In a general way the corrosion resistance was higher for films prepared with lower deposition times. The variation of sample temperature with t(dep) was found to be decisive for the concentration of defects in the films and, consequently, for the performance of the samples in electrochemical tests. Results are interpreted in terms of the energy delivered to the growing layer by ionic bombardment. (C) 2010 Elsevier B.V. All rights reserved.

Lubricating coating prepared by PIIID on a forming tool

In this work, the performance of a-C: H films produced by the hybrid Plasma Immersion Ion Implantation and Deposition technique as lubricating layers for a steel forming tool has been investigated. Hardened steel (AISI M2, 64 HRC) plates coated with a commercial TiN layer were used as substrates and the films were deposited in a vacuum chamber fitted with two parallel-plate electrodes. The discharges were generated in atmospheres composed of 91% C2H2 and 9% Ar by the application of radiofrequency power (13.56 MHz, 100 W) to the upper electrode while the lower one, also used as the sample holder, was biased with high voltage negative pulses (3.6 kV, 30 mu s, 300 Hz). A deposition time of 840 s was used. The effects of the gas pressure, p, on thickness, molecular structure, wettability, surface morphology and topography, hardness and friction coefficient of the films lwere investigated. Film thickness increased from 0.3 to 0.5 mu m when p was increased from 2.7 to 16.5 Pa. Generally, the films were slightly hydrophilic, with contact angles of around 84 degrees, and the deposition decreased the roughness of the steel. A polymer-like structure was detected in high pressure depositions and an amorphous carbon structure derived from the low pressure procedures. Hardness decreased from 8.2 to 7.0 GPa with increasing p. Improvement in tribological performance was indicated by the fall in the friction coefficient from 0.5 to 0.2 as the deposition pressure was reduced. Operating at the latter value (of mu) would lead to a significant reduction in wear and hence to significant economy in diverse industrial applications.

When small is different: The case of membranes inside tubes

Recently, classical elasticity theory for thin sheets was used to demonstrate the existence of a universal structural behavior describing the confinement of sheets inside cylindrical tubes. However, this kind of formalism was derived to describe macroscopic systems. A natural question is whether this behavior still holds at nanoscale. In this work, we have investigated through molecular dynamics simulations the structural behavior of graphene and boron nitride single layers confined into nanotubes. Our results show that the class of universality observed at macroscale is no longer observed at nanoscale. The origin of this discrepancy is addressed in terms of the relative importance of forces and energies at macro and nano scales. © 2012 Materials Research Society.

Preparação de filmes policristalinos de GaN pela técnica de sputtering reativo a baixas temperaturas de substrato

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Desenvolvimento de revestimentos híbridos do sistema siloxano-PMMA com aplicações anticorrosivas

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo in vitro de braquetes ortodônticos: avaliação biomecânica e liberação de íons

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise do comportamento biomecânico de fios ortodônticos após tratamento de superfície

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Influência do tratamento de superfície na força friccional de fios ortodônticos de NiTi-estudo in vitro

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aprimoramento da técnica da mínima quantidade de lubrificante (MQL) no processo de retificação cilíndrica externa de mergulho de aços endurecidos

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Efeito protetivo produzido pela aplicação de um filme de carbono amorfo na superfície de um ferramental para conformação

Pós-graduação em Ciência e Tecnologia de Materiais - FC

Efeito da incorporação de flúor nas propriedades de superfície de filmes DE aC:H

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Um estudo sobre a influência de defeitos de diferente natureza nas propriedades eletrônicas de nanotubos usando o método das ondas cilindricas linearizadas aumentadas

Os nanotubos de carbono e nitreto de boro são nano estruturas unidimensionais que apresentam comportamento tanto metálico quanto semicondutor, dependendo da sua quiralidade, exceto para os nanotubos de nitreto de boro que apresentam sempre características semicondutoras, caso não estejam dopados. Devido suas características eletrônicas, os nanotubos apresentam grandes possibilidades de aplicação em dispositivos de nanoeletrônica, tais como nanodiodos, nanotransistores e como elementos de interconexão, dentre outros. Por esta razão, é importante compreender como fatores externos agem sobre as propriedades de tais materiais. Um desses fatores externos é a introdução de defeitos nos nanotubos. Tais defeitos são a ausência de um ou mais átomos de carbono, pertencente ao nanotubo de carbono e, de nitrogênio ou boro, para os nanotubos de nitreto de boro, ou ainda, a substituição de átomos de carbono, nitrogênio ou boro por diferentes átomos na estrutura dos correspondentes nanotubos. Este trabalho apresenta um estudo teórico dos efeitos da introdução de defeitos, por substituição, nas propriedades eletrônicas dos nanotubos de carbono e nitreto de boro, via simulação ab-initio. Avaliam-se as estruturas de banda de energia e densidade de estados de nanotubos de carbono semicondutores e metálicos tipos armchair e zig-zag e apenas do tipo armchair para os nanotubos de nitreto de boro usando o método LACW – método das ondas cilíndricas linearizadas aumentadas. Além disso, devido a crescente importância dos nanotubos de nitreto de boro, fazemos um estudo sistematizado da estrutura eletrônica desses nanotubos, para uma supercélula formada por três células unitárias, usando dopagem intrínseca, bem como uma análise quantitativa, baseada na energia total e banda proibida, de estabilidade dessas estruturas.

Confecção e caracterização de filmes finos de boro para a medida da taxa de reação 10B(N, a)7LI na terapia por captura de nêutrons pelo boro

The Boron Neutron Capture Therapy (BNCT), based on the 10B(n,α)7Li reaction, represents a promising modality for the treatment of cancers that are resistents to conventional treatments. So, it is necessary to find drugs (boron compounds) with high selectivity for each type of cancer, the neutrons source should be well characterized and the rate of 10B(n,α)7Li reaction should be measured with great accuracy as possible. This study aimed to develop a method for manufacturing thin films of boron, for measure the 10B(n,α)7Li reaction, and analyze the uniformity of the films. Five thin films of boron were manufactured with three different concentrations of boric acid, heated to transform the acid in boron, irradiated with thermic neutrons coupled to CR-39 detectors, in BNCT line at the reactor IEA-R1 IPEN/CNEN, São Paulo. After the irradiation, the detectors were chemically attacked with NaOH to reveal the tracks. The methodology presented is effective because it resulted in deposition of boron as thin film enabling the quantitative analysis of 10B(n,α)7Li reaction. The analysis of the uniformity of density of the induced tracks in CR-39 shows that, in most of the films, there is no uniformity in surface distribution of boron, but when the film is divided, we obtain some uniform sectors

Tratamento térmico de filmes supercondutores do sistema BSCCO utilizando forno de micro-ondas doméstico

Pós-graduação em Ciência dos Materiais - FEIS