La Península Ibérica en el transporte masivo de mercancías entre Europa y África : futuras autopistas del mar

La competitividad del transporte de mercancías depende del estado y funcionamiento de las redes existentes y de sus infraestructuras, no del modo de transporte. En concreto, la rentabilidad o la reducción de los costes de producción del transporte marítimo se vería incrementado con el uso de buques de mayor capacidad y con el desarrollo de plataformas portuarias de distribución o puertos secos, ya que el 90% del comercio entre la Unión Europea y terceros países se realiza a través de sus puertos a un promedio de 3,2 billones de toneladas de mercancías manipuladas cada año y el 40% del tráfico intraeuropeo utiliza el transporte marítimo de corta distancia. A pesar de que los puertos europeos acogen anualmente a más de 400 millones de pasajeros, los grandes desarrollos se han producido en los puertos del norte de Europa (Róterdam, Amberes, Ámsterdam). Los países del Sur de Europa deben buscar nuevas fórmulas para ser más competitivos, ya sea mediante creación de nuevas infraestructuras o mediante refuerzo de las existentes, ofreciendo los costes de los puertos del Norte. El fomento del transporte marítimo y fluvial como alternativa al transporte por carretera, especialmente el transporte marítimo de corta distancia, ha sido impulsado por la Comisión Europea (CE) desde 2003 a través de programas de apoyo comunitario de aplicación directa a las Autopistas del Mar, a modo de ejemplo, cabría citar los programas Marco Polo I y II, los cuales contaron con una dotación presupuestaria total de 855 millones de euros para el período 2003 – 2013; en ese período de tiempo se establecieron objetivos de reducción de congestión vial y mejora del comportamiento medio ambiental del sistema de transporte de mercancías dentro de la comunidad y la potenciación de la intermodalidad. El concepto de Autopista del Mar surge en el Libro Blanco de Transportes de la Comisión Europea “La política europea de transportes de cara al 2010: La hora de la verdad” del 12 de diciembre de 2001, en el marco de una política europea para fomento y desarrollo de sistemas de transportes sostenibles. Las Autopistas del Mar consisten en rutas marítimas de corta distancia entre dos puntos, de menor distancia que por vía terrestre, en las que a través del transporte intermodal mejoran significativamente los tiempos y costes de la cadena logística, contribuyen a la reducción de accidentes, ruidos y emisiones de CO2 a la atmósfera, permite que los conductores pierdan horas de trabajo al volante y evita el deterioro de las infraestructuras terrestres, con el consiguiente ahorro en mantenimiento. La viabilidad de una Autopista del Mar depende tanto de factores de ubicación geográficos, como de características propias del puerto, pasando por los diferentes requerimientos del mercado en cada momento (energéticos, medio ambientales y tecnológicos). Existe un elemento nuevo creado por la Comisión Europea: la red transeuropea de transportes (RTE-T). En el caso de España, con sus dos accesos por los Pirineos (La Junquera e Irún) como únicos pasos terrestres de comunicación con el continente y con importantes limitaciones ferroviarias debido a los tres anchos de vía distintos, le resta competitividad frente al conjunto europeo; por el contrario, España es el país europeo con más kilómetros de costa (con más de 8.000 km) y con un emplazamiento geográfico estratégico, lo que le convierte en una plataforma logística para todo el sur de Europa, por lo que las Autopistas del Mar tendrán un papel importante y casi obligado para el desarrollo de los grandes corredores marítimos que promueve Europa. De hecho, Gijón y Vigo lo han hecho muy bien con sus respectivas líneas definidas como Autopistas del Mar y que conectan con el puerto francés de Nantes-Saint Nazaire, ya que desde ahí los camiones pueden coger rutas hacia el Norte. Paralelamente, la Unión Europea ha iniciado los pasos para el impulso de la primera Autopista del Mar que conectará España con el mercado de Reino Unido, concretamente los Puertos de Bilbao y Tilbury. Además, España e Italia sellaron un acuerdo internacional para desarrollar Autopistas del Mar entre ambos países, comprometiéndose a impulsar una docena de rutas entre puertos del litoral mediterráneo español y el italiano. Actualmente, están en funcionando los trayectos como Barcelona-Génova, Valencia-Civitavecchia y Alicante- Nápoles, notablemente más cortos por mar que por carretera. Bruselas identificó cuatro grandes corredores marítimos que podrían concentrar una alta densidad de tráfico de buques, y en dos de ellos España ya tenía desde un principio un papel crucial. La Comisión diseñó el 14 de abril de 2004, a través del proyecto West-Mos, una red de tráfico marítimo que tiene como vías fundamentales la denominada Autopista del Báltico (que enlaza Europa central y occidental con los países bálticos), la Autopista de Europa suroriental (que une el Adriático con el Jónico y el Mediterráneo más oriental) y también la Autopista de Europa occidental y la Autopista de Europa suroccidental (que enlazan España con Reino Unido y la Francia atlántica y con la Francia mediterránea e Italia, respectivamente). Para poder establecer Autopistas del Mar entre la Península Ibérica y el Norte de Europa primará especialmente la retirada de camiones en la frontera pirenaica, donde el tráfico pesado tiene actualmente una intensidad media diaria de 8.000 unidades, actuando sobre los puntos de mayor congestión, como por ejemplo los Alpes, los Pirineos, el Canal de la Mancha, las carreteras fronterizas de Francia y Euskadi, y proponiendo el traslado de las mercancías en barcos o en trenes. Por su parte, para contar con los subsidios y apoyos europeos las rutas seleccionadas como Autopistas del Mar deben mantener una serie de criterios de calidad relacionados con la frecuencia, coste “plataforma logística a plataforma logística”, simplicidad en procedimientos administrativos y participación de varios países, entre otros. Los estudios consideran inicialmente viables los tramos marítimos superiores a 450 millas, con un volumen de unas 15.000 plataformas al año y que dispongan de eficientes comunicaciones desde el puerto a las redes transeuropeas de autopistas y ferrocarril. Otro objetivo de las Autopistas del Mar es desarrollar las capacidades portuarias de forma que se puedan conectar mejor las regiones periféricas a escala del continente europeo. En lo que a Puertos se refiere, las terminales en los muelles deben contar con una línea de atraque de 250 m., un calado superior a 8 m., una rampa “ro-ro” de doble calzada, grúas portainer, y garantizar operatividad para un mínimo de dos frecuencias de carga semanales. El 28 de marzo de 2011 se publicó el segundo Libro Blanco sobre el futuro del transporte en Europa “Hoja de ruta hacia un espacio único europeo de transporte: por una política de transportes competitiva y sostenible”, donde se definió el marco general de las acciones a emprender en los próximos diez años en el ámbito de las infraestructuras de transporte, la legislación del mercado interior, la reducción de la dependencia del carbono, la tecnología para la gestión del tráfico y los vehículos limpios, así como la estandarización de los distintos mercados. Entre los principales desafíos se encuentran la eliminación de los cuellos de botella y obstáculos diversos de nuestra red europea de transporte, minimizar la dependencia del petróleo, reducir las emisiones de GEI en un 60% para 2050 con respecto a los niveles de 1990 y la inversión en nuevas tecnologías e infraestructuras que reduzcan estas emisiones de transporte en la UE. La conexión entre la UE y el norte de África provoca elevados niveles de congestión en los puntos más críticos del trayecto: frontera hispano-francesa, corredor del Mediterráneo y el paso del estrecho. A esto se le añade el hecho de que el sector del transporte por carretera está sujeto a una creciente competencia de mercado motivada por la eliminación de las barreras europeas, mayores exigencias de los cargadores, mayores restricciones a los conductores y aumento del precio del gasóleo. Por otro lado, el mercado potencial de pasajeros tiene una clara diferenciación en tipos de flujos: los flujos en el período extraordinario de la Operación Paso del Estrecho (OPE), enfocado principalmente a marroquíes que vuelven a su país de vacaciones; y los flujos en el período ordinario, enfocado a la movilidad global de la población. Por tanto, lo que se pretende conseguir con este estudio es analizar la situación actual del tráfico de mercancías y pasajeros con origen o destino la península ibérica y sus causas, así como la investigación de las ventajas de la creación de una conexión marítima (Autopista del Mar) con el Norte de África, basándose en los condicionantes técnicos, administrativos, económicos, políticos, sociales y medio ambientales. The competitiveness of freight transport depends on the condition and operation of existing networks and infrastructure, not the mode of transport. In particular, profitability could be increased or production costs of maritime transport could be reduced by using vessels with greater capacity and developing port distribution platforms or dry ports, seeing as 90% of trade between the European Union and third countries happens through its ports. On average 3,2 billion tonnes of freight are handled annualy and 40% of intra-European traffic uses Short Sea Shipping. In spite of European ports annually hosting more than 400 million passengers, there have been major developments in the northern European ports (Rotterdam, Antwerp, Amsterdam). Southern European countries need to find new ways to be more competitive, either by building new infrastructure or by strengthening existing infrastructure, offering costs northern ports. The use of maritime and river transport as an alternative to road transport, especially Short Sea Shipping, has been driven by the European Commission (EC) from 2003 through community support programs for the Motorways of the Sea. These programs include, for example, the Marco Polo I and II programs, which had a total budget of 855 million euros for the period 2003-2013. During this time objectives were set for reducing road congestion, improving the environmental performance of the freight transport system within the community and enhancing intermodal transport. The “Motorway of the Sea” concept arises in the European Commission’s Transport White Paper "European transport policy for 2010: time to decide" on 12 December 2001, as part of a European policy for the development and promotion of sustainable transport systems. A Motorway of the Sea is defined as a short sea route between two points, covering less distance than by road, which provides a significant improvement in intermodal transport times and to the cost supply chain. It contributes to reducing accidents, noise and CO2 emissions, allows drivers to shorten their driving time and prevents the deterioration of land infrastructure thereby saving on maintenance costs. The viability of a Motorway of the Sea depends as much on geographical location factors as on characteristics of the port, taking into account the different market requirements at all times (energy, environmental and technological). There is a new element created by the European Commission: the trans-European transport network (TEN-T). In the case of Spain, with its two access points in the Pyrenees (La Junquera and Irun) as the only land crossings connected to the mainland and major railway limitations due to the three different gauges, it appears less competitive compared to Europe as a whole. However, Spain is the European country with the most kilometers of coastline (over 8,000 km) and a strategic geographical location, which makes it a logistics platform for the all of Southern Europe. This is why the Motorways of the Sea will have an important role, and an almost necessary one to develop major maritime corridors that Europe supports. In fact, Gijon and Vigo have done very well with their respective sea lanes defined as Motorways of the Sea and which connect with the French port of Nantes-Saint Nazaire, as from there trucks can use nort-heading routes. In parallel, the European Union has taken the first steps to boost the first Motorway of the Sea linking Spain to the UK market, specifically the ports of Bilbao and Tilbury. Furthermore, Spain and Italy sealed an international agreement to develop Motorways of the Sea between both countries, pledging to develop a dozen routes between ports on the Spanish and Italian Mediterranean coasts. Currently, there are sea lanes already in use such as Barcelona-Genova, Valencia-Civitavecchia and Alicante-Naples, these are significantly shorter routes by sea than by road. Brussels identified four major maritime corridors that could hold heavy concentrate shipping traffic, and Spain had a crucial role in two of these from the beginning. On 14 April 2004 the Commission planned through the West-Mos project, a network of maritime traffic which includes the essential sea passages the so-called Baltic Motorway (linking Central and Western Europe with the Baltic countries), the southeast Europe Motorway (linking the Adriatic to the Ionian and eastern Mediterranean Sea), the Western Europe Motorway and southwestern Europe Motorway (that links Spain with Britain and the Atlantic coast of France and with the French Mediterranean coast and Italy, respectively). In order to establish Motorways of the Sea between the Iberian Peninsula and Northern Europe especially, it is necessary to remove trucks from the Pyrenean border, where sees heavy traffic (on average 8000 trucks per day) and addressing the points of greatest congestion, such as the Alps, the Pyrenees, the English Channel, the border roads of France and Euskadi, and proposing the transfer of freight on ships or trains. For its part, in order to receive subsidies and support from the European Commission, the routes selected as Motorways of the Sea should maintain a series of quality criteria related to frequency, costs "from logistics platform to logistics platform," simplicity in administrative procedures and participation of several countries, among others. To begin with, studies consider viable a maritime stretch of at least 450 miles with a volume of about 15,000 platforms per year and that have efficient connections from port to trans-European motorways and rail networks. Another objective of the Motorways of the Sea is to develop port capacity so that they can better connect peripheral regions across the European continent. Referring ports, the terminals at the docks must have a berthing line of 250 m., a draft greater than 8 m, a dual carriageway "ro-ro" ramp, portainer cranes, and ensure operability for a minimum of two loads per week. On 28 March 2011 the second White Paper about the future of transport in Europe "Roadmap to a Single European Transport Area – Towards a competitive and resource efficient transport system" was published. In this Paper the general framework of actions to be undertaken in the next ten years in the field of transport infrastructure was defined, including internal market legislation, reduction of carbon dependency, traffic management technology and clean vehicles, as well as the standardization of different markets. The main challenges are how to eliminate bottlenecks and various obstacles in our European transport network, minimize dependence on oil, reduce GHG emissions by 60% by 2050 compared to 1990 levels and encourage investment in new technologies and infrastructure that reduce EU transport emissions. The connection between the EU and North Africa causes high levels of congestion on the most critical points of the journey: the Spanish-French border, the Mediterranean corridor and Gibraltar Strait. In addition to this, the road transport sector is subject to increased market competition motivated by the elimination of European barriers, greater demands of shippers, greater restrictions on drivers and an increase in the price of diesel. On the other hand, the potential passenger market has a clear differentiation in type of flows: flows in the special period of the Crossing the Straits Operation (CSO), mainly focused on Moroccans who return home on vacation; and flows in the regular session, focused on the global mobile population. Therefore, what I want to achieve with this study is present an analysis of the current situation of freight and passengers to or from the Iberian Peninsula and their causes, as well as present research on the advantages of creating a maritime connection (Motorways of the Sea) with North Africa, based on the technical, administrative, economic, political, social and environmental conditions.

Estudio acústico de la sala 8 de los cines Kinépolis de Ciudad de la Imagen

Este proyecto consistira en la realization de un estudio aciistico sobre la sala 8 de los cines Kinepolis de Ciudad de la Imagen, que dispone de 408 butacas. Los cines Kinepolis es uno de los mayores complejos multisala de Europa. Cuenta con mas de 9.200 butacas en total distribuidas en 25 salas a las que se accede mediante dos grandes pasillos conectados por el hall. En 1998, ano de su apertura, el complejo recibio el Record Guinness a la sala cinematografica mas grande del mundo, que dispone de 996 butacas. El objetivo de este proyecto es conseguir caracterizar acusticamente una sala de cine a traves de la medicion de parametros acusticos de la sala y de un modelo virtual de la misma. Para llevar a cabo el proyecto, primero se van a realizar tanto una medicion geometrica como acustica de la sala mediante el sistema de medida DIRAC. Los resultados de estas mediciones nos serviran para construir y validar un modelo virtual de la sala real con el software de simulacion EASE. La medicion acustica se va a realizar con el sistema de medicion DIRAC. Este sistema nos dara information sobre una amplia variedad de parametros acusticos. En este proyecto no se va a trabajar con todos ellos, solo con los mas significativos. Estos se describen a continuacion en la introduccion teorica. La medicion geometrica nos va a servir para construir un modelo virtual que tenga las mismas dimensiones que la sala original. Esta medicion la realizaremos mediante un medidor laser y una cinta metrica. Una vez construido el modelo virtual, se procedera a su validacion. Este proceso se realiza ajustando el tiempo de reverberacion del modelo mediante la introduccion de distintos materiales acusticos en las superficies del mismo, de manera que, variando la absorcion de la sala, el tiempo de reverberacion promedio del modelo se asemeje lo mas posible al medido en la sala real. Este proceso tiene como objetivo comprobar que el modelo virtual tiene un comportamiento acustico similar al de la sala real. Es necesario validar adecuadamente el modelo para que las comparaciones y conclusiones sean fiables. Por ultimo, tras la simulacion acustica del modelo, se compararan los resultados simulados con los medidos en la sala. En este proceso se contrastaran algunos de los parametros que guardan relation con el tiempo de reverberacion. De esta manera se verificara si el tiempo de reverberacion es o no un parametro acustico fiable para la validacion de un modelo virtual de una sala de cine. Anteriormente se han realizado proyectos iguales de otras salas de diferente tamano de Kinepolis. El objetivo de realizar el mismo estudio en distintas salas, es comprobar si el tamano de la sala influye en la validacion de los modelos virtuales mediante el tiempo de reverberacion. ABSTRACT. This Project consists on the development of an acoustic research of the movie theater 8 of the Kinepolis complex in Ciudad de la Imagen, Madrid. This room has 408 spots. Kinepolis is one of the biggest multiplex complexes in Europe. It has 9,200 locations disposed in 25 rooms. There are two large corridors which give access to all of theaters. In the middle of the structure, there is the main hall that connects these corridors. In 1998, at the time when the complex was open, it was awarded with the Record Guinness for the biggest theater in the world, which has 996 locations. The target of this project is to successfully characterize the acoustics of a movie theater through reverberation time and a virtual model. In order to reach this goal, in the first place, we are going to perform both, an acoustic and a geometric measurement of the room using DIRAC measurement system. The results of these measures will allow us to build and validate a virtual model of the room, using the simulation software EASE. We are going to use the DIRAC system in order to accomplish the acoustic measure. This operation gives us a huge variety of acoustic parameters. Not all of these are going to be used for this research, only the most significant ones. These are described in the theoretical introduction. The geometric measure is essential to help us to build the virtual model, because the model has to be exactly equal as the real room. This measurement will be performed with an electronic distance meter and a measuring tape. Once the virtual model is finished, it will be proved. This validation process will be realized by adjusting the reverberation time in the model. We will change the walls materials, therefore, the overall absorption of the room will change. We want the model reverberation time resemble to the real one. This practice is going to ensure that the model acoustic performance is close to the real one. In addition, it has to be successfully validate of we want the future comparisons to be reliable. Finally, after the model virtual simulation, we will compare the simulated results with the measure in the room. In this process, we will compare not only the reverberation time, but others parameters that keep relation with the reverberation time. We will verify this way, if the reverberation time is or is not an appropriate acoustic parameter to validate a virtual model of a movie theater. There have been done others similar acoustic researches in different theaters with different sizes. The aim of performing similar researches in different rooms is to determine if the size of the room infers in the validation process.

Arrest of neuronal migration by excitatory amino acids in hamster developing brain

The influence of the excitotoxic cascade on the developing brain was investigated using ibotenate, a glutamatergic agonist of both N-methyl-d-aspartate (NMDA) ionotropic receptors and metabotropic receptors. Injected in the neopallium of the golden hamster at the time of production of neurons normally destined for layers IV, III, and II, ibotenate induces arrests of migrating neurons at different distances from the germinative zone within the radial migratory corridors. The resulting cytoarchitectonic patterns include periventricular nodular heterotopias, subcortical band heterotopias, and intracortical arrests of migrating neurons. The radial glial cells and the extracellular matrix are free of detectable damage that could suggest a defect in their guiding role. The migration disorders are prevented by coinjection of dl-2-amino-7-phosphoheptanoic acid, an NMDA ionotropic antagonist, but are not prevented by coinjection of l(+)-2-amino-3-phosphonopropionic acid, a metabotropic antagonist. This implies that an excess of ionic influx through the NMDA channels of neurons alters the metabolic pathways supporting neuronal migration. Ibotenate, a unique molecular trigger of the excitotoxic cascade, produces a wide spectrum of abnormal neuronal migration patterns recognized in mammals, including the neocortical deviations encountered in the human brain.

Fragmentação florestal e prioridades para a conservação da biodiversidade

Um modelo dedicado ao planejamento da conservação e restauração de habitats deve incluir informações estratégicas para assegurar a eficácia e de fácil obtenção, para assegurar a agilidade necessária. Planos e estratégias para conservação usualmente são complexos e demandam informações detalhadas, difíceis de se obter, como inventários biológicos e certos tipos de mapeamento, o que traz limitações em termos de disponibilidade, qualidade e custo das informações. Assim, procurou-se testar a eficiência de métodos simples para a seleção, em escala local, de áreas prioritárias para conservação de habitats fortemente fragmentados e reduzidos, uma situação comum no sul do Brasil, usando dados de imagens LANDSAT e planos de informações disponíveis em mapeamentos comuns, e trabalho de campo. Inicialmente analisou-se a estrutura da paisagem e o padrão de fragmentação em parte da região norte do estado do Paraná, e testar se tamanho e forma são adequados para selecionar os fragmentos florestais mais importantes para a conservação, ou seja, as que contribuem para manter maior quantidade e melhor qualidade de habitats, bem como tenham maior impacto (positivo) na conectividade e em outras variáveis da paisagem. Os resultados mostram que a floresta madura cobre cerca de 3% da paisagem, e a cobertura florestal total atinge perto de 8%, consistindo principalmente de pequenos fragmentos (82% tem entre 1 e 10 ha). Fragmentos grandes (>100 ha) são apenas 1,4% dos remanescentes, mas somam 34% da área de floresta. Apesar de estarem sujeitos a efeitos de borda em toda ou quase toda a sua área, fragmentos pequenos mostraram ter um papel importante na conectividade da paisagem. Numa área maior, foi feita uma pré-seleção de áreas com potencial para estabelecimento de redes de conservação. A pré-seleção procurou responder às seguintes perguntas: 1-Quais são os sítios com maior potencial para a conservação da biodiversidade? 2-Quais são os sítios sob maior risco para objetivos de conservação? e 3-Quais sítios têm melhores oportunidades para o estabelecimento de zonas de conservação de uso múltiplo? Foi identificado um conjunto de 11 fragmentos pertencendo a 5 sub-regiões, sofrendo variados graus de pressão antrópica. Adicionalmente, usando medidas simples de estrutura da paisagem, relacionadas com tamanho, forma e conectividade dos fragmentos, procurou-se identificar tipos estruturais de fragmentos, como uma forma alternativa para auxiliar o estabelecimento de prioridades para conservação a partir do seu papel, efetivo ou potencial, na paisagem. Foram identificados 5 tipos de fragmentos, pequenos (ilhotas isoladas, trampolins), médios (núcleos auxiliares e corredores) e grandes (núcleos principais), que podem ser usados para subsidiar estratégias de conservação. Utilizando informações sobre a estrutura da paisagem, hidrografia e legislação ambiental, propõe-se aqui uma estratégia de conservação para o complexo das bacias dos ribeirões Apertados-Três Bocas (CATB), ordenando atividades de restauração e conservação de fragmentos florestais, criação e expansão de unidades de conservação, além da proposição de formas de uso do solo compatíveis com o entorno de unidades de conservação.

Influência do uso de trens de caixa móvel na implantação e operação de novas ferrovias.

O presente trabalho tem por objetivo primário abordar os atuais conhecimentos sobre o transporte ferroviário interurbano e regional de passageiros, com foco na tecnologia dos trens de caixa móvel, também conhecidos como trens pendulares. Como objetivo secundário busca-se analisar a influência dos trens de caixa móvel ou pendulares na implantação e operação de novas ferrovias, com ênfase na adequação em fase de projeto, mostrando-se o potencial dessa tecnologia para o aumento da velocidade média e a redução dos tempos de viagem. São tratados os tópicos relevantes para o transporte ferroviário de passageiros, como o conforto do usuário, as especificações técnicas do material rodante e referências dos custos de implantação e operação envolvidos, mostrando-se também dentro de cada aspecto as diferenças dos trens pendulares em relação aos trens convencionais. Três estudos de caso elaborados terão como objetivo explicitar as interveniências da operação dos trens pendulares com o projeto ferroviário, em especial com o projeto geométrico, e através de simulações de marcha e comparações, mostrar de maneira prática o potencial do uso dos trens pendulares. Através do embasamento teórico e dos estudos de caso, é feita uma análise crítica de modo a possibilitar tanto um entendimento do transporte ferroviário de passageiros, quanto do material rodante de caixa móvel e suas possibilidades. Os resultados dos estudos de caso e a análise crítica mostram uma redução significativa dos tempos de viagem, entre 8,1 e 20,0%, mediante a operação de trens pendulares em substituição ao material rodante convencional.

Land use practices near tributary rivers and their influence on duckweed (Lemna obscura) bloom in the southern part of Lake Maracaibo, Venezuela: Sustainable solutions to address the issue

This study examined the relationship between land-use practices near tributary rivers in South Lake Maracaibo and the appearance of duckweed (Lemna obscura) in the lake. Four rivers were studied: The Mucujepe, Capaz, Guamo and Frio. Eight factors were assessed: rivers, sediments, erosion, soils, fertilizers, water quality, land use activities and vegetation corridors. Satellite images, official cartography, field visits and observations, water samples and personal communication with organizations involved were held to get an accurate and current assessment of the conditions. The study revealed the land-use practices surrounding the Pan-American Zone Rivers contribute to the duckweed blooming in Lake Maracaibo.

Aspectos constructivos y decorativos de la villa romana de Puente de la Olmilla (Albaladejo, Ciudad Real)

El esquema constructivo de esta villa responde al modelo típico romano: una serie de estancias distribuidas alrededor de un patio central, que las ilumina y desde el que se accede a ellas mediante los pasillos circundantes, cubiertos con pisos de mosaico, al igual que varias habitaciones (dos de ellas adornadas con mosaicos figurativos). Puente de la Olmilla tenía un pórtico en la fachada, combinación que corresponde a un tipo de construcción poco común en Hispania. Esta villa es un claro testimonio del profundo proceso romanizador sufrido por el medio rural en este territorio. Sin duda, este ámbito de la Meseta Sur tenía para los romanos un carácter estratégico por su privilegiado emplazamiento geográfico dentro de la Península Ibérica y esa fue una de las causas de que lo incluyeran en su red viaria.

Workshops in “Construction of Structures I”: A new teaching methodology in the Building Engineering Degree

Both the current economic situation in the construction sector and the continuous normative changes in the building area imply the use of new methodologies to enhance students’ competences in the degree of Building Engineer. The aim of this paper is to present, analyse and discuss the development of constructive workshops as a new teaching methodology used in the subject of Construction of Structures I at the University of Alicante to complement the constructive and technical knowledge acquired by our students and to enhance their communicative and representation skills essential for their professional practice in the future. The used methodology is based on the development of three-dimensional construction details (in groups of 3 or 4 students) to be shown in two A1-pannels exposed in the corridors of the Polytechnic School. Thus, students’ work approaches constructive problems in a global way by discussing simultaneously with teachers and other groups about the most suitable solution on each case. This contribution has multiperspective results and improves criticism of students in different areas, encouraging new learning strategies and active participation. What is more, on-line information and web applications have been used to prepare and organize this kind of workshops, allowing students to use new technologies as a complementary learning methodology. In conclusion, the use of these new workshops in the Degree of Building Engineer stimulates an interactive class versus a traditional lecture where the participative groups´ attitude and the development of oral presentations dissolve the traditional boundaries regarding public communication skills of the students in the Degree.

The New Silk Road: a versatile instrument in China’s policy. OSW Commentary No. 161, February 10 2015

Introduction. The Chinese leader Xi Jinping presented the concept of the New Silk Road – a collection of land and maritime routes – in autumn 2013. Initially, it envisaged the creation of a network of infrastructural connections, mainly transport corridors, between China and its most important economic partner – Europe. The concept grew in importance throughout 2014 to become the key instrument of China’s foreign policy, especially in the areas of public diplomacy and soft power. Towards the end of 2014, the Chinese government announced it would establish a Silk Road Fund worth US$40 billion. The New Silk Road idea is a flexible formula used by China in its dialogue with many other countries. Its inclusive nature helps contribute to diluting the negative impression caused by China’s rapid economic expansion and assertiveness in foreign policy, especially with regard to its neighbours. The process of implementing the New Silk Road concept will allow China to expand its influence within its neighbourhood: in Central and South-Eastern Asia. The New Silk Road will be an alternative point of reference to the US dominance and Russian integration projects in these regions. The concept will legitimise and facilitate the growth of China’s influence in the transit countries on the route to Western Europe, i.e. in the Middle East (Arab countries, Israel and Turkey, the Horn of Africa and Central Europe (the Balkans and the Visegrad Group countries). This concept is also essential for China’s domestic policy. It has become one of Xi Jinping’s main political projects. It will boost the development of China’s central and western provinces. The fact that the concept is open and not fully defined means that it will be a success regardless of the extent to which it will be implemented in practice. Its flexible nature allows China to continue investments already initiated bilaterally and to present them as components of the New Silk Road concept.

The South Caucasus - Between integration and fragmentation

The South Caucasus is situated at the intersection of Eurasia’s major transport and energy corridors, making it an important geostrategic region. Traditional regional actors Iran, Turkey and Russia have jostled for influence and power in the region for centuries, and are now faced with competition from the EU, China, the US and NATO. Although Armenia, Azerbaijan and Georgia have been independent for more than two decades, they still continue to feel the sway, and sometimes threat, of external actors. As a response, the three South Caucasus states have chosen very different geostrategic paths since the collapse of the Soviet Union, leaving the region more fragmented and volatile than ever. In this book, various authors offer a deep and broad understanding of the developments in the South Caucasus, analyse the different foreign trajectories that each of the three state is following, and highlight the impact of external actors’ policies.

2016 already puts its mark on the economic map of Europe. CEPS Essay No. 22/8 January 2016

The start of 2016 brought highly symbolic changes to the trade policy map of Europe between the EU- and Russian-led blocs, as the EU’s Deep and Comprehensive Free Trade Area (DCFTA) with Ukraine entered into force provisionally, while Russia moved in precisely the opposite direction by scrapping its free trade agreement with Ukraine. However the ongoing changes go far wider and deeper. The energy sector and major industries see disengagement between Ukraine and Russia, and Russia’s share in Ukrainian trade is falling substantially. New transport corridors with China may offer synergies with trade opportunities for all three DCFTA states, with Georgia first in line. Visa liberalisation for the entire DCFTA space is now firmly in prospect. Divergent macroeconomic trends between a recovering eurozone and recession in Russia will accentuate the changes in trade structures. A better organisation of the pan-European economic space is surely desirable, but prospects for links between the EU and the Eurasian Economic Union remain problematic.

Modulated entry /

"The technique of modulation, or variable coefficients, is discussed and the analytical formulation is reviewed. Representative numerical results of the use of modulation are shown for the lifting and nonlifting cases. These results include the effects of modulation on peak acceleration, entry corridor, and heat absorption. Results are given for entry at satellite speed and escape speed. The indications are that coefficient modulation on a vehicle with good lifting capability offers the possibility of sizable loading reductions or, alternatively, wider corridors; thus, steep entries become practical from the loading standpoint. The amount of steepness depends on the acceptable heating penalty. The price of sizable fractions of the possible gains does not appear to be excessive."

Institute of Science and Technology

On the North Camous of the Univeristy of Michigan at Ann Arbor, consists of three structures; a central office building, a laboratory unit and a high bay laboratory facility connected by underground corridors.

Oregon wilderness : environmental impact statement : draft /

Includes index.

Two NextGen Air Safety Tools: An ADS-B Equipped UAV and a Wake Turbulence Estimator

Thesis (Master's)--University of Washington, 2016-06