Timing of Capacity Change: Models for Capital Intensive Industry

The suitable timing of capacity investments is a remarkable issue especially in capital intensive industries. Despite its importance, fairly few studies have been published on the topic. In the present study models for the timing of capacity change in capital intensive industry are developed. The study considers mainly the optimal timing of single capacity changes. The review of earlier research describes connections between cost, capacity and timing literature, and empirical examples are used to describe the starting point of the study and to test the developed models. The study includes four models, which describe the timing question from different perspectives. The first model, which minimizes unit costs, has been built for capacity expansion and replacement situations. It is shown that the optimal timing of an investment can be presented with the capacity and cost advantage ratios. After the unit cost minimization model the view is extended to the direction of profit maximization. The second model states that early investments are preferable if the change of fixed costs is small compared to the change of the contribution margin. The third model is a numerical discounted cash flow model, which emphasizes the roles of start-up time, capacity utilization rate and value of waiting as drivers of the profitable timing of a project. The last model expands the view from project level to company level and connects the flexibility of assets and cost structures to the timing problem. The main results of the research are the solutions of the models and analysis or simulations done with the models. The relevance and applicability of the results are verified by evaluating the logic of the models and by numerical cases.

Institutional legacies, employment and professional integration of non EU/EEA doctors in France

Internationally, policies for attracting highly-skilled migrants have become the guidelines mainly used by the Organisation for Economic Co-operation and Development (OECD) countries. Governments are implementing specific procedures to capture and facilitate their mobility. However, all professions are not equal when it comes to welcoming highly-skilled migrants. The medical profession, as a protective market, is one of these. Taking the case of non-EU/EEA doctors in France, this paper shows that the medical profession defined as the closed labour market, remains the most controversial in terms of professional integration of migrants, protectionist barriers to migrant competition and challenge of medical shortage. Based on the path-dependency approach, this paper argues that non-EU/EEA doctors' issues in France derive from a complex historical process of interaction between standards settled in the past, particularly the historical power of medical corporatism, the unexpected long-term effects of French hospital reforms of 1958, and budgetary pressures. Theoretically, this paper shows two significant findings. Firstly, the French medical system has undergone a series of transformations unthinkable in the strict sense of a path-dependence approach: an opening of the medical profession to foreign physicians in the context of the Europeanisation of public policy, acceptance of non-EU/EEA doctors in a context of medical shortage and budgetary pressures. Secondly, there is no change of the overall paradigm: significantly, the recruitment policies of non-EU/EEA doctors continue to highlight the imprint of the past and reveal a significant persistence of prejudices. Non-EU/EEA doctors are not considered legitimate doctors even if they have the qualifications of physicians which are legitimate in their country and which can be recognised in other receiving countries.

A comparative study of the change in diatom inferred ph of a staircase of lakes in the Algoma District, Northern Ontario /

Four staircase lakes occupying a single watershed located in the Algoma District, north of Lake Superior were chosen for this study. I examined the subfossil diatom assemblage in the top twenty centimeters of the surface sediments in each of these four lakes in an attempt to reconstruct their respective past pH history. From these analyses it was possible to test the hypothesis that the rate of change of diatom inferred pH was not significantly different in lakes located one below the other in a single "staircase" within a single watershed system. My results indicated that the four Z lakes had been acid for at least the last century. The water color of the three upper Z lakes (Z1, Z2 and Z3) was brown (>30 Pt Co units). The bottom lake (Z4) was the only clear water lake in the system «5 Pt Co units). This bottom staircase lake had no muskeg development around its shoreline. The alkaliphilous diatoms in the Z watershed system were important in determining the diatom inferred pH of the four Z lakes. The centric diatoms were extremely rare in the clearwater bottom lake (Z4). The ecology of the Eupodiscales is perhaps important in the interpretation of sediment in the more acid environment. Lake Z4 was the only one that had a progressive as well as a significant decrease in its downcore diatom inferred pH since the early 1960's. This lead me to speculate that the humic substances present in the upper three brown water lakes (Z1, Z2 and Z3) were perhaps Important in buffering them against a further decrease in water pH even though they were located within an area which was sensitive to acid precipitation.

The Impact of a Corporate Name Change on Stock Price and Trading Volume of Canadian Companies

This thesis examines the impact of a corporate name change on stock price and trading volume of Canadian companies around the announcement date, the approval date, and the adoption date over the time period from 1997 to 2011. Name changes are classified into six categories: major and minor, structural and pure, diversified and focused, accompanied with a change in ticker symbol and without a change in ticker symbol, “Gold” name addition and deletion, and different reasons for name changes (e.g., merger and acquisition, change of structure, change of strategy, and better image). The thesis uses the standard event study methodology to perform abnormal return and trading volume analyses. In addition, regression analysis is employed to examine which type of a name change has the largest impact on cumulative abnormal returns. Sample stocks exhibit a significant positive abnormal return one-day prior to the approval day and one day after the adoption date. Around the approval date we observe significant abnormal returns for stocks with a structural name change. On the day after the adoption date we document abnormal returns for stocks with major, minor, structural, pure, focused, and ticker symbol name changes. If a merger or acquisition is the reason for a name change, companies tend to experience a significant positive abnormal return one-day before the approval date and on the adoption date. If a change of structure is the reason for a name change, companies exhibit a significant positive abnormal return on the approval date and a significant negative abnormal return on the adoption date. In case of a change of strategy as the reason for a name change, companies show a significant negative abnormal return around the approval date and a significant positive abnormal return around the adoption date.

Technical instruments and conceptual definitions: theoretical and practical implications of the change on the definition of unemployment in Colombia

En junio de 2000 el Departamento Nacional de Estadística de Colombia adopto una nueva definición de medición de desempleo siguiendo los estándares sugeridos por la organización Internacional del Trabajo (OIT). El cambio de definición implico una reducción de la tasa de desempleo en cerca de dos puntos porcentuales. En este documento contrastamos la experiencia colombiana con otra experiencias internacionales, y analizamos las implicaciones empíricas y teóricas de este cambio de definición usando dos tipos de estimaciones cuantitativas: en la primera se contrasta las principales características de las diferentes categorías clasificadas según la definición nueva y vieja de desempleo (empleado, desempleado y fuera de la fuerza laboral) usando el algoritmo EM; en la segunda se pone a prueba la implicación del desempleo estructural y su relación con el perfil educacional de personas desempleadas y las características teóricas que enfrentan los estándares de la OIT en la definición de empleo.

Exploring behavioural change through an agent-oriented system dynamics model: the use of personal protective equipment among pesticide applicators in Colombia

The misuse of Personal Protective Equipment results in health risk among smallholders in developing countries, and education is often proposed to promote safer practices. However, evidence point to limited effects of education. This paper presents a System Dynamics model which allows the identification of risk-minimizing policies for behavioural change. The model is based on the IAC framework and survey data. It represents farmers' decision-making from an agent-oriented standpoint. The most successful intervention strategy was the one which intervened in the long term, targeted key stocks in the systems and was diversified. However, the results suggest that, under these conditions, no policy is able to trigger a self sustaining behavioural change. Two implementation approaches were suggested by experts. One, based on constant social control, corresponds to a change of the current model's parameters. The other, based on participation, would lead farmers to new thinking, i.e. changes in their decision-making structure.

Change detection evokes a Simon-like effect

A change detection paradigm was used to estimate the role of explicit change detection in the generation of the irrelevant spatial stimulus coding underlying the Simon effect. In one condition, no blank was interposed between two successive displays, which produced efficient change detection. In another condition, the presence of a blank frame produced a robust change blindness effect, which is crucially assumed to occur as the consequence of impaired attentional orienting to the change location. The results showed a strong Simon-like effect under conditions of efficient change detection. By contrast, no Simon-like effect was observed under conditions of change blindness, namely when attention shifting towards the change location was hampered. Experiment 2 supported this pattern by showing that a Simon-like effect could be observed when the blank was present, but only when participants detected the change by means of a cue that was informative as to change location. Overall, our findings show that a Simon-like effect can only be observed under conditions of explicit change detection, likely because a shift of attention towards the change location has occurred.

The benefits of a compute cluster approach to high spatial resolution biodiversity richness modelling: projecting the impact of climate change on Mediterranean flora

High spatial resolution environmental data gives us a better understanding of the environmental factors affecting plant distributions at fine spatial scales. However, large environmental datasets dramatically increase compute times and output species model size stimulating the need for an alternative computing solution. Cluster computing offers such a solution, by allowing both multiple plant species Environmental Niche Models (ENMs) and individual tiles of high spatial resolution models to be computed concurrently on the same compute cluster. We apply our methodology to a case study of 4,209 species of Mediterranean flora (around 17% of species believed present in the biome). We demonstrate a 16 times speed-up of ENM computation time when 16 CPUs were used on the compute cluster. Our custom Java ‘Merge’ and ‘Downsize’ programs reduce ENM output files sizes by 94%. The median 0.98 test AUC score of species ENMs is aided by various species occurrence data filtering techniques. Finally, by calculating the percentage change of individual grid cell values, we map the projected percentages of plant species vulnerable to climate change in the Mediterranean region between 1950–2000 and 2020.

A method for incorporating climate variability in climate change impact assessments: sensitivity of river flows in the Eden catchment to precipitation scenarios

Interest in the impacts of climate change is ever increasing. This is particularly true of the water sector where understanding potential changes in the occurrence of both floods and droughts is important for strategic planning. Climate variability has been shown to have a significant impact on UK climate and accounting for this in future climate cahgne projections is essential to fully anticipate potential future impacts. In this paper a new resampling methodology is developed which includes the variability of both baseline and future precipitation. The resampling methodology is applied to 13 CMIP3 climate models for the 2080s, resulting in an ensemble of monthly precipitation change factors. The change factors are applied to the Eden catchment in eastern Scotland with analysis undertaken for the sensitivity of future river flows to the changes in precipitation. Climate variability is shown to influence the magnitude and direction of change of both precipitation and in turn river flow, which are not apparent without the use of the resampling methodology. The transformation of precipitation changes to river flow changes display a degree of non-linearity due to the catchment's role in buffering the response. The resampling methodology developed in this paper provides a new technique for creating climate change scenarios which incorporate the important issue of climate variability.

A Possible Change in Mass Balance of Greenland and Antarctic Ice Sheets in the Coming Century

A high-resolution GCM is found to simulate precipitation and surface energy balance of high latitudes with high accuracy. This opens new possibilities to investigate the future mass balance of polar glaciers and its effect on sea level. The surface mass balance of the Greenland and the Antarctic ice sheets is simulated using the ECHAM3 GCM with TI06 horizontal resolution. With this model, two 5-year integrations for the present and doubled carbon dioxide conditions based on the boundary conditions provided by the ECHAM1/T21 transient experiment have been conducted. A comparison of the two experiments over Greenland and Antarctica shows to what extent the effect of climate change on the mass balance on the two largest glaciers of the world can differ. On Greenland one sees a slight decrease in accumulation and a substantial increase in melt, while on Antarctica a large increase in accumulation without melt is projected. Translating the mass balances into terms of sea-level equivalent. the Greenland discharge causes a sea level rise of 1.1 mm yr−1, while the accumulation on Antarctica tends to lower it by 0.9 mm yr−1. The change in the combined mass balance of the two continents is almost zero. The sea level change of the next century can be affected more effectively by the thermal expansion of seawater and the mass balance of smaller glaciers outside of Greenland and Antarctica.

The role of rules-based compliance systems in the new EU regulatory landscape: perspectives of institutional change and agency

The financial crisis of 2007-2009 and the subsequent reaction of the G20 have created a new global regulatory landscape. Within the EU, change of regulatory institutions is ongoing. The research objective of this study is to understand how institutional changes to the EU regulatory landscape may affect corresponding institutionalized operational practices within financial organizations and to understand the role of agency within this process. Our motivation is to provide insight into these changes from an operational management perspective, as well as to test Thelen and Mahoney?s (2010) modes of institutional change. Consequently, the study researched implementations of an Investment Management System with a rules-based compliance module within financial organizations. The research consulted compliance and risk managers, as well as systems experts. The study suggests that prescriptive regulations are likely to create isomorphic configurations of rules-based compliance systems, which consequently will enable the institutionalization of associated compliance practices. The study reveals the ability of some agents within financial organizations to control the impact of regulatory institutions, not directly, but through the systems and processes they adopt to meet requirements. Furthermore, the research highlights the boundaries and relationships between each mode of change as future avenues of research.

Flood inundation dynamics and socioeconomic vulnerability under environmental change

Floods are a major threat to human existence and historically have both caused the collapse of civilizations and forced the emergence of new cultures. The physical processes of flooding are complex. Increased population, climate variability, change in catchment and channel management, modified landuse and land cover, and natural change of floodplains and river channels all lead to changes in flood dynamics, and as a direct or indirect consequence, social welfare of humans. Section 5.16.1 explores the risks and benefits brought about by floods and reviews the responses of floods and floodplains to climate and landuse change. Section 5.08.2 reviews the existing modeling tools, and the top–down and bottom–up modeling frameworks that are used to assess impacts on future floods. Section 5.08.3 discusses changing flood risk and socioeconomic vulnerability based on current trends in emerging or developing countries and presents an alternative paradigm as a pathway to resilience. Section 5.08.4 concludes the chapter by stating a portfolio of integrated concepts, measures, and avant-garde thinking that would be required to sustainably manage future flood risk.

Towards a framework for managing IT-enabled change, sourcing and governance

In the resource-based view, organisations are represented by the sum of their physical, human and organisational assets, resources and capabilities. Operational capabilities maintain the status quo and allow an organisation to execute their existing business. Dynamic capabilities, otherwise, allow an organisation to change this status quo including a change of the operational ones. Competitive advantage, in this context, is an effect of continuously developing and reconfiguring these firm-specific assets through dynamic capabilities. Deciding where and how to source the core operational capabilities is a key success factor. Furthermore, developing its dynamic capabilities allows an organisation to effectively manage change its operational capabilities. Many organisations are asserted to have a high dependency on - as well as a high benefit from - the use of information technology (IT), making it a crucial and overarching resource. Furthermore, the IT function is assigned the role as a change enabler and so IT sourcing affects the capability of managing business change. IT sourcing means that organisations need to decide how to source their IT capabilities. Outsourcing of parts of the IT function will also outsource some of the IT capabilities and therefore some of the business capabilities. As a result, IT sourcing has an impact on the organisation's capabilities and consequently on the business success. And finally, a turbulent and fast moving business environment challenges organisations to effectively and efficiently managing business change. Our research builds on the existing theory of dynamic and operational capabilities by considering the interdependencies between the dynamic capabilities of business change and IT sourcing. Further it examines the decision-making oversight of these areas as implemented through IT governance. We introduce a new conceptual framework derived from the existing theory and extended through an illustrative case study conducted in a German bank. Under a philosophical paradigm of constructivism, we collected data from eight semi-structured interviews and used additional sources of evidence in form of annual accounts, strategy papers and IT benchmark reports. We applied an Interpretative Phenomenological Analysis (IPA), which emerged the superordinate themes for our tentative capabilities framework. An understanding of these interdependencies enables scholars and professionals to improve business success through effectively managing business change and evaluating the impact of IT sourcing decisions on the organisation's operational and dynamic capabilities.

A Framework supporting collaboration on the distributed design of integrated systems

The work described in this thesis aims to support the distributed design of integrated systems and considers specifically the need for collaborative interaction among designers. Particular emphasis was given to issues which were only marginally considered in previous approaches, such as the abstraction of the distribution of design automation resources over the network, the possibility of both synchronous and asynchronous interaction among designers and the support for extensible design data models. Such issues demand a rather complex software infrastructure, as possible solutions must encompass a wide range of software modules: from user interfaces to middleware to databases. To build such structure, several engineering techniques were employed and some original solutions were devised. The core of the proposed solution is based in the joint application of two homonymic technologies: CAD Frameworks and object-oriented frameworks. The former concept was coined in the late 80's within the electronic design automation community and comprehends a layered software environment which aims to support CAD tool developers, CAD administrators/integrators and designers. The latter, developed during the last decade by the software engineering community, is a software architecture model to build extensible and reusable object-oriented software subsystems. In this work, we proposed to create an object-oriented framework which includes extensible sets of design data primitives and design tool building blocks. Such object-oriented framework is included within a CAD Framework, where it plays important roles on typical CAD Framework services such as design data representation and management, versioning, user interfaces, design management and tool integration. The implemented CAD Framework - named Cave2 - followed the classical layered architecture presented by Barnes, Harrison, Newton and Spickelmier, but the possibilities granted by the use of the object-oriented framework foundations allowed a series of improvements which were not available in previous approaches: - object-oriented frameworks are extensible by design, thus this should be also true regarding the implemented sets of design data primitives and design tool building blocks. This means that both the design representation model and the software modules dealing with it can be upgraded or adapted to a particular design methodology, and that such extensions and adaptations will still inherit the architectural and functional aspects implemented in the object-oriented framework foundation; - the design semantics and the design visualization are both part of the object-oriented framework, but in clearly separated models. This allows for different visualization strategies for a given design data set, which gives collaborating parties the flexibility to choose individual visualization settings; - the control of the consistency between semantics and visualization - a particularly important issue in a design environment with multiple views of a single design - is also included in the foundations of the object-oriented framework. Such mechanism is generic enough to be also used by further extensions of the design data model, as it is based on the inversion of control between view and semantics. The view receives the user input and propagates such event to the semantic model, which evaluates if a state change is possible. If positive, it triggers the change of state of both semantics and view. Our approach took advantage of such inversion of control and included an layer between semantics and view to take into account the possibility of multi-view consistency; - to optimize the consistency control mechanism between views and semantics, we propose an event-based approach that captures each discrete interaction of a designer with his/her respective design views. The information about each interaction is encapsulated inside an event object, which may be propagated to the design semantics - and thus to other possible views - according to the consistency policy which is being used. Furthermore, the use of event pools allows for a late synchronization between view and semantics in case of unavailability of a network connection between them; - the use of proxy objects raised significantly the abstraction of the integration of design automation resources, as either remote or local tools and services are accessed through method calls in a local object. The connection to remote tools and services using a look-up protocol also abstracted completely the network location of such resources, allowing for resource addition and removal during runtime; - the implemented CAD Framework is completely based on Java technology, so it relies on the Java Virtual Machine as the layer which grants the independence between the CAD Framework and the operating system. All such improvements contributed to a higher abstraction on the distribution of design automation resources and also introduced a new paradigm for the remote interaction between designers. The resulting CAD Framework is able to support fine-grained collaboration based on events, so every single design update performed by a designer can be propagated to the rest of the design team regardless of their location in the distributed environment. This can increase the group awareness and allow a richer transfer of experiences among them, improving significantly the collaboration potential when compared to previously proposed file-based or record-based approaches. Three different case studies were conducted to validate the proposed approach, each one focusing one a subset of the contributions of this thesis. The first one uses the proxy-based resource distribution architecture to implement a prototyping platform using reconfigurable hardware modules. The second one extends the foundations of the implemented object-oriented framework to support interface-based design. Such extensions - design representation primitives and tool blocks - are used to implement a design entry tool named IBlaDe, which allows the collaborative creation of functional and structural models of integrated systems. The third case study regards the possibility of integration of multimedia metadata to the design data model. Such possibility is explored in the frame of an online educational and training platform.

Homogeneity assessment of a station climate series (1933-2005) in the Metropolitan Area of São Paulo: instruments change and urbanization effects

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)