Influence of the abrasive particles size in the micro-abrasion wear tests of TiAlSiN thin coatings

Ball rotating micro-abrasion tribometers are commonly used to carry out wear tests on thin hard coatings. In these tests, different kinds of abrasives were used, as alumina (Al2O3), silicon carbide (SiC) or diamond. In each kind of abrasive, several particle sizes can be used. Some studies were developed in order to evaluate the influence of the abrasive particle shape in the micro-abrasion process. Nevertheless, the particle size was not well correlated with the material removed amount and wear mechanisms. In this work, slurry of SiC abrasive in distilled water was used, with three different particles size. Initial surface topography was accessed by atomic force microscopy (AFM). Coating hardness measurements were performed with a micro-hardness tester. In order to evaluate the wear behaviour, a TiAlSiN thin hard film was used. The micro-abrasion tests were carried out with some different durations. The abrasive effect of the SiC particles was observed by scanning electron microscopy (SEM) both in the films (hard material) as in the substrate (soft material), after coating perforation. Wear grooves and removed material rate were compared and discussed.

Trace metals in size-fractionated particulate matter in a Portuguese hospital: exposure risks assessment and comparisons with other countries

Hospitals are considered as a special and important type of indoor public place where air quality has significant impacts on potential health outcomes. Information on indoor air quality of these environments, concerning exposures to particulate matter (PM) and related toxicity, is limited though. This work aims to evaluate risks associated with inhalation exposure to ten toxic metals and chlorine (As, Ni, Cr, Cd, Pb, Mn, Se, Ba, Al, Si, and Cl) in coarse (PM2.5–10) and fine (PM2.5) particles in a Portuguese hospital in comparison with studies representative of other countries. Samples were collected during 1 month in one urban hospital; elemental PM characterization was determined by proton-induced X-ray emission. Noncarcinogenic and carcinogenic risks were assessed according to the methodology provided by the United States Environmental Protection Agency (USEPA; Region III Risk-Based Concentration Table) for three different age categories of hospital personnel (adults, >20, and <65 years) and patients (considering nine different age groups, i.e., children of 1–3 years to seniors of >65 years). The estimated noncarcinogenic risks due to occupational inhalation exposure to PM2.5-bound metals ranged from 5.88×10−6 for Se (adults, 55–64 years) to 9.35×10−1 for As (adults, 20–24 years) with total noncarcinogenic risks (sum of all metals) above the safe level for all three age categories. As and Cl (the latter due to its high abundances) were the most important contributors (approximately 90 %) to noncarcinogenic risks. For PM2.5–10, noncarcinogenic risks of all metals were acceptable to all age groups. Concerning carcinogenic risks, for Ni and Pb, they were negligible (<1×10−6) in both PM fractions for all age groups of hospital personnel; potential risks were observed for As and Cr with values in PM2.5 exceeding (up to 62 and 5 times, respectively) USEPA guideline across all age groups; for PM2.5–10, increased excess risks of As and Cr were observed particularly for long-term exposures (adults, 55–64 years). Total carcinogenic risks highly (up to 67 times) exceeded the recommended level for all age groups, thus clearly showing that occupational exposure to metals in fine particles pose significant risks. If the extensive working hours of hospital medical staff were considered, the respective noncarcinogenic and carcinogenic risks were increased, the latter for PM2.5 exceeding the USEPA cumulative guideline of 10−4. For adult patients, the estimated noncarcinogenic and carcinogenic risks were approximately three times higher than for personnel, with particular concerns observed for children and adolescents.

NoC contention analysis using a branch-and-prune algorithm

“Many-core” systems based on a Network-on-Chip (NoC) architecture offer various opportunities in terms of performance and computing capabilities, but at the same time they pose many challenges for the deployment of real-time systems, which must fulfill specific timing requirements at runtime. It is therefore essential to identify, at design time, the parameters that have an impact on the execution time of the tasks deployed on these systems and the upper bounds on the other key parameters. The focus of this work is to determine an upper bound on the traversal time of a packet when it is transmitted over the NoC infrastructure. Towards this aim, we first identify and explore some limitations in the existing recursive-calculus-based approaches to compute the Worst-Case Traversal Time (WCTT) of a packet. Then, we extend the existing model by integrating the characteristics of the tasks that generate the packets. For this extended model, we propose an algorithm called “Branch and Prune” (BP). Our proposed method provides tighter and safe estimates than the existing recursive-calculus-based approaches. Finally, we introduce a more general approach, namely “Branch, Prune and Collapse” (BPC) which offers a configurable parameter that provides a flexible trade-off between the computational complexity and the tightness of the computed estimate. The recursive-calculus methods and BP present two special cases of BPC when a trade-off parameter is 1 or ∞, respectively. Through simulations, we analyze this trade-off, reason about the implications of certain choices, and also provide some case studies to observe the impact of task parameters on the WCTT estimates.

Size matters when we talk about corporate social responsibility: the case of portuguese companies

Social responsibility arises as a measure of the corporate policy that goes beyond the production activity, thus covering also the social and environmental activities. This issue has been gaining importance over time. The number of companies that are implementing socially responsible actions has been growing steadily even though it is still centered on large and medium sized companies. Social responsibility is an accessible theme to any company of any size, once the social and environmental issues are resolved through concrete actions, but in the small and micro-sized companies there are factors that inhibit such actions. Some of these factors are: reduced investment capacity; minimal expectations of medium to long term returns; or even the short-term management focus that is aimed at survival. Such facts can be verified in the case of Portuguese companies, where out of the 41 companies certified by SA 8000 only 5 are micro-sized or small and even these are linked to large organizations.

Innovation assessment of a Portuguese railway branch of a foreign multinational - a case study

Paper developed for the unit “Innovation Economics and Management” of the PhD programme in Technology Assessment at the Universidade Nova de Lisboa in 2009-10 under the supervision of Prof. Maria Luísa Ferreira

Innovation assessment in a local branch of a rail transport manufacture industry - A case study

Based on a poster submitted to CONCORD 2011 - Conference on Corporate R&D: The dynamics of Europe's industrial structure and the growth of innovative firms, Sevilla, IPTS, 6 Out. 2011, Seville, http://www.eventisimo.com/concord2011/recibido.html

A Real Time Vision System for Autonomous Systems: Characterization during a Middle Size Match

in RoboCup 2007: Robot Soccer World Cup XI

Design of the ISePorto robocup Middle-Size League Robotic Soccer Team: Control, Localisation and Coordination

Proceedings of the 10th Mediterranean Conference on Control and Automation - MED2002 Lisbon, Portugal, July 9-12, 2002

Utilization of Quality Tools: does sector and size matter?

This research focuses on the influence of company sector and size on the level of utilization of Basic and Advanced Quality Tools. The paper starts with a literature review and then presents the methodology used for the survey. Based on the responses from 202 managers of Portuguese ISO 9001:2008 Quality Management System certified organizations, statistical tests were performed. Results show, with 95% confidence level, that industry and services have a similar proportion of use of Basic and Advanced Quality Tools. Concerning size, bigger companies show a higher trend to use Advanced Quality Tools than smaller ones. For Basic Quality Tools, there was no statistical significant difference at a 95% confidence level for different company sizes. The three basic Quality tools with higher utilization were Check sheets, Flow charts and Histograms (for Services) or Control Charts/ (for Industry), however 22% of the surveyed organizations reported not using Basic Quality Tools, which highlights a major improvement opportunity for these companies. Additional studies addressing motivations, benefits and barriers for Quality Tools application should be undertaken for further validation and understanding of these results.

Comprehensive treatments for social cognitive deficits in schizophrenia: A critical review and effect-size analysis of controlled studies

Recent advances in psychosocial treatments for schizophrenia have targeted social cognitive deficits. A critical literature review and effect-size (ES) analysis was conducted to investigate the efficacy of comprehensive programs of social cognitive training in schizophrenia. Results revealed 16 controlled studies consisting of seven models of comprehensive treatment with only three of these treatment models investigated in more than one study. The effects of social cognitive training were reported in 11/15 studies that included facial affect recognition skills (ES=.84) and 10/13 studies that included theory-of-mind (ES=.70) as outcomes. Less than half (4/9) of studies that measured attributional style as an outcome reported effects of treatment, but effect sizes across studies were significant (ESs=.30-.52). The effect sizes for symptoms were modest, but, with the exception of positive symptoms, significant (ESs=.32-.40). The majority of trials were randomized (13/16), selected active control conditions (11/16) and included at least 30 participants (12/16). Concerns for this area of research include the absence of blinded outcome raters in more than 50% of trials and low rates of utilization of procedures for maintaining treatment fidelity. These findings provide preliminary support for the broader use of comprehensive social cognitive training procedures as a psychosocial intervention for schizophrenia.

Cournot model with investments to change the market size

We present a new deterministic dynamical model on the market size of Cournot competitions, based on Nash equilibria of R&D investment strategies to increase the size of the market of the firms at every period of the game. We compute the unique Nash equilibrium for the second subgame and the profit functions for both firms. Adding uncertainty to the R&D investment strategies, we get a new stochastic dynamical model and we analyse the importance of the uncertainty to reverse the initial advantage of one firm with respect to the other.

A simplified four-branch model for the analytical study of the out-of-plane performance of regular stone URM walls

During the last years, several studies have been made aiming to assess the out-of-plane seismic response of unreinforced stone masonry structures. This fact led to the development of a wide variety of models and approaches, ranging from simple kinematic based analytical models up to complex numerical simulations. Nevertheless, for the sake of simplicity, the out-of-plane seismic response of a masonry wall pier may be obtained by means of a simple single-degree-of-freedom system while still providing good results. In fact, despite the assumptions associated with such a simple formulation, it is also true that the epistemic uncertainty inherent with the selection of appropriate input parameters in more complex models may render them truly ineffective. In this framework, this paper focuses on the study of the out-of-plane bending of unreinforced stone masonry walls (cantilevers) by proposing a simplified analytical approach based on the construction of a linearized four-branch model, which is used to characterize the linear and nonlinear response of such structural elements through an overturning moment-rotation relationship. The formulation of the four-branch model is presented and described in detail and the meaningful parameters used for its construction are obtained from a set of experimental laboratory tests performed on six full-scale unreinforced regular sacco stone masonry specimens. Moreover, a parametric analysis aiming to evaluate the effect of these parameters’ variation on the final configuration of the model is presented and critically discussed. Finally, the results obtained from the application of the developed four-branch model on real unreinforced regular sacco stone masonry walls are thoroughly analysed and the main conclusions obtained from its application are summarized.

Software EarMaster como ferramenta pedagógica na disciplina de Formação Musical

O presente relatório de estágio mostra-nos um percurso realizado no ano letivo 2014/2015, referente à Prática de Ensino Supervisionada no âmbito do Mestrado em Ensino de Música, ramo de Formação Musical. O mesmo não reflete única e exclusivamente a Prática de Ensino Supervisionada do ano transato mas sim, todo um percurso académico realizado em que foram efetuadas reflexões, tomadas decisões, criadas novas ideias pedagógicas, que num todo foi essencial para uma melhoria da prática pedagógica como também na construção de um ser mais crítico e investigativo. Este documento é composto por duas partes. Na primeira parte é apresentado o capítulo I e II, sendo o primeiro uma abordagem à instituição de ensino em que foi realizada a prática de ensino supervisionada, e o segundo, uma reflexão aprofundada da mesma. A segunda parte do relatório prende-se a um Projeto de Investigação realizado no decorrer do ano letivo 2014/2015, direcionado para as Novas Tecnologias de Informação e Comunicação na Educação em geral e na Educação no Ensino Vocacional da Música mais especificamente, “O software EarMaster como ferramenta pedagógica na disciplina de Formação Musical”, tentando perceber se este tipo de software informáticos poderão ser uma mais-valia para o estudo da disciplina da Formação Musical e se trará melhores resultados para o aluno aquando da sua utilização. A metodologia utilizada no projeto de investigação prende-se a uma lógica quantitativa e qualitativa. O estudo não é, de todo, conclusivo devido ao tamanho da amostra obtida, tendo alguns alunos optado por não utilizar o software EarMaster, formando assim um pequeno grupo de amostra não suficiente para obter os melhores resultados, ficando em aberto possíveis investigações sobre esta temática. Serão, as Novas Tecnologias de Informação uma mais-valia para a Educação no nosso país? Será possível a utilização destas na sala de aula, sem que sejam pensadas como algo para “entreter” o aluno por momentos?

PATHOGENICITY OF Blastocystis sp. TO THE GASTROINTESTINAL TRACT OF MICE: RELATIONSHIP BETWEEN INOCULUM SIZE AND PERIOD OF INFECTION

The pathogenic potential of Blastocystis sp. in experimental models requires further investigation. In this work, the pathogenicity of this parasite in the gastrointestinal tract of male Swiss mice was evaluated according to the inoculum size and period of infection. Animals were infected intragastrically, with 100, 500, 1,000, 5,000 and 10,000 Blastocystis sp. vacuolar forms obtained from a mixture of eight human isolates cultured axenically in Jones' medium. After seven, 14, 21, 28 and 60 days of infection, the animals were sacrificed and fragments of the small intestine (duodenum), large intestine, and cecum were subjected to histopathological analysis. Blastocystis sp. triggered an inflammatory response in the different tissues analyzed, with a predominance of mononuclear cells. The parasite was found in the muscular layer of the cecum, showing its invasive character. Larger inocula triggered inflammatory processes earlier (seven days) than smaller ones (from 21 days). We conclude that, in the proposed model, the pathogenicity of Blastocystis sp. isolates that were studied is related to inoculum size and period of infection.