Polyacid-modified composite resins ("compomers") and their use in clinical dentistry

OBJECTIVES: This paper describes the chemistry and properties of polyacid-modified composite resins ("compomers") designed for use in clinical dentistry, and reviews the literature in this area. METHODS: Information has been obtained from over 50 published articles appearing in the dental and biomaterials literature, with studies being principally identified through MedLine. RESULTS: Published work shows that polyacid-modified composite resins constitute a discrete class of polymeric repair material for use in dentistry. Their distinction is that they contain hydrophilic components, and these cause water to be drawn into the material following cure. This triggers an acid-base reaction, and gives the materials certain clinically-desirable properties (fluoride release, buffering capability) that are also associated with glass-ionomer cements. The water uptake leads to a decline in certain, though not all, physical properties. However, clinical studies have shown these materials to perform acceptably in a variety of applications (Class I, Class II and Class V cavities, as fissure sealants and as orthodontic band cements), especially in children's teeth. CONCLUSIONS/SIGNIFICANCE: Polyacid-modified composite resins constitute a versatile class of dental repair material, whose bioactivity confers clinical advantages, and which are particularly useful in children's dentistry.

Severe tissue damage in Atlantic cod larvae under increasing ocean acidification

Ocean acidification, caused by increasing atmospheric concentrations of CO2 (refs 1-3), is one of the most critical anthropogenic threats to marine life. Changes in seawater carbonate chemistry have the potential to disturb calcification, acid-base regulation, blood circulation and respiration, as well as the nervous system of marine organisms, leading to long-term effects such as reduced growth rates and reproduction(4,5). In teleost fishes, early life-history stages are particularly vulnerable as they lack specialized internal pH regulatory mechanisms(6,7). So far, impacts of relevant CO2 concentrations on larval fish have been found in behaviour(8,9) and otolith size(10,11), mainly in tropical, non-commercial species. Here we show detrimental effects of ocean acidification on the development of a mass-spawning fish species of high. commercial importance. We reared Atlantic cod larvae at three levels of CO2, (1) present day, (2) end of next century and (3) an extreme, coastal upwelling scenario, in a long-term (2; months) mesocosm experiment. Exposure to CO2 resulted in severe to lethal tissue damage in many internal organs, with the degree of damage increasing with CO2 concentration. As larval survival is the bottleneck to recruitment, ocean acidification has the potential to act as an additional source of natural mortality, affecting populations of already exploited fish stocks.

Living in warmer, more acidic oceans retards physiological recovery from tidal emersion in the velvet swimming crab, Necora puber

The distribution patterns of many species in the intertidal zone are partly determined by their ability to survive and recover from tidal emersion. During emersion, most crustaceans experience gill collapse, impairing gas exchange. Such collapse generates a state of hypoxemia and a hypercapnia-induced respiratory acidosis, leading to hyperlactaemia and metabolic acidosis. However, how such physiological responses to emersion are modified by prior exposure to elevated CO2 and temperature combinations, indicative of future climate change scenarios, is not known. We therefore investigated key physiological responses of velvet swimming crabs, Necora puber, kept for 14 days at one of four pCO(2)/temperature treatments (400 mu atm/10 degrees C, 1000 mu atm/10 degrees C, 400 mu atm/15 degrees C or 1000 mu atm/15 degrees C) to experimental emersion and recovery. Pre-exposure to elevated pCO(2) and temperature increased pre-emersion bicarbonate ion concentrations [HCO3-], increasing resistance to short periods of emersion (90 min). However, there was still a significant acidosis following 180 min emersion in all treatments. The recovery of extracellular acid-base via the removal of extracellular pCO(2) and lactate after emersion was significantly retarded by exposure to both elevated temperature and pCO(2). If elevated environmental pCO(2) and temperature lead to slower recovery after emersion, then some predominantly subtidal species that also inhabit the low to mid shore, such as N. puber, may have a reduced physiological capacity to retain their presence in the low intertidal zone, ultimately affecting their bathymetric range of distribution, as well as the structure and diversity of intertidal assemblages.

Reactivity of the 4d transition metals toward N hydrogenation and NH dissociation: A DFT-based HSAB analysis

The density functional theory (DFT) based hard-soft acid-base (HSAB) reactivity indices, including the electrophilicity index, have been successfully applied to many areas of molecular chemistry. In this work we test the applicability of such an approach to fundamental surface chemistry. We have considered, as prototypical surface reactions, both the hydrogenation of atomic nitrogen and the dissociative adsorption of the NH molecular radical. By use of a DFT methodology, the minimum energy reaction pathways, and corresponding reaction barriers, of the above reactions over Zr(001), Nb(110), Mo(110), Tc(001), Ru(001), Rh(111), and Pd(111) have been determined. By consideration of the chemical potential and chemical hardness of the surface metal atoms, and the principle of electronegativity equalization, it is found that the charge transferred to the NH radical during the process of dissociative adsorption correlates very well with that determined by Mulliken population analysis. Furthermore, it is found that the stability of the NH/surface transition state complex relates directly to this charge transfer and that the trend in transition state stability predicted by a HSAB; treatment correlates very strongly with that determined by DFT calculations. With regards to N hydrogenation, we find that during the course of the reaction, H loses cohesion to the surface, as it must migrate from a 3-fold hollow site to either a bridge or top site, to react with N. Partial density of states (PDOS) and Mulliken population analysis reveal that this loss of bonding is accompanied by charge transfer from H to the surface metal atoms. Moreover, by simple modeling, we show that the reaction barriers are directly proportional to this mandatory charge transfer. Indeed, it is found that the reaction barriers correlate very well with the electrophilicity index of the metal atoms.

Protic ionic liquids based on the dimeric and oligomeric anions: [(AcO)(x)Hx-1](-)

We describe a fluidity and conductivity study as a function of composition in N-methylpyrrolidine-acetic acid mixtures. The simple 1 : 1 acid-base mixture appears to form an ionic liquid, but its degree of ionicity is quite low and such liquids are better thought of as poorly dissociated mixtures of acid and base. The composition consisting of 3 moles acetic acid and 1 mole N-methylpyrrolidine is shown to form the highest ionicity mixture in this binary due to the presence of oligomeric anionic species [(AcO)(x)Hx-1](-) stabilised by hydrogen bonds. These oligomeric species, being weaker bases than the acetate anion, shift the proton transfer equilibrium towards formation of ionic species, thus generating a higher degree of ionicity than is present at the 1 : 1 composition. A Walden plot analysis, thermogravimetric behaviour and proton NMR data, as well as ab initio calculations of the oligomeric species, all support this conclusion.

Reactivity difference between protolytic forms of some macrocyclic chromium(III) complexes in ligand substitution and electron transfer processes

The review provides insight into the mechanism of ligand substitution and electron transfer (from chromium(III) to iron(III)) by comparison of the reactivity of some tetraazamacrocyclic chromium(III) complexes in the conjugate acid-base forms. Use of two geometrical isomers made possible to estimate the influence of geometry and protolytic reactions in trans and cis position towards the leaving group on the rate enhancement. Studies on the reaction rates in different media demonstrated the role played by outer sphere interactions in a monodentate ligand substitution. (C) 2009 Published by Elsevier B.V.

A greener, halide-free approach to ionic liquid synthesis

Conventionally, ionic liquids with anions generated from simple organic acids are prepared following a metathetic procedure from a halide salt, usually a chloride. Here, we describe an efficient means of generating hydroxide solutions of the cations of interest, allowing many ionic liquids to be produced by simple acid-base reactions, completely avoiding the use of halides.

Adsorption of aqueous metal ions on oxygen and nitrogen functionalized nanoporous activated carbons

In this study, the adsorption characteristics of two series of oxygen and nitrogen functionalized activated carbons were investigated. These series were a low nitrogen content(similar to 1 wt % daf) carbon series derived from coconut shell and a high nitrogen content (similar to 8 wt % daf) carbon series derived from polyacrylonitrile. In both series, the oxygen contents were varied over the range similar to 2-22 wt % daf. The porous structures of the functionalized activated carbons were characterized using N-2 (77 K) and CO2 (273 K) adsorption. Only minor changes in the porous structure were observed in both series. This allowed the effect of changes in functional group concentrations on metal ion adsorption to be studied without major influences due to differences in porous structure characteristics. The surface group characteristics were examined by Fourier transform infrared (FTIR) spectroscopy, acid/base titrations, and measurement of the point of zero charge (pH(PZC)). The adsorption of aqueous metal ion species, M2+(aq), on acidic oxygen functional group sites mainly involves an ion exchange mechanism. The ratios of protons displaced to the amount of M2+(aq) metal species adsorbed have a linear relationship for the carbons with pH(PZC) <= 4.15. Hydrolysis of metal species in solution may affect the adsorption of metal ion species and displacement of protons. In the case of basic carbons, both protons and metal ions are adsorbed on the carbons. The complex nature of competitive adsorption between the proton and metal ion species and the amphoteric character of carbon surfaces are discussed in relation to the mechanism of adsorption.

Competitive adsorption of aqueous metal ions on an oxidized nanoporous activated carbon\

Competitive adsorption is the usual situation in real applications, and it is of critical importance in determining the overall performance of an adsorbent. In this study, the competitive adsorption characteristics of all the combinations of binary mixtures of aqueous metal ion species Ca2+(aq), Cd2+(aq), Pb2+(aq), and Hg2+(aq) on a functionalized activated carbon were investigated. The porous structure of the functionalized active carbon was characterized using N-2 (77 K) and CO2 (273 K) adsorption. The surface group characteristics were examined by temperature-programmed desorption, Fourier transform infrared spectroscopy, Raman spectroscopy, acid/base titrations, and measurement of the point of zero charge (pH(PZC)). The adsorption of aqueous metal ion species M2+(aq), on acidic oxygen functional group sites mainly involves an ion exchange mechanism. The ratios of protons displaced to the amount of M2+(aq) metal species adsorbed have a linear relationship for both single-ion and binary mixtures of these species. Hydrolysis of metal species in solution may affect the adsorption, and this is the case for adsorption of Hg2+(aq) and Pb2+(aq). Competitive adsorption decreases the amounts of individual metal ions adsorbed, but the maximum amounts adsorbed still follow the order Hg2+(aq) > Pb2+(aq) > Cd2+(aq) > Ca2+(aq) obtained for single metal ion adsorption. The adsorption isotherms for single metal ion species were used to develop a model for competitive adsorption in binary mixtures, involving exchange of ions in solution with surface proton sites and adsorbed metal ions, with the species having different accessibilities to the porous structure. The model was validated against the experimental data.

Structure and thermal properties of salicylate-based-protic ionic liquids as new heat storage media. COSMO-RS structure characterization and modeling of heat capacities

During this research, we present a study on the thermal properties, such as the melting, cold crystallization, and glass transition temperatures as well as heat capacities from 293.15 K to 323.15 K of nine in-house synthesized protic ionic liquids based on the 3-(alkoxymethyl)-1H-imidazol-3-ium salicylate ([H-Im-C₁OC_n][Sal]) with n = 3–11. The 3D structures, surface charge distributions and COSMO volumes of all investigated ions are obtained by combining DFT calculations and the COSMO-RS methodology. The heat capacity data sets as a function of temperature of the 3-(alkoxymethyl)-1H-imidazol-3-ium salicylate are then predicted using the methodology originally proposed in the case of ionic liquids by Ge et al. 3-(Alkoxymethyl)-1H-imidazol-3-ium salicylate based ionic liquids present specific heat capacities higher in many cases than other ionic liquids that make them suitable as heat storage media and in heat transfer processes. It was found experimentally that the heat capacity increases linearly with increasing alkyl chain length of the alkoxymethyl group of 3-(alkoxymethyl)-1H-imidazol-3-ium salicylate as was expected and predicted using the Ge et al. method with an overall relative absolute deviation close to 3.2% for temperatures up to 323.15 K.

Small molecular logic systems can draw the outlines of objects via edge visualization

The recently-discovered ability of small logical molecules to recognize edges is exploited to achieve outline drawing from binary templates. Outlines of arbitrary curvature, several colours and thicknesses down to 1 mm are drawn in around 30 min or less by employing a common laboratory two-colour ultraviolet lamp. The outlines and the light dose-driven XOR logic with fluorescence output or ‘off-on-off’ action which is observed in the irradiated regions are modelled by combining foundational principles of photochemistry, acid-base neutralization and diffusion.

Estudo de receptores sintéticos no reconhecimento molecular de substratos aniónicos e iões metálicos

O trabalho descrito insere-se no âmbito da Química Supramolecular e consistiu no desenvolvimento de receptores artificiais, na forma protonada ou complexada, para o reconhecimento molecular de substratos aniónicos derivados de ácidos carboxílicos incluindo os herbicidas PMG2-, ATCP- e 2,4-D-. Foram investigadas duas séries de aniões, uma alifática (ox2-, mal2-, suc2-, glu2-, adip2-, cit3- e cta3-) e outra aromática (bzc-, naphc-, anthc-, pyrc-, ph2-, iph2-, tph2-, btc3-, dihyac2-, 4,4-dibzc2-, 3-nitrobzc- e 4-nitrobzc-). Foram sintetizados sete novos ligandos macrocíclicos simétricos constituídos por anéis aromáticos piridina ou fenantrolina ligados por cadeias de poliaminas saturadas. O comportamento ácido-base destes macrociclos foi investigado em solução aquosa e as constantes de protonação correspondentes determinadas por métodos potenciométricos e de RMN de 1H. As propriedades de complexação destes ligandos com os iões metálicos Ni2+, Cu2+, Zn2+, Cd2+ e Pb2+ foram também estudadas por métodos potenciométricos nas mesmas condições experimentais, tendo revelado que os macrociclos de dimensão média são capazes de acomodar um ou dois iões metálicos. O complexo dinuclear de Cu(II) derivado do macrociclo com dois grupos piridina foi utilizado como receptor de aniões carboxilato originando complexos ternários. Todos os complexos foram caracterizados em solução por espectroscopias de UV/vis/IVpróx e de RMN. As espécies paramagnéticas foram também caracterizadas por espectroscopia de RPE. A formação de espécies ternárias foi ainda investigada por espectrometria de massa ESI-MS e ESI-MS/MS. As estruturas cristalinas de alguns dos complexos foram determinadas por difracção de raios-X. As formas protonadas dos macrociclos foram utilizadas como receptores de uma grande variedade de aniões carboxilato. O reconhecimento molecular entre os receptores e os substratos aniónicos foi investigado em solução por métodos potenciométricos e de espectroscopia de RMN com determinação das constantes de associação. Os agregados supramoleculares foram caracterizados no estado sólido por difracção de raios-X. Finalmente as associações supramoleculares foram estudadas em solução por métodos de dinâmica molecular com determinação dos termos entrópicos e entálpicos das energias livres de ligação. Em resumo, nesta tese apresentam-se os resultados de estudos realizados com duas famílias de macrociclos: desde a síntese dos compostos, passando por estudos em solução e finalizando com simulação molecular. Este estudo sistemático através da conjugação de metodologias complementares permitiu caracterizar ao nível macroscópico e microscópico as associações moleculares.

Matéria húmica de sapal: variações estruturais e complexação com o cobre

No presente trabalho foram estudadas as variações na composição, estrutura e comportamento das substâncias húmicas sedimentares (SHS), promovidas pela presença de duas espécies de plantas da família Chenopodiacea, presentes nos sapais da Ria de Aveiro: a Halimione portulacoides e a Arthrocnemum fruticosum. Para além das variações espaciais horizontais, foram investigadas as variações ao longo de um perfil de profundidades. Desta forma, para além da camada superficial (0-10 cm) de sedimentos com diferentes espécies de plantas e sem plantas, também foram investigadas camadas de sedimentos intermédia (20-25 cm) e profunda (45-50 cm). Para a extracção das SHS recorreu-se a uma pequena modificação do método proposto pela International Humic Substances Society (IHSS) para extracção e purificação de substâncias húmicas de solos. As SH extraídas foram caracterizadas através dos métodos espectroscópicos de absorção no ultravioleta visível, de fluorescência molecular síncrona, de absorção no infravermelho com transformadas de Fourier (FTIR) e de RMN 13C em estado sólido. Estas técnicas de caracterização foram complementadas pela análise elementar e termogravimetria. Em algumas amostras, foram ainda determinados o conteúdo em alguns metais por ICP-AES e o conteúdo funcional ácido por titulações potenciométricas. Após exaustiva caracterização das amostras de AH, procedeu-se ao estudo da sua capacidade de complexação com o cobre, recorrendo a titulações monitorizadas por fluorescência molecular síncrona. Os resultados revelaram que a colonização de sedimentos por plantas vasculares superiores conduz a uma alteração profunda no ambiente sedimentar e que esta é reflectida na diagénese das substâncias húmicas sedimentares, tendo-se observado variações a uma pequena escala espacial. O estudo deste tipo de variações nunca tinha sido efectuado em trabalhos anteriores. Nos ácidos fúlvicos detectaram-se diferenças na composição e estrutura das amostras correspondentes às camadas superiores de sedimentos, reflectindo a presença de diferentes colonizações vegetais. Relativamente aos ácidos húmicos, foi possível classificá-los em dois tipos distintos. Os AH do tipo I correspondem aos sedimentos superficiais e intermédios dos locais com plantas. Neste tipo de AH verificou-se uma incorporação de polissacarídeos e estruturas peptídicas, em estados de humificação pouco desenvolvidos. Os AH do tipo II correspondem aos sedimentos mais profundos de todos os locais e aos intermédios do local sem plantas e caracterizam-se por um maior grau de humificação e polimerização, um maior conteúdo aromático e de estruturas conjugadas e um maior conteúdo de grupos carboxílicos. Essas diferenças estruturais conduzem a diferentes comportamentos ácido/base e de complexação com o cobre. Assim, os AH do tipo I, que apresentam sinais espectroscópicos mais baixos associados a grupos carboxílicos e fenólicos, têm menor conteúdo de grupos funcionais ácidos e menor capacidade de complexação com o cobre quando se consideram ligandos característicos de unidades aromáticas conjugadas. Relativamente aos valores de log K dos complexos de AHS com o cobre, as amostras representativas da camada superficial dos sedimentos com plantas apresentaram valores superiores aos das restantes amostras de AH estudadas, cujos valores de log K são similares entre si. Atendendo aos resultados de análise elementar e espectroscópica, este facto pode estar associado à presença de compostos de azoto não peptídicos. Quanto a outros ligandos para o cobre, nomeadamente os representativos de estruturas peptídicas contendo o aminoácido triptofano e estruturas aromáticas simples, não foi possível obter resultados conclusivos. Dado que os ácidos húmicos do tipo I demonstraram um maior conteúdo peptídico e menor conteúdo aromático, o estudo destes ligandos torna-se importante para compreender melhor o efeito da presença de plantas nos sedimentos de sapal sobre o comportamento dos ácidos húmicos sedimentares como ligandos para o cobre. Refere-se ainda que foram detectadas certas especificidades na variação das características do sedimento e das substâncias húmicas com a profundidade nos diferentes locais estudados que não podem ser explicadas meramente com a presença de material vegetal oriundo de diferentes espécies de plantas, requerendo um conhecimento mais aprofundado das comunidades bentónicas e do ambiente físico-químico do sedimento.

Aplicação de cortiça em dois tipos de reatores para tratamento de água

A qualidade da água degradou-se de forma relevante nas últimas décadas e os processos de sorção têm vindo a ser investigados como métodos promissores para o tratamento de águas contaminadas. Neste trabalho avaliou-se a capacidade de dois tipos de cortiça para a remoção de diversos contaminantes, em reatores de vaso fechado e de leito fixo. Os ensaios realizados em reatores de vaso fechado permitiram (i) avaliar o efeito do pH e da granulometria na eficiência dos sorventes na remoção de mercúrio e (ii) avaliar a afinidade dos sorventes para outros contaminantes, nomeadamente arsénio, cádmio, níquel e chumbo. Estruturalmente as duas cortiças estudadas aparentam ser semelhantes, com uma pequena diferença de comportamento ácido-base e não apresentam diferenças estatisticamente significativas na remoção de mercúrio. Os resultados obtidos permitiram constatar que o processo de remoção é independente do pH, tendo-se obtido percentagens de remoção da ordem dos 80% e de concentrações de mercúrio na cortiça na ordem dos 117 μg/g. As cortiças estudadas revelaram-se menos eficazes no tratamento de água com os restantes contaminantes, atingindo percentagens de remoção máximas de 0% para As, 11% para Cd, 35% para Ni e 69% para Pb. Os ensaios em leito fixo, mesmo sem terem sido otimizados, revelam que é possível obter uma eficácia de remoção de mercúrio superior a 90% nas primeiras 40 horas de trabalho, sendo a concentração de mercúrio no leito de 680 μg/g. Relativamente aos mecanismos de sorção, os resultados experimentais indicam que estes são possivelmente de natureza química e que as interações eletrostáticas têm pouca importância.

Études Structurales par Résonance Magnétique Nucléaire (RMN) du Site Actif du Ribozyme VS de Neurospora.

Nous étudions le ribozyme VS de Neurospora, en tant que système modèle, pour augmenter nos connaissances sur la relation entre la structure et la fonction chez les ARNs, ainsi que pour mieux comprendre le mécanisme de clivage de ce ribozyme. Il a été proposé précédemment que la boucle interne A730 dans la tige-boucle VI (SLVI) contient le site actif du ribozyme et lie un ou plusieurs ions métalliques qui pourraient participer au mécanisme réactionnel. Nous avons déterminé par spectroscopie RMN la structure de la tige-boucle SLVI contenant la boucle A730 afin d’éclaircir ce mécanisme. La structure obtenue est en accord avec les études biochimiques antérieures et présente un ou plusieurs sites de liaison au magnésium associé à la boucle interne. Suite à des études de cinétique et de mutagenèse, il a été proposé qu’une adénine localisée dans le site actif, A756, participe à la catalyse par acide/base générale. Des études de pH effectuées précédemment ont identifié un pKa catalytique (5.2-5.8) qui correspond probablement à l’équilibre de protonation du A756. À l’aide de méthodes utilisant le carbone-13, nous avons identifié un pKa modifié appartenant au A756, ce qui supporte le rôle de ce résidu dans la catalyse par acide/base générale. Les études structurales présentées ici aident donc à augmenter notre compréhension du mécanisme de clivage chez le ribozyme VS.