Preparação de filmes finos ferroelétricos de SrBi2'('TA IND.1-x''NB IND.x)ÍND.2 'O IND.9' puro e dopado com tungstênio, obtidos pelo método dos precursores poliméricos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ciência e tecnologia X empreendorismo: dialogos possíveis e necessários

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Estudo da síntese de zeólitas tipo A, X e sodalita empregando reatores vítreos: análise dos métodos dinâmico e estático de síntese a partir de caulim residual da Região Amazônica

Empresas beneficiadoras de caulim geram resíduo caulinítico que é armazenado em lagoas de sedimentação, e ocupam grandes áreas físicas. O´aproveitamento deste resíduo é um fator importante do ponto de vista econômico e ambiental. Aqui é apresentado um estudo da síntese de zeólitas A, X e sodalita utilizando como matéria-prima um resíduo de caulim da Região Amazônica. O resíduo foi pré-tratado para a eliminação de matéria orgânica, cominuído e ativado termicamente a 750 °C por 2 horas. Ensaios de pré-zeolitização foram realizados em várias frações granulométricas do caulim ativado (metacaulim) a fim de se determinar a granulometria de síntese. Após esta etapa, empregou-se comparativamente dois métodos hidrotermais de obtenção de zeólitas: dinâmico e estático. Para a mistura reacional, utilizou-se a relação SiO₂/Al₂O₃ de 2/1 e 3/1 para obtenção das zeólitas. Análises de caracterização por Difração de Raios-X (DRX), Microscopia Eletrônica de Varredura (MEV) e Espectrometria de Fluorescência de Raios-X (FRX) mostraram uma boa formação da fase zeolítica NaA para a razão 2/1, em ambos os métodos de síntese e sem envelhecimento da mistura, e boa formação da fase NaX para a razão 3/1, em síntese estática com envelhecimento de 12 horas. A fase sodalita foi obtida na mesma estequiometria da zeólita NaX, porém empregando síntese estática e sem envelhecimento.

Indução de morte celular por apoptose decorrente da irradiação com Raios-X: um ensaio com células mamárias humanas tumorais

Apoptosis is a form of programmed cell death selectively removes abnormal cells, and thus contributes to maintaining the balance of the dynamics of cell reproduction. Therefore the verification of the occurrence of apoptotic cell death after a pathological stimulus is crucial for the analysis of the maintenance of normal cell cycle of a given tissue or organ. In this experiment were used cells lines human mammary tumor MDAMB231, T47, MCF7, which were irradiated with X-rays at a dose of 5 Gy in a time interval of 15 seconds, and filtration of 1mm aluminum. Samples containing the cells were grown in a specific culture medium, containing fetal bovine serum and growth factor, and two samples were prepared with each of the cell lines, one to be irradiated, and another that has not been irradiated, which denoted by negative control of the irradiation. The primary goal of the experiment was to verify and compare the rates of apoptosis in each cell lines, in which were irradiated and that were not irradiated, using flow cytometry as a method for detecting apoptotic cell death in together with specific markers annexin V and propidium iodide. Data from the readings made by flow cytometry were analyzed and interpreted using the software WinMDI statistical graph. By comparing the indices relating to the readings of positive and negative for specific markers of apoptosis, based on differences in the statistical data presented lectures regarding the cellular irradiated and not irradiated, collude cells in question once... (Complete abstract click electronic access below)

O efeito da autocorrelação no desempenho dos gráficos de X e R e dos gráficos de X e S²

Control charts are very important tools in statistical quality control of industrial processes and its use started last century. Since its development, the charts have always been attributed to independent processes, i.e. without any correlation between samples. But nowadays, with the high level of automation in the industrial environment, it is noticeable the autocorrelation factor between samples. The main Xcharts used in monitoring quality characteristics represented by continuous variables are the mean (X ), amplitude (R) and variance (S²). Therefore, this work aims to analyze the performance of X and R charts and in of X and S² charts with different sample sizes (4 and 5) for monitoring autocorrelated processes. Through computer simulations using the Fortran software and the use of mathematical expressions was possible to obtain data and performance analysis of the detection power charts for independent observations and for autocorrelated observations according to the model AR (1). The results show that the effect of autocorrelation reduces the ability of monitoring the control charts and that, the greater this effect, the slower the chart becomes in misfits signaling

The study of cardiovascular risk in adolescents - ERICA: rationale, design and sample characteristics of a national survey examining cardiovascular risk factor profile in Brazilian adolescents

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

N=1 SUSY backgrounds with an AdS factor from non-Abelian T duality

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Factor V Arg306 → Thr (factor V Cambridge) and factor V Arg306 → Gly mutations in venous thrombotic disease

We investigated the prevalence of two reported mutations of the factor V gene (factor V Arg306 → Thr, or factor V Cambridge, and factor V Arg306 → Gly) in 104 relatively young patients with verified venous thrombosis and in 208 age-, sex- and race-matched controls, in order to establish whether the two mutations are associated with increased predisposition for venous thrombosis. PCR amplification followed by BstNI and MspI digestion was employed to determine the genotypes, and each mutation was confirmed by DNA sequencing. Among the controls, one individual was found to be heterozygous for the factor V Arg306 → Thr mutation and one heterozygous for the factor V Arg306 → Gly mutation; none of the patients carried either mutation. Our findings do not support factor V Cambridge and factor V Arg306 → Gly as risk factors for venous thrombosis.

Clareamento dentário x autoestima x autoimagem

Dental changes that compromise facial harmony can have serious consequences on the social image of the patient. Depending on the emotional significance for the individual it can change interpersonal relationships, causing profound changes in their patterns of self-acceptance and self-image, with profound effects on their self-esteem of the patient. The search for tooth whitening as cosmetic factor for a harmonic smile grew sharply in the last decade. Although the color of the tooth represents only one aspect in the set of determinants of facial harmony, it is a strong factor because it is quickly perceived. This study aims to report the clinical case of a patient with spots on their upper central incisors. For the patient these spots have compromised her smile, causing harm and discomfort in their everyday social and professional relationships.

Resgates e abandonos do passado na prática musical litúrgica católica no Brasil entre os pontificados de Pio X e Bento XVI (1903-2013)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

The influence of "C-factor" and light activation technique on polymerization contraction forces of resin composite

Objectives: This study evaluated the influence of the cavity configuration factor ("C-Factor") and light activation technique on polymerization contraction forces of a Bis-GMA-based composite resin (Charisma, Heraeus Kulzer). Material and Methods: Three different pairs of steel moving bases were connected to a universal testing machine (Emic DL 500): groups A and B - 2x2 mm (CF=0.33), groups C and D - 3x2 mm (CF=0.66), groups E and F - 6x2 mm (CF=1.5). After adjustment of the height between the pair of bases so that the resin had a volume of 12 mm(3) in all groups, the material was inserted and polymerized by two different methods: pulse delay (100 mW/cm(2) for 5 s, 40 s interval, 600 mW/cm(2) for 20 s) and continuous pulse (600 mW/cm(2) for 20 s). Each configuration was light cured with both techniques. Tensions generated during polymerization were recorded by 120 s. The values were expressed in curves (Force(N) x Time(s)) and averages compared by statistical analysis (ANOVA and Tukey's test, p<0.05). Results: For the 2x2 and 3x2 bases, with a reduced C-Factor, significant differences were found between the light curing methods. For 6x2 base, with high C-Factor, the light curing method did not influence the contraction forces of the composite resin. Conclusions: Pulse delay technique can determine less stress on tooth/restoration interface of adhesive restorations only when a reduced C-Factor is present.

Divertor map with freedom of geometry and safety factor profile

An explicit, area-preserving and integrable magnetic field line map for a single-null divertor tokamak is obtained using a trajectory integration method to represent equilibrium magnetic surfaces. The magnetic surfaces obtained from the map are capable of fitting different geometries with freely specified position of the X-point, by varying free model parameters. The safety factor profile of the map is independent of the geometric parameters and can also be chosen arbitrarily. The divertor integrable map is composed of a nonintegrable map that simulates the effect of external symmetry-breaking resonances, so as to generate a chaotic region near the separatrix passing through the X-point. The composed field line map is used to analyze escape patterns (the connection length distribution and magnetic footprints on the divertor plate) for two equilibrium configurations with different magnetic shear profiles at the plasma edge.

Previous Percutaneous Coronary Intervention as Risk Factor for Coronary Artery Bypass Grafting

Background: Percutaneous coronary intervention (PCI) has increased as the initial revascularization strategy in chronic coronary artery disease. Consequently, more patients undergoing coronary artery bypass grafting (CABG) have history of coronary stent. Objective: Evaluate the impact of previous PCI on in-hospital mortality after CABG in patients with multivessel coronary artery disease. Methods: Between May/2007 and June/2009, 1099 consecutive patients underwent CABG on cardiopulmonary bypass. Patients with no PCI (n=938, 85.3%) were compared with patients with previous PCI (n=161, 14.6%). Logistic regression models and propensity score matching analysis were used to assess the risk-adjusted impact of previous PCI on in-hospital mortality. Results: Both groups were similar, except for the fact that patients with previous PCI were more likely to have unstable angina (16.1% x 9.9%, p=0.019). In-hospital mortality after CABG was higher in patients with previous PCI (9.3% x 5.1%, p=0.034) and it was comparable with EuroSCORE and 2000 Bernstein-Parsonnet risk score. Using multivariate logistic regression analysis, previous PCI emerged as an independent predictor of postoperative in-hospital mortality (odds ratio 1.94, 95% CI 1.02-3.68, p=0.044) as strong as diabetes (odds ratio 1.86, 95% CI 1.07-3.24, p=0.028). After computed propensity score matching based on preoperative risk factors, in-hospital mortality remained higher among patients with previous PCI (odds ratio 3.46, 95% CI 1.10-10.93, p=0.034). Conclusions: Previous PCI in patients with multivessel coronary artery disease is an independent risk factor for in-hospital mortality after CABG. This fact must be considered when PCI is indicated as initial alternative in patients with more severe coronary artery disease. (Arq Bras Cardiol 2012;99(1):586-595)

Nuclear-modification factor for open-heavy-flavor production at forward rapidity in Cu plus Cu collisions at root s(NN)=200 GeV

Background: Heavy-flavor production in p + p collisions is a good test of perturbative-quantum-chromodynamics (pQCD) calculations. Modification of heavy-flavor production in heavy-ion collisions relative to binary-collision scaling from p + p results, quantified with the nuclear-modification factor (R-AA), provides information on both cold-and hot-nuclear-matter effects. Midrapidity heavy-flavor R-AA measurements at the Relativistic Heavy Ion Collider have challenged parton-energy-loss models and resulted in upper limits on the viscosity-entropy ratio that are near the quantum lower bound. Such measurements have not been made in the forward-rapidity region. Purpose: Determine transverse-momentum (p(T)) spectra and the corresponding R-AA for muons from heavy-flavor meson decay in p + p and Cu + Cu collisions at root s(NN) = 200 GeV and y = 1.65. Method: Results are obtained using the semileptonic decay of heavy-flavor mesons into negative muons. The PHENIX muon-arm spectrometers measure the p(T) spectra of inclusive muon candidates. Backgrounds, primarily due to light hadrons, are determined with a Monte Carlo calculation using a set of input hadron distributions tuned to match measured-hadron distributions in the same detector and statistically subtracted. Results: The charm-production cross section in p + p collisions at root s = 200 GeV, integrated over p(T) and in the rapidity range 1.4 < y < 1.9, is found to be d(sigma e (e) over bar)/dy = 0.139 +/- 0.029 (stat)(-0.058)(+0.051) (syst) mb. This result is consistent with a perturbative fixed-order-plus-next-to-leading-log calculation within scale uncertainties and is also consistent with expectations based on the corresponding midrapidity charm-production cross section measured by PHENIX. The R-AA for heavy-flavor muons in Cu + Cu collisions is measured in three centrality bins for 1 < p(T) < 4 GeV/c. Suppression relative to binary-collision scaling (R-AA < 1) increases with centrality. Conclusions: Within experimental and theoretical uncertainties, the measured charm yield in p + p collisions is consistent with state-of-the-art pQCD calculations. Suppression in central Cu + Cu collisions suggests the presence of significant cold-nuclear-matter effects and final-state energy loss.

Production of human factor VIII-FL in 293T cells using the bicistronic MGMT(P140K)-retroviral vector

Hemophilia A is the most common X-linked bleeding disorder; it is caused by deficiency of coagulation factor VIII (FVIII). Replacement therapy with rFVIII produced from human cell line is a major goal for treating hemophilia patients. We prepared a full-length recombinant FVIII (FVIII-FL), using the pMFG-P140K retroviral vector. The IRES DNA fragment was cloned upstream to the P140K gene, providing a 9.34-kb bicistronic vector. FVIII-FL cDNA was then cloned upstream to IRES, resulting in a 16.6-kb construct. In parallel, an eGFP control vector was generated, resulting in a 10.1-kb construct. The 293T cells were transfected with these constructs, generating the 293T-FVIII-FL/P140K and 293T-eGFP/P140K cell lines. In 293T-FVIII-FL/P140K cells, FVIII and P140K mRNAs levels were 4,410 (+/- 931.7)- and 295,400 (+/- 75,769)-fold higher than in virgin cells. In 293T-eGFP/P140K cells, the eGFP and P140K mRNAs levels were 1,501,000 (+/- 493,700)- and 308,000 (+/- 139,300)-fold higher than in virgin cells. The amount of FVIII-FL was 0.2 IU/mL and 45 ng/mL FVIII cells or 4.4 IU/mu g protein. These data demonstrate the efficacy of the bicistronic retroviral vector expressing FVIII-FL and MGMT(P140K), showing that it could be used for producing the FVIII-FL protein in a human cell line.