Cultural Diffusion Was the Main Driving Mechanism of the Neolithic Transition in Southern Africa

It is well known that the Neolithic transition spread across Europe at a speed of about 1 km/yr. This result has been previously interpreted as a range expansion of the Neolithic driven mainly by demic diffusion (whereas cultural diffusion played a secondary role). However, a long-standing problem is whether this value (1 km/yr) and its interpretation (mainly demic diffusion) are characteristic only of Europe or universal (i.e. intrinsic features of Neolithic transitions all over the world). So far Neolithic spread rates outside Europe have been barely measured, and Neolithic spread rates substantially faster than 1 km/yr have not been previously reported. Here we show that the transition from hunting and gathering into herding in southern Africa spread at a rate of about 2.4 km/yr, i.e. about twice faster than the European Neolithic transition. Thus the value 1 km/yr is not a universal feature of Neolithic transitions in the world. Resorting to a recent demic-cultural wave-of-advance model, we also find that the main mechanism at work in the southern African Neolithic spread was cultural diffusion (whereas demic diffusion played a secondary role). This is in sharp contrast to the European Neolithic. Our results further suggest that Neolithic spread rates could be mainly driven by cultural diffusion in cases where the final state of this transition is herding/pastoralism (such as in southern Africa) rather than farming and stockbreeding (as in Europe)

The Productivity, Economy and Quality of Welding in the Different Geographical Areas of China - Today and in the Future

This master’s thesis gives out the real situation of the China welding industry and factories nowadays in different geographical areas, in order to inform the Finnish companies who have the willing to find a Chinese welding subcontractor a proper and correct selection concept by analyzing and supplying the information of different scale and form welding factories in different Chinese areas. The first section of this thesis gives out the general situation about the co-operation between China and Finland in the welding industry, also includes the general introduction of the Chinese welding industry. The second section gives out the geographical compartmentalization result of Chinese welding industry, which is where and how many areas will be studied in this thesis. The main body of this thesis is the real information of welding productivity, welding cost, and welding quality in China. All the information was collected from real factories in China by the author. The last section of this thesis is the improvements to the Chinese welding factories that have the willing to become a subcontractor, and the suggestions to the Finnish companies who may find a Chinese welding factory as their subcontractor in future.

Modeling of residual stresses and distortion due to welding in fillet welds

Welding has a growing role in modern world manufacturing. Welding joints are extensively used from pipes to aerospace industries. Prediction of welding residual stresses and distortions is necessary for accurate evaluation of fillet welds in relation to design and safety conditions. Residual stresses may be beneficial or detrimental, depending whether they are tensile or compressive and the loading. They directly affect the fatigue life of the weld by impacting crack growth rate. Beside theoretical background of residual stresses this study calculates residual stresses and deformations due to localized heating by welding process and subsequent rapid cooling in fillet welds. Validated methods are required for this purpose due to complexity of process, localized heating, temperature dependence of material properties and heat source. In this research both empirical and simulation methods were used for the analysis of welded joints. Finite element simulation has become a popular tool of prediction of welding residual stresses and distortion. Three different cases with and without preload have been modeled during this study. Thermal heat load set is used by calculating heat flux from the given heat input energy. First the linear and then nonlinear material behavior model is modeled for calculation of residual stresses. Experimental work is done to calculate the stresses empirically. The results from both the methods are compared to check their reliability. Residual stresses can have a significant effect on fatigue performance of the welded joints made of high strength steel. Both initial residual stress state and subsequent residual stress relaxation need to be considered for accurate description of fatigue behavior. Tensile residual stresses are detrimental and will reduce the fatigue life and compressive residual stresses will increase it. The residual stresses follow the yield strength of base or filler material and the components made of high strength steel are typically thin, where the role of distortion is emphasizing.

Optimization of parameters for fiber laser-MAG hybrid welding in shipbuilding applications

The Arctic region becoming very active area of the industrial developments since it may contain approximately 15-25% of the hydrocarbon and other valuable natural resources which are in great demand nowadays. Harsh operation conditions make the Arctic region difficult to access due to low temperatures which can drop below -50 °C in winter and various additional loads. As a result, newer and modified metallic materials are implemented which can cause certain problems in welding them properly. Steel is still the most widely used material in the Arctic regions due to high mechanical properties, cheapness and manufacturability. Moreover, with recent steel manufacturing development it is possible to make up to 1100 MPa yield strength microalloyed high strength steel which can be operated at temperatures -60 °C possessing reasonable weldability, ductility and suitable impact toughness which is the most crucial property for the Arctic usability. For many years, the arc welding was the most dominant joining method of the metallic materials. Recently, other joining methods are successfully implemented into welding manufacturing due to growing industrial demands and one of them is the laser-arc hybrid welding. The laser-arc hybrid welding successfully combines the advantages and eliminates the disadvantages of the both joining methods therefore produce less distortions, reduce the need of edge preparation, generates narrower heat-affected zone, and increase welding speed or productivity significantly. Moreover, due to easy implementation of the filler wire, accordingly the mechanical properties of the joints can be manipulated in order to produce suitable quality. Moreover, with laser-arc hybrid welding it is possible to achieve matching weld metal compared to the base material even with the low alloying welding wires without excessive softening of the HAZ in the high strength steels. As a result, the laser-arc welding methods can be the most desired and dominating welding technology nowadays, and which is already operating in automotive and shipbuilding industries with a great success. However, in the future it can be extended to offshore, pipe-laying, and heavy equipment industries for arctic environment. CO2 and Nd:YAG laser sources in combination with gas metal arc source have been used widely in the past two decades. Recently, the fiber laser sources offered high power outputs with excellent beam quality, very high electrical efficiency, low maintenance expenses, and higher mobility due to fiber optics. As a result, fiber laser-arc hybrid process offers even more extended advantages and applications. However, the information about fiber or disk laser-arc hybrid welding is very limited. The objectives of the Master’s thesis are concentrated on the study of fiber laser-MAG hybrid welding parameters in order to understand resulting mechanical properties and quality of the welds. In this work only ferrous materials are reviewed. The qualitative methodological approach has been used to achieve the objectives. This study demonstrates that laser-arc hybrid welding is suitable for welding of many types, thicknesses and strength of steels with acceptable mechanical properties along very high productivity. New developments of the fiber laser-arc hybrid process offers extended capabilities over CO2 laser combined with the arc. This work can be used as guideline in hybrid welding technology with comprehensive study the effect of welding parameter on joint quality.

Green welding in practice

Efficient production and consumption of energy has become the top priority of national and international policies around the world. Manufacturing industries have to address the requirements of the government in relation to energy saving and ecologically sustainable products. These industries are also concerned with energy and material usage due to their rising costs. Therefore industries have to find solutions that can support environmental preservation yet maintain competitiveness in the market. Welding, a major manufacturing process, consumes a great deal of material and energy. It is a crucial process in improving a product’s life-cycle cost, strength, quality and reliability. Factors which lead to weld related inefficiencies have to be effectively managed, if industries are to meet their quality requirements and fulfil a high-volume production demand. Therefore it is important to consider some practical strategies in welding process for optimization of energy and material consumption. The main objective of this thesis is to explore the methods of minimizing the ecological footprint of the welding process and methods to effectively manage its material and energy usage in the welding process. The author has performed a critical review of the factors including improved weld power source efficiency, efficient weld techniques, newly developed weld materials, intelligent welding systems, weld safety measures and personnel training. The study lends strong support to the fact that the use of eco-friendly welding units and the quality weld joints obtained with minimum possible consumption of energy and materials should be the main directions of improvement in welding systems. The study concludes that, gradually implementing the practical strategies mentioned in this thesis would help the manufacturing industries to achieve on the following - reduced power consumption, enhanced power control and manipulation, increased deposition rate, reduced cycle time, reduced joint preparation time, reduced heat affected zones, reduced repair rates, improved joint properties, reduced post-weld operations, improved automation, improved sensing and control, avoiding hazardous conditions and reduced exposure of welder to potential hazards. These improvement can help in promotion of welding as a green manufacturing process.

Interdependence in Southern Africa: an examination of the relations between Zimbabwe and South Africa

Most research on southern Africa focuses on the total dependency of the region's states--Angola, Botswana, Lesotho, Malawi, Mozambique, Swaziland, zambia and Zimbabwe--upon the dominant power, South Africa. This thesis examines the relationship between South Africa and Zimbabwe and argues that these two states are more interdependent than dependency scholars would acknowledge. Although a study of the historical period reveals that dependency theory, as defined by Raul Prebisch, Andre Gunder Frank and A. Valenzuela, is helpful for understanding the development of relations between the two states, it is unable to account for many of the characteristics of the relationship which are found in the contemporary context, especially since 1980. An examination of various economic areas of interaction, including investment, trade and transportation, as well as the political realm, indicates that each state exhibits a degree of dependence upon the other. Thus, it is possible to characterize the relationship as one of "mutual dependence," or interdependence as defined by Robert Keohane and Joseph S. Nye. Interdependence is further examined through the concepts of sensitivity and vulnerability. Sensitivity signifies the ability of a state to respond effectively to policy changes made by another state wi thin a given area of interaction without incurring large costs, while vulnerability denotes that an actor is unable to respond, or only at great cost. By applying these concepts to the relationship between Zimbabwe and South Africa, it is determined that although South Africa tends to be sensitive while Zimbabwe is generally vulnerable, the degrees to which these two states are sensi ti ve and vulnerable varies over time and issue area. As the changes wi thin South Africa start to affect relations wi th the rest of southern Africa, it wi 11 be necessary to understand the interaction between the states from an interdependency perspective if cooperation within the region wi 11 be successful. By appl ying an interdependence framework, this study aims at contributing to the understanding of relations among the countries of southern Africa in general, and between South Africa and Zimbabwe in particular.

The relationship between stem-form, stand-closure and site -conditions : the influence of environmental conditions on tree allometry and forest structure in west-central Alberta

Changes in the configuration of a tree stern result insignificant differences in its total volume and in the proportion of that volume that is merchantable timber. Tree allometry, as represented by stem-fo~, is the result of the vertical force of gravity and the horizontal force of wind. The effect of wind force is demonstrated in the relationship between stem-form, standclosure and site-conditions. An increase in wind force on the individual tree due to a decrease in stand density should produce a more tapered tree. The density of the stand is determined by the conditions that the trees are growing under. The ability of the tree to respond to increased wind force may also be a function of these conditions . This stem-form/stand-closure/site-conditions relationship was examined using a pre-existing database from westcentral Alberta. This database consisted of environmental, vegetation, soils and timber data covering a wide range of sites. There were 653 sample trees with 82 variables that formed the basis of the analysis. There were eight tree species consisting of Pinus contorta, Picea mariana, Picea engelmannii x glauca, Abies lasiocarpa, Larix laricina, Populus tremuloides, Betula papyrifera and Populus balsamifera plus a comprehensive all-species data set. As the actual conformation of the stern is very individual, stem-fo~was represented by the diameter at breast height to total height r~tio. The four stand-closure variables, crown closure, total basal area, total volume and total number of stems were reduced to total basal area and total number of stems utilizing a bivariate correlation matrix by species. Site-conditions were subdivided into macro, meso and micro variables and reduced in number 3 using cross-tabulations, bivariate correlation and principal components analysis as screening tools. The stem-fo~/stand-closure relationship was examined using bivariate correlation coefficients for stem-fo~ with total number of stems and stem-fo~ with total basal area. The stem-fo~/site-conditions and the stand-closure/site- conditions relationships were examined using multiple correlation coefficients. The stem-form/stand-closure/site-conditions relationship was examined using multiple correlation coefficients in separate analyses for both total number of stems and total basal area. An increase in stand-closure produced a decrease in stem-form for both total number of stems and total basal area for most species. There was a significant relationship between stem-form and site-conditions and between stand-closure and site-conditions for both total number of stems and total basal area for most species. There was a significant relationship between the stemform and site-conditions, including the stand-closure, for most species; total number of stems was involved independently of the site-conditions in the prediction of stem-form and total basal area was not. Larix laricina and Betula papyrifera were the exceptions to the trends observed with most species. The influence of both stand-closure (total number of stems in particular) and site-conditions (elevation in particular) suggest that forest management practices should include these- ecological parameters in determining appropriate restocking levels.

DEFORMATION OF INTERIOR LAYERED DEPOSITS (ILD) AND THEIR ASSOCIATED LANDFORMS IN WEST CANDOR CHASMA, MARS: IMPLICATIONS FOR THE TIMING OF ILD DEPOSITION

On Mars, interior layered deposits (ILD) provide evidence that water was once stable at the surface of the planet and present in large quantities. In West Candor Chasma, the ILD and their associated landforms record the depositional history of the chasma, and the deformation of those deposits provide insight into the stresses acting on them and the chasma as a whole. The post ILD structural history of West Candor is interpreted by analyzing the spatial relationships and orientation trends of structural features within the ILD. Therecording of stresses through brittle deformation of ILDs implies that the ILD had been lithified before the stress was imposed. Based on the prominent orientation trends of deformation features, the orientation of the stress regime acting upon the ILD appears to be linked to the regime that initially created the chasma-forming faults. An additional minor stress orientation was also revealed and may be related to large structures outside west Candor Chasma. The late depositional history of Ceti Mensa is herein investigated by examining the attributes and spatial relationship between unique corrugated, linear formations (CLF). The CLFs appear to be aeolian in origin but display clear indications of brittle deformation, indicating they have been Iithified. Evidence of lithification and the mineral composition of the surrounding material support the interpretation of circulating water in the area.

Male and Female Perspectives on Female Principals in South Africa

In South Africa, women are at a high risk of discrimination and opposition to authority when they obtain leadership positions, especially in education (Gouws & Kotze, 2007). The purpose of this study was to inquire into 10 secondary school educators’ perceptions of female principals’ effectiveness in two South African schools. Qualitative case study research methodology included interviews, as well as participant observations and semi-structured interviews. These interviews were conducted within two school settings in South Africa. The participants were teachers, department heads, and deputy principals. When the data were analyzed, it was found that all participants wanted a leader who was transformational and there was a strong preference for those who had feminine traits. This research showed the strong desire for transformational leaders as well as how feminine characteristics are not only starting to become more accepted, but also are now becoming preferred.

Measuring and evaluating quality of care in referral maternities in Mali and Senegal in the context of overlapping interventions

Dans cette thèse, nous décrivons les résultats d’un projet de recherche visant à mesurer et évaluer la qualité des soins obstétricaux des hôpitaux de référence au Mali et au Sénégal. Dans ces pays, la mortalité maternelle hospitalière est élevée et est liée en partie à la pratique médicale inadéquate. Cette recherche a été réalisée dans le cadre de l’étude QUARITE, un essai randomisé en grappe évaluant l’efficacité du programme GESTA International visant à réduire la mortalité maternelle hospitalière. GESTA a été mis en œuvre entre 2008 et 2010 et consistait en la formation des professionnels de santé et en la revue des cas de décès maternels. En parallèle de QUARITE, les programmes de prévention de la transmission du VIH de la mère à l’enfant (PTME) ont été mis à l’échelle à travers les pays. Ces derniers ayant également la capacité d’augmenter la qualité des soins obstétricaux, nous avons donc évalué les effets des deux programmes (GESTA et PTME) sur la qualité des soins. Dans un premier temps, à l’aide d’une recension des écrits nous avons évalué la capacité d’un audit clinique basé sur des critères à mesurer la qualité des soins obstétricaux. Cet audit vérifiait si l’offre des soins avait respecté les critères cliniques définissant la meilleure prise en charge selon l’évidence scientifique et l’avis des experts. Nous avons démontré que cet outil est largement utilisé dans les pays à faibles et moyens revenus, malgré le peu d’évidence sur sa validité (article 1). Dans un deuxième temps, nous avons développé un audit clinique basé sur des critères qui s’applique au contexte ouest-africain et qui a été approuvé par des experts-obstétriciens nationaux et internationaux. À partir des dossiers obstétricaux, les actes médicaux posés pendant le travail et l’accouchement ont été évalués à l‘aide de cet instrument. La qualité des soins a été estimée sous forme de pourcentage de critères atteints. Appliqué dans différents contextes et par différents auditeurs, nous avons démontré que notre instrument est fiable et valide (article 3). Néanmoins, l’expérience de l’audit nous a amenés à nous questionner sur le mauvais remplissage des dossiers médicaux et ses conséquences sur la qualité des soins (article 2). Dans un troisième temps, l’outil a été appliqué à large échelle pour évaluer les effets de l’intervention GESTA (article 4). Nous avons mené une révision de plus de 800 dossiers obstétricaux dans 32 hôpitaux de référence (16 bénéficiaires de l’intervention et 16 non-bénéficiaires). Grâce à cet audit clinique, nous avons démontré que le programme GESTA contribue à l’amélioration de la qualité des soins, spécifiquement l’examen clinique lors de l’admission et le suivi après l’accouchement. Dernièrement, nous avons utilisé cet instrument afin d’évaluer les effets des programmes de PTME sur la qualité des soins obstétricaux (article 5). Notre travail a documenté que seulement certaines composantes du programme de PTME améliorent la qualité des soins telles que la formation des professionnels et les services complémentaires en nutrition. En conclusion, cette recherche a identifié plusieurs pistes d’intervention pour améliorer la qualité des soins obstétricaux en Afrique de l’Ouest.

A Comparative Study Of The Organisation And Management Of Notihed Markets In Bangladesh With The Organisation And Management Of Regulated Markets In West Bengal India

For improving agricultural marketing, which has been discussed in the previous chapter, the Government has intervened in different ways. The direct regulatory role through the regulation of markets and market practices is one of the ways in which governmental intervention can improve agricultural marketing. This study is an enquiry of the direct regulatory role of the government through regulation of markets and market practices. By restructuring the operational methods and redesigning the existing physical markets, this system gives direct benefit to the cultivating class and protects them from the market manipulations of organised and powerful private traders. If traders do not continue their trade for the time being they will not be affected financially, because they are resourceful or financially solvent. On the other hand, Cultivators must sell their produce immediately after harvesting for the lack of additional facilities or to satisfy other needs for which finance is required. Another important reason is that Cultivators/farmers are not organised and because of lack of their organisation, they sell their produces individually. In this situation, a farmer is helpless when astute traders indulge in manipulations at the time of purchase of the produces. So it is the government's obligation to protect the interest of the farmers. Protection of the farmer/cultivator is necessary not only from the point of social justice but also from that of economic growth. If the farmers are assured of a remunerative or incentive price for their produce, they will get the inspiration to produce more and through more production, economy will be developed and the nation as a whole will be benefitted. This study will examine the management system of the markets through the direct regulatory role played by the governments to control markets and market practices in West Bengal and Bangladesh.

Marketing Channels in Ornamental Fish Trade in West Bengal

A lucrative export market and high domestic demand has made ornamental fish industry in West Bengal a potential source for income generation. The study aimed to identify: (i) the commercially important size groups of main ornamental fish varieties available in the state; (ii) the existing supply chain; (iii) major constraints for development of the industry; (iv) and to anlayse price spread of commercially important varieties; and (v) to evaluate the profitability of operation at different stakeholder levels in the marketing chain. Export market of ornamental fishes in the state followed a single supply channel while three different distribution channels existed in the domestic market. High electricity charges was the major problem faced by breeders (producers/rearers) whereas lack of technical knowledge regarding transportation was the major constraint for wholesalers. Lack of knowledge on proper health management inhibited the growth of retail industry. The fresh water catfish, angel, molly, arowana, gold fish, tetras, and gouramis showed comparatively higher breeders’ share in consumers’ rupee. Wholesalers were earning comparatively higher annual profit than the other stakeholders due to moderate initial investment and also due to the comparatively lower risk involved.

Legume rotation effects on early growth and rhizosphere microbiology of sorghum in West African soils

Cereal yield increases in legume rotations on west African soils were the subject of much recent research aiming at the development of more productive cropping systems for the mainly subsistence-oriented agriculture in this region. However, little has been done to elucidate the possible contribution of soil microbiological factors to these rotation effects. Therefore a pot trial was conducted using legume rotation and continuous cereal soils each from one site in Burkina Faso and two sites in Togo where cropping system experiments had been conducted over 4 yrs. All soils were planted with seedlings of sorghum (Sorghum bicolor L. Moench). From 21 days after sowing onwards relative growth rates in rotation soils were higher than in the continuous cereal soils, resulting in between 69 and 500% higher shoot dry matter of rotation sorghum compared to sorghum growing in continuous cereal soils. Across sites rotation soils were characterized by higher pH, higher microbial N and a lower microbial biomass C/N ratio and, with the exception of one site, a higher fungal biomass in the rhizosphere. The bacterial and eukaryal community structure in the soil, assessed by denaturing gradient gel electrophoresis (DGGE), differed between sites. However, only at one site differed the bacterial and the eukaryal community structure in the rotation soil significantly from that in the continuous cereal soil. Although the results of this study confirmed the marked plantgrowth differences between sub-Saharan legume-rotation soils and their continuous cereal counterparts they also showed the difficulties to differentiate possible microbiological causes from their effects.