Nd/Ca ratios in plankton-towed and core top foraminifera

Planktic foraminifera have been used as recorders of the neodymium (Nd) isotopic composition of seawater, although there is still controversy over the precise provenance of the Nd signal. We present an extensive, multispecific plankton tow Nd/Ca data set from several geographic locations (SE Atlantic, NE Atlantic, Norwegian Sea, and western Mediterranean), together with core top samples from the Mediterranean region. The range of Nd/Ca ratios in plankton-towed foraminifera, cleaned only of organic material, from all regions (0.01-0.7 µmol/mol), is similar to previously published analyses of sedimentary foraminifera cleaned using both oxidative and reductive steps, with distribution coefficients (Kd) ranging between 4 and 302. For the Mediterranean, where core top and plankton tow data are both available, the range for plankton tows (0.05-0.7 µmol/mol) is essentially identical to that for the core tops (0.1-0.5 µmol/mol). Readsorption of Nd during cleaning is ruled out by the fact that the plankton tow samples underwent only an oxidative cleaning process. We find a relationship between manganese (Mn) and Nd in plankton tow samples that is mirrored by a similar correlation in core top samples. This relationship suggests that Fe-Mn coatings are of negligible importance to the Nd budgets of foraminifera as the Nd/Mn ratio it implies is over an order of magnitude greater than that seen in other Fe-Mn oxide phases. Rather, since both plankton tows and core tops present a similar behavior, the Nd/Mn relationship must originate in the upper water column. The data are consistent with the acquisition of Nd and Mn from the water column by binding to organic material and the fact that intratest organic material is shielded from both aggressive cleaning and diagenetic processes. Collectively, the results help to explain two abiding puzzles about Nd in sedimentary planktic foraminifera: their high REE contents and the fact that they record a surface water Nd isotopic signal, regardless of the cleaning procedure used.

SIGNIFICANCE OF HEAT DISSIPATION IN THE CATHODE CATALYST LAYER ON THE LIFETIME AND RELIABILITY OF POLYMER ELECTROLYTE FUEL CELLS

To study the dissipation of heat generated due to the formation of pinholes that cause local hotspots in the catalyst layer of the Polymer Electrolyte Fuel Cell, a two-phase non-isothermal model has been developed by coupling Darcy’s law with heat transport. The domain under consideration is a section of the membrane electrode assembly with a half-channel and a half-rib. Five potential locations where a pinhole might form were analyzed: at the midplane of the channel, midway between the channel midplane and the channel wall, at the channel or rib wall, midway between the rib midplane and the channel wall, at the midplane of the rib. In the first part of this work, a preliminary thermal model was developed. The model was then refined to account for the two-phase effects. A sensitivity study was done to evaluate the effect of the following properties on the maximum temperature in the domain: Catalyst layer thermal conductivity, the Microporous layer thermal conductivity, the anisotropy factor of the Catalyst layer thermal conductivity, the Porous transport layer porosity, the liquid water distribution and the thickness of the membrane and porous layers. Accounting for the two-phase effects, a slight cooling effect was observed across all hotspot locations. The thermal properties of the catalyst layer were shown to have a limited impact on the maximum temperature in the catalyst layer of new fuel cells without pinhole. However, as hotspots start to appear, thermal properties play a more significant role in mitigating the thermal runaway.

STPA-SafeSec: Safety and Security Analysis for Cyber-Physical Systems

Cyber-physical systems tightly integrate physical processes and information and communication technologies. As today’s critical infrastructures, e.g., the power grid or water distribution networks, are complex cyber-physical systems, ensuring their safety and security becomes of paramount importance. Traditional safety analysis methods, such as HAZOP, are ill-suited to assess these systems. Furthermore, cybersecurity vulnerabilities are often not considered critical, because their effects on the physical processes are not fully understood. In this work, we present STPA-SafeSec, a novel analysis methodology for both safety and security. Its results show the dependencies between cybersecurity vulnerabilities and system safety. Using this information, the most effective mitigation strategies to ensure safety and security of the system can be readily identified. We apply STPA-SafeSec to a use case in the power grid domain, and highlight its benefits.

Bacterial biofilms, antibiotic resistance and healthcare-associated infections: a dangerous connection

In 2012, were estimated 6.7 million cases of healthcare-associated infections (HAI) either in long-term care facilities or acute-care hospitals from which result 37,000 deaths configuring a serious public health problem. The etiological agents are diverse and often resistant to antimicrobial drugs. One of the mechanisms responsible for the emergence of drug resistance is biofilm assembly. Biofilms are defined as thin layers of microorganisms adhering to the surface of a structure, which may be organic or inorganic, together with the polymers that they secrete. They are dynamic structures which experience different stages of organization with the ageing and are linked to an increase in bacterial resistance to host defense mechanisms, antibiotics, sterilization procedures other than autoclaving, persistence in water distribution systems and other surfaces. The understanding of bacteria organization within the biofilm and the identification of differences between planktonic and sessile forms of bacteria will be a step forward to fight HAIs.

Estágio profissional em gabinete de engenharia, na componente de climatização

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica com Especialização em Energia, Climatização e Refrigeração

Desenvolvimento de solenóides para eletroválvulas hidráulicas

Os solenóides para eletroválvulas, em conjunto com outros produtos e equipamentos, permitem a automação dos sistemas de distribuição de águas não potáveis, como, por exemplo, em sistemas de rega. Deste modo é possível controlar diversos parâmetros, como o caudal e a pressão da água que passa na válvula, podendo estes ser fiscalizados à distância. Neste trabalho, foram desenvolvidos solenóides para acoplar a válvulas que se destinam à rega agrícola, comercializadas pela empresa JPrior, Fábrica de Plásticos, Lda. Para o efeito, foram definidos vários processos necessários para a criação de uma linha piloto de pré industrialização destes dispositivos. Etapas como a conceção do dispositivo, prototipagem, testes de temperatura, consumo de corrente, estabilidade eletromecânica e testes de desempenho associados a diferentes valores de pressão e de caudal de funcionamento, foram essenciais para este desenvolvimento, assim como, análises estruturais e morfológicas do material que constitui o núcleo dos solenóides. Além disso, procurou-se responder às necessidades do mercado numa perspetiva mais completa do que a existente. Para isso, foram produzidos dois tipos de solenóides de 24 V AC, com pressões máximas de funcionamento de 4 bar e de 12 bar.

Phase fraction distribution measurement of oil-water flow using a capacitance wire-mesh sensor

In this paper, a novel wire-mesh sensor based on permittivity (capacitance) measurements is applied to generate images of the phase fraction distribution and investigate the flow of viscous oil and water in a horizontal pipe. Phase fraction values were calculated from the raw data delivered by the wire-mesh sensor using different mixture permittivity models. Furthermore, these data were validated against quick-closing valve measurements. Investigated flow patterns were dispersion of oil in water (Do/w) and dispersion of oil in water and water in oil (Do/w&w/o). The Maxwell-Garnett mixing model is better suited for Dw/o and the logarithmic model for Do/w&w/o flow pattern. Images of the time-averaged cross-sectional oil fraction distribution along with axial slice images were used to visualize and disclose some details of the flow.