Flow injection analysis of free glycerol in biodiesel using a copper electrode as an amperometric detector

The main goal of this work was to develop a simple analytical method for quantification of glycerol based on the electrocatalytic oxidation of glycerol on the copper surface adapted in a flow injection system. Under optimal experimental conditions, the peak current response increases linearly with glycerol concentration over the range 60-3200 mg kg(-1) (equivalent to 3-160 mg L(-1) in solution). The repeatability of the electrode response in the flow injection analysis (FIA) configuration was evaluated as 5% (n = 10), and the detection limit of the method was estimated to be 5 mg kg(-1) in biodiesel (equivalent to 250 mu g L(-1) in solution) (S/N = 3). The sample throughput under optimised conditions was estimated to be 90 h(-1). Different types of biodiesel samples (B100), as in the types of vegetable oils or animal fats used to produce the fuels, were analysed (seven samples). The only sample pre-treatment used was an extraction of glycerol from the biodiesel sample containing a ratio of 5 mL of water to 250 mg of biodiesel. The proposed method improves the analytical parameters obtained by other electroanalytical methods for quantification of glycerol in biodiesel samples, and its accuracy was evaluated using a spike-and-recovery assay, where all the biodiesel samples used obtained admissible values according to the Association of Official Analytical Chemists. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.

Reversible polymerization of novel monomers bearing furan and plant oil moieties: a double click exploitation of renewable resources

Monomers based on plant oil derivatives bearing furan heterocycles appended through thiol-ene click chemistry were prepared and, subsequently, polymerized via a second type of click reaction, i. e. the Diels-Alder (DA) polycondensation between furan and maleimide complementary moieties. Two basic approaches were considered for these DA polymerizations, namely (i) the use of monomers with two terminal furan rings in conjunction with bismaleimides (AA + BB systems) and (ii) the use of a protected AB monomer incorporating both furan and maleimide end groups. This study clearly showed that both strategies were successful, albeit with different outcomes, in terms of the nature of the ensuing products. The application of the retro-DA reaction to these polymers confirmed their thermoreversible character, i. e. the clean-cut return to their respective starting monomers, opening the way to original macromolecular materials with interesting applications, like mendability and recyclability.

Liquid-Liquid Equilibrium Data for the System Lard plus Oleic Acid plus Ethanol + Water at 318.2 K: Cholesterol Distribution Coefficients

This research reports liquid liquid equilibrium data for the system lard (swine fat), cis-9-octadecenoic acid (oleic acid), ethanol, and water at 318.2 K, as well as their correlation with the nonrandom two-liquid (NRTL) and universal quasichemical activity coefficient (UNIQUAC) thermodynamic equations, which have provided global deviations of 0.41 % and 0.53 %, respectively. Additional equilibrium experiments were also performed to obtain cholesterol partition (or distribution) coefficients to verify the availability of the use of ethanol plus water to reduce the cholesterol content in lard. The partition experiments were performed with concentrations of free fatty acids (commercial oleic acid) that varied from (0 to 20) mass % and of water in the solvent that varied from (0 to 18) mass %. The percentage of free fatty acids initially present in lard had a slight effect on the distribution of cholesterol between the phases. Furthermore, the distribution coefficients decreased by adding water in the ethanol; specifically, it resulted in a diminution of the capability of the solvent to remove the cholesterol.

Production of methyl and ethyl biodiesel fuel from pequi oil (Caryocar brasiliensis Camb.)

We studied the physical and chemical characteristics of methyl and ethyl esters (biodiesel) produced by transesterification of pequi oil (Caryocar brasiliensis Camb.) in the presence of potassium hydroxide. The oil extracted from pequi seed comprises 60% of the fruit content. Such characteristics as density, acidity, viscosity, and carbon residue of the biodiesel meet ANP (Brazilian National Petroleum Agency) standards. Our tests demonstrated the feasibility of utilizing pequi oil for biodiesel production.

Mejora del bienestar del lenguado senegalés ("Solea senegalensis"): modulación nutricional de la respuesta de estrés y sistema inmune

Programa de doctorado: Acuicultura: producción controlada de organismos acuáticos

Use of solvents and environmental friendly materials for applications in Green Chemistry

The present Thesis studies three alternative solvent groups as sustainable replacement of traditional organic solvents. Some aspects of fluorinated solvents, supercritical fluids and ionic liquids, have been analysed with a critical approach and their effective “greenness” has been evaluated from the points of view of the synthesis, the properties and the applications. In particular, the attention has been put on the environmental and human health issues, evaluating the eco-toxicity, the toxicity and the persistence, to underline that applicability and sustainability are subjects with equal importance. The “green” features of fluorous solvents and supercritical fluids are almost well-established; in particular supercritical carbon dioxide (scCO2) is probably the “greenest” solvent among the alternative solvent systems developed in the last years, enabling to combine numerous advantages both from the point of view of industrial/technological applications and eco-compatibility. In the Thesis the analysis of these two classes of alternative solvents has been mainly focused on their applicability, rather than the evaluation of their environmental impact. Specifically they have been evaluated as alternative media for non-aqueous biocatalysis. For this purpose, the hydrophobic ion pairing (HIP), which allows solubilising enzymes in apolar solvents by an ion pairing between the protein and a surfactant, has been investigated as effective enzymatic derivatisation technique to improve the catalytic activity under homogeneous conditions in non conventional media. The results showed that the complex enzyme-surfactant was much more active both in fluorous solvents and in supercritical carbon dioxide than the native form of the enzyme. Ionic liquids, especially imidazolium salts, have been proposed some years ago as “fully green” alternative solvents; however this epithet does not take into account several “brown” aspects such as their synthesis from petro-chemical starting materials, their considerable eco-toxicity, toxicity and resistance to biodegradation, and the difficulty of clearly outline applications in which ionic liquids are really more advantageous than traditional solvents. For all of these reasons in this Thesis a critical analysis of ionic liquids has been focused on three main topics: i) alternative synthesis by introducing structural moieties which could reduce the toxicity of the most known liquid salts, and by using starting materials from renewable resources; ii) on the evaluation of their environmental impact through eco-toxicological tests (Daphnia magna and Vibrio fischeri acute toxicity tests, and algal growth inhibition), toxicity tests (MTT test, AChE inhibition and LDH release tests) and fate and rate of aerobic biodegradation in soil and water; iii) and on the demonstration of their effectiveness as reaction media in organo-catalysis and as extractive solvents in the recovery of vegetable oil from terrestrial and aquatic biomass. The results about eco-toxicity tests with Daphnia magna, Vibrio fischeri and algae, and toxicity assay using cultured cell lines, clearly indicate that the difference in toxicity between alkyl and oxygenated cations relies in differences of polarity, according to the general trend of decreasing toxicity by decreasing the lipophilicity. Independently by the biological approach in fact, all the results are in agreement, showing a lower toxicity for compounds with oxygenated lateral chains than for those having purely alkyl lateral chains. These findings indicate that an appropriate choice of cation and anion structures is important not only to design the IL with improved and suitable chemico-physical properties but also to obtain safer and eco-friendly ILs. Moreover there is a clear indication that the composition of the abiotic environment has to be taken into account when the toxicity of ILs in various biological test systems is analysed, because, for example, the data reported in the Thesis indicate a significant influence of salinity variations on algal toxicity. Aerobic biodegradation of four imidazolium ionic liquids, two alkylated and two oxygenated, in soil was evaluated for the first time. Alkyl ionic liquids were shown to be biodegradable over the 6 months test period, and in contrast no significant mineralisation was observed with oxygenated derivatives. A different result was observed in the aerobic biodegradation of alkylated and oxygenated pyridinium ionic liquids in water because all the ionic liquids were almost completely degraded after 10 days, independently by the number of oxygen in the lateral chain of the cation. The synthesis of new ionic liquids by using renewable feedstock as starting materials, has been developed through the synthesis of furan-based ion pairs from furfural. The new ammonium salts were synthesised in very good yields, good purity of the products and wide versatility, combining low melting points with high decomposition temperatures and reduced viscosities. Regarding the possible applications as surfactants and biocides, furan-based salts could be a valuable alternative to benzyltributylammonium salts and benzalkonium chloride that are produced from non-renewable resources. A new procedure for the allylation of ketones and aldehydes with tetraallyltin in ionic liquids was developed. The reaction afforded high yields both in sulfonate-containing ILs and in ILs without sulfonate upon addition of a small amount of sulfonic acid. The checked reaction resulted in peculiar chemoselectivity favouring aliphatic substrates towards aromatic ketones and good stereoselectivity in the allylation of levoglucosenone. Finally ILs-based systems could be easily and successfully recycled, making the described procedure environmentally benign. The potential role of switchable polarity solvents as a green technology for the extraction of vegetable oil from terrestrial and aquatic biomass has been investigated. The extraction efficiency of terrestrial biomass rich in triacylglycerols, as soy bean flakes and sunflower seeds, was comparable to those of traditional organic solvents, being the yield of vegetable oils recovery very similar. Switchable polarity solvents as been also exploited for the first time in the extraction of hydrocarbons from the microalga Botryococcus braunii, demonstrating the efficiency of the process for the extraction of both dried microalgal biomass and directly of the aqueous growth medium. The switchable polarity solvents exhibited better extraction efficiency than conventional solvents, both with dried and liquid samples. This is an important issue considering that the harvest and the dewatering of algal biomass have a large impact on overall costs and energy balance.

Valutazione della qualità ed autenticità di prodotti oleari e lattiero caseari mediante metodi fisici di analisi accoppiati a tecniche statistiche multivariate

Questa tesi descrive alcuni studi di messa a punto di metodi di analisi fisici accoppiati con tecniche statistiche multivariate per valutare la qualità e l’autenticità di oli vegetali e prodotti caseari. L’applicazione di strumenti fisici permette di abbattere i costi ed i tempi necessari per le analisi classiche ed allo stesso tempo può fornire un insieme diverso di informazioni che possono riguardare tanto la qualità come l’autenticità di prodotti. Per il buon funzionamento di tali metodi è necessaria la costruzione di modelli statistici robusti che utilizzino set di dati correttamente raccolti e rappresentativi del campo di applicazione. In questo lavoro di tesi sono stati analizzati oli vegetali e alcune tipologie di formaggi (in particolare pecorini per due lavori di ricerca e Parmigiano-Reggiano per un altro). Sono stati utilizzati diversi strumenti di analisi (metodi fisici), in particolare la spettroscopia, l’analisi termica differenziale, il naso elettronico, oltre a metodiche separative tradizionali. I dati ottenuti dalle analisi sono stati trattati mediante diverse tecniche statistiche, soprattutto: minimi quadrati parziali; regressione lineare multipla ed analisi discriminante lineare.

Mexico: A new heavy weight in a global world

In the last three decades, obesity has been gaining recognition as a serious public health problem in Mexico. This epidemic developed insidiously in a country that was still focused on chronic under-nutrition in the population. During that same period, macro-economic reforms projected Mexico into the global economic arena. Foreign investments, trade in goods and services, and technological transfers were promoted through participation in numerous trade agreements between Mexico and other countries. The North American Trade Agreement (NAFTA), signed in 1994, promised an integrated market between the three North American countries: Canada, the United States, and Mexico. Although these trade policies were likely to have effects on the available food supply in Mexico, this association has not been elucidated. In this case study, we examine how these trade liberalization policies may have influenced the food supply in Mexico.^ Information on the trade of food commodities between the United States and Mexico and the nature of foreign investment in Mexico was compiled using public data available through American, Mexican, and other international published reports for 1986 through 2011. After the implementation of NAFTA, an increase in trade and investments was observed between Mexico and its two North American partners, but most of the trade increase occurred between the US and Mexico. Since the liberalization of trade policies between these counties, exports of fruit and vegetables into the U.S. from Mexico have increased, while exports of cereals, fats, vegetable oils, meat, dairy products and processed foods from the U.S. into Mexico have increased. During this same time period, there has been an increase in the foreign direct investment in the food industry in Mexico, as well as changes in the types and amounts of dietary energy available on a population level. Specifically, between 1990 to 2006, the dietary energy supply per person has increased 6.1% available animal protein has increased 35.8%, and available fat has increased 18.9%.^ Thus, this case study suggests that the recent changes in food-related industries through foreign direct investment and market liberalization may be likely contributors to the obesogenic food environment in Mexico. Although this initial case study provides interesting data, whether trade liberalization policies should be considered hazardous for health as a distal determinant of the obesity epidemic needs to be further examined using a more stringent study design or further follow up of the US Mexico trade data.^

Thinning Scab-resistant Apples with Liquid Lime Sulfur Sprays during Bloom

Growing scab-resistant apple cultivars on fully dwarfing rootstocks increases the feasibility for producing organically grown apples in the Midwest. However, in an organic orchard, fruit thinning to optimize crop load must be done by hand at a very high labor expense. The alternative is biennial bearing and inconsistent supply to meet consumer demands. Recently, sprays containing organicapproved materials such as liquid lime sulfur, fish, and various vegetable oils, salts, and kaolin have been tried alone or in combination for thinning apples with some degree of success. Lime sulfur alone or in combination with spray oil was recently labeled for use in Washington state orchards. This study was undertaken to evaluate the effectiveness of liquid lime sulfur alone and in combination with spray oil applied at various times during bloom on thinning three scab-resistant apple cultivars under Iowa conditions.

Rendimiento de aceite de colza cultivada bajo riego : Mendoza (Argentina)

En el 2010 será obligatorio cortar en un 5% los combustibles de origen fósil (gasoil y naftas) con biocombustibles (biodiesel y bioetanol). La principal materia prima para elaborar biodiesel son los aceites vegetales. Cada región tiene ventajas comparativas para producir alguna oleaginosa. En Cuyo, una de las limitantes para la producción agrícola es la disponibilidad de agua, fundamentalmente en verano, cuando demandan este recurso los cultivos tradicionales de la región. En este contexto, se estudió el rendimiento del cultivo de colza, oleaginosa de ciclo invernal, en el oasis Norte de la región de Cuyo, con el objetivo de valorar su aptitud para proveer aceite. Se probaron tres cultivares en tres fechas de siembra (abril, mayo y junio), durante los ciclos 2005 y 2006. Las siembras de abril y mayo rindieron más que la de junio y estuvieron asociadas a mayor duración de ciclo del cultivo. No hubo diferencias de porcentaje de aceite de las semillas entre tratamientos, que osciló entre el 48 y 49%. El rendimiento de aceite por ha superó los 1500 kg en las siembras de abril y mayo y estuvo algo por debajo en las de junio.

Evaluación de aceites y extractos vegetales para el control de Sitophilus zeamaiz y su efecto en la calidad de semilla de maíz

Sitophilus zeamaiz es una de las especies de gorgojos que más pérdidas causa en granos almacenados en el mundo; su control se basa principalmente en productos sintéticos, que con el paso del tiempo resultan menos efectivos. En la presente investigación se evaluaron aceites vegetales de ricino, soya y extractos vegetales de neem y lila sobre poblaciones de S. zeamaiz y sus efectos sobre la germinación y parámetros fisiológicos de las plántulas. Los resultados muestran que el aceite de soya dio los mejores resultados de control, al presentar mortalidades entre un 92 y 100% a las 192 horas. Sin embargo, este aceite afecta la germinación a dosis de 2000 a 10000 ppm. El extracto de neem presentó mortalidades del 78,75 y 91,25% a las 192 horas, sin afectar la germinación ni las propiedades agronómicas. Finalmente, el aceite de ricino y el extracto de lila fueron los tratamientos que, para las condiciones del presente estudio, no mostraron altas mortalidades sobre S. zeamaiz.

Density of alkyl esters and its mixtures

Biodiesel density is a key parameter in biodiesel simulations and process development. In this work we selected, evaluated and improved two density models, one theoretical (Rackett-Soave) and one empirical (Lapuerta's method) for methanol based biodiesels (FAME) and ethanol based biodiesel (FAEE). For this purpose, biodiesel was produced from vegetable oils (sunflower, rapeseed, soybean, olive, safflower and other two commercial mixtures of vegetable oils) and animal fats (edible and crude pork fat and beef tallow) using both methanol and ethanol for the transesterification reactions, and blended to get 21 FAME and 21 FAEE, reporting their density and detailed composition. Bibliographic data have also been used. The Rackett-Soave method has been improved by the use of a new acentric factor correlation, whereas the parameters of the empirical one are improved by considering a bigger density data bank. Results show that the evaluated models could be used to estimate the biodiesel density with a good grade of accuracy but the performed modifications improve the accuracy of the models: ARD (%) for FAME; 0.33, and FAEE; 0.26, both calculated with the modification of Rackett-Soave method and ARD (%) for FAME; 0.40 calculated with the modification of the Lapuerta's method).

Estudio técnico-económico de una planta de producción de biodiesel

Se explica las posibles razones que han obligado a varias de las plantas de biodiésel en España a cerrar a pesar de estar siendo auspiciadas por la Unión Europea y fomentadas, mediante normativas específicas y ayudas sustanciales en cada uno de los países miembros, a fin de reforzar la utilización de los biocarburantes, como energía alternativa a los combustibles fósiles, debido a las ventajas medioambientales y sociopolíticas que conllevan. Para ello se ha empezado realizando un estudio del sector y de su funcionamiento así como de la evolución reciente del mercado tanto en Europa como en España. Posteriormente se ha modelizado una planta de biodiesel tipo desde las primeras fases de su construcción hasta su puesta en funcionamiento, para, a continuación analizar su desarrollo haciendo especial hincapié en la evolución de las principales variables económicas anteriormente estudiadas que han llevado finalmente a tener que cerrarla por falta de rentabilidad. El proceso de producción del biodiésel desde aceites vegetales y grasas animales mantiene un fuerte crecimiento en los mercados de la Unión Europea al igual que en Estados Unidos y Canadá. La producción de biodiésel se ha incrementado rápidamente en los últimos años, ya que es una alternativa renovable a los carburantes, como el petróleo o el diésel. La producción por trasesterificación de aceites vegetales y grasas animales, dan al biodiésel una densidad, un punto de encendido, viscosidad, estabilidad a la oxidación similares al diésel. Estas propiedades permiten a la mezcla de biodiésel poder usarlo en motores convencionales sin necesidad de grandes modificaciones. El objetivo fundamental de este proyecto es, dentro de un entorno económico hostil, explicar el posible porqué de la situación de las plantas de biodiésel en España, haciendo un análisis de la viabilidad económico – financiera de una planta de producción de biodiésel. La instalación de la que parte el presente proyecto es la de una planta, situada en la provincia de Jaén, con una capacidad de producción de 100 000 t/año, con una previsión de funcionamiento continua y con una vida útil estimada de 15 años. Una vez finalizado el estudio económico, se ha valorado el impacto del mercado en el funcionamiento de la planta, tanto a nivel internacional debido a la competencia desleal, como nacional, debido a las ayudas en los cultivos. Se deduce que la rentabilidad de una planta de biodiésel es relativamente positiva pero viene dada por un gran número de variables internas y externas que hacen un negocio inestable y poco rentable. ABSTRACT It explains the possible reasons that have forced several biodiesel plants in Spain to close in spite of being sponsored by the European Union and promoted by specific regulations and substantial aid in each of the member countries to strengthen the use of biofuels as alternative energy to fossil fuels because of the environmental and sociopolitical involving VII For this we have begun a study of the sector and its operation as well as the recent market developments in Europe and in Spain. Later was modeled biodiesel plant type from the early stages of construction to commissioning, to then analyze its development with particular emphasis on the evolution of the main economic variables that have been previously studied eventually have to close by unprofitability. The processes and production of biodiesel (methyl ester) from vegetable oil and animal fat feedstocks remain a strong growth market in the European Union as well as the United States and Canada. Biodiesel production has increased rapidly in this last years as producers sought a renewable alternative to petroleum fuel. Produced by the trans-esterification of vegetable oils and animal fats, biodiesel has similar density, flash point, viscosity, oxidation stability to petroleum diesel. These similarities enable biodiesel blends to be used in conventional diesel engines without significant modifications. This proyect gives an overview of current developments with regard to biodiesel technology, the Spain biofuel market, and national biofuel policies, looking at closely the economic-financial feasibility of a biodiesel production plant. The installation, situated at Linares (Jaén), has a production capability of 100 000 t/year. The operation estimated is constant and with a product life of 15 years. Finished the part destined to the economic view of this project, it has been considered the adverse effects on the overall performance and the financial situation of the industry. It follows form the study that biodiesel plant´s profitability is relatively high, but it is given by a large numbers of variables, internals and externals, which have made an unviable and unsustainable business.

Atlantic Salmon (Salmo salar L.) as a Marine Functional Source of Gamma-Tocopherol

Gamma tocopherol (gT) exhibits beneficial cardiovascular effects partly due to its anti-inflammatory activity. Important sources of gT are vegetable oils. However, little is known to what extent gT can be transferred into marine animal species such as Atlantic salmon by feeding. Therefore, in this study we have investigated the transfer of dietary gT into salmon. To this end, fish were fed a diet supplemented with 170 ppm gT for 16 weeks whereby alpha tocopherol levels were adjusted to 190 ppm in this and the control diet. Feeding gT-rich diets resulted in a three-fold increase in gT concentrations in the liver and fillet compared to non-gT-supplemented controls. Tissue alpha tocopherol levels were not decreased indicating no antagonistic interaction between gamma- and alpha tocopherol in salmon. The concentration of total omega 3 fatty acids slightly increased in response to dietary gT. Furthermore, dietary gT significantly decreased malondialdehyde in the fillet, determined as a biomarker of lipid peroxidation. In the liver of gT fed salmon we observed an overall down-regulation of genes involved in lipid homeostasis. Additionally, gT improved the antioxidant capacity by up-regulating Gpx4a gene expression in the pyloric caeca. We suggest that Atlantic salmon may provide a marine functional source capable of enriching gT for human consumption.

Redesign of soluble fatty acid desaturases from plants for altered substrate specificity and double bond position

Acyl-acyl carrier protein (ACP) desaturases introduce double bonds at specific positions in fatty acids of defined chain lengths and are one of the major determinants of the monounsaturated fatty acid composition of vegetable oils. Mutagenesis studies were conducted to determine the structural basis for the substrate and double bond positional specificities displayed by acyl-ACP desaturases. By replacement of specific amino acid residues in a Δ6-palmitoyl (16:0)-ACP desaturase with their equivalents from a Δ9-stearoyl (18:0)-ACP desaturase, mutant enzymes were identified that have altered fatty acid chain-length specificities or that can insert double bonds into either the Δ6 or Δ9 positions of 16:0- and 18:0-ACP. Most notably, by replacement of five amino acids (A181T/A200F/S205N/L206T/G207A), the Δ6-16:0-ACP desaturase was converted into an enzyme that functions principally as a Δ9-18:0-ACP desaturase. Many of the determinants of fatty acid chain-length specificity in these mutants are found in residues that line the substrate binding channel as revealed by x-ray crystallography of the Δ9-18:0-ACP desaturase. The crystallographic model of the active site is also consistent with the diverged activities associated with naturally occurring variant acyl-ACP desaturases. In addition, on the basis of the active-site model, a Δ9-18:0-ACP desaturase was converted into an enzyme with substrate preference for 16:0-ACP by replacement of two residues (L118F/P179I). These results demonstrate the ability to rationally modify acyl-ACP desaturase activities through site-directed mutagenesis and represent a first step toward the design of acyl-ACP desaturases for the production of novel monounsaturated fatty acids in transgenic oilseed crops.