Numerical simulation of a radial diffuser turbulent airflow

In the present work are presented results from numerical simulations performed with the ANSYS-CFX (R) code. We have studied a radial diffuser flow case, which is the main academic problem used to study the flow behavior on flat plate valves. The radial flow inside the diffuser has important behavior such as the turbulence decay downstream and recirculation regions inside the valve flow channel due to boundary layer detachment. These flow structures are present in compressor reed valve configurations, influencing to a greater extent the compressor efficiency. The main target of the present paper was finding the simulation set-up (computational domain, boundary conditions and turbulence model) that better fits with experimental data published by Tabatabai and Pollard. The local flow turbulence and velocity profiles were investigated using four different turbulence models, two different boundary conditions set-up, two different computational domains and three different flow conditions (Re-in - Reynolds number at the diffuser inlet). We used the Reynolds stress (BSL); the k-epsilon; the RNG k-epsilon; and the shear stress transport (SST) k-omega turbulence models. The performed analysis and comparison of the computational results with experimental data show that the choice of the turbulence model, as well as the choice of the other computational conditions, plays an important role in the results physical quality and accuracy. (c) 2007 Elsevier B.V. All rights reserved.

Proposta metodológica para avaliação de controlador automático de seções e pulverização

Na aplicação de produtos fitossanitários, a utilização de equipamentos que controlam automaticamente as seções da barra e a pulverização já é realidade; entretanto, ainda não há resultados que demonstrem a sua eficácia. Por esse motivo, este trabalho teve por finalidade desenvolver uma metodologia para a avaliação de um equipamento que controla automaticamente as seções e a pulverização. Avaliou-se um controlador automático de seções e pulverização de mercado, e, para tanto, foram utilizados três níveis de acurácia do sinal de GPS (algoritmo interno, SBAS e RTK), três ângulos para a simulação de entrada e saída da barra de pulverização em relação à borda do talhão (0; 45 e 60º ) e três velocidades de trabalho (1,66; 5,00 e 8,33 m s-1). A metodologia proposta possibilitou a determinação dos tempos e distâncias de abertura e fechamento das seções. Os coeficientes de variação para os tempos e distâncias de abertura e fechamento das seções indicaram uma variação considerável. Houve interações significativas em função do tipo de sinal de GPS. A configuração recomendada pelo fabricante e adotada para a avaliação do controlador automático de seções e pulverização não atende a todas as situações simuladas.

Fermentation and epiphytic microflora dynamics in sugar cane silage

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo morfológico do funículo espermático em ovinos da raça Corriedale (Ovis aries, L. 1758)

Estudamos em 40 ovinos adultos da raça Corriedale os aspectos histológicos do funículo espermático. Observamos que este se acha envolvido por uma cápsula de tecido conjuntivo fibroelástico denso, de espessura variável, pregueada em alguns pontos, e revestida por mesotélio que circunda todo o conjunto vásculo-nervoso, e projeta-se para formar o mesoducto deferente. em posição subcapsular, verifica-se uma camada de tecido conjuntivo fibroelástico frouxo, de espessura variável, que circunda parcialmente o funículo espermático, isolando nas regiões deferencial e abdeferencial conjuntos vásculo-nervosos, responsáveis pela nutrição do epidídimo. Na região do mesoducto deferente, o tecido subcapsular acompanhado de tecido adiposo constitui a camada interna deste meso, formando a sua adventícia e abrigando vasos e nervos deferenciais. Na região abdeferencial, pequenos acúmulos de tecido adiposo são vistos de permeio aos vasos e nervos desta região. Entre as artérias, veias e nervos testiculares, bem como entre os vasos das regiões deferencial e abdeferencial, observa-se o tecido conjuntivo denso, intervascular, rico em fibras elásticas, que constitui as adventícias contínuas destes vasos. O arranjo vascular mostra que o segmento da artéria testicular, contido no funículo espermático, apresenta trajeto sinuoso. Estando envolvido pelo plexo venoso pampiniforme, formado por veias testiculares desprovidas de válvulas de calibres variados, apresentando amplas comunicações entre si. As veias responsáveis pela drenagem do epidídimo e ducto deferente estão localizadas em posição subcapsular deferencial e abdeferencial e mostram-se providas de válvulas. O trato das artérias testiculares no funículo espermático apresenta como comprimento médio, máximo e mínimo, respectivamente, 150,4 cm, 198,0 cm e 73,3 cm, à direita, e 149,6 cm, 189,2 cm e 90,0 cm, à esquerda, não existindo diferenças estatisticamente significantes ao nível de 5%, quando comparamos a média do segmento da artéria testicular contida no funículo espermático direito em relação ao esquerdo.

Colonization of a 'Lost World': Encrustation patterns in modern subtropical brachiopod assemblages.

The encrustation of Paleozoic rhynchonelliform brachiopods has been studied for decades, but modern brachiopods have not received similar scrutiny. The discovery of abundant subtropical brachiopods from the Southeast Brazilian Bight provides an unprecedented opportunity to assess epibiont abundance, diversity, and encrustation patterns in modern brachiopod assemblages. Across the outer shelf, encrustation frequencies vary among taxa, from mean values of 0.45% for Platidia to 9.3% for Argyrotheca. Encrustation frequencies for Bouchardia increase from 1.6% on the outer shelf to 84% on the inner shelf Larger valves are encrusted more frequently, and epibionts preferentially colonize valve interiors. Increased encrustation on the inner shelf may reflect the greater surface area of larger hosts, longer exposure of dead shells, water-mass characteristics, sedimentation rates, productivity, or other factors that vary with depth. Inner-shelf brachiopods exhibit encrustation frequencies comparable to those reported for epifaunal bivalves. The epibiont fauna is dominated by bryozoans and serpulids, with minor roles played by spirorbids, bivalves, barnacles, foraminifera, algae, and other taxa. Epibiont abundance at each site is highly variable, but sites are similar in rank importance of epibiont taxa. A different suite of epibionts colonized Paleozoic brachiopods, but similar patterns of encrustation have been observed, including preferential settlement according to valve morphology. These results provide a baseline for evaluating the encrustation of modern bivalves and ancient brachiopods, and may elucidate the macroevolutionary history of epibionts and their relationship to their hosts.

Biotic interactions recorded in shells of recent rhynchonelliform brachiopods from San Juan Island, USA

Biotic interactions between brachiopods and spionid polychaete worms, collected around San Juan Islands (USA), were documented using observations from live-collected individuals and traces of bioerosion found in dead brachiopod shells. Specimens of Terebratalia tranversa (Sowerby), Terebratulina unguicula (Carpenter), Laqueus californianus (Koch), and Hemithiris psittacea (Gmelin) were collected from rocky and muddy substrates, from sites ranging from 14.7-93.3 m in depth. Out of 1,131 specimens, 91 shells showed traces of bioerosion represented by horizontal tubes. Tubes are U-shaped, straight or slightly curved, sometimes branched, with both tube openings communicating externally. on internal surfaces of infested shells, blisters are observed. All brachiopod species yielded tubes, except for H. psittacea. Tubes are significantly more frequent on live specimens, and occur preferentially on larger, ventral valves. This pattern suggests selectivity by the infester rather than a taphonomic bias. Given the mode of life of studied brachiopods (epifaunal, sessile, attached to the substrate, lying on dorsal valve), ventral valves of living specimens should offer the most advantageous location for suspension-feeding infesters. Frequent infestation of brachiopods by parasitic spionids is ecologically and commercially noteworthy because farmed molluscs are also commonly infested by parasitic polychaetes. In addition, brachiopod shells are among the most common marine macroscopic fossils found in the Phanerozoic fossil record. From a paleontological perspective, spionid-infested brachiopod shells may be a prime target for studying parasite-host interactions over evolutionary time scales.

On-line determination of Sb(III) and total Sb using baker's yeast immobilized on polyurethane foam and hydride generation inductively coupled plasma optical emission spectrometry

The yeast Saccharomyces cerevisiae was immobilized in cubes of polyurethane foam and the ability of this immobilized material to separate Sb(III) and Sb(V) was investigated. A method based on sequential determination of total Sb (after on-line reduction of Sb(V) to Sb(III) with thiourea) and Sb(Ill) (after on-line solid-liquid phase extraction) by hydride generation inductively coupled plasma optical emission spectrometry is proposed. A flow system assembled with solenoid valves was used to manage all stages of the process. The effects of pH, sample loading and elution flow rates on solid-liquid phase extraction of Sb(III) were evaluated. Also, the parameters related to online pre-reduction (reaction coil and flow rates) were optimized. Detection limits of 0.8 and 0.15 mu g L-1 were obtained for total Sb and Sb (III), respectively. The proposed method was applied to the analysis of river water and effluent samples. The results obtained for the determination of total Sb were in agreement with expected values, including the river water Standard Reference Material 1640 certified by the National Institute of Standards and Technology (NIST). Recoveries of Sb(III) and Sb(V) in spiked samples were between 81 19 and I I I 15% when 120 s of sample loading were used. (c) 2006 Elsevier B.V. All rights reserved.

A neural approach for determination of global energetic efficiency indicator in groundwater wells

In most of the cases, the systems of water distribution from groundwater wells use electrical submersible pumps. All electrical energy is applied to the pumps; however, other components (pipes, valves, etc.) of these systems are also responsible by the higher or lower consumption of electric energy. The supervisors and operators of the systems should thus have knowledge of the global energetic behavior of the process in order to administrate it properly. This work suggests a 'Global Energetic Efficiency Indicator' for groundwater wells by using mathematical equations and neural networks. Simulation results will be presented in order to demonstrate the validity of the proposed approach.

ANATOMIC OBSERVATIONS OF THE CORONARY SINUS IN THE DOG (CANIS-FAMILIARIS)

The coronary sinus was investigated in 34 normal adult dogs, in order to verify its formation, tributaries, length and the valves, as well as the relationship of the venous walls to the epicardium and to the myocardium. The valve of the coronary sinus was observed in only 4 cases (1.7 %). In 30 cases (98.3 %) the ostium of the coronary sinus was lacking a valve. The valve of Vieussens double, was found at the level of the transition between the great cardiac vein and the coronary sinus, as well as others parietal venous valves. A comparison with the human pattern was made, particularly regarding the action of the valve of the coronary sinus and the formation of the sinus.

Effects of ion beam on nanoindentation characteristics of glassy polymeric carbon surface

Glassy polymeric carbon (GPC) is a useful material for medical applications due to its chemical inertness and biocompatible characteristics. Mitral and aortic and hydrocephalic valves are examples of GPC prosthetic devices that have been fabricated and commercialized in Brazil. In this work, ion beam was used to improve the mechanical characteristics of GPC surface and therefore to avoid the propagation of microcracks where the cardiac valves are more fragile. A control group of phenolic resin samples heat-treated at 300, 400, 700, 1000, 1500, and 2500 degrees C was characterized by measuring their hardness and Young's reduced elastic modulus with the depth of indentation. The control group was compared to results obtained with samples heat-treated at 700, 1000, and 1500 degrees C and bombarded with energetic ions of silicon, carbon, oxygen, and gold at energies of 5, 6, 8, and 10 MeV, respectively, with fluences between 10x10(13) and 10x10(16) ions/cm(2). GPC nonbombarded samples showed that hardness depends on the heat treatment temperature (HTT), with a maximum hardness for heat treatment at 1000 degrees C. The comparison between the control group and bombarded group also showed that hardness, after bombardment, had a greater increase for samples prepared at 700 degrees C than for samples prepared at higher temperatures. The Young's elastic modulus presents an exponential relationship with depth. The parameters obtained by fitting depend on the HTT and on the ion used in the bombardment more than on energy and fluence. The hardness results show clearly that bombardment can promote carbonization, increase the linkage between the chains of the polymeric material, and promote recombination of broken bonds in lateral groups that are more numerous for samples heat-treated at 700 degrees C. (c) 2004 Elsevier B.V. All rights reserved.

Conchostráceos com linhas de crescimento recurvadas junto à margem dorsal (famílias Palaeolimnadiopseidae e Perilimnadiidae) da formação rio do rasto, Permiano superior, bacia do Paraná, Brasil

Some Upper Permian conchostracans from the Rio do Rasto Formation (Parana Basin, South Brazil) have very characteristic recurved growth lines at the dorsal margin. All previously described specimens were classified as Palaeolimnadiopsis subalata (Reed) Raymond. However, a re-analysis of these fossils and of additional recently- collected specimens demonstrated that not all can be included in a single species, nor only in the Family Palaeolimnadiopseidae. According to their shape and the size of the umbo, they are classified into three species. The sub-elliptic carapaces with small anterior umbo are maintained in Palaeolimnadiopsis subalata (Reed, 1929) Raymond, 1946. The sub-circular carapaces with small sub-central umbo correspond to the new species Palaeolimnadiopsis riorastensis. The small size of the umbo is a character of the Family Palaeolimnadiopseidae. The small elliptic valves with large anterior umbo are assigned to the new species Falsisca brasiliensis of the Family Perilimnadiidae, which is characterized by large umbos. Palaeolimnadiopsis has a wide chronostratigraphic distribution, but Falsisca is restricted to the Upper Permian-Lower Triassic of Europe and Asia. This interval is in agreement with the probable Late Permian age of the respective strata of the Rio do Rasto formation. Falsisca was not previously recorded in Gondwana.

Observations anatomiques concernant la valve atrioventricuiaire gauche humaine

30 hearts of male and female, white and non-white Brazilians of different ages were studied. The leaflets of the left atrioventricular valves were removed near the fibrous ring and anatomically studied under chirurgical microscope. The authors observed: the leaflet's shape, the presence of commissures, the implantation manner of the chordae tendineae and the distribution on the leaflets. Special attention was concentrated on the terminology used by different authors for the structures of the 'mitral complex'.

Anatomic data of the human coronary sinus

The authors studied the formation, tributaries, lenght and the ostium of the coronary sinus, as well as the relationship of the venous walls to the myocardium and to the epicardium. The observations were made out of 143 hearts of subjects of different ages, and it was found that the most frequent display of the coronary sinus valve was a semilunar form (52 adults, 15 youngsters, 2 children, 3 newborn); it was also found valves in a cribiform or septal form. The absence of the valve of coronary sinus was noted in 53 cases (42 adults, 9 youngsters, 2 newborn). The valve of Vieussens was found, in some cases, at the level of the transition between the great cardiac vein and the coronary sinus, as well as others single or double parietal venous valves. The action of the valve of coronary sinus is also discussed by the authors.

Tafonomia de Pelecípodes da Formação Teresina (Permiano), Tiaraju, RS, Brasil

Taphonomic analysis of pelecypod concentration in the part of the Teresina Formation (Passa Dois Group), Tiaraju region, State of Rio Grande do Sul, indicates its origins as due to high energy events (storms). The fauna include shallow-burrowing suspensivorous species, associated with this byssate semi-infauna species. Several taphonomic characteristics indicate that the fossiliferous assemblage was subject to little selective processes during transportation. These are: predominance of disarticulated valves (although articulated valves are frequent) and perpendicular, oblique, concordant and nested arrangement of bioclasts in the sedimentary matrix. Absence of fragmentation, bioerosion and incrustation of the bioclasts, suggest fast burial of shells due to high sedimentation rate events. Diagenetic features, indicate that the fossils were later submitted to refossilization and mixing with other non-coeval bioclasts, resulting in some degree of time-averaging.

Coeficientes de perda de carga em valvulas e acessorios no escoamento laminar de fluidos nao-Newtonianos

Friction loss coefficients for laminar flow of xantan gum solutions (concentrations in the range of 0.1-0.5% by weight) through valves and fittings were experimentally determined. The rheological behavior, studied by means of a concentric cylinder rheometer, was pseudoplastic, being well described by the Ostwald-De Waele model with non-linear correlation coefficients (r) between 0.998 and 0.999. In the pressure drop measurements the following fittings were employed: completely open and half way open ball valve, completely open and half way open angle valve, tee used like coupling, tee used like a 90° elbow, short radius 90° elbow and coupling. The results showed that the friction loss coefficients increased with decreasing generalized Reynolds number. The friction loss coefficients could be well adjusted by a potential model, suggested by Kittredge & Rowley (1957) for Newtonian fluids, K f = A(Re g) -B, with correlation coefficients between 0.837 and 0.999.