Characterization of decamethylferrocene and ferrocene in ionic liquids : Argon and vacuum effect on their electrochemical propertiesce

The electrochemistry of decamethylferrocene (DmFc) has been studied in organic solvent systems and proven to be a superior internal reference redox standard to ferrocene (Fc). However, the electrochemical information on this redox couple in ionic liquids is still limited. Therefore, the voltammetric and amperometric behaviour of DmFc was investigated under argon and vacuum conditions in six different ionic liquids and compared to that of Fc under the same experimental conditions. Consequently, the concentration, the heterogeneous electron-transfer rate constant (k0), volatility, and diffusion coefficients (D) of Fc and Fc+, as well as the solubility, k 0, and D values for DmFc and DmFc+ were determined under argon and vacuum conditions by fitting the experimental chronoamperometric and voltammetric data with numerical and digital simulations. The rate of mass transport of ferrocene and decamethylferrocene was observed to decreases between 6-37% by changing the working atmosphere from argon to vacuum. The D Fc/DFc+ ratios are in the range 1.31-2.01 in the different ILs. Importantly, the DDmFc/DDmFc+ ratio is ≈ 1 in 1-methyl-3-butylimidazolium bis(trifluoromethylsulfonyl)amide, 1-methyl-1-butylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate, and 1-methyl-3-ethylimidazolium tris(pentafluoroethyl)trifluorophosphate. The experimental mid-point potential and half-wave potential of Fc0/+ vs. DmFc0/+, as well as the formal potential obtained after correction for inequality in the respective diffusion coefficients of both redox processes are presented. Even though DmFc is not freely soluble in the different ILs, the results presented in this work suggest that the DmFc0/+ redox process is less dependent than Fc on the IL nature. This is a very relevant finding for the application of this transition-metal sandwich complex as an internal reference redox system in IL solutions. © 2014 Elsevier Ltd.

Investigations into hydrodynamics and heat transfer in vacuum fluidised beds.

Investigations into vacuum fluidised beds has improved understanding of heat transfer and hydrodynamics which will enable optimization of various industrial processes. Significant contributions were made in theoretical and experimental analysis.

Hydrodynamic Simulations Of Vacuum-Driven Storage Tanks

As a result of urbanization, stormwater runoff flow rates and volumes are significantly increased due to increasing impervious land cover and the decreased availability of depression storage. Storage tanks are the basic devices to efficiently control the flow rate in drainage systems during wet weather. Presented in the paper conception of vacuum-driven detention tanks allows to increase the storage capacity by usage of space above the free surface water elevation at the inlet channel. Partial vacuum storage makes possible to gain cost savings by reduction of both the horizontal area of the detention tank and necessary depth of foundations. Simulation model of vacuum-driven storage tank has been developed to estimate potential profits of its application in urban drainage system. Although SWMM5 has no direct options for vacuum tanks an existing functions (i.e. control rules) have been used to reflect its operation phases. Rainfall data used in simulations were recorded at raingage in Czestochowa during years 2010÷2012 with time interval of 10minutes. Simulation results gives overview to practical operation and maintenance cost (energy demand) of vacuum driven storage tanks depending of the ratio: vacuum-driven volume to total storage capacity. The following conclusion can be drawn from this investigations: vacuum-driven storage tanks are characterized by uncomplicated construction and control systems, thus can be applied in newly developed as well as in the existing urban drainage systems. the application of vacuum in underground detention facilities makes possible to increase of the storage capacity of existing reservoirs by usage the space above the maximum depth. Possible increase of storage capacity can achieve even a few dozen percent at relatively low investment costs. vacuum driven storage tanks can be included in existing simulation software (i.e. SWMM) using options intended for pumping stations (including control and action rules ).

Vacuumless kink systems from vacuum systems: An example

Some years ago, Cho and Vilenkin, introduced a model which presents topological solutions, despite not having degenerate vacua as is usually expected. Here we present a new model with topological defects, connecting degenerate vacua but which in a certain limit recovers precisely the one proposed originally by Cho and Vilenkin. In other words, we found a kind of parent model for the so called vacuumless model. Then the idea is extended to a model recently introduced by Bazeia et al. Finally, we trace some comments the case of the Liouville model.

Vacuum effects on massive spinor fields: S-1 x R-3 topology

The aim of this work was to investigate the role played by an external field on the Casimir energy density for massive fermions under S-1 x R-3 topology. Both twisted- and untwisted-spin connections are considered and the calculation in a closed form is performed using an alternative approach based on the combination of the analytic regularization method and the Euler-Maclaurin summation formula. It is shown that no mass scale appears in the final result and, therefore, Casimir effect arises only from the boundary conditions and vacuum fluctuations induced by the coupling with the external field.

Fermions bounded by kinks of false vacuum models

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Calculation of the vacuum pressure gradient in field emission displays

The usual design of field-emission displays (FEDs) often results in high vacuum pressure gradients inside the glass plates of the device, and this is the main limitation to the widespread availability of large area FEDs. In this paper, we perform theoretical calculations using the finite element method for determining the pressure distributions in several pumping configurations, including a new FED configuration known as porous FED or pFED. The approach here is capable of clarifying the design issues influencing the final pressure relevant to the field-emission display devices. (C) 2001 Elsevier B.V. B.V. All rights reserved.

INFLUENCE of ENCAPSULATING MATERIALS on WATER SORPTION ISOTHERMS of VACUUM-DRIED PERSIMMON PULP POWDER

Water sorption isotherms for vacuum-dried persimmon pulp (PP) powder were determined in the temperature range of 20-50C, and the effects of maltodextrin (MD) or gum arabic (GA) addition on the water sorption behavior of the dried powders were analyzed. Several models were evaluated to fit the experimental data and the Guggenheim-Anderson-de Boer model was selected as the most adequate to describe the observed behavior. Addition of encapsulants affected the isotherms: at the same water activity, PP powder with added GA (PP + GA) or MD (PP + MD) presented lower equilibrium water content than pure PP and were less affected by temperature variations. Samples of PP + MD presented lower equilibrium moisture content than those of PP + GA. The isosteric heats of sorption of pulp powders with encapsulants were higher (less negative) than those of PP, suggesting that there are more active polar sites in PP than in pulp powder containing encapsulants.PRACTICAL APPLICATIONSThe choice of persimmon to carry out this work was due to the large persimmon production available in Brazil; moreover, persimmon pulp is rich in vitamin C, vitamin A and iron, as well as in phenolic compounds. Drying of fruit pulps with high sugar content presents technical difficulties because the hygroscopicity and thermoplasticity of the resulting powders when exposed to high temperature and relative humidity. For this reason, addition of high-molar-mass biopolymers, such as maltodextrin or gum arabic, is a strategy to aid drying and to improve storage stability. Knowledge of water sorption isotherms and net isosteric heats of sorption is important to various food processing operations, including drying, storage and packaging. They are useful in calculating time and energy consumptions during drying, modeling moisture changes during storage and predicting shelf life of food products.

Effects of vacuum structure on neutron star

We study the equation of state for neutron matter using the Walecka model including quantum corrections for baryons and sigma mesons through a realignment of the vacuum. We next use this equation of state to calculate the radius, mass and other properties of rotating neutron star.

Do static sources respond to massive scalar particles from the Hawking radiation as uniformly accelerated ones do in the inertial vacuum?

We examine the recently found equivalence for the response of a static scalar source interacting with a massless Klein-Gordon field when the source is (i) static in Schwarzschild spacetime, in the Unruh vacuum associated with the Hawking radiation, and (ii) uniformly accelerated in Minkowski spacetime, in the inertial vacuum, provided that the source's proper acceleration is the same in both cases. It is shown that this equivalence is broken when the massless Klein-Gordon field is replaced by a massive one.

QCD vacuum topology and glueballs

We outline a comprehensive study of spin-0 glueball properties which, in particular, keeps track of the topological gluon structure. Specifically, we implement (semi-hard) topological instanton physics as well as topological charge screening in the QCD vacuum into the operator product expansion (OPE) of the glueball correlators. A realistic instanton size distribution and the (gauge-invariant) renormalization of the instanton contributions are also implemented. Predictions for 0(++) and 0(-+) glueball properties are presented.

Vacuum polarization effects in hyperon-rich dense matter - a nonperturbative treatment

We derive the equation of state (EOS) for electrically charged neutral dense matter using the quantum hadrodynamics (QHD) model. This is carried out in a non-perturbative manner including quantum corrections for baryons through a realignment of vacuum with baryon-antibaryon condensates. This yields the results of relativistic Hartree approximation of summing over baryonic tadpole diagrams. The quantum corrections from the scalar meson is also taken into account in a similar way. This leads to a softening of the EOS for the hyperonic matter. The formalism also allows Lis to make a self-consistent calculation of the in-medium sigma meson mass. The effects of such quantum corrections on the composition of charged neutral dense matter is considered. The effect of the resulting EOS on the structure of neutron stars is also studied.

Coulomb gauge quark model, vacuum condensates and high density quark matter

We consider here a Coulomb gauge quark model which includes an explicit construct for a nontrivial vacuum structure in QCD at finite density. Non-perturbative renormalization of ultraviolet diverges is performed by adding counterterms. The equation of state for u and d quark matter at zero temperature is calculated in the Hartree-Fock approximation.