Electrical switching studies on the thin films of polyfuran and polyacrylonitrile prepared by plasma polymerisation and vacuum evaporated amorphous silicon

This thesis Entitled Electrical switching studies on the thin flims of polyfuran and polyacrylonitrile prepared by plasma polymerisation and vacuum evaporated amorphous silicon.A general introduction to the switching and allied phenomena is presented. Subsequently, developments of switching in thin films are described. The Mott transition is qualitatively presented. The working of a switching transitor is outlined and compared to the switching observed in thin films. Characteristic parameters of switching such as threshold voltage, time response to a, voltage pulse, and delay time are described. The various switching configurations commonly used are discussed. The mechanisms used to explain the switching behaviour like thermal, electrothermal and purely electronic are reviewed. Finally the scope, feasibility and the importance of polymer thin films in switching are highlighted.

Elecrical conduction and dielectric behaviour of thin films of vacuum evaporated amorphous silicon, hydrogenated amorphous silicon and chemically deposited cadmium sulphide

A brief account of the several methods used for the production of thin films is presented in this Chapter. The discussions stress on the important methods used for the fabrication of a-si:H thin films. This review' also reveals ‘that almost all the general methods, like vacuum evaporation, sputtering, glow discharge and even chemical methods are currently employed for the production of a-Si:H thin films. Each method has its own advantages and disadvantages. However, certain methods are generally preferred. Subsequently a detailed account of the method used here for the preparation of amorphous silicon thin films and their hydrogenation is presented. The metal chamber used for the electrical and dielectric measurements is also described. A brief mention is made-on the electrode structure, film area and film geometry.

Bio-chemical changes associated with processing of shell fishes and flavour constituents of body meat and claw meat'of crab

In this thesis all these aspects are taken into consideration. Extensive studies were conducted on all aspects of processing of crabs, mussels and clams. The species taken for studies are commercially used ones namely Scylla sereta, perna viridis, and villorita cyprinoids. In Chapter 4.1 with regard to crab) the following aspects on their handling and processing are reported seasonal variation of chemical constituents, changes taking place during ice storage, freezing, canning etc. In Chapter 4._2 with regard to mussel, the relation between age (size) and chemical constituents, changes taking place during ice storage, freezing, canning etc. are reported and in Chapter 4.3 the changes taking place in clam muscle during icing and freezing are reported and the ame rebility of ice stored clams for canning purpose is reported.The interference of high concentration of glycogen in mussel and clam muscles during the colour development of ribose (Me-jbaum's method) is observed and remedial step are taken to minimise the interference.

Behaviour of mrigal (cirrihinus mrigala) meat components during the washing process in the preparation of surimi

To elucidate the effect of washing, on flesh components, mrigal flesh was washed through one, two and three washing cycles. Washing resulted in absorption of water (1-3%) and loss of fat (49%). 35% loss of soluble protein (SP) was noticed in the first washing itself and the loss is almost equally shared by the sarcoplasmic (18% of SP) and the myofibrillar proteins (17% of SP). The subsequent washings removed small portions of water-soluble sarcoplasmic proteins resulting in the concentration of myofibrillar proteins. 73% of the soluble protein was retained in the flesh after three washing cycles. The protein had undergone marginal conformational changes as reflected by the decrease in the actomyosin Ca super(2+) ATPase activity The rheological properties of the washed flesh were,however, significantly better than that of the unwashed mince

Ions of the superheavy elements in vacuum and in solution

The extension of the Periodic Table into the range of unknown atomic numbers of above one hundred requires relativistic calculations. The results of the latter are used to indicate probable values for X-ray transition lines which will be useful for identification of the atomic species formed during collision between accelerated ions and the target. If the half-lives of the isotopes are long, then the chemistry of these new species becomes an important question which is reviewed for E110, E 111 and E112. The possible structural chemistry of the elements E108 to E112 is suggested. Finally the effects of solvation on ions of the actinide and superheavy elements have been studied.

Meat yield and quality of Tanzania Shorthorn Zebu cattle finished on molasses/maize grain with agro-processing by-products in 90 days feedlot period

This study was conducted to evaluate the effects of feeding molasses or maize grain with agro-processing by-products on yield and quality of meat from Tanzania shorthorn zebu (TSZ) cattle. Forty five steers aged 2.5 to 3.0 years with 200 +/- 5.4 kg body weight were allocated into five dietary treatments namely hominy feed with molasses (HFMO), rice polishing with molasses (RPMO), hominy feed with maize meal (HFMM), rice polishing with maize meal (RPMM) and maize meal with molasses (MMMO). Ad libitum amount of each dietary treatment and hay were offered to nine steers for 90 days. Cooking loss (CL) and Warner Bratzler shear force (WBSF) values were determined on M. longissimus thoracis et lumborum aged for 3, 6, 9 and 12 days. Steers fed on HFMO diet had higher (P < 0.05) nutrient intake (86.39 MJ/d energy; 867 g/d CP), weight gain (919 g/d) and half carcass weight (75.8 kg) than those fed other diets. Meat of steers from all diets was tender with average WBSF values of 47.9 N cm^(−2). The CL (22.0 +/- 0.61%) and WBSF (53.4 +/- 0.70 N cm^(−2)) were highest in meat aged for 3 days followed by 6, 9 and 12 days. WBSF values for meat aged for 9 and 12 days from steers fed HFMO and RPMM diets were similar and lower than those on other dietary treatments x aging periods. Overall, molasses and hominy feed can be used to replace maize meal in feedlot finishing diets to spare its use in animal feeds.

Effect of magnesium sulphate and L-tryptophan and genotype on the feed intake, behaviour and meat quality of pigs

Sixty-nine entire male pigs with different halothane genotype (homozygous halothane positive – nn-, n=36; and homozygous halothane negative – NN-, n=33) were fed with a supplementation of magnesium sulphate (Mg) and/or L-tryptophan (Trp) in the diet for 5 days before slaughter. Animals were housed individually and were submitted to stressful ante mortem conditions (mixed in the lorry according to treatments and transported 1h on rough roads). Individual feed intake was recorded during the 5-day treatment. At the abattoir, pig behaviour was assessed in the raceway to the stunning system and during the stunning period by exposure to CO2. Muscle pH, colour, water holding capacity, texture and cathepsin activities were determined to assess meat quality. The number of pigs with an individual feed intake lower than 2kg/day was significantly different among diets (P<0.05; Control: 8.7%; Mg&Trp: 43.5%; Trp: 17.4%) and they were considered to have inadequate supplement intake. During the ante mortem period, 15.2% of pigs included in the experiment died, and this percentage decreased to 8.7% in those pigs with a feed intake > 2kg/day, all of them from the stress-sensitive pigs (nn). In general, no differences were observed in the behaviour of pigs along the corridor leading to the stunning system and inside the CO2 stunning system. During the stunning procedure, Trp diet showed shorter periods of muscular excitation than control and Mg&Trp diets. The combination of a stressful ante mortem treatment and Mg&Trp supplementation led to carcasses with high incidence of severe skin lesions. Different meat quality results were found when considering all pigs or considering only those with adequate supplement intake. In this later case, Trp increased pH45 (6.15) vs Control diet (5.96) in the Longissimus thoracis (LT) muscle (P<0.05) and pH at 24h (Trp: 5.59 vs C: 5.47) led to a higher incidence of dark, firm and dry (DFD) traits in SM muscle (P<0.05). Genotype affected negatively all the meat quality traits. Seventy-five percent of LT and 60.0% of the SM muscles from nn pigs were classified as pale, soft and exudative (PSE), while none of the NN pigs showed these traits (P<0.0001). No significant differences were found between genotypes on the incidence of DFD meat. Due to the negative effects observed in the Mg&Trp group in feed intake and carcass quality, the utilization of a mixture of magnesium sulphate and tryptophan is not recommended

Effect of supplementation with MgCO3 and L-tryptophan on the welfare and on the carcass and meat quality of two halothane pig genotypes (NN and nn)

Sixty-one animals with different Halothane genes (homozygous halothane positive, n=34; and homozygous halothane negative, n=27) were fed with three diets (controlgroup, with no supplement; magnesium (Mg) group with 1.28g MgCO3/kg and tryptophan (Trp) group with 5g L-Trp/kg) during the last 5 days before slaughter. Animals were submitted to minimal stress ante mortem conditions. Pig behaviour was recorded at the experimental farm, raceway to the CO2 stunning system and during the stunning period. Corneal reflexes were recorded after stunning as well. There were no differences in feed intake among diets (p>0.05) during the 5 days of treatment. The halothane positive (nn) group had lower intake than the halothane negative (NN) group (p<0.01). The behaviour of the pigs in the raceway did not differ (p>0.05) among treatments or halothane genotype. A significant (p<0.001) interaction diet*halothane was found in the time to appear the first retreat attempt during the exposure to the CO2 system. In the nn group, the time of performing the first retreat attempt was later in the Mg (p<0.05) than the Control group. Moreover, in the Mg group, the nn had a later (p<0.05) first retreat attempt than the NN. Thus, Mg supplementation could have a positive effect on welfare of nn pigs. The nn had a lower proportion of animals that showed corneal reflexes after stunning than NN, indicating a higher effectiveness of the stunning method in nn pigs. Neither Mg nor Trp affected carcass quality and meat quality parameters, although significant differences were found between genotypes

Modificaciones tecnológicas para mejorar la seguridad y calidad del jamón curado

Se introdujeron varias modificaciones tecnológicas en la elaboración habitual del jamón curado español de cerdo blanco para mejorar su seguridad y calidad, así como para investigar la contribución relativa de los diversos procesos implicados en la calidad sensorial. Las modificaciones introducidas en cada uno de 3 experimentos (a, b, c) fueron: a) inoculación de un cultivo iniciador (CI) en la superficie del producto y el envasado del jamón al vacío durante la etapa de reposo (EV); b) aplicación de una atmósfera modificada con un contenido reducido de oxígeno (AMCRO) (durante la totalidad o la última parte del procesado) en dos procesos que diferían en las humedades relativas aplicadas; c) realización de un estufaje de 4 días a 35ºC y la aplicación repetida de pequeñas cantidades de grasa dorsal líquida sobre la superficie del jamón. En cada experimento, se siguió un diseño experimental de bloques incompletos para bloquear y evaluar el efecto de la materia prima en cada parámetro. La aplicación del CI evitó el crecimiento superficial de hongos, pero modificó el flavor del producto, dando lugar a la aparición de flavores impropios del jamón tradicional, al aumento de la incidencia de la coquera y a la reducción de la intensidad de notas características del mismo como el flavor añejo. Estos efectos fueron debidos a la acción directa del CI pero probablemente también a los cambios que provocó en la superficie del jamón, como la atenuación del "sudado" del jamón. El EV trajo consigo una reducción del crecimiento superficial de mohos; un mayor gradiente de humedad entre el interior y el exterior del jamón; una disminución de la pérdida de peso; un aumento del nitrógeno no proteico y cambios negativos en la textura, aspecto y flavor, como el aumento de la intensidad del velo blanco y del flavor a pienso, el aumento de la incidencia de la coquera y la atenuación del flavor añejo. Estos efectos fueron consecuencia del mayor contenido de humedad a que dio lugar dicha modificación tecnológica, de la potenciación de los efectos negativos del uso del CI, así como a los cambios que provocó en la superficie del jamón. El uso de una ACRO durante todo el proceso provocó un aumento del nitrógeno no proteico, una disminución de la concentración de óxidos de colesterol, un aumento de la intensidad del velo blanco y, en combinación con el uso de humedades relativas bajas, causó una disminución del crecimiento bacteriano y evitó el crecimiento de hongos, levaduras y ácaros en el interior y exterior del jamón y el desarrollo de la coquera. Asímismo, dio lugar a una drástica reducción de la intensidad del flavor del jamón debido a la disminución de la intensidad de la oxidación lipídica. Cuando esta ACRO se aplicó únicamente al final del proceso, se consiguió la eliminación de las formas móviles de los ácaros y la disminución de la intensidad de la coquera y el producto resultante poseía un flavor algo más intenso que aquél sometido a una ACRO durante todo el proceso. El aumento de la temperatura de 25-27 ºC a 35 ºC durante 4 días no tuvo ningún efecto sobre los parámetros estudiados. La aplicación de la grasa líquida en la superficie del jamón evitó el secado excesivo en superficie, previno el desarrollo de la coquera y causó un aumento de la intensidad del flavor añejo y una reducción de la incidencia de notas negativas como el tostado, hechos que indican que la liberación de grasa líquida en el jamón ("sudado") constituye un fenómeno determinante en su calidad sensorial. La materia prima fue el factor que afectó a un mayor número de parámetros.