Self-Consolidating Concrete—Applications for Slip-Form Paving: Phase I (Feasibility Study), 2005

Over-consolidation is often visible as longitudinal vibrator trails in the surface of concrete pavements constructed using slip-form paving. Concrete research and practice have shown that concrete material selection and mix design can be tailored to provide a good compaction without the need for vibration. However, a challenge in developing self-consolidating concrete for slip-form paving (SF SCC) is that the new SF SCC needs to possess not only excellent self-compactibility and stability before extrusion, but also sufficient “green” strength after extrusion, while the concrete is still in a plastic state. The SF SCC to be developed will not be as fluid as the conventional SCC, but it will (1) be workable enough for machine placement, (2) be self-compacting with minimum segregation, (3) hold shape after extrusion from a paver, and (4) have performance properties (strength and durability) compatible to current pavement concrete. The overall objective of this project is to develop a new type of SCC for slip-form paving to produce more workable concrete and smoother pavements, better consolidation of the plastic concrete, and higher rates of production. Phase I demonstrated the feasibility of designing a new type of SF SCC that can not only self-consolidate, but also have sufficient green strength. In this phase, a good balance between flowability and shape stability was achieved by adopting and modifying the mix design of self-consolidating concrete to provide a high content of fine materials in the fresh concrete. It was shown that both the addition of fine particles and the modification of the type of plasticizer significantly improve fresh concrete flowability. The mixes used in this phase were also found to have very good shape stability in the fresh state. Phase II will focus on developing a SF SCC mix design in the lab and a performing a trial of the SF SCC in the field. Phase III will include field study, performance monitoring, and technology transfer.

Laboratory Investigation of Bridge Strip Seal Joint Termination Details, SPR RB08-014, 2016

Bridge expansion joints, if not properly designed, constructed, and maintained, often lead to the deterioration of critical substructure elements. Strip seal expansion joints consisting of a steel extrusion and neoprene gland are one type of expansion joint and are commonly used by the Iowa Department of Transportation (DOT). Strip seal expansion joints are susceptible to tears and pull outs that allow water, chlorides, and debris to infiltrate the joint, and subsequently the bearings below. One area of the strip seal that is particularly problematic is where it terminates at the interface between the deck and the barrier rail. The Iowa DOT has noted that the initial construction quality of the current strip seal termination detail is not satisfactory, nor ideal, and a need exists for re-evaluation and possibly re-design of this detail. Desirable qualities of a strip seal termination detail provide a seal that is simple and fast to construct, facilitate quick gland removal and installation, and provide a reliable, durable barrier to prevent chloride-contaminated water from reaching the substructure. To meet the objectives of this research project, several strip seal termination details were evaluated in the laboratory. Alternate termination details may not only function better than the current Iowa DOT standard, but are also less complicated to construct, facilitating better quality control. However, uncertainties still exist regarding the long-term effects of using straight-through details, with or without the dogleg, that could not be answered in the laboratory in the short time frame of the research project.

Structural, metamorphic and geochronological relations between the Zanskar Shear Zone and the Miyar Shear Zone (NW Indian Himalaya): Evidence for two distinct tectonic structures and implications for the evolution of the High Himalayan Crystalline of Zanskar

The geologic structures and metamorphic zonation of the northwestern Indian Himalaya contrast significantly with those in the central and eastern parts of the range, where the high-grade metamorphic rocks of the High Himalayan Crystalline (HHC) thrust southward over the weakly metamorphosed sediments of the Lesser Himalaya along the Main Central Thrust (MCT). Indeed, the hanging wall of the MCT in the NW Himalaya mainly consists of the greenschist facies metasediments of the Chamba zone, whereas HHC high-grade rocks are exposed more internally in the range as a large-scale dome called the Gianbul dome. This Gianbul dome is bounded by two oppositely directed shear zones, the NE-dipping Zanskar Shear Zone (ZSZ) on the northern flank and the SW-dipping Miyar Shear Zone (MSZ) on the southern limb. Current models for the emplacement of the HHC in NW India as a dome structure differ mainly in terms of the roles played by both the ZSZ and the MSZ during the tectonothermal evolution of the HHC. In both the channel flow model and wedge extrusion model, the ZSZ acts as a backstop normal fault along which the high-grade metamorphic rocks of the HHC of Zanskar are exhumed. In contrast, the recently proposed tectonic wedging model argues that the ZSZ and the MSZ correspond to one single detachment system that operates as a subhorizontal backthrust off of the MCT. Thus, the kinematic evolution of the two shear zones, the ZSZ and the MSZ, and their structural, metamorphic and chronological relations appear to be diagnostic features for discriminating the different models. In this paper, structural, metamorphic and geochronological data demonstrate that the MSZ and the ZSZ experienced two distinct kinematic evolutions. As such, the data presented in this paper rule out the hypothesis that the MSZ and the ZSZ constitute one single detachment system, as postulated by the tectonic wedging model. Structural, metamorphic and geochronological data are used to present an alternative tectonic model for the large-scale doming in the NW Indian Himalaya involving early NE-directed tectonics, weakness in the upper crust, reduced erosion at the orogenic front and rapid exhumation along both the ZSZ and the MSZ.

A quantitative analysis of L-glutamate-regulated Na+ dynamics in mouse cortical astrocytes: implications for cellular bioenergetics.

The mode of Na+ entry and the dynamics of intracellular Na+ concentration ([Na+]i) changes consecutive to the application of the neurotransmitter glutamate were investigated in mouse cortical astrocytes in primary culture by video fluorescence microscopy. An elevation of [Na+]i was evoked by glutamate, whose amplitude and initial rate were concentration dependent. The glutamate-evoked Na+ increase was primarily due to Na+-glutamate cotransport, as inhibition of non-NMDA ionotropic receptors by 6-cyano-7-nitroquinoxiline-2,3-dione (CNQX) only weakly diminished the response and D-aspartate, a substrate of the glutamate transporter, produced [Na+]i elevations similar to those evoked by glutamate. Non-NMDA receptor activation could nevertheless be demonstrated by preventing receptor desensitization using cyclothiazide. Thus, in normal conditions non-NMDA receptors do not contribute significantly to the glutamate-evoked Na+ response. The rate of Na+ influx decreased during glutamate application, with kinetics that correlate well with the increase in [Na+]i and which depend on the extracellular concentration of glutamate. A tight coupling between Na+ entry and Na+/K+ ATPase activity was revealed by the massive [Na+]i increase evoked by glutamate when pump activity was inhibited by ouabain. During prolonged glutamate application, [Na+]i remains elevated at a new steady-state where Na+ influx through the transporter matches Na+ extrusion through the Na+/K+ ATPase. A mathematical model of the dynamics of [Na+]i homeostasis is presented which precisely defines the critical role of Na+ influx kinetics in the establishment of the elevated steady state and its consequences on the cellular bioenergetics. Indeed, extracellular glutamate concentrations of 10 microM already markedly increase the energetic demands of the astrocytes.

Apparent digestibility of nutrients, energy, and amino acid of nontoxic and detoxified physic nut cakes for Nile tilapia

Abstract:The objective of this work was to evaluate the apparent digestibility coefficients of nutrients, energy, and amino acids of nontoxic and detoxified physic nut cakes treated with solvent plus posterior extrusion, for Nile tilapia. The apparent digestibility coefficients of crude protein and gross energy were higher for detoxified than for nontoxic physic nut cake. However, the apparent digestibility coefficient of ether extract of the nontoxic physic nut cake was higher than that of the detoxified one. The apparent digestibility coefficient of amino acids of both feed ingredients was superior to 80%, except for glycine, for the nontoxic psychic nut cake, and for threonine, for the detoxified one. Nontoxic and detoxified physic nut cakes show apparent digestibility coefficient values equivalent to those of the other evaluated oilseeds and potential for inclusion in Nile tilapia diets.

Evidence of an efflux pump in Serratia marcescens

Spontaneous mutants resistant to fluoroquinolones were obtained by exposing Serratia marcescens NIMA (wild-type strain) to increasing concentrations of ciprofloxacin both in liquid and on solid media. Frequencies of mutation ranged from 10-7 to 10-9. Active expulsion of antibiotic was explored as a possible mechanism of resistance in mutants as well as changes in topoisomerase target genes. The role of extrusion mechanisms in determining the emergence of multidrug-resistant bacteria was also examined. Mutants resistant to high concentrations of fluoroquinolones had a single mutation in their gyrA QRDR sequences, whereas the moderate resistance in the rest of mutants was due to extrusion of the drug

Evidence of an efflux pump in Serratia marcescens

Spontaneous mutants resistant to fluoroquinolones were obtained by exposing Serratia marcescens NIMA (wild-type strain) to increasing concentrations of ciprofloxacin both in liquid and on solid media. Frequencies of mutation ranged from 10-7 to 10-9. Active expulsion of antibiotic was explored as a possible mechanism of resistance in mutants as well as changes in topoisomerase target genes. The role of extrusion mechanisms in determining the emergence of multidrug-resistant bacteria was also examined. Mutants resistant to high concentrations of fluoroquinolones had a single mutation in their gyrA QRDR sequences, whereas the moderate resistance in the rest of mutants was due to extrusion of the drug

Localization and expression of EDS5H a homologue of the SA transporter EDS5.

BACKGROUND: An important signal transduction pathway in plant defence depends on the accumulation of salicylic acid (SA). SA is produced in chloroplasts and the multidrug and toxin extrusion transporter ENHANCED DISEASE SUSCEPTIBILITY5 (EDS5; At4g39030) is necessary for the accumulation of SA after pathogen and abiotic stress. EDS5 is localized at the chloroplast and functions in transporting SA from the chloroplast to the cytoplasm. EDS5 has a homologue called EDS5H (EDS5 HOMOLOGUE; At2g21340) but its relationship to EDS5 has not been described and its function is not known. RESULTS: EDS5H exhibits about 72% similarity and 59% identity to EDS5. In contrast to EDS5 that is induced after pathogen inoculation, EDS5H was constitutively expressed in all green tissues, independently of pathogen infection. Both transporters are located at the envelope of the chloroplast, the compartment of SA biosynthesis. EDS5H is not involved with the accumulation of SA after inoculation with a pathogen or exposure to UV stress. A phylogenetic analysis supports the hypothesis that EDS5H may be an H(+)/organic acid antiporter like EDS5. CONCLUSIONS: The data based on genetic and molecular studies indicate that EDS5H despite its homology to EDS5 does not contribute to pathogen-induced SA accumulation like EDS5. EDS5H most likely transports related substances such as for example phenolic acids, but unlikely SA.

Eri raaka-ainemuotojen hyödyntäminen puumuovikomposiitin valmistuslinjastossa

Diplomityössä tutkittiin erilaisten raaka-ainemuotojen hyödyntämistä puumuovikomposiitin valmistuslinjastossa ja raaka-ainemuotojen vaikutusta valmistuslinjaston kannattavuuteen. Työssä etsittiin kannattavinta yhdistelmää raaka-ainemuotojen ja valmistusvaihtoehtojen välille. Työn johdanto osuudessa käsitellään aiheeseen liittyvää kirjallisuutta ja tutkimuksia. Siinä esitellään valmistusprosessin vaiheet ja raaka-aineet, niihin vaikuttavat tekijät, valmistuksen taloudellisuus ja investointikäsitteet. Käytännön osuus koostuu valmistusprosessin taloudellisesta analyysista ja laboratoriossa suoritetuista koeajoista. Taloudellisessa analyysissa selvitettiin raaka-ainemuotojen kannattavuudet eri valmistusvaihtoehdoille ja koeajoissa tutkittiin raaka-ainemuotojen todellista käyttäytymistä ekstruusiossa kahdella erilaisella profiililla. Taloudellisen analyysin perusteella paras kannattavuus valmistusprosessissa saavutetaan puupelleteillä ja yksivaiheinen valmistus on kannattavampaa kuin kaksivaiheinen valmistus kaikilla raaka-ainemuodoilla. Kaksivaiheinen valmistus voisi kuitenkin teoriassa olla kannattavampaa kuin yksivaiheinen. Koeajoissa suurin maksimituotos saavutettiin puumuovipuristeilla, mutta ajettavuuden kannalta sopivin raaka-ainemuoto linjalle olisi jauhemainen sahanpuru. Puumuovipuristeita käytettäessä oli erittäin vaikeaa löytää ekstruuderille sopivia muuttujien arvoja ja muuttujien säätäminen muuttui vaikeammaksi, kun käytössä oli monimutkaisempi terassilautaprofiili.

Lower incisor dentoalveolar compensation and symphysis dimensions among Class I and III malocclusion patients with different facial vertical skeletal patterns

Objective: To compare lower incisor dentoalveolar compensation and mandible symphysis morphology among Class I and Class III malocclusion patients with different facial vertical skeletal patterns. Materials and Methods: Lower incisor extrusion and inclination, as well as buccal (LA) and lingual (LP) cortex depth, and mandibular symphysis height (LH) were measured in 107 lateral cephalometric x-rays of adult patients without prior orthodontic treatment. In addition, malocclusion type (Class I or III) and facial vertical skeletal pattern were considered. Through a principal component analysis (PCA) related variables were reduced. Simple regression equation and multivariate analyses of variance were also used. Results: Incisor mandibular plane angle (P < .001) and extrusion (P  =  .03) values showed significant differences between the sagittal malocclusion groups. Variations in the mandibular plane have a negative correlation with LA (Class I P  =  .03 and Class III P  =  .01) and a positive correlation with LH (Class I P  =  .01 and Class III P  =  .02) in both groups. Within the Class III group, there was a negative correlation between the mandibular plane and LP (P  =  .02). PCA showed that the tendency toward a long face causes the symphysis to elongate and narrow. In Class III, alveolar narrowing is also found in normal faces. Conclusions: Vertical facial pattern is a significant factor in mandibular symphysis alveolar morphology and lower incisor positioning, both for Class I and Class III patients. Short-faced Class III patients have a widened alveolar bone. However, for long-faced and normal-faced Class III, natural compensation elongates the symphysis and influences lower incisor position.

OLFM4 : a neutrophil shield against autoimmunity?

Neutrophil extracellular traps (NETs) formation is a cell death mechanism characterized by the extrusion of DNA fibers associated to antimicrobial peptides such as LL37. Beside their antimicrobial role, NETs are highly immunogenic by their ability to activate plasmacytoid dendritic cells (pDCs). In this context, LL37 binds to NET-DNA, leading to endosomal Toll¬like-receptor (TLR) 9 binding, resulting in Interferon alpha (IFNa) production by pDCs. Uncontrolled pDC activation by NETs is an important player in the pathogenesis of autoimmune disease such as Lupus Erythematosus (LE); however the regulation of NET- driven pDC activation is poorly characterized. Olfactomedin 4 (OLFM4) is a granule protein present in a subset of circulating neutrophils and was shown to bear anti-inflammatory properties in a mouse model, raising the possibility that it may regulate neutrophil-induced inflammation. Therefore, in this project, we aimed at deciphering the mechanism by which OLFM4 may regulate inflammation induced by NET-activated pDC and its relevance in the pathogenesis of Lupus Erythematosus (LE). First, we show that OLFM4 directly interacted with LL37 in neutrophils, impairing LL37/DNA complexes formation and pDC activation to produce IFNa. Then, by using an in vivo model of acute inflammation depending on NET- driven activation of pDCs, we observed that the absence of Olfm4 led to uncontrolled type I IFN production, confirming the regulatory role of neutrophil-derived OLFM4. Beyond controlling NET-induced inflammation, we also show that OLFM4 could inhibit pDC activation mediated by DNA-containing immune complexes (ICs), suggesting that OLFM4 holds anti¬inflammatory properties in the context of LE. Of note, we identified a previously unknown population of OLFM4hi9h neutrophils in healthy individuals that may belong to the immunosuppressive subset of granulocytic myeloid-derived suppressor cells (g-MDSCs). Strikingly, we observed a decreased frequency of OLFM4h'9h cells among inflammatory Low density granulocytes (LDGs) neutrophils in LE patients, suggesting that a disequilibrium between pro- and anti-inflammatory neutrophils may participate to the disease pathogenesis. Altogether, this study demonstrates that OLFM4 is involved in the resolution of inflammation. -- La NETose (formation de Neutrophil Extracellular Traps, NETs) est une réponse à un stimulus inflammatoire caractérisée par l'expulsion de l'ADN lié à des peptides antimicrobiens comme le LL37, induisant la mort de la cellule. Les NETs possèdent des propriétés antibactériennes et sont pro-inflammatoires via leur capacité à activer les cellules dendritiques plasmacytoïdes (pDCs). Dans ce contexte, les complexes ADN/LL37 libérés lient le récepteur Toll-like 9 des pDCs, induisant la production d'Interféron alpha (IFNa). La production incontrôlée d'IFNa par les pDCs est impliquée dans la pathogenèse du Lupus Erythemateux (LE), cependant la régulation de l'activation des pDCs reste mal connue. L'Oflactomédine 4 (OLFM4) est une protéine produite par une sous-population de neutrophiles, avec des propriétés anti-inflammatoires possibles. Le but de ce projet était d'identifier les mécanismes par lesquels l'OLFM4 pourrait réguler l'inflammation induite par les NETs et sa relevance dans la pathogenèse du LE. Tout d'abord, nous avons montré que l'OLFM4 interagissait avec le LL37, empêchant la production des complexes ADN/LL37 qui activent les pDCs. Nous avons vérifié notre hypothèse in vivo en utilisant un modèle murin d'inflammation locale dépendant des pDCs et des NETs. Dans ce contexte, le déficit en Olfm4 était associé à une production accrue d'IFNa, confirmant le rôle de l'OLFM4 dans le contrôle de l'inflammation. De plus, l'OLFM4 pouvait également inhiber l'activation des pDCs induite par des complexes immuns, suggérant que l'OLFM4 serait aussi anti-inflammatoire dans le contexte du LE. Ensuite, nous avons identifié une nouvelle population de neutrophiles OLFM4h'9h chez les sujets sains qui pourraient appartenir au sous-type anti¬inflammatoire des g-MDSCs (granulocytic myeloid-derived suppressor cells). Nous avons observé une diminution de ces cellules parmi les neutrophiles pro-inflammatoires LDGs (Low Density Granulocytes) dans le LE suggérant qu'un déséquilibre entre les sous-types de neutrophiles pourrait participer à l'inflammation excessive de cette maladie. Ces travaux mettent en évidence l'implication de l'OLFM4 dans la résolution de l'inflammation et suggèrent qu'une expression altérée de l'OLFM4 pourrait participer à la pathogenèse du LE. -- Les neutrophils constituent la majorité des globules blancs circulants et sont rapidement mobilisés depuis le sang dans un organe lésé en cas d'infection ou de blessure. Ils représentent la première ligne de défense du système immunitaire. Ils sont indispensables dans la défense contre les infections par leur capacité à tuer les bactéries, par exemple en produisant des peptides antimicrobiens (AMPs) qui fonctionnent comme des antibiotiques naturels. De plus, les neutrophiles recrutent les autres membres du système immunitaire qui sont nécessaires à l'éradication complète des microbes et à la réparation des tissus. Les nombreux outils permettant aux neutrophiles de contrôler les infections ne sont cependant pas sans danger pour les tissus. En effet, diverses molécules comme les AMPs peuvent induire des dommages tissulaires substantiels en participant au développement d'une inflammation chronique. Ceci est particulièrement le cas lorsque les neutrophiles meurent par un processus nommé NETose. Dans ce contexte, la cellule subit une dissolution de sa membrane suivie de l'expulsion de son ADN associé à des AMPs. Ces complexes formés d'ADN et d'AMPs induisent la production de cytokines pro-inflammatoires dont l'Interféron alpha (IFNa). Certaines maladies auto-immunes comme le lupus érythémateux sont associées à un excès de NETose produit par les neutrophiles et à un excès d'IFNa qui participe au développement de la maladie. Dans cette thèse, nous avons montré que l'Olfactomédine 4 (OLFM4), une protéine produite par les neutrophiles eux-mêmes, est un inhibiteur de cette inflammation. Nous avons démontré que TOLFM4 empêchait la formation des complexes ADN/AMPs, réduisant par là la production d'IFNa in vitro et in vivo. Finalement, nos recherches ont suggéré que l'OLFM4 pourrait être insuffisamment produite chez les patients souffrant de lupus, ce qui pourrait participer à l'inflammation chronique associée à la maladie.

Muovien laserhitsaus modernissa optisen kuitukaapelin tuotannossa

Tämän diplomityön päämääränä oli tutkia nykyisen optisen markkinasektorin nykytilaa ja ennakoida mahdollista tulevaa kapasiteetin tarpeen kasvua merkittävän taantumakauden jälkeen. Erityistä huomiota käytettiin kaapelin valmistuksen vaiheisiin ja näitä vastaaviin laitteisiin. Tätä kautta selvitettiin nykyisten markkinoilla toimivien laiteratkaisujen ominaisuudet. Työssä havaittiin kuitukaapeleiden rakenneratkaisujen muuttuvan asennettavuuden parantamisen ja kaapeleiden paremman kestävyyden suuntaan. Näiden muuttuessa tulevat valmistustekniikat ja menetelmät kehittymään vastaamaan uusia ratkaisuja. Laserhitsausmenetelmällä voidaan laajentaa kaapeleiden rakenneratkaisujen ja materiaalivaihtoehtojen valikoimaa perinteisen extruusiotekniikan rinnalle. Työ avaa uusia toteutusmandollisuuksia kaapelinvalmistusprosessiin, sekä antaa pohjaa uusien kaapelirakenteiden tuomiseen globaaleille optisen kuitukaapelin markkinoille.

Cyclosporine A kinetics in brain cell cultures and its potential of crossing the blood-brain barrier.

There is an increasing need to develop improved systems for predicting the safety of xenobiotics. However, to move beyond hazard identification the available concentration of the test compounds needs to be incorporated. In this study cyclosporine A (CsA) was used as a model compound to assess the kinetic profiles in two rodent brain cell cultures after single and repeated exposures. CsA induced-cyclophilin B (Cyp-B) secretion was also determined as CsA-specific pharmacodynamic endpoint. Since CsA is a potent p-glycoprotein substrate, the ability of this compound to cross the blood-brain barrier (BBB) was also investigated using an in vitro bovine model with repeated exposures up to 14days. Finally, CsA uptake mechanisms were studied using a parallel artificial membrane assay (PAMPA) in combination with a Caco-2 model. Kinetic results indicate a low intracellular CsA uptake, with no marked bioaccumulation or biotransformation. In addition, only low CsA amounts crossed the BBB. PAMPA and Caco-2 experiments revealed that CsA is mostly trapped to lipophilic compartments and exits the cell apically via active transport. Thus, although CsA is unlikely to enter the brain at cytotoxic concentrations, it may cause alterations in electrical activity and is likely to increase the CNS concentration of other compounds by occupying the BBBs extrusion capacity. Such an integrated testing system, incorporating BBB, brain culture models and kinetics could be applied for assessing neurotoxicity potential of compounds.

Pregabalin in the treatment of inferior alveolar nerve paraesthesia following overfilling of endodontic sealer

A case of orofacial pain and inferior alveolar nerve (IAN) paraesthesia after extrusion of endodontic sealer within the mandibular canal treated with prednisone and pregabalin is described. A 36-year-old woman underwent root canal treatment of the mandibular second right premolar tooth. Post-operative panoramic radiograph revealed the presence of radiopaque canal sealer in the mandibular canal. Damage to IAN consecutive to extrusion of endodontic sealer was diagnosed. Non-surgical management was decided, including: 1 mg/kg/day prednisone 2 times/day, once-daily regimen, and 150 mg/day pregabalin, two doses per day, monitoring the progress with periodic follow-up visits. Six weeks after the incident the signs and symptoms were gone. The complete resolution of paraesthesia and the control of pain achieved suggest that a non-surgical approach, combining prednisone and the GABA analogue pregabalin, is a good option in the management of the IAN damage subsequent to endodontic sealer extrusion

Korroosionesto polymeerin ekstruusiolinjalla

Tämä diplomityö tutkii korroosionestoa polymeerin ekstruusiolinjalla. Kirjallisuusosassa käsitellään ekstruusiolinjaa, linjalla valmistettavia tuotteita ja niiden jatkojalostusta. Lisäksi kirjallisuusosassa käydään läpi linjalla ilmeneviä korroosiotyyppejä, korroosiota eri prosessilaitteissa, korroosionestossa käytettäviä inhibiittoreita ja eri materiaalien korroosiokestävyyden kartoitusta. Kokeellisessa osassa tutkittiin perushartsin kuivauksen vaikutusta ekstruuderin kaasutilan metanoli-, happi- ja kosteuspitoisuuksiin. Kokeellisessa osassa tutkittiin myös korroosioinhibiittorien I1 ja I2 vaikutusta korroosionestoon, seuraamalla korrodoivalla alueella olleiden ruuvielementtien painohäviöitä. Kaapelitestauksessa selvitettiin inhibiittorien käytön vaikutukset matalajännitekaapelin laatuun. Kuivauksella ei todettu olevan vaikutusta korroosionestoon. Metanolipitoisuus pysyi korkeana ja happipitoisuuden aleneminen ei ollut merkittävää. Kosteuspitoisuuden suuruusluokka selvitettiin. Kuivauksesta huolimatta se pysyi korkeana. Inhibiittorien käytöstä huolimatta ruuvielementit korrodoituivat, mutta inhibiittoria I2 käytettäessä tutkittujen ruuvielementtien painohäviöt olivat pienempiä referenssiajoon verrattuna. Inhibiittori I2:lla ei todettu olevan negatiivisia vaikutuksia matalajännitekaapelin laatuun suoritetuissa ikääntymis- sähköominaisuus- ja ristisilloittumisnopeustesteissä.