As tramas sociais do trabalho ambulante e a experiência de trabalhadores em Rio das Ostras/RJ

A presente dissertação se insere no campo de estudo sobre o trabalho informal, tendo como universo empírico de investigação a experiência de trabalho dos trabalhadores ambulantes integrantes do Programa Renda Alternativa, em Rio das Ostras/RJ. Portanto, a pesquisa foi desdobrada em três dimensões: 1) levantamento e estudo bibliográfico; 2) levantamento de dados sobre a formação sócio-histórica da cidade de Rio das Ostras; e, 3) trabalho de campo com ambulantes. Por meio desses dispositivos, a pesquisa buscou compreender os laços entre informalidade do trabalho e dinâmica capitalista, por meio da tradição de estudos das Ciências Sociais nessa área. Seguidamente, a pesquisa se ocupou do estudo de outras investigações sobre trabalho ambulante visando conhecer e ampliar o escopo de análise das peculiaridades desse tipo de trabalho no contexto de reprodução social da chamada superpopulação relativa. Esse universo de questões teóricas, analíticas e empíricas foi confrontado com as especificidades do contexto socioeconômico da cidade de Rio das Ostras, recentemente recomposta como um dos elos da cadeia produtiva do petróleo. Outro eixo da investigação de campo foi conhecer o trabalho, o que foi realizado por meio de entrevistas semi-estruturadas com os trabalhadores ambulantes do município, buscando perceber a relação do trabalhador com o trabalho ao longo de sua vida, as marcas das conjunturas socioeconômicas nas trajetórias e o papel da família e do associativismo na ocupação ambulante. Os achados da pesquisa mostram que o trabalho ambulante acomete gerações de trabalhadores como consequência do desenvolvimento desigual e dependente do capitalismo que limita a oferta de emprego. Somado a isso temos os processos de transformações socioeconômicas das últimas décadas que intensificam as formas de precarização do trabalho potencializando a chamada informalidade do trabalho. Esse processo se intensifica na região em estudo através dos impactos trazidos pelo intenso incremento das indústrias de petróleo e gás que não absorvem a força de trabalho disponível no local e atraída, engendrando uma densa superpopulação relativa para o capital, no município. A experiência de trabalho dos ambulantes que participaram da pesquisa mostra que a mesma é entrecortada por formas laborativas variadas, baixa qualificação profissional, além de dependência dos familiares, de ações públicas do Estado e do associativismo. A expropriação do direito ao emprego empurra os trabalhadores para experiências laborativas inseguras, incertas e sem proteção social. A repetição dessa história entre familiares amplia a percepção da perenidade da expropriação social entre gerações de trabalhadores.

Uma Simulação computacional do passeio aleatório simples

Em 1828 foi observado um fenômeno no microscópio em que se visualizava minúsculos grãos de pólen mergulhados em um líquido em repouso que mexiam-se de forma aleatória, desenhando um movimento desordenado. A questão era compreender este movimento. Após cerca de 80 anos, Einstein (1905) desenvolveu uma formulação matemática para explicar este fenômeno, tratado por movimento Browniano, teoria cada vez mais desenvolvida em muitas das áreas do conhecimento, inclusive recentemente em modelagem computacional. Objetiva-se pontuar os pressupostos básicos inerentes ao passeio aleatório simples considerando experimentos com e sem problema de valor de contorno para melhor compreensão ao no uso de algoritmos aplicados a problemas computacionais. Foram explicitadas as ferramentas necessárias para aplicação de modelos de simulação do passeio aleatório simples nas três primeiras dimensões do espaço. O interesse foi direcionado tanto para o passeio aleatório simples como para possíveis aplicações para o problema da ruína do jogador e a disseminação de vírus em rede de computadores. Foram desenvolvidos algoritmos do passeio aleatório simples unidimensional sem e com o problema do valor de contorno na plataforma R. Similarmente, implementados para os espaços bidimensionais e tridimensionais,possibilitando futuras aplicações para o problema da disseminação de vírus em rede de computadores e como motivação ao estudo da Equação do Calor, embora necessita um maior embasamento em conceitos da Física e Probabilidade para dar continuidade a tal aplicação.

Microhabitat breadth of fish community along the Vamanapuram River, south Kerala

The microhabitat breadth of Vamanapuram River fish community was studied in detail. The microhabitat variables selected were relative depth, focal point velocity, water column depth, mean water velocity and substrate. Puntius filamentosus had the highest breadth in three dimensions in both stream and river habitats showing a generalistic mode of resource utilization. Garra mullya, Labeo dero and Glossogobius giuris are specialists in the usage of microhabitat variables in the stream habitat while these are G. mullya, Etroplus maculatus and Aplocheilus lineatus in river habitat. Danio aequipinnatus showed extreme variations along focal point velocity variable in both habitats indicating an. opportunistic behaviour.

Evaluation of a summer institute on fish processing technology

The utility of Summer Institute Efficiency Index (SIEI) is demonstrated using data from evaluation of a summer institute in fish processing. The SIEI worked to 76.16 showing high efficiency rating. The acquisition of skills appears to be independent of coverage and utility perception. The three dimensions of evaluation correlate highly with SIEI.

Control of aircraft in the terminal manoeuvring area using parallelised sequential Monte Carlo

This paper reports on the use of a parallelised Model Predictive Control, Sequential Monte Carlo algorithm for solving the problem of conflict resolution and aircraft trajectory control in air traffic management specifically around the terminal manoeuvring area of an airport. The target problem is nonlinear, highly constrained, non-convex and uses a single decision-maker with multiple aircraft. The implementation includes a spatio-temporal wind model and rolling window simulations for realistic ongoing scenarios. The method is capable of handling arriving and departing aircraft simultaneously including some with very low fuel remaining. A novel flow field is proposed to smooth the approach trajectories for arriving aircraft and all trajectories are planned in three dimensions. Massive parallelisation of the algorithm allows solution speeds to approach those required for real-time use.

On kinematic relaxation and deposition of water droplets in the last stages of low pressure steam turbines

In the first part of the paper steady two-phase flow predictions have been performed for the last stage of a model steam turbine to examine the influence of drag between condensed fog droplets and the continuous vapour phase. In general, droplets due to homogeneous condensation are small and thus kinematic relaxation provides only a minor contribution to the wetness losses. Different droplet size distributions have been investigated to estimate at which size inter-phase friction becomes more important. The second part of the paper deals with the deposition of fog droplets on stator blades. Results from several references are repeated to introduce the two main deposition mechanisms which are inertia and turbulent diffusion. Extensive postprocessing routines have been programmed to calculate droplet deposition due to these effects for a last stage stator blade in three-dimensions. In principle the method to determine droplet deposition by turbulent diffusion equates to that of Yau and Young [1] and the advantages and disadvantages of this relatively simple method are discussed. The investigation includes the influence of different droplet sizes on droplet deposition rates and shows that for small fog droplets turbulent diffusion is the main deposition mechanism. If the droplets size is increased inertial effects become more and more important and for droplets around 1 μm inertial deposition dominates. Assuming realistic droplet sizes the overall deposition equates to about 1% to 3% of the incoming wetness for the investigated guide vane at normal operating conditions. Copyright © 2013 by Solar Turbines Incorporated.

Modelling and validation of wet steam flow in a low pressure steam turbine

Results of numerical investigations of the wet steam flow in a three stage low pressure steam turbine test rig are presented. The test rig is a scale model of a modern steam turbine design and provides flow measurements over a range of operating conditions which are used for detailed comparisons with the numerical results. For the numerical analysis a modern CFD code with user defined models for specific wet steam modelling is used. The effect of different theoretical models for nucleation and droplet growth are examined. It is shown that heterogeneous condensation is highly dependent on steam quality and, in this model turbine with high quality steam, a homogeneous theory appears to be the best choice. The homogeneous theory gives good agreement between the test rig traverse measurements and the numerical results. The differences in the droplet size distribution of the three stage turbine are shown for different loads and modelling assumptions. The different droplet growth models can influence the droplet size by a factor of two. An estimate of the influence of unsteady effects is made by means of an unsteady two-dimensional simulation. The unsteady modelling leads to a shift of nucleation into the next blade row. For the investigated three stage turbine the influence due to wake chopping on the condensation process is weak but to confirm this conclusion further investigations are needed in complete three dimensions and on turbines with more stages. Copyright © 2011 by ASME.

Ni silicide nanowires analysis by atom probe tomography

The Ni silicide formed at low temperature on Si nanowire has been analyzed by atom probe tomography (APT) thanks to a special technique for sample preparation. A method of preparation has been developed using the focused ion beam (FIB) for the APT analysis of nanowires (NWs). This method allow for the measurement of the radial distribution when a NW is cut, buried in a protective metal matrix, and finally mounted on the APT support post. This method was used for phosphorous doped Si NWs with or without a silicide shell, and allows obtaining the concentration and distribution of chemical elements in three-dimensions (3D) in the radial direction of the NWs. The distribution of atoms in the NWs has been measured including dopants and Au contamination. These measurements show that δ-Ni2Si phase is formed on Si NW, Au is found as cluster at the Ni/δ-Ni2Si interface and P is segregated at the δ-Ni2Si/ Si NW interface. The results obtained on NWs after silicidation were compared with the silicide on the Si substrate, showing that the same silicide phase δ-Ni2Si formed in both cases (NWs and substrate). © 2013 Elsevier B.V. All rights reserved.

Electronic structure of InSb quantum ellipsoids in an external magnetic field

The shape dependence of electronic structure, electron g factors in the presence of the external magnetic field of InSb quantum ellipsoids are investigated in the framework of eight-band effective-mass approximation. It is found that as the increasing aspect ratio e, the electron states with P character split into three doublets for the different physical interaction and the light-hole states with S character come up to the top of valence bands at e = 2.6 in comparison with the heavy-hole states. In the presence of the external magnetic field, the energy splits of electron states are different for their wave function distribution direction, and the hole ground state remain optical active for a suitable aspect ratio. The electron g factors of InSb spheres decrease with increasing radius, and have the value of about two for the smallest radius, about -47.2 for sufficiently larger radius, similar to the bulk material case. Actually, the electron g factors decrease as any one of the three dimensions increase. The more dimensions increase, the more g factors decrease. The dimensions perpendicular to the direction of the magnetic field affect the g factors more than the other dimensions. (c) 2006 Elsevier B.V. All rights reserved.

Electronic structure and g factors of CdTe quantum ellipsoids

The electronic structure, electron and hole g factors and optical properties of CdTe quantum ellipsoids are investigated, in the framework of eight-band effective-mass approximation. It is found that the light-hole states come down in comparison with the heavy-hole states when the spheres are elongated, and become the lowest states of valence band. When the aspect ratio of the ellipsoid length to diameter (e) changes from smaller than 1 to larger than 1, the linear polarization factors change from negative to positive. The electron g factors of CdTe spheres decrease with increasing radius, and are nearly 2 when the radius is very small. Actually, as some of the three dimensions increase, the electron g factors decrease. More dimensions increase, the g factors decrease. more. The dimensions perpendicular to the direction of the magnetic field affect the g factors more than the other dimension. The light-hole and heavy-hole g factors of quantum spheres are equal, and change from 0.88 to -1.14 with increasing radius. When e < 1 (e > 1) the light-hole g factor is smaller (larger) than the heavy-hole g factor. (c) 2006 Elsevier B.V. All rights reserved.

Optical properties and g factors of GaAs quantum rods

The Hamiltonian of the zinc-blende quantum rods in the framework of eight-band effective-mass approximation in the presence of external homogeneous magnetic field is given. The electronic structure, optical properties and electron g factors of GaAs quantum rods are investigated. We found that the electron g factors are very sensitively dependent on the dimensions of the quantum rods. As some of the three dimensions increase, the electron g factors decrease. The more the dimensions increase, the more the electron g factors decrease. The dimensions perpendicular to the direction of the magnetic field affect the electron g factors more than the other dimension. (c) 2006 Elsevier B.V. All rights reserved.

Electron g factors and optical properties of InAs quantum ellipsoids

The electronic structure, electron g factors and optical properties of InAs quantum ellipsoids are investigated, in the framework of the eight-band effective-mass approximation. It is found that the light-hole states come down in comparison with the heavy-hole states when the spheres are elongated, and become the lowest states of the valence band. Circularly polarized emissions under circularly polarized excitations may have opposite polarization factors to the exciting light. For InAs ellipsoids the length, which is smaller than 35 nm, is still in a strongly quantum-confined regime. The electron g factors of InAs spheres decrease with increasing radius, and are nearly 2 when the radius is very small. The quantization of the electron states quenches the orbital angular momentum of the states. Actually, as some of the three dimensions increase, the electron g factors decrease. As more dimensions increase, the g factors decrease more. The dimensions perpendicular to the direction of the magnetic field affect the g factors more than the other dimension. The magnetic field along the z axis of the crystal structure causes linearly polarized emissions in the spheres, which emit unpolarized light in the absence of magnetic field.

Electronic structure and electron g factors of HgTe quantum dots

The electronic structure and electron g factors of HgTe quantum dots are investigated, in the framework of the eight-band effective-mass approximation. It is found that the electron states of quantum spheres have aspheric properties due to the interaction between the conduction band and valence band. The highest hole states are S (l = 0) states, when the radius is smaller than 9.4 nm. the same as the lowest electron states. Thus strong luminescence from H-Te quantum dots with radius smaller than 9.4 nm has been observed (Rogach et al 2001 Phys. Statits Solidi b 224 153). The bandgap of H-Te quantum spheres is calculated and compared with earlier experimental results (Harrison et al 2000 Pure Appl. Chem. 72 295). Due to the quantum confinement effect, the bandgap of the small HgTe quantum spheres is positive. The electron g factors of HgTe quantum spheres decrease with increasing radius and are nearly 2 when the radius is very small. The electron g factors of HgTe quantum ellipsoids are also investigated. We found that as some of the three dimensions increase, the electron g factors decrease. The more the dimensions increase, the more the g factors decrease. The dimensions perpendicular to the direction of the magnetic field affect the g factors more than the other dimension.

Characteristics of the conductive polyimide film surfaces induced by ultraviolet laser beam

A conducting layer with the conductivity of 1.2 Omega(-1)cm(-1) stripped in a solvent from KrF-laser-irradiated polyimide thin film is taken as a sample to determine the microstructure of the conducting layer. Fourier-transform infrared and X-ray photoelectron spectroscopies show the formation of the carbon-rich clusters after irradiation. The element analysis gives the atomic ratio of C:H:N:O for the carbon-rich cluster as 60:20:3:1. Wide-angle X-ray diffraction indicates that the conducting layer is mainly amorphous carbon with a small amount of the short-range ordered carbon-rich clusters. This study suggests a structural model with three-layer carbon sheets linked together in a random fashion for the short-range ordered carbon-rich clusters. The interplanar spacing is 3.87 Angstrom and the layer diameter 25 Angstrom. The transport model of variable-range hopping in three dimensions is used to explain the conducting behavior of the conducting layer. In our case, the short-range ordered carbon-rich clusters are assumed to be conducting islands dispersed in the amorphous carbon-rich cluster matrix.

Effective response of nonlinear composite under external AC and DC electric field

A perturbation method is used to study effective response of nonlinear Kerr composites, which are subject to the constitutive relation of electric displacement and electric field, D-alpha = epsilon(alpha)E + chi(alpha)vertical bar E vertical bar(2)E. Under the external AC and DC electric field E-app = E-a (1 + sinwt), the effective nonlinear responses and local potentials are induced by the cubic nonlinearity of Kerr materials at all harmonics. As an example in three dimensions, we have investigated this kind of nonlinear composites with spherical inclusions embedded in a host. At all harmonic frequencies, the potentials in inclusion and host regions are derived. Furthermore, the formulae of the effective linear and nonlinear responses are given in the dilute limit.