Acoustic multi-frequency indicator of four major groups on a spatial grid in the Bay of Biscay

The first data set contains the mean and cofficient of variation (standard deviation divided by mean) of a multi-frequency indicator I derived from ER60 acoustic information collected at five frequencies (18, 38, 70, 120, and 200 kHz) in the Bay of Biscay in May of the years 2006, 2008, 2009 and 2010 (Pelgas surveys). The multi-frequency indicator was first calculated per voxel (20 m long × 5 m deep sampling unit) and then averaged on a spatial grid (approx. 20 nm × 20 nm) for five 5-m depth layers in the surface waters (10-15m, 15-20m, 20-25m, 25-30m below sea surface); there are missing values in particular in the shallowest layer. The second data set provides for each grid cell and depth layer the proportion of voxels for which the multi-frequency indicator I was indicative of a certain group of organisms. For this the following interpretation was used: I < 0.39 swim bladder fish or large gas bubbles, I = 0.39-0.58 small resonant bubbles present in gas bearing organisms such as larval fish and phytoplankton, I = 0.7-0.8 fluidlike zooplankton such as copepods and euphausiids, and I > 0.8 mackerel. These proportions can be interpreted as a relative abundance index for each of the four organism groups.

Body sizes and dive characteristics of narwhals (Monodon monoceros) from Kakiak Point and Melville Bay (2005-2007)

We report on wintertime data collected from Baffin Bay and northern Davis Strait, a major gateway linking the Arctic with the subpolar North Atlantic, using narwhals (Monodon monoceros) as an oceanographic sampling platform. Fourteen narwhals were instrumented with satellite-linked time-depth-temperature recorders between 2005 and 2007. Transmitters collected and transmitted water column temperature profiles from each dive between December and April, where >90% of maximum daily dive depths reached the bottom. Temperature measurements were combined with 15 helicopter-based conductivity-temperature-depth (CTD) casts taken in April 2007 across central Baffin Bay and compared with hydrographic climatology values used for the region in Arctic climate models. Winter temperature maxima for whale and CTD data were in good agreement, ranging between 4.0°C and 4.6°C in inshore and offshore Baffin Bay and in Davis Strait. The warm Irminger Water was identified between 57°W and 59°W (at 68°N) between 200 and 400 m depths. Whale data correlated well with climatological temperature maxima; however, they were on average 0.9°C warmer ±0.6°C (P < 0.001). Furthermore, climatology data overestimated the winter surface isothermal layer thickness by 50-80 m. Our results suggest the previously documented warming in Baffin Bay has continued through 2007 and is associated with a warmer West Greenland Current in both of its constituent water masses. This research demonstrates the feasibility of using narwhals as ocean observation platforms in inaccessible Arctic areas where dense sea ice prevents regular oceanographic measurements and where innate site fidelity, affinity for winter pack ice, and multiple daily dives to >1700 m offer a useful opportunity to sample the area.

Seawater carbonate chemistry, survival rate, shell mass growth, shell dissolution and locomotory speed of Limacina retroversa in a laboratory experiment

Anthropogenic carbon dioxide emissions induce ocean acidification, thereby reducing carbonate ion concentration, which may affect the ability of calcifying organisms to build shells. Pteropods, the main planktonic producers of aragonite in the worlds' oceans, may be particularly vulnerable to changes in sea water chemistry. The negative effects are expected to be most severe at high-latitudes, where natural carbonate ion concentrations are low. In this study we investigated the combined effects of ocean acidification and freshening on Limacina retroversa, the dominant pteropod in sub polar areas. Living L. retroversa, collected in Northern Norwegian Sea, were exposed to four different pH values ranging from the pre-industrial level to the forecasted end of century ocean acidification scenario. Since over the past half-century the Norwegian Sea has experienced a progressive freshening with time, each pH level was combined with a salinity gradient in two factorial, randomized experiments investigating shell degradation, swimming behavior and survival. In addition, to investigate shell degradation without any physiologic influence, one perturbation experiments using only shells of dead pteropods was performed. Lower pH reduced shell mass whereas shell dissolution increased with pCO2. Interestingly, shells of dead organisms had a higher degree of dissolution than shells of living individuals. Mortality of Limacina retroversa was strongly affected only when both pH and salinity reduced simultaneously. The combined effects of lower salinity and lower pH also affected negatively the ability of pteropods to swim upwards. Results suggest that the energy cost of maintaining ion balance and avoiding sinking (in low salinity scenario) combined with the extra energy cost necessary to counteract shell dissolution (in high pCO2 scenario), exceed the available energy budget of this organism causing the pteropods to change swimming behavior and begin to collapse. Since L. retroversa play an important role in the transport of carbonates to the deep oceans these findings have significant implications for the mechanisms influencing the inorganic carbon cycle in the sub-polar area.

Sex-specific foraging during parental care in a size-monomorphic seabird

Sex differences in foraging behaviour are typically studied in size-dimorphic taxa. Data on sex-specific behavior in monomorphic taxa are needed to test theories of reproductive investment. It has been suggested that in seabirds foraging niche separation may be related to decreased intersexual competition for food between cooperating pair-bonded individuals. Alternatively, sex differences in foraging niches may be driven by different nutritional requirements of females associated with the reproductive costs of egg production and oviposition. To assess these possibilities, we studied a size-monomorphic colonial seabird, the Australasian Gannet (Morus serrator) at the Cape Kidnappers gannetry, New Zealand. We recorded maximum dive depths, and distinct diet composition of incubating females as indicated by stable isotopic signatures. Results suggested greater female foraging effort during early times of incubation, indicated by significantly deeper maximum dives. Sex-specific foraging patterns across other breeding stages were more variable. Nitrogen stable isotopic values showed that incubating females occupied a different trophic position compared to males at the same breeding stage, and also from those of gannets of both sexes at later stages of parental care. Overall, the data are consistent with cost-of-oviposition compensation in females necessitating male-bias in parental care in biparental breeders. Further research is needed to unravel the implications for the evolution of sex differences in behavior in this and other monomorphic taxa.

Automatic-dependent surveillance-broadcast experimental deployment using system wide information management

This paper describes an automatic-dependent surveillance-broadcast (ADS-B) implementation for air-to-air and ground-based experimental surveillance within a prototype of a fully automated air traffic management (ATM) system, under a trajectory-based-operations paradigm. The system is built using an air-inclusive implementation of system wide information management (SWIM). This work describes the relations between airborne and ground surveillance (SURGND), the prototype surveillance systems, and their algorithms. System's performance is analyzed with simulated and real data. Results show that the proposed ADS-B implementation can fulfill the most demanding surveillance accuracy requirements.

Novel Negotiation protocol to support CDM process in a layered ATM System

In the SESAR Step 2 concept of operations a RBT is available and seen by all making it possible to conceive a different operating method than the current ATM system based on Collaborative Decisions Making processes. Currently there is a need to describe in more detail the mechanisms by which actors (ATC, Network Management, Flight Crew, airports and Airline Operation Centre) will negotiate revisions to the RBT. This paper introduces a negotiation model, which uses constraint based programing applied to a mediator to facilitate negotiation process in a SWIM enabled environment. Three processes for modelling the negotiation process are explained as well a preliminary reasoning agent algorithm modelled with constraint satisfaction problem is presented. Computational capability of the model is evaluated in the conclusion.

BR3: a biologically inspired fish-like robot actuated by SMA-based artificial muscles

Los peces son animales, donde en la mayoría de los casos, son considerados como nadadores muy eficientes y con una alta capacidad de maniobra. En general los peces se caracterizan por su capacidad de maniobra, locomoción silencioso, giros y partidas rápidas y viajes de larga distancia. Los estudios han identificado varios tipos de locomoción que los peces usan para generar maniobras y natación constante. A bajas velocidades la mayoría de los peces utilizan sus aletas pares y / o impares para su locomoción, que ofrecen una mayor maniobrabilidad y mejor eficiencia de propulsión. A altas velocidades la locomoción implica el cuerpo y / o aleta caudal porque esto puede lograr un mayor empuje y aceleración. Estas características pueden inspirar el diseo y fabricación de una piel muy flexible, una aleta caudal mórfica y una espina dorsal no articulada con una gran capacidad de maniobra. Esta tesis presenta el desarrollo de un novedoso pez robot bio-inspirado y biomimético llamado BR3, inspirado en la capacidad de maniobra y nado constante de los peces vertebrados. Inspirado por la morfología de los peces Micropterus salmoides o también conocido como lubina negra, el robot BR3 utiliza su fundamento biológico para desarrollar modelos y métodos matemáticos precisos que permiten imitar la locomoción de los peces reales. Los peces Largemouth Bass pueden lograr un nivel increíble de maniobrabilidad y eficacia de la propulsión mediante la combinación de los movimientos ondulatorios y aletas morficas. Para imitar la locomoción de los peces reales en una contraparte artificial se necesita del análisis de tecnologías de actuación alternativos, como arreglos de fibras musculares en lugar de servo actuadores o motores DC estándar, así como un material flexible que proporciona una estructura continua sin juntas. Las aleaciones con memoria de forma (SMAs) proveen la posibilidad de construir robots livianos, que no emiten ruido, sin motores, sin juntas y sin engranajes. Asi es como un pez robot submarino se ha desarrollado y cuyos movimientos son generados mediante SMAs. Estos actuadores son los adecuados para doblar la espina dorsal continua del pez robot, que a su vez provoca un cambio en la curvatura del cuerpo. Este tipo de arreglo estructural está inspirado en los músculos rojos del pescado, que son usados principalmente durante la natación constante para la flexión de una estructura flexible pero casi incompresible como lo es la espina dorsal de pescado. Del mismo modo la aleta caudal se basa en SMAs y se modifica para llevar a cabo el trabajo necesario. La estructura flexible proporciona empuje y permite que el BR3 nade. Por otro lado la aleta caudal mórfica proporciona movimientos de balanceo y guiada. Motivado por la versatilidad del BR3 para imitar todos los modos de natación (anguilliforme, carangiforme, subcarangiforme y tunniforme) se propone un controlador de doblado y velocidad. La ley de control de doblado y velocidad incorpora la información del ángulo de curvatura y de la frecuencia para producir el modo de natación deseado y a su vez controlar la velocidad de natación. Así mismo de acuerdo con el hecho biológico de la influencia de la forma de la aleta caudal en la maniobrabilidad durante la natación constante se propone un control de actitud. Esta novedoso robot pescado es el primero de su tipo en incorporar sólo SMAs para doblar una estructura flexible continua y sin juntas y engranajes para producir empuje e imitar todos los modos de natación, así como la aleta caudal que es capaz de cambiar su forma. Este novedoso diseo mecatrónico presenta un futuro muy prometedor para el diseo de vehículos submarinos capaces de modificar su forma y nadar mas eficientemente. La nueva metodología de control propuesto en esta tesis proporcionan una forma totalmente nueva de control de robots basados en SMAs, haciéndolos energéticamente más eficientes y la incorporación de una aleta caudal mórfica permite realizar maniobras más eficientemente. En su conjunto, el proyecto BR3 consta de cinco grandes etapas de desarrollo: • Estudio y análisis biológico del nado de los peces con el propósito de definir criterios de diseño y control. • Formulación de modelos matemáticos que describan la: i) cinemática del cuerpo, ii) dinámica, iii) hidrodinámica iv) análisis de los modos de vibración y v) actuación usando SMA. Estos modelos permiten estimar la influencia de modular la aleta caudal y el doblado del cuerpo en la producción de fuerzas de empuje y fuerzas de rotación necesarias en las maniobras y optimización del consumo de energía. • Diseño y fabricación de BR3: i) estructura esquelética de la columna vertebral y el cuerpo, ii) mecanismo de actuación basado en SMAs para el cuerpo y la aleta caudal, iii) piel artificial, iv) electrónica embebida y v) fusión sensorial. Está dirigido a desarrollar la plataforma de pez robot BR3 que permite probar los métodos propuestos. • Controlador de nado: compuesto por: i) control de las SMA (modulación de la forma de la aleta caudal y regulación de la actitud) y ii) control de nado continuo (modulación de la velocidad y doblado). Está dirigido a la formulación de los métodos de control adecuados que permiten la modulación adecuada de la aleta caudal y el cuerpo del BR3. • Experimentos: está dirigido a la cuantificación de los efectos de: i) la correcta modulación de la aleta caudal en la producción de rotación y su efecto hidrodinámico durante la maniobra, ii) doblado del cuerpo para la producción de empuje y iii) efecto de la flexibilidad de la piel en la habilidad para doblarse del BR3. También tiene como objetivo demostrar y validar la hipótesis de mejora en la eficiencia de la natación y las maniobras gracias a los nuevos métodos de control presentados en esta tesis. A lo largo del desarrollo de cada una de las cinco etapas, se irán presentando los retos, problemáticas y soluciones a abordar. Los experimentos en canales de agua estarán orientados a discutir y demostrar cómo la aleta caudal y el cuerpo pueden afectar considerablemente la dinámica / hidrodinámica de natación / maniobras y cómo tomar ventaja de la modulación de curvatura que la aleta caudal mórfica y el cuerpo permiten para cambiar correctamente la geometría de la aleta caudal y del cuerpo durante la natación constante y maniobras. ABSTRACT Fishes are animals where in most cases are considered as highly manoeuvrable and effortless swimmers. In general fishes are characterized for his manoeuvring skills, noiseless locomotion, rapid turning, fast starting and long distance cruising. Studies have identified several types of locomotion that fish use to generate maneuvering and steady swimming. At low speeds most fishes uses median and/or paired fins for its locomotion, offering greater maneuverability and better propulsive efficiency At high speeds the locomotion involves the body and/or caudal fin because this can achieve greater thrust and accelerations. This can inspire the design and fabrication of a highly deformable soft artificial skins, morphing caudal fins and non articulated backbone with a significant maneuverability capacity. This thesis presents the development of a novel bio-inspired and biomimetic fishlike robot (BR3) inspired by the maneuverability and steady swimming ability of ray-finned fishes (Actinopterygii, bony fishes). Inspired by the morphology of the Largemouth Bass fish, the BR3 uses its biological foundation to develop accurate mathematical models and methods allowing to mimic fish locomotion. The Largemouth Bass fishes can achieve an amazing level of maneuverability and propulsive efficiency by combining undulatory movements and morphing fins. To mimic the locomotion of the real fishes on an artificial counterpart needs the analysis of alternative actuation technologies more likely muscle fiber arrays instead of standard servomotor actuators as well as a bendable material that provides a continuous structure without joins. The Shape Memory Alloys (SMAs) provide the possibility of building lightweight, joint-less, noise-less, motor-less and gear-less robots. Thus a swimming underwater fish-like robot has been developed whose movements are generated using SMAs. These actuators are suitable for bending the continuous backbone of the fish, which in turn causes a change in the curvature of the body. This type of structural arrangement is inspired by fish red muscles, which are mainly recruited during steady swimming for the bending of a flexible but nearly incompressible structure such as the fishbone. Likewise the caudal fin is based on SMAs and is customized to provide the necessary work out. The bendable structure provides thrust and allows the BR3 to swim. On the other hand the morphing caudal fin provides roll and yaw movements. Motivated by the versatility of the BR3 to mimic all the swimming modes (anguilliform, caranguiform, subcaranguiform and thunniform) a bending-speed controller is proposed. The bending-speed control law incorporates bend angle and frequency information to produce desired swimming mode and swimming speed. Likewise according to the biological fact about the influence of caudal fin shape in the maneuverability during steady swimming an attitude control is proposed. This novel fish robot is the first of its kind to incorporate only SMAs to bend a flexible continuous structure without joints and gears to produce thrust and mimic all the swimming modes as well as the caudal fin to be morphing. This novel mechatronic design is a promising way to design more efficient swimming/morphing underwater vehicles. The novel control methodology proposed in this thesis provide a totally new way of controlling robots based on SMAs, making them more energy efficient and the incorporation of a morphing caudal fin allows to perform more efficient maneuvers. As a whole, the BR3 project consists of five major stages of development: • Study and analysis of biological fish swimming data reported in specialized literature aimed at defining design and control criteria. • Formulation of mathematical models for: i) body kinematics, ii) dynamics, iii) hydrodynamics, iv) free vibration analysis and v) SMA muscle-like actuation. It is aimed at modelling the e ects of modulating caudal fin and body bend into the production of thrust forces for swimming, rotational forces for maneuvering and energy consumption optimisation. • Bio-inspired design and fabrication of: i) skeletal structure of backbone and body, ii) SMA muscle-like mechanisms for the body and caudal fin, iii) the artificial skin, iv) electronics onboard and v) sensor fusion. It is aimed at developing the fish-like platform (BR3) that allows for testing the methods proposed. • The swimming controller: i) control of SMA-muscles (morphing-caudal fin modulation and attitude regulation) and ii) steady swimming control (bend modulation and speed modulation). It is aimed at formulating the proper control methods that allow for the proper modulation of BR3’s caudal fin and body. • Experiments: it is aimed at quantifying the effects of: i) properly caudal fin modulation into hydrodynamics and rotation production for maneuvering, ii) body bending into thrust generation and iii) skin flexibility into BR3 bending ability. It is also aimed at demonstrating and validating the hypothesis of improving swimming and maneuvering efficiency thanks to the novel control methods presented in this thesis. This thesis introduces the challenges and methods to address these stages. Waterchannel experiments will be oriented to discuss and demonstrate how the caudal fin and body can considerably affect the dynamics/hydrodynamics of swimming/maneuvering and how to take advantage of bend modulation that the morphing-caudal fin and body enable to properly change caudal fin and body’ geometry during steady swimming and maneuvering.

Mecanismos implicados en las etapas iniciales de infección en la cancrosis de los cítricos provocada por Xanthomonas citri subsp. citri

La cancrosis o chancro bacteriano de los cítricos (CBC) causada por Xanthomonas citri subsp. citri (Xcc) y X. fuscans subsp. aurantifolii, afecta a un gran número de especies dentro de la familia de las rutáceas, especialmente cítricos. Esta enfermedad produce graves pérdidas económicas allí donde está presente, principalmente porque la comercialización de cítricos desde las zonas afectadas hacía zonas libres de cancrosis, está sujeta a fuertes medidas cuarentenarias. La cancrosis se encuentra distribuida a nivel mundial pero no se ha localizado ni en la Unión Europea ni en ningún área del Mediterráneo. Se han descrito tres tipos de cancrosis en función de la gama de huésped y de las características fenotípicas y genotípicas de las bacterias que las producen. La más extendida es la cancrosis tipo A producida por Xcc, dentro de la cual se distinguen los subtipos Aw y A*, originarios de Florida y Sudeste Asiático, respectivamente, que de forma natural solo son capaces de producir enfermedad en lima mejicana. En este trabajo se presentan estudios sobre mecanismos implicados en las primeras etapas de la infección, como la quimiotaxis y formación de biopelículas, en la cancrosis de los cítricos. La quimiotaxis es el proceso por el cual las bacterias se dirigen hacia zonas favorables para su supervivencia y desarrollo. Los perfiles quimiotácticos obtenidos frente a distintas fuentes de carbono, así como los estudios en relación al contenido de proteínas aceptoras de grupos metilo (MCPs), permitieron agrupar a las cepas de Xanthomonas estudiadas en este trabajo, de acuerdo a la enfermedad producida y a su gama de huésped. Todas las cepas mostraron quimiotaxis positiva frente a extractos de hoja y apoplasto de diferentes especies, sin embargo, Xcc 306, X. alfalfae subsp. citrumelonis (Xac) y X. campestris pv. campestris (Xc) manifestaron respuestas más específicas frente a extractos de apoplasto de hojas de naranjo dulce, lima y col china, respectivamente. Dicho resultado nos permite asociar el mecanismo de quimiotaxis con la capacidad de las cepas de Xanthomonas para colonizar estos huéspedes de forma específica. Las cepas estudiadas fueron capaces de realizar movimiento tipo swimming, twitching y sliding en distintos medios, siendo el movimiento swimming el único en el que se encontraron diferencias entre las cepas de Xcc con distinta gama de huésped. En este trabajo se ha estudiado además la formación de biopelículas en superficies bióticas y abióticas, un mecanismo importante tanto para la supervivencia en superficie vegetal como para el desarrollo de la infección. Las cepas de Xanthomonas estudiadas fueron capaces de formar biopelículas in vitro, siendo mayor en un medio que simula el apoplasto y que contiene una baja concentración de nutrientes en comparación con medios que contenían alta concentración de nutrientes. La formación de biopelículas en superficie vegetal se encontró relacionada, en las cepas patógenas de cítricos, con la capacidad para infectar un tejido o huésped determinado. Se han caracterizado algunos de los componentes de la matriz extracelular producida por Xcc, que compone hasta un 90% de las bipoelículas. Entre ellos destaca el ADN extracelular, que tiene un papel como adhesina en las primeras etapas de formación de biopelículas y estructural en biopelículas maduras. Además, se han identificado el pilus tipo IV como componente importante en las biopelículas, que también participa en motilidad. Finalmente, se han realizado estudios sobre la expresión de genes implicados en motilidad bacteriana y formación de biopelículas que han confirmado las diferencias existentes entre cepas de Xcc de amplia y limitada gama de huésped, así como el papel que juegan elementos como el pilus tipo IV o el flagelo en estos procesos. ABSTRACT Xanthomonas citri subsp. citri (Xcc) and X. fuscans subsp. aurantifolii are the causal agents of Citrus Bacterial Canker (CBC) which is one of the most important citrus diseases. CBC affects all Citrus species as well as other species from Rutaceae family. CBC produces strong economic losses; furthermore the commercialization of plants and fruits is restricted from infested to citrus canker free areas. The disease is worldwide distributed in tropical and subtropical areas, however it is not present in the European Union. Three types of CBC have been described according to the host range and phenotypic and genotypic characteristics. CBC type A caused by Xcc is he widest distributed. Within CBC A type two subtypes Aw and A* were described from Florida and Iran respectively, both infecting only Mexican lime. Herein mechanisms connected to early events in the citrus bacterial canker disease such as chemotaxis and biofilm formation, were studied. Chemotaxis allows bacteria to move towards the more suitable environments for its survival, host colonization and infection. Studies performed on citrus pathogenic Xanthomonas and X. campestris pv. campestris (Xc), a crucifer pathogen, have shown different chemotactic profiles towards carbon compound as well as different MCPs profile, which clustered strains according to host range and disease caused. Every strain showed positive chemotaxis toward leaf extracts and apoplastic fluids from sweet orange, Mexican lime and Chinese cabbage leaves. However, a more specific response was found for strains Xcc 306, X. alfalfae subsp. citrumelonis and Xc towards sweet orange, Mexican lime and Chinese cabbage apoplastic fluids, respectively. These results relate chemotaxis with the higher ability of those strains to specifically colonize their proper host. Xanthomonas strains studied were able to perform swimming, sliding and twitching motilities. The ability to swim was variable among CBC strains and seemed related to host range. Biofilm formation is an important virulence factor for Xcc because it allows a better survival onto the plant surface as well as facilitates the infection process. The studied Xanthomonas strains were able to form biofilm in vitro, on both nutrient rich and apoplast mimicking media, furthermore the biofilm formation by all the strains was higher in the apoplast mimicking media. The ability to form biofilm in planta by Xcc and Xac strains was dependent of the host and the tissue colonized. The wide host range CBC strain was able to form biofilm onto several citrus leaves and fruits, however the limited host range CBC strain produced biofilm solely onto Mexican lime leaves and fruits. Furthermore Xac strain, which solely infects leaves of young plants, was not able to develop biofilms on fruits. Some components of the extracellular matrix produced by Xcc strains have been characterized. Extracellular DNA acted as an adhesin at the very early stages of biofilm formation and as structural component of mature biofilm for citrus pathogenic Xanthomonas. Furthermore type IV pilus has been identified as a component of the extracellular matrix in biofilm and motility. Transcriptional studies of genes related with biofilm formation and motility have confirmed the differential behavior found among wide and limited host range CBC strains as well as the role of type IV pili and flagellum on those processes.