447 resultados para Supervisory
Resumo:
This work proposes a computer simulator for sucker rod pumped vertical wells. The simulator is able to represent the dynamic behavior of the systems and the computation of several important parameters, allowing the easy visualization of several pertinent phenomena. The use of the simulator allows the execution of several tests at lower costs and shorter times, than real wells experiments. The simulation uses a model based on the dynamic behavior of the rod string. This dynamic model is represented by a second order partial differencial equation. Through this model, several common field situations can be verified. Moreover, the simulation includes 3D animations, facilitating the physical understanding of the process, due to a better visual interpretation of the phenomena. Another important characteristic is the emulation of the main sensors used in sucker rod pumping automation. The emulation of the sensors is implemented through a microcontrolled interface between the simulator and the industrial controllers. By means of this interface, the controllers interpret the simulator as a real well. A "fault module" was included in the simulator. This module incorporates the six more important faults found in sucker rod pumping. Therefore, the analysis and verification of these problems through the simulator, allows the user to identify such situations that otherwise could be observed only in the field. The simulation of these faults receives a different treatment due to the different boundary conditions imposed to the numeric solution of the problem. Possible applications of the simulator are: the design and analysis of wells, training of technicians and engineers, execution of tests in controllers and supervisory systems, and validation of control algorithms
Resumo:
Outsourcing has emerged as one of the new ways of guiding the work. For its advantages and be consistent with the paradigms of managerial reform, outsourcing also started to be used in the Public Administration. However, taking into account the particularities of the latter, some issues are relevant when outsourcing concluded with the State. Gains notoriety, for example, the step of monitoring these contracts, to the extent that, from this activity, we can avoid the negative effects of outsourcing like the fact that the state will pay for labor and wage liens that are obligation of the company providing the services. This study aims to understand the perception that this process is under the Federal University of Rio Grande do Norte, from the point of view of different stakeholders, also explaining the motivations that these agents have to perform the supervisory process. As a theoretical basis was used the Agency Theory, which reinforces the supervisory activities as a necessary means to minimize moral hazard and adverse selection, seeking to understand not only the different motivations tax contracts to properly perform their duties, but also analyze other phenomena arising from this contractual relationship. To achieve the proposed objectives, were taken a literature review and a presentation of how to organize the management and oversight of contracts in UFRN. The methodological procedures included questionnaires and interviews with those involved in the process. After analyzing the results obtained in the survey instruments , and also based on the laws, regulations and instructions governing the procurement process within the UFRN, it was concluded that the process of overseeing the outsourcing of labor contracts in UFRN is not fully institutionalized, some points should be strengthened in order to have the consolidation of this process, highlighting the need for training of UFRN servers that act as tax, the knowledge that the contractual penalties are applied effectively, the need that there is a supervisor of tax of contractors and also the realization of the rotation system of outsourced employees
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Includes bibliography
Resumo:
Ionospheric scintillations can seriously jeopardize the reliability of the GNSS signals and consequently can cause significant error or outage on precise positioning applications. The threat is most acute at low latitudes where ionospheric irregularities are more likely to occur resulting in L-band signal scintillations. This paper describes the effort made to model the ionospheric scintillations over the Latin American region in the frame of the CIGALA project funded by the European GNSS Supervisory Authority within the 7th Framework Programme of the European Commission. Comparisons between the low-latitude model of scintillations and observations are here presented and discussed within the project perspectives. © 2011 IEEE.
Resumo:
In this paper we describe the development of a low-cost high-accuracy Galileo Code receiver, user application software and positioning algorithms for land management applications, which have been implemented using a dedicated FPGA board and dual frequency Galileo E5/L1 Radio Frequency Front-End. The current situation of rural property surveying in Brazil is described and the use of code measurements from the new Galileo signals E5 AltBOC combined with E1 MBOC for use in land management applications is explored. We explain how such approach is expected to allow delivering an absolute positioning solution which could bridge the gap between receivers of high cost/complexity/accuracy based on carrier phase and receivers of lower cost/accuracy based on pseudorange observables. The system is presented together with a detailed description of main components: the Code Receiver and the Application Software. The work presented is part of an ongoing European-Brazilian consortium effort to explore the use of new Galileo for land management applications in Brazil and sponsored by the GNSS Supervisory Authority (GSA).
Resumo:
This work describes a hardware/software co-design system development, named IEEE 1451 platform, to be used in process automation. This platform intends to make easier the implementation of IEEE standards 1451.0, 1451.1, 1451.2 and 1451.5. The hardware was built using NIOS II processor resources on Alteras Cyclone II FPGA. The software was done using Java technology and C/C++ for the processors programming. This HW/SW system implements the IEEE 1451 based on a control module and supervisory software for industrial automation. © 2011 Elsevier B.V.
Resumo:
Includes bibliography
Resumo:
Includes bibliography
Resumo:
The factors that have influence on the energy consumption of a small air conditioning system that are worth mentioning are the efficiencies of the compressor, evaporator and condenser, the form that the refrigerant flow is controlled, the fan model used, and climatic conditions. Within the climate issue, an interesting factor is that the relative humidity when it comes to the effect that it causes, especially in the performance of the air condenser, which generally is not considered in the projects. This study aims to evaluate the influence of humidity on the coefficient of system performance (COP), seeking to quantify their influence when it happens. The tests were performed on a testing bench, mounted at the Laboratory for Energy Efficiency (LAMOTRIZ) UNESP-Campus Guaratinguetá. In the study, the wet bulb temperature was ranged, keeping the rotation of the scroll compressor with application of a frequency inverter in its best performance. The test bench is provided with a supervisory system of data collection that is also able to control all functions of the bench. In the results, there was a significant influence, particularly when comparing high humidity conditions with low humidity, noting that only over 65% relative humidity is that significant changes are observed in the COP of the system. © 2013 Elsevier Inc.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Resumo:
Pós-graduação em Ciências Sociais - FFC
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)