Responses of Dental Pulp Cells to a Less Invasive Bleaching Technique Applied to Adhesively Restored Teeth

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Longitudinal evaluation of bond strength to enamel of dental adhesive systems associated with Nd:YAG laser

Objectives: This study evaluated the durability of bond strength to enamel using total-etch (Single Bond/SB) and self-etch (Clearfil SE Bond/CSEB) adhesives associated with neody-mium: yttrium-aluminu- garnet (Nd:YAG) laser irradiation through the uncured adhesives.Methods: Bovine incisors were worn to expose an area of enamel and were divided into four groups: group 1 (control) SB + polymerization; group 2 (control) CSEB + polymerization; group 3 (laser) - B + Nd:YAG laser (174.16 J/cm(2)) + polymerization; and group 4 (laser) CSEB + Nd:YAG (174.16 J/cm(2)) + polymerization. Blocks of composite were fabricated and stored for 24 hours or 12 months, sectioned into beams, and submitted to microtensile tests. Results were analyzed by three-way analysis of variance (ANOVA) (adhesive, technique, and storage time) and Tukey tests.Results: ANOVA revealed significant differences for adhesive 3 technique and technique 3 storage time (p<0.05). The mean values (MPa) for interaction adhesive x technique (standard deviation) were as follows: SB/control = 35.78 (6.04)a; SB/laser = 26.40 (7.25)b, CSEB/control = 26.32 (5.71)b, CSEB/laser = 23.90 (7.49)b. For interaction technique x storage time the mean values were as follows: control/24 hours = 32.58 (6.49)a; control/12 months = 29.52 (8.38)a; laser/24 hours = 29.37 (5.71)a; laser/12 months = 20.92 (6.5)b. Groups with the same letters showed no statistically significant differences.Conclusion: Scanning electron microscope analysis showed evident areas of micromorphological alterations in lased samples after 12 months of water storage. Nd: YAG laser irradiation of enamel through unpolymerized totaletch adhesive significantly reduced bond strength compared with the control. Bond strength decreased when enamel samples irradiated with Nd: YAG laser through unpolymerized adhesives were stored in water for 12 months.

Influência de agentes clareadores na resistência de união de um sistema restaurador ao esmalte em função do tempo de armazenamento em saliva artificial

Pós-graduação em Odontologia Restauradora - ICT

Efeito da desinfecção e do tempo de armazenagem na molhabilidade de moldes de alginato

The cares at the manipulation of the alginate (condensation, disinfection of the impression and the time elapsed until the leak of the plaster) deserve special attention considering the great amount of distortions occurring every time the impression is not fill of plaster in a brief space of time and appropriate storage conditions. Besides its adaptation to the plaster suffers influence of the events happened after the impression is removed of the mouth. The purpose of this research was to evaluate the wetting capacity of three brands of alginate (Jeltrate™,Hydrogum™ e Orthoprint™) by the plaster type III (Rio™) under the influence of disinfection by sodium hypochlorite 1% sprays and the time of storage of 15 minutes,30 minutes, 1 hour, 6, 12 and 24 hours. There were made 60 impressions of each brand of alginate divided in two groups (water and sodium hypochlorite 1%) rearranged after the application of the sodium hypochlorite spray according to the storage time (15 or 30 minutes and 1,6,12, or 24 hours). On the surface of the impressions 2ml of plaster were flowed, proportioned and condensed in agreement with manufacturer‘s instructions. After the final setting expansion the casts were sectioned vertically and medially, regularized at the cut surface (emery paper 400) and setted for reading the contact angle at the microscope Carl Zeiss. The obtained results, submitted to statistical treatment (ANOVA) revealed significant differences when compared the employed solutions (water and sodium hypochlorite 1%) and the time of storage. The sodium hypochlorite 1% exhibited the smallest contact angles and the times of storage of 15 minutes and 6 hours the smallest and larger angles, respectively. It can be concluded that the alginate impressions exhibited larger adaptation to the plaster when disinfected by hypochlorite of sodium 1% and stocked by 15 minutes.

Spectrophotometric evaluation of color changes of esthetic brackets stored in potentially staining solutions

The purpose of this study was to evaluate, in vitro, the chromatic behavior of esthetic brackets stored in potentially staining solutions. The sample were divided into four groups according to the commercial brand and stored in four different solutions (distilled water, cola soda, coffee and mouthrinse) at 37°C for 14 days. Possible color changes measured according to the CIE L*a*b* color system with a spectrophotometer at five intervals of time after storage. The statistical analysis was carried out using ANOVA to 1%, Tukey's tests and decomposition of interactions with a significance level of 5%.The color changes were dependent on the solution, storage time and the brand of brackets. The largest color changes were observed in the G3, followed by G2, G1/G4. The esthetic brackets do not present satisfactory and stable chromatic behavior.

Eletro narcose como método de insensibilização para a tilápia do Nilo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Obtenção de massa de mandioca com adição de maltodextrina de amido de milho waxy

This study aimed to the development of cassava mashed with added maltodextrin of waxy maize starch as an alternative to the semi-ready product. The experimental design was completely randomized using blocks in 4x7 factorial, with three replications. The treatments were the combination of maltodextrin concentrations added in the cassava mass (0, 5, 10 and 15% on dry weight) with storage time (0, 2, 4, 6, 8, 10 and 12 days after preparation) and two condition (environment and refrigerated temperature). The variety chosen to the processing was the IAC 576-70. The data were subjected to variance analysis. The means were compared by Tukey test at 5%. The content of maltodextrin from waxy maize starch to 15% was effective in controlling the increase of texture. The mass of cassava with the addition of maltodextrin showed to be product of easy preparation, showin IAC 576-70g viability to be produced in industrial scale.

Adubação potássica na produção e qualidade pós-colheita do rabanete

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Secagem por atomização do suco de uva: microencapsulação das antocianinas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Ação do ácido abscísico na cor das bagas, na qualidade e no armazenamento pós-colheita da uva Rubi

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Alterações na composição química e sensorial de café (Coffea arabica L.) nos processos pós-colheita

An interdisciplinary study was conducted to evaluate the effects of drying and storage time on changes in the quality of natural and fully washed coffees beans dried out in the yard and mechanically dried at a temperature of 60/40°C in air dryer machine. The coffee beans (Coffea arabica L.) harvested in cherries were processed by dry and wet methods, being subjected to pre-drying yard, followed by drying yard in the sun with air heated of 60/40°C until it reached the water content of 11% (wb). After reached the thermal equilibrium with the environment, the beans were packed in jute bag with a capacity of five kilograms and stored in uncontrolled environment during the period of one year, and removing material from each treatment every three months. To characterize the effect of drying and storage time on the coffee quality different methodologies was evaluated. It was observed less drying time for the fully washed coffee 60/40°C, and thus less energy consumed in the drying process until the point of storage, for the natural coffee there was significant effect of time on the chemical quality, biochemical and sensory; fully washed coffee proved to be more tolerant to drying than natural coffee, regardless of drying method, showing a better drink quality and less variation in chemical composition and biochemistry.

Qualidade pós-colheita dos frutos de jabuticaba tratada por hidrotermia

This study aimed to evaluate the hydrothermal effect on conservation of two jabuticaba fruits, Myrciaria jabuticaba Vell. Berg. Fruits were subjected to thermal treatment by 10 min at 5, 10, 15, 20 and 25 ºC and wrapped into expanded polystyrene trays, stored at 9 ºC and 85-90% RH, being evaluated every 5 d. Shelf life, weight loss, respiratory rate, soluble solids, titrable acidity, texture, C vitamin, pH, total and soluble pectin and polypheno loxidase activity were evaluated. Lower shelf life was observed for control treatment (31 d) and largest was found at 15, 20 and 25 ºC (45 d). A sligthly delay was observed in the breathing pick at 15, 20 and 25 ºC at 25 d and not in the 20 d as observed in the other treatments. Soluble solids increased with storage time for all of temperature treatment, but at 15, 20 and 25 ºC increase was smaller. Texture an C vitamin were higher in fruits stored at 25 ºC. Soluble pectin was smaller at the end of storage period, at temperatures of 20 and 25 ºC. Polyphenoloxidase activity decreased along 30 d regardless storage temperature. Treatments at 20 and 25 ºC were the most effective for mainteining posthaverst quality of the jabuticaba fruits.

Adição de maltodextrina e farelo de mandioca na formulação de sorvetes

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Duração da qualidade de ovos estocados de poedeiras criadas no sistema “cage-free”

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação imediata e após 6 meses da resistência de união a dentina de restaurações de resina composta classe I in vivo e in vitro

Pós-graduação em Odontologia Restauradora - ICT